add keys

This is the final version of my layout.

Overall changes
===============

* Updated to work with QMK master.

Miscellaneous
=============

* The `😂` symbol can be entered with UCIS.
* `LEAD r` now inputs `Right Alt`.

Signed-off-by: Gergely Nagy <me@gergo.csillger.hu>

build_keyboard.mk

@@ -16,6 +16,7 @@ include common.mk
 KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
 TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
 KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
+STM32_PATH := quantum/stm32
 
 # Force expansion
 TARGET := $(TARGET)
@@ -68,6 +69,7 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
     KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
 endif
 
+
 # Pull in rules.mk files from all our subfolders
 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
     include $(KEYBOARD_PATH_5)/rules.mk
@@ -85,6 +87,19 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
     include $(KEYBOARD_PATH_1)/rules.mk
 endif
 
+ifeq ($(strip $(PROTON)), yes)
+    OPT_DEFS += -DPROTON_CONVERSION
+    include $(STM32_PATH)/proton_c.mk
+endif
+
+include quantum/mcu_selection.mk
+
+ifdef MCU_FAMILY
+    OPT_DEFS += -DQMK_STM32
+    KEYBOARD_PATHS += $(STM32_PATH)
+endif
+
+
 # Find all the C source files to be compiled in subfolders.
 KEYBOARD_SRC :=
 

drivers/boards/GENERIC_STM32_F303XC/board.h

@@ -18,14 +18,14 @@
 #define _BOARD_H_
 
 /*
- * Setup for Clueboard 60% Keyboard
+ * Setup for Generic STM32_F303 Board
  */
 
 /*
  * Board identifier.
  */
 #define BOARD_GENERIC_STM32_F303XC
-#define BOARD_NAME                  "Planck PCB"
+#define BOARD_NAME                  "STM32_F303"
 
 /*
  * Board oscillators-related settings.

keyboards/ergodox_ez/config.h

@@ -85,17 +85,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBW 1
 
-/* "debounce" is measured in keyboard scans. Some users reported
- * needing values as high as 15, which was at the time around 50ms.
+/*
+ * The debounce filtering reports a key/switch change directly,
+ * without any extra delay. After that the debounce logic will filter
+ * all further changes, until the key/switch reports the same state for
+ * the given count of scans.
+ * So a perfect switch will get a short debounce period and
+ * a bad key will get a much longer debounce period.
+ * The result is an adaptive debouncing period for each switch.
+ *
  * If you don't define it here, the matrix code will default to
  * 5, which is now closer to 10ms, but still plenty according to
  * manufacturer specs.
- *
- * Default is quite high, because of reports with some production
- * runs seeming to need it. This may change when configuration for
- * this is more directly exposed.
  */
-#define DEBOUNCE    15
+#define DEBOUNCE    10
 
 #define USB_MAX_POWER_CONSUMPTION 500
 

keyboards/ergodox_ez/matrix.c

@@ -57,6 +57,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* matrix state(1:on, 0:off) */
 static matrix_row_t matrix[MATRIX_ROWS];
+/*
+ * matrix state(1:on, 0:off)
+ * contains the raw values without debounce filtering of the last read cycle.
+ */
+static matrix_row_t raw_matrix[MATRIX_ROWS];
 
 // Debouncing: store for each key the number of scans until it's eligible to
 // change.  When scanning the matrix, ignore any changes in keys that have
@@ -118,6 +123,7 @@ void matrix_init(void)
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
         matrix[i] = 0;
+        raw_matrix[i] = 0;
         for (uint8_t j=0; j < MATRIX_COLS; ++j) {
             debounce_matrix[i * MATRIX_COLS + j] = 0;
         }
@@ -151,26 +157,30 @@ void matrix_power_up(void) {
 
 // Returns a matrix_row_t whose bits are set if the corresponding key should be
 // eligible to change in this scan.
-matrix_row_t debounce_mask(uint8_t row) {
+matrix_row_t debounce_mask(matrix_row_t rawcols, uint8_t row) {
   matrix_row_t result = 0;
-  for (uint8_t j=0; j < MATRIX_COLS; ++j) {
-    if (debounce_matrix[row * MATRIX_COLS + j]) {
-      --debounce_matrix[row * MATRIX_COLS + j];
+  matrix_row_t change = rawcols ^ raw_matrix[row];
+  raw_matrix[row] = rawcols;
+  for (uint8_t i = 0; i < MATRIX_COLS; ++i) {
+    if (debounce_matrix[row * MATRIX_COLS + i]) {
+      --debounce_matrix[row * MATRIX_COLS + i];
     } else {
-      result |= (1 << j);
+      result |= (1 << i);
+    }
+    if (change & (1 << i)) {
+      debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE;
     }
   }
   return result;
 }
 
-// Report changed keys in the given row.  Resets the debounce countdowns
-// corresponding to each set bit in 'change' to DEBOUNCE.
-void debounce_report(matrix_row_t change, uint8_t row) {
-  for (uint8_t i = 0; i < MATRIX_COLS; ++i) {
-    if (change & (1 << i)) {
-      debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE;
-    }
-  }
+matrix_row_t debounce_read_cols(uint8_t row) {
+  // Read the row without debouncing filtering and store it for later usage.
+  matrix_row_t cols = read_cols(row);
+  // Get the Debounce mask.
+  matrix_row_t mask = debounce_mask(cols, row);
+  // debounce the row and return the result.
+  return (cols & mask) | (matrix[row] & ~mask);;
 }
 
 uint8_t matrix_scan(void)
@@ -214,15 +224,12 @@ uint8_t matrix_scan(void)
         select_row(i + MATRIX_ROWS_PER_SIDE);
         // we don't need a 30us delay anymore, because selecting a
         // left-hand row requires more than 30us for i2c.
-        matrix_row_t mask = debounce_mask(i);
-        matrix_row_t cols = (read_cols(i) & mask) | (matrix[i] & ~mask);
-        debounce_report(cols ^ matrix[i], i);
-        matrix[i] = cols;
+
+        // grab cols from left hand
+        matrix[i] = debounce_read_cols(i);
         // grab cols from right hand
-        mask = debounce_mask(i + MATRIX_ROWS_PER_SIDE);
-        cols = (read_cols(i + MATRIX_ROWS_PER_SIDE) & mask) | (matrix[i + MATRIX_ROWS_PER_SIDE] & ~mask);
-        debounce_report(cols ^ matrix[i + MATRIX_ROWS_PER_SIDE], i + MATRIX_ROWS_PER_SIDE);
-        matrix[i + MATRIX_ROWS_PER_SIDE] = cols;
+        matrix[i + MATRIX_ROWS_PER_SIDE] = debounce_read_cols(i + MATRIX_ROWS_PER_SIDE);
+
         unselect_rows();
     }
 
@@ -379,7 +386,7 @@ static void select_row(uint8_t row)
                 break;
             case 11:
                 DDRD  |= (1<<2);
-                PORTD &= ~(1<<3);
+                PORTD &= ~(1<<2);
                 break;
             case 12:
                 DDRD  |= (1<<3);
@@ -392,4 +399,3 @@ static void select_row(uint8_t row)
         }
     }
 }
-

keