remove some outdated changes

Co-Authored-By: Ryan <fauxpark@gmail.com>

.gitattributes

@@ -92,4 +92,3 @@ GRAPHICS
 # hex files
 *.hex binary
 *.eep binary
-nix/sources.nix linguist-generated=true

.github/labeler.yml

@@ -22,6 +22,7 @@ keymap:
 via:
   - keyboards/**/keymaps/via/*
 cli:
+  - bin/qmk
   - requirements.txt
   - lib/python/**/*
 python:

.github/workflows/api.yml

@@ -7,12 +7,11 @@ on:
     paths:
     - 'keyboards/**'
     - 'layouts/community/**'
-  workflow_dispatch:
 
 jobs:
   api_data:
     runs-on: ubuntu-latest
-    container: qmkfm/qmk_cli
+    container: qmkfm/base_container
 
     # protect against those who develop with their fork on master
     if: github.repository == 'qmk/qmk_firmware'
@@ -26,13 +25,18 @@ jobs:
     - name: Generate API Data
       run: qmk generate-api
 
+    - name: Install rsync
+      run: |
+        apt-get update && apt-get install -y rsync
+
     - name: Upload API Data
-      uses: jakejarvis/s3-sync-action@master
+      uses: JamesIves/github-pages-deploy-action@3.7.1
       with:
-        args: --acl public-read --follow-symlinks --delete
-      env:
-        AWS_S3_BUCKET: ${{ secrets.API_SPACE_MASTER }}
-        AWS_ACCESS_KEY_ID: ${{ secrets.SPACES_ACCESS_KEY }}
-        AWS_SECRET_ACCESS_KEY: ${{ secrets.SPACES_SECRET_KEY }}
-        AWS_S3_ENDPOINT: https://nyc3.digitaloceanspaces.com
-        SOURCE_DIR: 'api_data'
+        ACCESS_TOKEN: ${{ secrets.API_TOKEN_GITHUB }}
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        BRANCH: main
+        FOLDER: api_data/v1
+        CLEAN: true
+        GIT_CONFIG_EMAIL: hello@qmk.fm
+        REPOSITORY_NAME: qmk/qmk_keyboards
+        TARGET_FOLDER: v1

.github/workflows/cli.yml

@@ -4,10 +4,11 @@ on:
   push:
     branches:
     - master
-    - develop
+    - future
   pull_request:
     paths:
     - 'lib/python/**'
+    - 'bin/qmk'
     - 'requirements.txt'
     - '.github/workflows/cli.yml'
 
@@ -15,13 +16,13 @@ jobs:
   test:
     runs-on: ubuntu-latest
 
-    container: qmkfm/qmk_cli
+    container: qmkfm/base_container
 
     steps:
     - uses: actions/checkout@v2
       with:
         submodules: recursive
     - name: Install dependencies
-      run: pip3 install -r requirements-dev.txt
+      run: pip3 install -r requirements.txt
     - name: Run tests
-      run: qmk pytest
+      run: bin/qmk pytest

.github/workflows/develop_api.yml

@@ -7,12 +7,11 @@ on:
     paths:
     - 'keyboards/**'
     - 'layouts/community/**'
-  workflow_dispatch:
 
 jobs:
   api_data:
     runs-on: ubuntu-latest
-    container: qmkfm/qmk_cli
+    container: qmkfm/base_container
 
     # protect against those who work in their fork on develop
     if: github.repository == 'qmk/qmk_firmware'
@@ -26,13 +25,18 @@ jobs:
     - name: Generate API Data
       run: qmk generate-api
 
+    - name: Install rsync
+      run: |
+        apt-get update && apt-get install -y rsync
+
     - name: Upload API Data
-      uses: jakejarvis/s3-sync-action@master
+      uses: JamesIves/github-pages-deploy-action@3.7.1
       with:
-        args: --acl public-read --follow-symlinks --delete
-      env:
-        AWS_S3_BUCKET: ${{ secrets.API_SPACE_DEVELOP }}
-        AWS_ACCESS_KEY_ID: ${{ secrets.SPACES_ACCESS_KEY }}
-        AWS_SECRET_ACCESS_KEY: ${{ secrets.SPACES_SECRET_KEY }}
-        AWS_S3_ENDPOINT: https://nyc3.digitaloceanspaces.com
-        SOURCE_DIR: 'api_data'
+        ACCESS_TOKEN: ${{ secrets.API_TOKEN_GITHUB }}
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        BRANCH: main
+        FOLDER: api_data/v1
+        CLEAN: true
+        GIT_CONFIG_EMAIL: hello@qmk.fm
+        REPOSITORY_NAME: qmk/qmk_keyboards_devel
+        TARGET_FOLDER: v1

.github/workflows/docs.yml

@@ -14,7 +14,7 @@ on:
 jobs:
   generate:
     runs-on: ubuntu-latest
-    container: qmkfm/qmk_cli
+    container: qmkfm/base_container
 
     # protect against those who develop with their fork on master
     if: github.repository == 'qmk/qmk_firmware'

.github/workflows/format.yaml

@@ -1,51 +1,43 @@
-name: PR Lint Format
+name: Format Codebase
 
 on:
-  pull_request:
-    paths:
-    - 'drivers/**'
-    - 'lib/arm_atsam/**'
-    - 'lib/lib8tion/**'
-    - 'lib/python/**'
-    - 'platforms/**'
-    - 'quantum/**'
-    - 'tests/**'
-    - 'tmk_core/**'
+  push:
+    branches:
+    - master
 
 jobs:
-  lint:
+  format:
     runs-on: ubuntu-latest
+    container: qmkfm/base_container
 
-    container: qmkfm/qmk_cli
+    # protect against those who develop with their fork on master
+    if: github.repository == 'qmk/qmk_firmware'
 
     steps:
+    - uses: actions/checkout@v2
+      with:
+        token: ${{ secrets.API_TOKEN_GITHUB }}
+
     - name: Install dependencies
       run: |
         apt-get update && apt-get install -y dos2unix
 
-    - uses: actions/checkout@v2
-      with:
-        fetch-depth: 0
-
-    - uses: trilom/file-changes-action@v1.2.4
-      id: file_changes
-      with:
-        output: ' '
-        fileOutput: ' '
-
-    - name: Run qmk formatters
-      shell: 'bash {0}'
+    - name: Format files
       run: |
-        cat ~/files_added.txt ~/files_modified.txt > ~/files_changed.txt
-        qmk format-c --core-only $(< ~/files_changed.txt) || true
-        qmk format-python $(< ~/files_changed.txt) || true
-        qmk format-text $(< ~/files_changed.txt) || true
+        bin/qmk cformat -a
+        bin/qmk pyformat
+        bin/qmk fileformat
 
-    - name: Fail when formatting required
+    - name: Become QMK Bot
       run: |
-        git diff
-        for file in $(git diff --name-only); do
-          echo "File '${file}' Requires Formatting"
-          echo "::error file=${file}::Requires Formatting"
-        done
-        test -z "$(git diff --name-only)"
+        git config user.name 'QMK Bot'
+        git config user.email 'hello@qmk.fm'
+
+    - name: Create Pull Request
+      uses: peter-evans/create-pull-request@v3
+      with:
+        delete-branch: true
+        author: QMK Bot <hello@qmk.fm>
+        committer: QMK Bot <hello@qmk.fm>
+        commit-message: Format code according to conventions
+        title: '[CI] Format code according to conventions'

.github/workflows/format_push.yaml

@@ -1,49 +0,0 @@
-name: Lint Format
-
-on:
-  push:
-    branches:
-    - master
-    - develop
-
-jobs:
-  lint:
-    runs-on: ubuntu-latest
-
-    container: qmkfm/qmk_cli
-
-    steps:
-    - name: Install dependencies
-      run: |
-        apt-get update && apt-get install -y dos2unix
-
-    - uses: actions/checkout@v2
-      with:
-        fetch-depth: 0
-
-    - name: Run qmk formatters
-      shell: 'bash {0}'
-      run: |
-        qmk format-c -a
-        qmk format-python -a
-        qmk format-text -a
-        git diff
-
-    - uses: rlespinasse/github-slug-action@v3.x
-
-    - name: Become QMK Bot
-      run: |
-        git config user.name 'QMK Bot'
-        git config user.email 'hello@qmk.fm'
-
-    - name: Create Pull Request
-      uses: peter-evans/create-pull-request@v3
-      if: ${{ github.repository == 'qmk/qmk_firmware'}}
-      with:
-        token: ${{ secrets.QMK_BOT_TOKEN }}
-        delete-branch: true
-        branch: bugfix/format_${{ env.GITHUB_REF_SLUG }}
-        author: QMK Bot <hello@qmk.fm>
-        committer: QMK Bot <hello@qmk.fm>
-        commit-message: Format code according to conventions
-        title: '[CI] Format code according to conventions'

.github/workflows/lint.yml

@@ -9,7 +9,7 @@ jobs:
   lint:
     runs-on: ubuntu-latest
 
-    container: qmkfm/qmk_cli
+    container: qmkfm/base_container
 
     steps:
     - uses: actions/checkout@v2

.github/workflows/unit_test.yml

@@ -1,30 +0,0 @@
-name: Unit Tests
-
-on:
-  push:
-    branches:
-    - master
-    - develop
-  pull_request:
-    paths:
-    - 'builddefs/**'
-    - 'quantum/**'
-    - 'platforms/**'
-    - 'tmk_core/**'
-    - 'tests/**'
-    - '*.mk'
-    - 'Makefile'
-    - '.github/workflows/unit_test.yml'
-
-jobs:
-  test:
-    runs-on: ubuntu-latest
-
-    container: qmkfm/base_container
-
-    steps:
-    - uses: actions/checkout@v2
-      with:
-        submodules: recursive
-    - name: Run tests
-      run: make test:all

.gitignore

@@ -1,32 +1,35 @@
-# Junk files
-*.bak
-*.swp
-*~
-.DS_Store
-
-# Build artifacts
-.clang_complete
-.build/
+.history/
+.dep
+*.o
+*.bin
+*.eep
 *.elf
+*.hex
+*.qmk
+!util/bootloader.hex
+!quantum/tools/eeprom_reset.hex
 *.log
 *.lss
 *.lst
 *.map
-*.o
-*.stackdump
 *.sym
-
-# QMK-specific
+*.swp
+tags
+*~
 api_data/v1
-doxygen/
+build/
+.build/
+*.bak
+.vagrant/
 quantum/version.h
-*.bin
-*.eep
-*.hex
-*.qmk
-*.uf2
-
-# Old-style QMK Makefiles
+.idea/
+CMakeLists.txt
+cmake-build-debug
+.clang_complete
+doxygen/
+.DS_Store
+/util/wsl_downloaded
+/util/win_downloaded
 /keyboards/*/Makefile
 /keyboards/*/*/Makefile
 /keyboards/*/*/*/Makefile
@@ -39,55 +42,38 @@ quantum/version.h
 /keyboards/*/*/*/*/*/keymaps/Makefile
 
 # Eclipse/PyCharm/Other IDE Settings
-*.iml
-.browse.VC.db*
 .cproject
-.idea
-.idea/
 .project
 .settings/
-.vagrant/
-
-# ?
-.dep
-.history/
-build/
-cmake-build-debug
-CMakeLists.txt
-
+.idea
+*.iml
+.browse.VC.db*
+*.stackdump
 # Let these ones be user specific, since we have so many different configurations
-*.code-workspace
-.stfolder
-.tags
 .vscode/c_cpp_properties.json
-.vscode/ipch/
-.vscode/last.sql
 .vscode/launch.json
 .vscode/tasks.json
+.vscode/last.sql
 .vscode/temp.sql
-tags
+.vscode/ipch/
+.stfolder
+.tags
 
-# Ignore image files
+# ignore image files
+*.png
 *.gif
 *.jpg
-*.png
 
-# Things Travis sees
-/.vs
-id_rsa_*
+# things travis sees
 secrets.tar
+id_rsa_*
+/.vs
 
-# Python things
+# python things
 __pycache__
-.python-version
 
-# Prerequisites for updating ChibiOS
+# prerequisites for updating ChibiOS
 /util/fmpp*
 
 # Allow to exist but don't include it in the repo
 user_song_list.h
-
-# clangd
-compile_commands.json
-.clangd/
-.cache/

.gitmodules

@@ -6,6 +6,10 @@
 	path = lib/chibios-contrib
 	url = https://github.com/qmk/ChibiOS-Contrib
 	branch = master
+[submodule "lib/ugfx"]
+	path = lib/ugfx
+	url = https://github.com/qmk/uGFX
+	branch = master
 [submodule "lib/googletest"]
 	path = lib/googletest
 	url = https://github.com/qmk/googletest

.travis.yml

@@ -0,0 +1,38 @@
+os: linux
+dist: trusty
+group: edge
+language: c
+branches:
+  except:
+    - /^.*-automated-build$/
+    - /^[0-9]+\.[0-9]+\.[0-9]+/
+env:
+  global:
+  - secure: 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
+  - MAKEFLAGS="-j3 --output-sync"
+services:
+  - docker
+addons:
+  apt:
+    sources:
+      - ubuntu-toolchain-r-test
+      - llvm-toolchain-trusty-7
+    packages:
+    - diffutils
+    - clang-format-7
+    - libstdc++-7-dev
+script:
+  - git fetch --depth=50 origin $TRAVIS_BRANCH:$TRAVIS_BRANCH
+  - git rev-parse --short HEAD
+  - git diff --name-only HEAD $TRAVIS_BRANCH
+  - bash util/travis_test.sh
+  - bash util/travis_build.sh
+after_script:
+  bash util/travis_compiled_push.sh
+notifications:
+  webhooks:
+    urls:
+      - https://webhooks.gitter.im/e/afce403d65f143dfac09
+    on_success: always  # options: [always|never|change] default: always
+    on_failure: always  # options: [always|never|change] default: always
+    on_start: never     # options: [always|never|change] default: always

.vscode/extensions.json

@@ -5,6 +5,7 @@
     "xaver.clang-format",
     "ms-vscode.cpptools",
     "bierner.github-markdown-preview",
-    "donjayamanne.git-extension-pack"
+    "donjayamanne.git-extension-pack",
+    "CoenraadS.bracket-pair-colorizer-2"
   ]
 }

.vscode/settings.json

@@ -22,9 +22,5 @@
     "[markdown]": {
         "editor.trimAutoWhitespace": false,
         "files.trimTrailingWhitespace": false
-    },
-    "python.formatting.provider": "yapf",
-    "[json]": {
-	    "editor.formatOnSave": false
     }
 }

CODE_OF_CONDUCT.md

@@ -0,0 +1,24 @@
+# Code Of Conduct
+
+QMK strives to be an inclusive, tolerant, and welcoming community. We encourage participation from anyone regardless of age, disability, ethnicity, gender identity and expression, level of experience, nationality, personal appearance, political belief, race, religion, or sexual identity and orientation.
+
+> “A gentle word turns away wrath, but a harsh word stirs up anger."
+
+Our users, contributors, and collaborators are expected to treat each other with kindness and respect, to assume good intentions, and to gently correct, where possible, rather than react with escalation. While our goal is to be as accurate as possible, kindness and understanding are more valuable than correctness. Some examples of behavior we will not tolerate include, but is not limited to:
+
+* The use of sexualized language or imagery
+* Unwelcome advances, sexual or otherwise
+* Deliberate intimidation, stalking, or following
+* Insults or derogatory comments, or personal or political attacks
+* Publishing others’ private information without explicit permission
+* Sustained disruption of talks or other events
+* Other conduct which could reasonably be considered inappropriate in a professional setting
+* Advocating for, or encouraging, any of the above behaviour
+
+# Reporting
+
+If someone is violating this Code of Conduct, please email hello@qmk.fm or reach out to one of the Collaborators to bring it to our attention. All complaints will be reviewed and investigated.
+
+QMK will seek to use the least punitive means available to resolve an issue. If the circumstances require asking an offender to leave, we will do that.
+
+Reports will be taken and kept in strict confidence. You will not be required to confront an offender directly.

Dockerfile

@@ -1,6 +1,7 @@
-FROM qmkfm/qmk_cli
+FROM qmkfm/base_container
 
 VOLUME /qmk_firmware
 WORKDIR /qmk_firmware
+COPY . .
 
-CMD qmk compile -kb all -km default
+CMD make all:default

Makefile

@@ -29,9 +29,6 @@ $(info QMK Firmware $(QMK_VERSION))
 endif
 endif
 
-# Determine which qmk cli to use
-QMK_BIN := qmk
-
 # avoid 'Entering|Leaving directory' messages
 MAKEFLAGS += --no-print-directory
 
@@ -54,6 +51,8 @@ BUILD_DIR := $(ROOT_DIR)/.build
 TEST_DIR := $(BUILD_DIR)/test
 ERROR_FILE := $(BUILD_DIR)/error_occurred
 
+MAKEFILE_INCLUDED=yes
+
 # Helper function to process the newt element of a space separated path
 # It works a bit like the traditional functional head tail
 # so the CURRENT_PATH_ELEMENT will become the new head
@@ -87,12 +86,35 @@ clean:
 
 .PHONY: distclean
 distclean: clean
-	echo -n 'Deleting *.bin, *.hex, and *.uf2 ... '
-	rm -f *.bin *.hex *.uf2
+	echo -n 'Deleting *.bin and *.hex ... '
+	rm -f *.bin *.hex
 	echo 'done.'
 
+#Compatibility with the old make variables, anything you specify directly on the command line
+# always overrides the detected folders
+ifdef keyboard
+    KEYBOARD := $(keyboard)
+endif
+ifdef keymap
+    KEYMAP := $(keymap)
+endif
 
+# Uncomment these for debugging
+# $(info Keyboard: $(KEYBOARD))
+# $(info Keymap: $(KEYMAP))
+
+
+# Set the default goal depending on where we are running make from
+# this handles the case where you run make without any arguments
 .DEFAULT_GOAL := all:all
+ifneq ($(KEYMAP),)
+    .DEFAULT_GOAL := $(KEYBOARD):$(KEYMAP)
+else ifneq ($(KEYBOARD),)
+     # Inside a keyboard folder, build all keymaps for all subprojects
+     # Note that this is different from the old behaviour, which would
+     # build only the default keymap of the default keyboard
+    .DEFAULT_GOAL := $(KEYBOARD):all
+endif
 
 
 # Compare the start of the RULE variable with the first argument($1)
@@ -216,23 +238,18 @@ define PARSE_RULE
     else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(shell util/list_keyboards.sh | sort -u)),true)
         KEYBOARD_RULE=$$(MATCHED_ITEM)
         $$(eval $$(call PARSE_KEYBOARD,$$(MATCHED_ITEM)))
+    # Otherwise use the KEYBOARD variable, which is determined either by
+    # the current directory you run make from, or passed in as an argument
+    else ifneq ($$(KEYBOARD),)
+        $$(eval $$(call PARSE_KEYBOARD,$$(KEYBOARD)))
     else
         $$(info make: *** No rule to make target '$1'. Stop.)
         $$(info |)
-        $$(info | QMK's make format is:)
-        $$(info |     make keyboard_folder:keymap_folder[:target])
-        $$(info |)
-        $$(info | Where `keyboard_folder` is the path to the keyboard relative to)
-        $$(info | `qmk_firmware/keyboards/`, and `keymap_folder` is the name of the)
-        $$(info | keymap folder under that board's `keymaps/` directory.)
-        $$(info |)
-        $$(info | Examples:)
-        $$(info |     keyboards/dz60, keyboards/dz60/keymaps/default)
-        $$(info |       -> make dz60:default)
-        $$(info |       -> qmk compile -kb dz60 -km default)
-        $$(info |     keyboards/planck/rev6, keyboards/planck/keymaps/default)
-        $$(info |       -> make planck/rev6:default:flash)
-        $$(info |       -> qmk flash -kb planck/rev6 -km default)
+        $$(info |  QMK's make format recently changed to use folder locations and colons:)
+        $$(info |     make project_folder:keymap[:target])
+        $$(info |  Examples:)
+        $$(info |     make dz60:default)
+        $$(info |     make planck/rev6:default:flash)
         $$(info |)
     endif
 endef
@@ -270,8 +287,37 @@ define PARSE_KEYBOARD
     KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/keymaps/*/.)))
     KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/keymaps/*/.)))
     KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/keymaps/*/.)))
+    # this might be needed, but in a different form
+    #KEYMAPS := $$(sort $$(filter-out $$(KEYBOARD_FOLDER_1) $$(KEYBOARD_FOLDER_2) \
+        $$(KEYBOARD_FOLDER_3) $$(KEYBOARD_FOLDER_4) $$(KEYBOARD_FOLDER_5), $$(KEYMAPS)))
+
+    KEYBOARD_LAYOUTS :=
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/rules.mk)","")
+      LAYOUTS :=
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/rules.mk)
+      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
+    endif
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/rules.mk)","")
+      LAYOUTS :=
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/rules.mk)
+      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
+    endif
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/rules.mk)","")
+      LAYOUTS :=
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/rules.mk)
+      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
+    endif
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/rules.mk)","")
+      LAYOUTS :=
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/rules.mk)
+      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
+    endif
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/rules.mk)","")
+      LAYOUTS :=
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/rules.mk)
+      KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
+    endif
 
-    KEYBOARD_LAYOUTS := $(shell $(QMK_BIN) list-layouts --keyboard $1)
     LAYOUT_KEYMAPS :=
     $$(foreach LAYOUT,$$(KEYBOARD_LAYOUTS),$$(eval LAYOUT_KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/layouts/*/$$(LAYOUT)/*/.)))))
 
@@ -338,7 +384,7 @@ define PARSE_KEYMAP
     # Format it in bold
     KB_SP := $(BOLD)$$(KB_SP)$(NO_COLOR)
     # Specify the variables that we are passing forward to submake
-    MAKE_VARS := KEYBOARD=$$(CURRENT_KB) KEYMAP=$$(CURRENT_KM) REQUIRE_PLATFORM_KEY=$$(REQUIRE_PLATFORM_KEY) QMK_BIN=$$(QMK_BIN)
+    MAKE_VARS := KEYBOARD=$$(CURRENT_KB) KEYMAP=$$(CURRENT_KM) REQUIRE_PLATFORM_KEY=$$(REQUIRE_PLATFORM_KEY)
     # And the first part of the make command
     MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f build_keyboard.mk $$(MAKE_TARGET)
     # The message to display
@@ -378,12 +424,11 @@ define PARSE_ALL_KEYMAPS
 endef
 
 define BUILD_TEST
-    TEST_PATH := $1
-    TEST_NAME := $$(notdir $$(TEST_PATH))
+    TEST_NAME := $1
     MAKE_TARGET := $2
     COMMAND := $1
     MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f build_test.mk $$(MAKE_TARGET)
-    MAKE_VARS := TEST=$$(TEST_NAME) TEST_PATH=$$(TEST_PATH) FULL_TESTS="$$(FULL_TESTS)"
+    MAKE_VARS := TEST=$$(TEST_NAME) FULL_TESTS="$$(FULL_TESTS)"
     MAKE_MSG := $$(MSG_MAKE_TEST)
     $$(eval $$(call BUILD))
     ifneq ($$(MAKE_TARGET),clean)
@@ -407,7 +452,7 @@ define PARSE_TEST
     ifeq ($$(TEST_NAME),all)
         MATCHED_TESTS := $$(TEST_LIST)
     else
-        MATCHED_TESTS := $$(foreach TEST, $$(TEST_LIST),$$(if $$(findstring $$(TEST_NAME), $$(notdir $$(TEST))), $$(TEST),))
+        MATCHED_TESTS := $$(foreach TEST,$$(TEST_LIST),$$(if $$(findstring $$(TEST_NAME),$$(TEST)),$$(TEST),))
     endif
     $$(foreach TEST,$$(MATCHED_TESTS),$$(eval $$(call BUILD_TEST,$$(TEST),$$(TEST_TARGET))))
 endef
@@ -426,8 +471,7 @@ define SET_SILENT_MODE
     endif
 endef
 
-include paths.mk
-include $(BUILDDEFS_PATH)/message.mk
+include $(ROOT_DIR)/message.mk
 
 ifeq ($(strip $(BREAK_ON_ERRORS)), yes)
 HANDLE_ERROR = exit 1
@@ -457,12 +501,13 @@ endef
 %:
 	# Check if we have the CMP tool installed
 	cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
-	# Ensure that $(QMK_BIN) works.
-	if ! $(QMK_BIN) hello 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; exit 1; fi
+	# Ensure that bin/qmk works. This will be a failing check after the next develop merge
+	if ! bin/qmk hello 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi
 	# Check if the submodules are dirty, and display a warning if they are
 ifndef SKIP_GIT
 	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 50 --init lib/chibios; fi
 	if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --depth 50 --init lib/chibios-contrib; fi
+	if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --depth 50 --init lib/ugfx; fi
 	if [ ! -e lib/lufa ]; then git submodule sync lib/lufa && git submodule update --depth 50 --init lib/lufa; fi
 	if [ ! -e lib/vusb ]; then git submodule sync lib/vusb && git submodule update --depth 50 --init lib/vusb; fi
 	if [ ! -e lib/printf ]; then git submodule sync lib/printf && git submodule update --depth 50 --init lib/printf; fi
@@ -496,14 +541,29 @@ git-submodule:
 	git submodule sync --recursive
 	git submodule update --init --recursive --progress
 
-# Generate the version.h file
-ifdef SKIP_GIT
-VERSION_H_FLAGS := --skip-git
-endif
 ifdef SKIP_VERSION
-VERSION_H_FLAGS := --skip-all
 SKIP_GIT := yes
 endif
-$(shell $(QMK_BIN) generate-version-h $(VERSION_H_FLAGS) -q -o quantum/version.h)
+
+# Generate the version.h file
+ifndef SKIP_GIT
+    GIT_VERSION := $(shell git describe --abbrev=6 --dirty --always --tags 2>/dev/null || date +"%Y-%m-%d-%H:%M:%S")
+    CHIBIOS_VERSION := $(shell cd lib/chibios && git describe --abbrev=6 --dirty --always --tags 2>/dev/null || date +"%Y-%m-%d-%H:%M:%S")
+    CHIBIOS_CONTRIB_VERSION := $(shell cd lib/chibios-contrib && git describe --abbrev=6 --dirty --always --tags 2>/dev/null || date +"%Y-%m-%d-%H:%M:%S")
+else
+    GIT_VERSION := NA
+    CHIBIOS_VERSION := NA
+    CHIBIOS_CONTRIB_VERSION := NA
+endif
+ifndef SKIP_VERSION
+BUILD_DATE := $(shell date +"%Y-%m-%d-%H:%M:%S")
+else
+BUILD_DATE := 2020-01-01-00:00:00
+endif
+
+$(shell echo '#define QMK_VERSION "$(GIT_VERSION)"' > $(ROOT_DIR)/quantum/version.h)
+$(shell echo '#define QMK_BUILDDATE "$(BUILD_DATE)"' >> $(ROOT_DIR)/quantum/version.h)
+$(shell echo '#define CHIBIOS_VERSION "$(CHIBIOS_VERSION)"' >> $(ROOT_DIR)/quantum/version.h)
+$(shell echo '#define CHIBIOS_CONTRIB_VERSION "$(CHIBIOS_CONTRIB_VERSION)"' >> $(ROOT_DIR)/quantum/version.h)
 
 include $(ROOT_DIR)/testlist.mk

Vagrantfile

@@ -6,7 +6,7 @@ Vagrant.configure(2) do |config|
   config.vm.define "qmk_firmware"
 
   # VMware/Virtualbox ( and also Hyperv/Parallels) 64 bit
-  config.vm.box = "generic/debian10"
+  config.vm.box = "generic/debian9"
   
   config.vm.synced_folder '.', '/vagrant'
 
@@ -68,13 +68,13 @@ Vagrant.configure(2) do |config|
   ["virtualbox", "vmware_workstation", "vmware_fusion"].each do |type|
     config.vm.provider type do |virt, override|
       override.vm.provision "docker" do |d|
-        d.run "qmkfm/qmk_cli",
+        d.run "qmkfm/base_container",
           cmd: "tail -f /dev/null",
           args: "--privileged -v /dev:/dev -v '/vagrant:/vagrant'"
       end
 
       override.vm.provision "shell", inline: <<-SHELL
-        echo 'docker restart qmkfm-qmk_cli && exec docker exec -it qmkfm-qmk_cli /bin/bash -l' >> ~vagrant/.bashrc
+        echo 'docker restart qmkfm-base_container && exec docker exec -it qmkfm-base_container /bin/bash -l' >> ~vagrant/.bashrc
       SHELL
     end
   end

bin/qmk

@@ -0,0 +1,97 @@
+#!/usr/bin/env python3
+"""CLI wrapper for running QMK commands.
+"""
+import os
+import sys
+from importlib.util import find_spec
+from pathlib import Path
+
+# Add the QMK python libs to our path
+script_dir = Path(os.path.realpath(__file__)).parent
+qmk_dir = script_dir.parent
+python_lib_dir = Path(qmk_dir / 'lib' / 'python').resolve()
+sys.path.append(str(python_lib_dir))
+
+
+def _check_modules(requirements):
+    """ Check if the modules in the given requirements.txt are available.
+    """
+    with Path(qmk_dir / requirements).open() as fd:
+        for line in fd.readlines():
+            line = line.strip().replace('<', '=').replace('>', '=')
+
+            if len(line) == 0 or line[0] == '#' or line.startswith('-r'):
+                continue
+
+            if '#' in line:
+                line = line.split('#')[0]
+
+            module = dict()
+            module['name'] = module['import'] = line.split('=')[0] if '=' in line else line
+
+            # Not every module is importable by its own name.
+            if module['name'] == "pep8-naming":
+                module['import'] = "pep8ext_naming"
+
+            if not find_spec(module['import']):
+                print('Could not find module %s!' % module['name'])
+                print('Please run `python3 -m pip install -r %s` to install required python dependencies.' % (qmk_dir / requirements,))
+                if developer:
+                    print('You can also turn off developer mode: qmk config user.developer=None')
+                print()
+                exit(255)
+
+
+developer = False
+# Make sure our modules have been setup
+_check_modules('requirements.txt')
+
+# Setup the CLI
+import milc  # noqa
+
+# For developers additional modules are needed
+if milc.cli.config.user.developer:
+    # Do not run the check for 'config',
+    # so users can turn off developer mode
+    if len(sys.argv) == 1 or (len(sys.argv) > 1 and 'config' != sys.argv[1]):
+        developer = True
+        _check_modules('requirements-dev.txt')
+
+milc.EMOJI_LOGLEVELS['INFO'] = '{fg_blue}Ψ{style_reset_all}'
+
+
+@milc.cli.entrypoint('QMK Helper Script')
+def qmk_main(cli):
+    """The function that gets run when no subcommand is provided.
+    """
+    cli.print_help()
+
+
+def main():
+    """Setup our environment and then call the CLI entrypoint.
+    """
+    # Change to the root of our checkout
+    os.environ['ORIG_CWD'] = os.getcwd()
+    os.chdir(qmk_dir)
+
+    # Import the subcommands
+    import qmk.cli  # noqa
+
+    # Execute
+    return_code = milc.cli()
+
+    if return_code is False:
+        exit(1)
+
+    elif return_code is not True and isinstance(return_code, int):
+        if return_code < 0 or return_code > 255:
+            milc.cli.log.error('Invalid return_code: %d', return_code)
+            exit(255)
+
+        exit(return_code)
+
+    exit(0)
+
+
+if __name__ == '__main__':
+    main()

bootloader.mk

@@ -0,0 +1,139 @@
+# Copyright 2017 Jack Humbert
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# If it's possible that multiple bootloaders can be used for one project,
+# you can leave this unset, and the correct size will be selected
+# automatically.
+#
+# Sets the bootloader defined in the keyboard's/keymap's rules.mk
+# Current options:
+#
+# AVR:
+#     halfkay     PJRC Teensy
+#     caterina    Pro Micro (Sparkfun/generic)
+#     atmel-dfu   Atmel factory DFU
+#     lufa-dfu    LUFA DFU
+#     qmk-dfu     QMK DFU (LUFA + blinkenlight)
+#     bootloadHID HIDBootFlash compatible (ATmega32A)
+#     USBasp      USBaspLoader (ATmega328P)
+# ARM:
+#     kiibohd     Input:Club Kiibohd bootloader (only used on their boards)
+#     stm32duino  STM32Duino (STM32F103x8)
+#     stm32-dfu   STM32 USB DFU in ROM
+#     apm32-dfu   APM32 USB DFU in ROM
+#
+# BOOTLOADER_SIZE can still be defined manually, but it's recommended
+# you add any possible configuration to this list
+
+ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
+    OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
+    OPT_DEFS += -DBOOTLOADER_DFU
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
+        BOOTLOADER_SIZE = 4096
+    endif
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
+        BOOTLOADER_SIZE = 8192
+    endif
+endif
+ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
+    OPT_DEFS += -DBOOTLOADER_LUFA_DFU
+    OPT_DEFS += -DBOOTLOADER_DFU
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
+        BOOTLOADER_SIZE = 4096
+    endif
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
+        BOOTLOADER_SIZE = 8192
+    endif
+endif
+ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
+    OPT_DEFS += -DBOOTLOADER_QMK_DFU
+    OPT_DEFS += -DBOOTLOADER_DFU
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
+        BOOTLOADER_SIZE = 4096
+    endif
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
+        BOOTLOADER_SIZE = 8192
+    endif
+endif
+ifeq ($(strip $(BOOTLOADER)), halfkay)
+    OPT_DEFS += -DBOOTLOADER_HALFKAY
+    ifeq ($(strip $(MCU)), atmega32u4)
+        BOOTLOADER_SIZE = 512
+    endif
+    ifeq ($(strip $(MCU)), at90usb1286)
+        BOOTLOADER_SIZE = 1024
+    endif
+endif
+ifeq ($(strip $(BOOTLOADER)), caterina)
+    OPT_DEFS += -DBOOTLOADER_CATERINA
+    BOOTLOADER_SIZE = 4096
+endif
+ifeq ($(strip $(BOOTLOADER)), bootloadHID)
+    OPT_DEFS += -DBOOTLOADER_BOOTLOADHID
+    BOOTLOADER_SIZE = 4096
+endif
+ifeq ($(strip $(BOOTLOADER)), USBasp)
+    OPT_DEFS += -DBOOTLOADER_USBASP
+    BOOTLOADER_SIZE = 4096
+endif
+ifeq ($(strip $(BOOTLOADER)), lufa-ms)
+    # DO NOT USE THIS BOOTLOADER IN NEW PROJECTS!
+    # It is extremely prone to bricking, and is only included to support existing boards.
+    OPT_DEFS += -DBOOTLOADER_MS
+    BOOTLOADER_SIZE = 6144
+    FIRMWARE_FORMAT = bin
+endif
+ifdef BOOTLOADER_SIZE
+    OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))
+endif
+
+ifeq ($(strip $(BOOTLOADER)), stm32-dfu)
+    OPT_DEFS += -DBOOTLOADER_STM32_DFU
+
+    # Options to pass to dfu-util when flashing
+    DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
+    DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
+endif
+ifeq ($(strip $(BOOTLOADER)), apm32-dfu)
+    OPT_DEFS += -DBOOTLOADER_APM32_DFU
+
+    # Options to pass to dfu-util when flashing
+    DFU_ARGS ?= -d 314B:0106 -a 0 -s 0x08000000:leave
+    DFU_SUFFIX_ARGS ?= -v 314B -p 0106
+endif
+ifeq ($(strip $(BOOTLOADER)), kiibohd)
+    OPT_DEFS += -DBOOTLOADER_KIIBOHD
+    ifeq ($(strip $(MCU_ORIG)), MK20DX128)
+        MCU_LDSCRIPT = MK20DX128BLDR4
+    endif
+    ifeq ($(strip $(MCU_ORIG)), MK20DX256)
+        MCU_LDSCRIPT = MK20DX256BLDR8
+    endif
+
+    # Options to pass to dfu-util when flashing
+    DFU_ARGS = -d 1C11:B007
+    DFU_SUFFIX_ARGS = -v 1C11 -p B007
+endif
+ifeq ($(strip $(BOOTLOADER)), stm32duino)
+    OPT_DEFS += -DBOOTLOADER_STM32DUINO
+    MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
+    BOARD = STM32_F103_STM32DUINO
+    # STM32F103 does NOT have an USB bootloader in ROM (only serial), so setting anything here does not make much sense
+    STM32_BOOTLOADER_ADDRESS = 0x80000000
+
+    # Options to pass to dfu-util when flashing
+    DFU_ARGS = -d 1EAF:0003 -a 2 -R
+    DFU_SUFFIX_ARGS = -v 1EAF -p 0003
+endif

build_full_test.mk

@@ -13,24 +13,21 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-$(TEST)_INC := \
-	tests\test_common\common_config.h
+#include $(TMK_PATH)/protocol.mk
 
-$(TEST)_SRC := \
+TEST_PATH=tests/$(TEST)
+
+$(TEST)_SRC= \
+	$(TEST_PATH)/keymap.c \
 	$(TMK_COMMON_SRC) \
 	$(QUANTUM_SRC) \
 	$(SRC) \
-	tests/test_common/keymap.c \
 	tests/test_common/matrix.c \
 	tests/test_common/test_driver.cpp \
 	tests/test_common/keyboard_report_util.cpp \
-	tests/test_common/test_fixture.cpp \
-	tests/test_common/test_keymap_key.cpp \
-	tests/test_common/test_logger.cpp \
-	$(patsubst $(ROOTDIR)/%,%,$(wildcard $(TEST_PATH)/*.cpp))
+	tests/test_common/test_fixture.cpp
+$(TEST)_SRC += $(patsubst $(ROOTDIR)/%,%,$(wildcard $(TEST_PATH)/*.cpp))
 
-$(TEST)_DEFS := $(TMK_COMMON_DEFS) $(OPT_DEFS)
-
-$(TEST)_CONFIG := $(TEST_PATH)/config.h
-
-VPATH += $(TOP_DIR)/tests/test_common
+$(TEST)_DEFS=$(TMK_COMMON_DEFS) $(OPT_DEFS)
+$(TEST)_CONFIG=$(TEST_PATH)/config.h
+VPATH+=$(TOP_DIR)/tests/test_common

build_json.mk

@@ -1,17 +1,31 @@
 # Look for a json keymap file
 ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.json)","")
+    KEYMAP_C := $(KEYBOARD_OUTPUT)/src/keymap.c
     KEYMAP_JSON := $(MAIN_KEYMAP_PATH_5)/keymap.json
     KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
 else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.json)","")
+    KEYMAP_C := $(KEYBOARD_OUTPUT)/src/keymap.c
     KEYMAP_JSON := $(MAIN_KEYMAP_PATH_4)/keymap.json
     KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
 else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.json)","")
+    KEYMAP_C := $(KEYBOARD_OUTPUT)/src/keymap.c
     KEYMAP_JSON := $(MAIN_KEYMAP_PATH_3)/keymap.json
     KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
 else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.json)","")
+    KEYMAP_C := $(KEYBOARD_OUTPUT)/src/keymap.c
     KEYMAP_JSON := $(MAIN_KEYMAP_PATH_2)/keymap.json
     KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
 else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.json)","")
+    KEYMAP_C := $(KEYBOARD_OUTPUT)/src/keymap.c
     KEYMAP_JSON := $(MAIN_KEYMAP_PATH_1)/keymap.json
     KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
 endif
+
+# Load the keymap-level rules.mk if exists
+ifneq ("$(wildcard $(KEYMAP_PATH))", "")
+    -include $(KEYMAP_PATH)/rules.mk
+endif
+
+# Generate the keymap.c
+$(KEYBOARD_OUTPUT)/src/keymap.c: $(KEYMAP_JSON)
+	bin/qmk json2c --quiet --output $(KEYMAP_C) $(KEYMAP_JSON)

build_keyboard.mk

@@ -10,11 +10,7 @@ endif
 
 .DEFAULT_GOAL := all
 
-include paths.mk
-include $(BUILDDEFS_PATH)/message.mk
-
-# Set the qmk cli to use
-QMK_BIN ?= qmk
+include common.mk
 
 # Set the filename for the final firmware binary
 KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
@@ -24,14 +20,19 @@ KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
 # Force expansion
 TARGET := $(TARGET)
 
-ifneq ($(FORCE_LAYOUT),)
-    TARGET := $(TARGET)_$(FORCE_LAYOUT)
+# For split boards we need to set a master half.
+MASTER ?= left
+ifdef master
+    MASTER = $(master)
 endif
 
-# Object files and generated keymap directory
-#     To put object files in current directory, use a dot (.), do NOT make
-#     this an empty or blank macro!
-KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET)
+ifeq ($(MASTER),right)
+    OPT_DEFS += -DMASTER_IS_ON_RIGHT
+else
+    ifneq ($(MASTER),left)
+$(error MASTER does not have a valid value(left/right))
+    endif
+endif
 
 ifdef SKIP_VERSION
     OPT_DEFS += -DSKIP_VERSION
@@ -89,20 +90,16 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
     include $(KEYBOARD_PATH_1)/rules.mk
 endif
 
+
 MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
 MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
 MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
 MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
 MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
 
-# Pull in rules from info.json
-INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/info_rules.mk)
-include $(INFO_RULES_MK)
-
 # Check for keymap.json first, so we can regenerate keymap.c
 include build_json.mk
 
-# Pull in keymap level rules.mk
 ifeq ("$(wildcard $(KEYMAP_PATH))", "")
     # Look through the possible keymap folders until we find a matching keymap.c
     ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
@@ -134,38 +131,21 @@ ifeq ("$(wildcard $(KEYMAP_PATH))", "")
     endif
 endif
 
-# Have we found a keymap.json?
-ifneq ("$(wildcard $(KEYMAP_JSON))", "")
-    KEYMAP_C := $(KEYMAP_OUTPUT)/src/keymap.c
-    KEYMAP_H := $(KEYMAP_OUTPUT)/src/config.h
-
-    # Load the keymap-level rules.mk if exists
-    -include $(KEYMAP_PATH)/rules.mk
-
-    # Load any rules.mk content from keymap.json
-    INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --keyboard $(KEYBOARD) --keymap $(KEYMAP) --output $(KEYMAP_OUTPUT)/src/rules.mk)
-    include $(INFO_RULES_MK)
-
-# Add rules to generate the keymap files - indentation here is important
-$(KEYMAP_OUTPUT)/src/keymap.c: $(KEYMAP_JSON)
-	$(QMK_BIN) json2c --quiet --output $(KEYMAP_C) $(KEYMAP_JSON)
-
-$(KEYMAP_OUTPUT)/src/config.h: $(KEYMAP_JSON)
-	$(QMK_BIN) generate-config-h --quiet --keyboard $(KEYBOARD) --keymap $(KEYMAP) --output $(KEYMAP_H)
-
-generated-files: $(KEYMAP_OUTPUT)/src/config.h $(KEYMAP_OUTPUT)/src/keymap.c
-
-endif
-
 ifeq ($(strip $(CTPC)), yes)
   CONVERT_TO_PROTON_C=yes
 endif
 
 ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
-    include platforms/chibios/boards/QMK_PROTON_C/convert_to_proton_c.mk
+    TARGET := $(TARGET)_proton_c
+    include platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk
+    OPT_DEFS += -DCONVERT_TO_PROTON_C
 endif
 
-include $(BUILDDEFS_PATH)/mcu_selection.mk
+ifneq ($(FORCE_LAYOUT),)
+    TARGET := $(TARGET)_$(FORCE_LAYOUT)
+endif
+
+include quantum/mcu_selection.mk
 
 # Find all the C source files to be compiled in subfolders.
 KEYBOARD_SRC :=
@@ -224,7 +204,6 @@ endif
 #
 #    https://docs.qmk.fm/#/feature_layouts?id=tips-for-making-layouts-keyboard-agnostic
 #
-QMK_KEYBOARD_H = $(KEYBOARD_OUTPUT)/src/default_keyboard.h
 ifneq ("$(wildcard $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).h)","")
     QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_1).h
 endif
@@ -248,7 +227,6 @@ ifdef MCU_FAMILY
     PLATFORM=CHIBIOS
     PLATFORM_KEY=chibios
     FIRMWARE_FORMAT?=bin
-    OPT_DEFS += -DMCU_$(MCU_FAMILY)
 else ifdef ARM_ATSAM
     PLATFORM=ARM_ATSAM
     PLATFORM_KEY=arm_atsam
@@ -294,87 +272,33 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_config.h)","")
     POST_CONFIG_H += $(KEYBOARD_PATH_5)/post_config.h
 endif
 
-# Pull in stuff from info.json
-INFO_JSON_FILES :=
-ifneq ("$(wildcard $(KEYBOARD_PATH_1)/info.json)","")
-    INFO_JSON_FILES += $(KEYBOARD_PATH_1)/info.json
-endif
-ifneq ("$(wildcard $(KEYBOARD_PATH_2)/info.json)","")
-    INFO_JSON_FILES += $(KEYBOARD_PATH_2)/info.json
-endif
-ifneq ("$(wildcard $(KEYBOARD_PATH_3)/info.json)","")
-    INFO_JSON_FILES += $(KEYBOARD_PATH_3)/info.json
-endif
-ifneq ("$(wildcard $(KEYBOARD_PATH_4)/info.json)","")
-    INFO_JSON_FILES += $(KEYBOARD_PATH_4)/info.json
-endif
-ifneq ("$(wildcard $(KEYBOARD_PATH_5)/info.json)","")
-    INFO_JSON_FILES += $(KEYBOARD_PATH_5)/info.json
-endif
-
-CONFIG_H += $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h
-
-$(KEYBOARD_OUTPUT)/src/info_config.h: $(INFO_JSON_FILES)
-	$(QMK_BIN) generate-config-h --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/info_config.h
-
-$(KEYBOARD_OUTPUT)/src/default_keyboard.h: $(INFO_JSON_FILES)
-	$(QMK_BIN) generate-keyboard-h --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/default_keyboard.h
-
-$(KEYBOARD_OUTPUT)/src/layouts.h: $(INFO_JSON_FILES)
-	$(QMK_BIN) generate-layouts --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/layouts.h
-
-generated-files: $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/default_keyboard.h $(KEYBOARD_OUTPUT)/src/layouts.h
-
-.INTERMEDIATE : generated-files
-
 # Userspace setup and definitions
 ifeq ("$(USER_NAME)","")
     USER_NAME := $(KEYMAP)
 endif
 USER_PATH := users/$(USER_NAME)
 
-# Pull in user level rules.mk
 -include $(USER_PATH)/rules.mk
 ifneq ("$(wildcard $(USER_PATH)/config.h)","")
     CONFIG_H += $(USER_PATH)/config.h
 endif
-ifneq ("$(wildcard $(USER_PATH)/post_config.h)","")
-    POST_CONFIG_H += $(USER_PATH)/post_config.h
-endif
 
 # Disable features that a keyboard doesn't support
--include $(BUILDDEFS_PATH)/disable_features.mk
+-include disable_features.mk
 
-# Pull in post_rules.mk files from all our subfolders
-ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_rules.mk)","")
-    include $(KEYBOARD_PATH_1)/post_rules.mk
-endif
-ifneq ("$(wildcard $(KEYBOARD_PATH_2)/post_rules.mk)","")
-    include $(KEYBOARD_PATH_2)/post_rules.mk
-endif
-ifneq ("$(wildcard $(KEYBOARD_PATH_3)/post_rules.mk)","")
-    include $(KEYBOARD_PATH_3)/post_rules.mk
-endif
-ifneq ("$(wildcard $(KEYBOARD_PATH_4)/post_rules.mk)","")
-    include $(KEYBOARD_PATH_4)/post_rules.mk
-endif
-ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_rules.mk)","")
-    include $(KEYBOARD_PATH_5)/post_rules.mk
-endif
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET)
 
 ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","")
     CONFIG_H += $(KEYMAP_PATH)/config.h
 endif
-ifneq ("$(KEYMAP_H)","")
-    CONFIG_H += $(KEYMAP_H)
-endif
 
 # project specific files
-SRC += \
-    $(KEYBOARD_SRC) \
+SRC += $(KEYBOARD_SRC) \
     $(KEYMAP_C) \
-    $(QUANTUM_SRC) \
-    $(QUANTUM_DIR)/main.c \
+    $(QUANTUM_SRC)
 
 # Optimize size but this may cause error "relocation truncated to fit"
 #EXTRALDFLAGS = -Wl,--relax
@@ -386,10 +310,9 @@ VPATH += $(KEYBOARD_PATHS)
 VPATH += $(COMMON_VPATH)
 
 include common_features.mk
-include $(BUILDDEFS_PATH)/generic_features.mk
 include $(TMK_PATH)/protocol.mk
-include $(PLATFORM_PATH)/common.mk
-include $(BUILDDEFS_PATH)/bootloader.mk
+include $(TMK_PATH)/common.mk
+include bootloader.mk
 
 SRC += $(patsubst %.c,%.clib,$(LIB_SRC))
 SRC += $(patsubst %.c,%.clib,$(QUANTUM_LIB_SRC))
@@ -404,9 +327,7 @@ ifneq ($(REQUIRE_PLATFORM_KEY),)
     endif
 endif
 
-include $(PLATFORM_PATH)/$(PLATFORM_KEY)/platform.mk
--include $(PLATFORM_PATH)/$(PLATFORM_KEY)/flash.mk
-
+include $(TMK_PATH)/$(PLATFORM_KEY).mk
 ifneq ($(strip $(PROTOCOL)),)
     include $(TMK_PATH)/protocol/$(strip $(shell echo $(PROTOCOL) | tr '[:upper:]' '[:lower:]')).mk
 else
@@ -418,20 +339,26 @@ PROJECT_DEFS := $(OPT_DEFS)
 PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
 PROJECT_CONFIG := $(CONFIG_H)
 
+ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
+    VISUALIZER_DIR = $(QUANTUM_DIR)/visualizer
+    VISUALIZER_PATH = $(QUANTUM_PATH)/visualizer
+    include $(VISUALIZER_PATH)/visualizer.mk
+endif
+
 CONFIG_H += $(POST_CONFIG_H)
 ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H)
 
 OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT)
 $(KEYMAP_OUTPUT)_SRC := $(SRC)
-$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) \
--DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(QMK_KEYBOARD_H)\" \
+$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) $(GFXDEFS) \
+-DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(QMK_KEYBOARD_H)\" -DQMK_KEYBOARD_CONFIG_H=\"$(KEYBOARD_PATH_1)/config.h\" \
 -DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \
 -DQMK_SUBPROJECT -DQMK_SUBPROJECT_H -DQMK_SUBPROJECT_CONFIG_H
 $(KEYMAP_OUTPUT)_INC :=  $(VPATH) $(EXTRAINCDIRS)
 $(KEYMAP_OUTPUT)_CONFIG := $(CONFIG_H)
-$(KEYBOARD_OUTPUT)_SRC := $(PLATFORM_SRC)
-$(KEYBOARD_OUTPUT)_DEFS := $(PROJECT_DEFS)
-$(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC)
+$(KEYBOARD_OUTPUT)_SRC := $(CHIBISRC) $(GFXSRC)
+$(KEYBOARD_OUTPUT)_DEFS := $(PROJECT_DEFS) $(GFXDEFS)
+$(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(GFXINC)
 $(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
 
 # Default target.
@@ -447,11 +374,5 @@ check-size: build
 check-md5: build
 objs-size: build
 
-include $(BUILDDEFS_PATH)/show_options.mk
+include show_options.mk
 include $(TMK_PATH)/rules.mk
-
-# Ensure we have generated files available for each of the objects
-define GEN_FILES
-$1: generated-files
-endef
-$(foreach O,$(OBJ),$(eval $(call GEN_FILES,$(patsubst %.a,%.o,$(O)))))

build_layout.mk

@@ -7,6 +7,7 @@ define SEARCH_LAYOUTS_REPO
     LAYOUT_KEYMAP_C := $$(LAYOUT_KEYMAP_PATH)/keymap.c
     ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_JSON))","")
         -include $$(LAYOUT_KEYMAP_PATH)/rules.mk
+        KEYMAP_C := $(KEYBOARD_OUTPUT)/src/keymap.c
         KEYMAP_JSON := $$(LAYOUT_KEYMAP_JSON)
         KEYMAP_PATH := $$(LAYOUT_KEYMAP_PATH)
     else ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_C))","")
@@ -30,3 +31,6 @@ ifneq ($(FORCE_LAYOUT),)
 endif
 
 $(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))
+
+# Use rule from build_json.mk, but update prerequisite in case KEYMAP_JSON was updated
+$(KEYBOARD_OUTPUT)/src/keymap.c: $(KEYMAP_JSON)

build_test.mk

@@ -4,8 +4,7 @@ endif
 
 .DEFAULT_GOAL := all
 
-include paths.mk
-include $(BUILDDEFS_PATH)/message.mk
+include common.mk
 
 TARGET=test/$(TEST)
 
@@ -16,15 +15,16 @@ TEST_OBJ = $(BUILD_DIR)/test_obj
 OUTPUTS := $(TEST_OBJ)/$(TEST) $(GTEST_OUTPUT)
 
 GTEST_INC := \
-	$(LIB_PATH)/googletest/googletest/include \
-	$(LIB_PATH)/googletest/googlemock/include
+	$(LIB_PATH)/googletest/googletest/include\
+	$(LIB_PATH)/googletest/googlemock/include\
 
-GTEST_INTERNAL_INC := \
-	$(LIB_PATH)/googletest/googletest \
+GTEST_INTERNAL_INC :=\
+	$(LIB_PATH)/googletest/googletest\
 	$(LIB_PATH)/googletest/googlemock
 
-$(GTEST_OUTPUT)_SRC := \
+$(GTEST_OUTPUT)_SRC :=\
 	googletest/src/gtest-all.cc\
+	googletest/src/gtest_main.cc\
 	googlemock/src/gmock-all.cc
 
 $(GTEST_OUTPUT)_DEFS :=
@@ -33,10 +33,9 @@ $(GTEST_OUTPUT)_INC := $(GTEST_INC) $(GTEST_INTERNAL_INC)
 LDFLAGS += -lstdc++ -lpthread -shared-libgcc
 CREATE_MAP := no
 
-VPATH += \
-	$(LIB_PATH)/googletest \
-	$(LIB_PATH)/googlemock \
-	$(LIB_PATH)/printf
+VPATH +=\
+	$(LIB_PATH)/googletest\
+	$(LIB_PATH)/googlemock
 
 all: elf
 
@@ -44,38 +43,24 @@ VPATH += $(COMMON_VPATH)
 PLATFORM:=TEST
 PLATFORM_KEY:=test
 
-ifeq ($(strip $(DEBUG)), 1)
-CONSOLE_ENABLE = yes
-endif
-
 ifneq ($(filter $(FULL_TESTS),$(TEST)),)
-include tests/test_common/build.mk
-include $(TEST_PATH)/test.mk
+include tests/$(TEST)/rules.mk
 endif
 
 include common_features.mk
-include $(BUILDDEFS_PATH)/generic_features.mk
-include $(PLATFORM_PATH)/common.mk
-include $(TMK_PATH)/protocol.mk
-include $(QUANTUM_PATH)/debounce/tests/rules.mk
-include $(QUANTUM_PATH)/encoder/tests/rules.mk
+include $(TMK_PATH)/common.mk
 include $(QUANTUM_PATH)/sequencer/tests/rules.mk
-include $(PLATFORM_PATH)/test/rules.mk
+include $(QUANTUM_PATH)/serial_link/tests/rules.mk
 ifneq ($(filter $(FULL_TESTS),$(TEST)),)
 include build_full_test.mk
 endif
 
-$(TEST)_SRC += \
-	tests/test_common/main.c \
-	$(LIB_PATH)/printf/printf.c \
-	$(QUANTUM_PATH)/logging/print.c
-
 $(TEST_OBJ)/$(TEST)_SRC := $($(TEST)_SRC)
 $(TEST_OBJ)/$(TEST)_INC := $($(TEST)_INC) $(VPATH) $(GTEST_INC)
 $(TEST_OBJ)/$(TEST)_DEFS := $($(TEST)_DEFS)
 $(TEST_OBJ)/$(TEST)_CONFIG := $($(TEST)_CONFIG)
 
-include $(PLATFORM_PATH)/$(PLATFORM_KEY)/platform.mk
+include $(TMK_PATH)/native.mk
 include $(TMK_PATH)/rules.mk
 
 

builddefs/bootloader.mk

@@ -1,163 +0,0 @@
-# Copyright 2017 Jack Humbert
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# If it's possible that multiple bootloaders can be used for one project,
-# you can leave this unset, and the correct size will be selected
-# automatically.
-#
-# Sets the bootloader defined in the keyboard's/keymap's rules.mk
-# Current options:
-#
-# AVR:
-#     halfkay      PJRC Teensy
-#     caterina     Pro Micro (Sparkfun/generic)
-#     atmel-dfu    Atmel factory DFU
-#     lufa-dfu     LUFA DFU
-#     qmk-dfu      QMK DFU (LUFA + blinkenlight)
-#     qmk-hid      QMK HID (LUFA + blinkenlight)
-#     bootloadhid  HIDBootFlash compatible (ATmega32A)
-#     usbasploader USBaspLoader (ATmega328P)
-# ARM:
-#     kiibohd      Input:Club Kiibohd bootloader (only used on their boards)
-#     stm32duino   STM32Duino (STM32F103x8)
-#     stm32-dfu    STM32 USB DFU in ROM
-#     apm32-dfu    APM32 USB DFU in ROM
-# RISC-V:
-#     gd32v-dfu    GD32V USB DFU in ROM
-#
-# BOOTLOADER_SIZE can still be defined manually, but it's recommended
-# you add any possible configuration to this list
-
-ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
-    OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
-    OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
-        BOOTLOADER_SIZE = 4096
-    endif
-    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
-        BOOTLOADER_SIZE = 8192
-    endif
-endif
-ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
-    OPT_DEFS += -DBOOTLOADER_LUFA_DFU
-    OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
-        BOOTLOADER_SIZE ?= 4096
-    endif
-    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
-        BOOTLOADER_SIZE ?= 8192
-    endif
-endif
-ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
-    OPT_DEFS += -DBOOTLOADER_QMK_DFU
-    OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
-        BOOTLOADER_SIZE ?= 4096
-    endif
-    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
-        BOOTLOADER_SIZE ?= 8192
-    endif
-endif
-ifeq ($(strip $(BOOTLOADER)), qmk-hid)
-    OPT_DEFS += -DBOOTLOADER_QMK_HID
-    OPT_DEFS += -DBOOTLOADER_HID
-    BOOTLOADER_SIZE ?= 4096
-endif
-ifeq ($(strip $(BOOTLOADER)), halfkay)
-    OPT_DEFS += -DBOOTLOADER_HALFKAY
-    ifeq ($(strip $(MCU)), atmega32u4)
-        BOOTLOADER_SIZE = 512
-    endif
-    ifeq ($(strip $(MCU)), at90usb1286)
-        BOOTLOADER_SIZE = 1024
-    endif
-endif
-ifeq ($(strip $(BOOTLOADER)), caterina)
-    OPT_DEFS += -DBOOTLOADER_CATERINA
-    BOOTLOADER_SIZE = 4096
-endif
-ifneq (,$(filter $(BOOTLOADER), bootloadhid bootloadHID))
-    OPT_DEFS += -DBOOTLOADER_BOOTLOADHID
-    BOOTLOADER_SIZE = 4096
-endif
-ifneq (,$(filter $(BOOTLOADER), usbasploader USBasp))
-    OPT_DEFS += -DBOOTLOADER_USBASP
-    BOOTLOADER_SIZE = 4096
-endif
-ifeq ($(strip $(BOOTLOADER)), lufa-ms)
-    OPT_DEFS += -DBOOTLOADER_MS
-    BOOTLOADER_SIZE ?= 8192
-    FIRMWARE_FORMAT = bin
-cpfirmware: lufa_warning
-.INTERMEDIATE: lufa_warning
-lufa_warning: $(FIRMWARE_FORMAT)
-	$(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@)
-	$(info LUFA MASS STORAGE Bootloader selected)
-	$(info DO NOT USE THIS BOOTLOADER IN NEW PROJECTS!)
-	$(info It is extremely prone to bricking, and is only included to support existing boards.)
-	$(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@)
-endif
-ifdef BOOTLOADER_SIZE
-    OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))
-endif
-
-ifeq ($(strip $(BOOTLOADER)), stm32-dfu)
-    OPT_DEFS += -DBOOTLOADER_STM32_DFU
-
-    # Options to pass to dfu-util when flashing
-    DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
-    DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
-endif
-ifeq ($(strip $(BOOTLOADER)), apm32-dfu)
-    OPT_DEFS += -DBOOTLOADER_APM32_DFU
-
-    # Options to pass to dfu-util when flashing
-    DFU_ARGS ?= -d 314B:0106 -a 0 -s 0x08000000:leave
-    DFU_SUFFIX_ARGS ?= -v 314B -p 0106
-endif
-ifeq ($(strip $(BOOTLOADER)), gd32v-dfu)
-    OPT_DEFS += -DBOOTLOADER_GD32V_DFU
-
-    # Options to pass to dfu-util when flashing
-    DFU_ARGS ?= -d 28E9:0189 -a 0 -s 0x08000000:leave
-    DFU_SUFFIX_ARGS ?= -v 28E9 -p 0189
-endif
-ifeq ($(strip $(BOOTLOADER)), kiibohd)
-    OPT_DEFS += -DBOOTLOADER_KIIBOHD
-    ifeq ($(strip $(MCU_ORIG)), MK20DX128)
-        MCU_LDSCRIPT = MK20DX128BLDR4
-    endif
-    ifeq ($(strip $(MCU_ORIG)), MK20DX256)
-        MCU_LDSCRIPT = MK20DX256BLDR8
-    endif
-
-    # Options to pass to dfu-util when flashing
-    DFU_ARGS = -d 1C11:B007
-    DFU_SUFFIX_ARGS = -v 1C11 -p B007
-endif
-ifeq ($(strip $(BOOTLOADER)), stm32duino)
-    OPT_DEFS += -DBOOTLOADER_STM32DUINO
-    MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-    BOARD = STM32_F103_STM32DUINO
-    # STM32F103 does NOT have an USB bootloader in ROM (only serial), so setting anything here does not make much sense
-    STM32_BOOTLOADER_ADDRESS = 0x80000000
-
-    # Options to pass to dfu-util when flashing
-    DFU_ARGS = -d 1EAF:0003 -a 2 -R
-    DFU_SUFFIX_ARGS = -v 1EAF -p 0003
-endif
-ifeq ($(strip $(BOOTLOADER)), tinyuf2)
-    OPT_DEFS += -DBOOTLOADER_TINYUF2
-endif

builddefs/generic_features.mk

@@ -1,52 +0,0 @@
-# Copyright 2021 QMK
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-SPACE_CADET_ENABLE ?= yes
-GRAVE_ESC_ENABLE ?= yes
-
-GENERIC_FEATURES = \
-    COMBO \
-    COMMAND \
-    DEFERRED_EXEC \
-    DIGITIZER \
-    DIP_SWITCH \
-    DYNAMIC_KEYMAP \
-    DYNAMIC_MACRO \
-    ENCODER \
-    GRAVE_ESC \
-    HAPTIC \
-    KEY_LOCK \
-    KEY_OVERRIDE \
-    LEADER \
-    PROGRAMMABLE_BUTTON \
-    SPACE_CADET \
-    SWAP_HANDS \
-    TAP_DANCE \
-    VELOCIKEY \
-    WPM \
-    DYNAMIC_TAPPING_TERM \
-
-define HANDLE_GENERIC_FEATURE
-    # $$(info "Processing: $1_ENABLE $2.c")
-    SRC += $$(wildcard $$(QUANTUM_DIR)/process_keycode/process_$2.c)
-    SRC += $$(wildcard $$(QUANTUM_DIR)/$2.c)
-    OPT_DEFS += -D$1_ENABLE
-endef
-
-$(foreach F,$(GENERIC_FEATURES),\
-    $(if $(filter yes, $(strip $($(F)_ENABLE))),\
-        $(eval $(call HANDLE_GENERIC_FEATURE,$(F),$(shell echo $(F) | tr '[:upper:]' '[:lower:]'))) \
-    ) \
-)

builddefs/show_options.mk

@@ -1,148 +0,0 @@
-BUILD_OPTION_NAMES = \
-  BOOTMAGIC_ENABLE \
-  MOUSEKEY_ENABLE \
-  EXTRAKEY_ENABLE \
-  CONSOLE_ENABLE \
-  COMMAND_ENABLE \
-  NKRO_ENABLE \
-  TERMINAL_ENABLE \
-  CUSTOM_MATRIX \
-  DEBOUNCE_TYPE \
-  SPLIT_KEYBOARD \
-  DYNAMIC_KEYMAP_ENABLE \
-  USB_HID_ENABLE \
-  VIA_ENABLE
-
-HARDWARE_OPTION_NAMES = \
-  SLEEP_LED_ENABLE \
-  BACKLIGHT_ENABLE \
-  BACKLIGHT_DRIVER \
-  RGBLIGHT_ENABLE \
-  RGBLIGHT_CUSTOM_DRIVER \
-  RGB_MATRIX_ENABLE \
-  RGB_MATRIX_DRIVER \
-  CIE1931_CURVE \
-  MIDI_ENABLE \
-  BLUETOOTH_ENABLE \
-  BLUETOOTH_DRIVER \
-  AUDIO_ENABLE \
-  HD44780_ENABLE \
-  ENCODER_ENABLE \
-  LED_TABLES \
-  POINTING_DEVICE_ENABLE \
-  DIP_SWITCH_ENABLE
-
-OTHER_OPTION_NAMES = \
-  UNICODE_ENABLE \
-  UCIS_ENABLE \
-  UNICODEMAP_ENABLE \
-  UNICODE_COMMON \
-  AUTO_SHIFT_ENABLE \
-  AUTO_SHIFT_MODIFIERS \
-  DYNAMIC_TAPPING_TERM_ENABLE \
-  COMBO_ENABLE \
-  KEY_LOCK_ENABLE \
-  KEY_OVERRIDE_ENABLE \
-  LEADER_ENABLE \
-  PRINTING_ENABLE \
-  STENO_ENABLE \
-  TAP_DANCE_ENABLE \
-  VIRTSER_ENABLE \
-  OLED_ENABLE \
-  OLED_DRIVER \
-  LED_BACK_ENABLE \
-  LED_UNDERGLOW_ENABLE \
-  LED_ANIMATIONS \
-  IOS_DEVICE_ENABLE \
-  HELIX ZINC \
-  AUTOLOG_ENABLE \
-  DEBUG_ENABLE \
-  ENCODER_ENABLE_CUSTOM \
-  GERMAN_ENABLE \
-  HAPTIC_ENABLE \
-  HHKB_RN42_ENABLE \
-  ISSI_ENABLE \
-  KEYLOGGER_ENABLE \
-  LCD_BACKLIGHT_ENABLE \
-  MACROS_ENABLED \
-  PS2_MOUSE_ENABLE \
-  RAW_ENABLE \
-  SWAP_HANDS_ENABLE \
-  RING_BUFFERED_6KRO_REPORT_ENABLE \
-  WATCHDOG_ENABLE \
-  ERGOINU \
-  NO_USB_STARTUP_CHECK \
-  DISABLE_PROMICRO_LEDs \
-  MITOSIS_DATAGROK_BOTTOMSPACE \
-  MITOSIS_DATAGROK_SLOWUART \
-  RGB_MATRIX_KEYPRESSES \
-  LED_MIRRORED \
-  RGBLIGHT_FULL_POWER \
-  LTO_ENABLE \
-  PROGRAMMABLE_BUTTON_ENABLE
-
-define NAME_ECHO
-       @printf "  %-30s = %-16s # %s\\n" "$1" "$($1)" "$(origin $1)"
-
-endef
-
-define YAML_NAME_ECHO
-	@echo '  $1 : "$(strip $($1))"'
-
-endef
-
-.PHONY: show_build_options0 show_build_options
-show_build_options0:
-	@echo " KEYBOARD        = $(KEYBOARD)"
-	@echo " KEYMAP          = $(KEYMAP)"
-	@echo " MCU             = $(MCU)"
-	@echo " MCU_SERIES      = $(MCU_SERIES)"
-	@echo " PLATFORM        = $(PLATFORM)"
-	@echo " BOOTLOADER      = $(BOOTLOADER)"
-	@echo " FIRMWARE_FORMAT = $(FIRMWARE_FORMAT)"
-	@echo
-	@echo "Build Options:"
-	$(foreach A_OPTION_NAME,$(sort $(BUILD_OPTION_NAMES)),\
-		$(call NAME_ECHO,$(A_OPTION_NAME)))
-
-show_build_options: show_build_options0
-	@echo
-	@echo "If you want to know more, please try 'show_all_features' or 'show_full_features'"
-	@echo
-
-.PHONY: show_all_features
-show_all_features: show_build_options0
-	@echo
-	@echo "Hardware Options:"
-	$(foreach A_OPTION_NAME,$(sort $(HARDWARE_OPTION_NAMES)),\
-		$(if $($(A_OPTION_NAME)),$(call NAME_ECHO,$(A_OPTION_NAME))))
-	@echo
-	@echo "Other Options:"
-	$(foreach A_OPTION_NAME,$(sort $(OTHER_OPTION_NAMES)),\
-		$(if $($(A_OPTION_NAME)),$(call NAME_ECHO,$(A_OPTION_NAME))))
-
-.PHONY: show_full_features
-show_full_features: show_build_options0
-	@echo
-	@echo "Hardware Options:"
-	$(foreach A_OPTION_NAME,$(sort $(HARDWARE_OPTION_NAMES)),\
-		$(call NAME_ECHO,$(A_OPTION_NAME)))
-	@echo
-	@echo "Other Options:"
-	$(foreach A_OPTION_NAME,$(sort $(OTHER_OPTION_NAMES)),\
-		$(call NAME_ECHO,$(A_OPTION_NAME)))
-
-.PHONY: yaml_build_options
-yaml_build_options:
-	@echo '- KEYBOARD : "$(KEYBOARD)"'
-	@echo '  KEYMAP : "$(KEYMAP)"'
-	@echo '  MCU : "$(MCU)"'
-	@echo '  MCU_SERIES : "$(MCU_SERIES)"'
-	@echo '  PLATFORM : "$(PLATFORM)"'
-	@echo '  FIRMWARE_FORMAT : "$(FIRMWARE_FORMAT)"'
-	$(foreach A_OPTION_NAME,$(sort $(BUILD_OPTION_NAMES)),\
-		$(call YAML_NAME_ECHO,$(A_OPTION_NAME)))
-	$(foreach A_OPTION_NAME,$(sort $(HARDWARE_OPTION_NAMES)),\
-		$(if $($(A_OPTION_NAME)),$(call YAML_NAME_ECHO,$(A_OPTION_NAME))))
-	$(foreach A_OPTION_NAME,$(sort $(OTHER_OPTION_NAMES)),\
-		$(if $($(A_OPTION_NAME)),$(call YAML_NAME_ECHO,$(A_OPTION_NAME))))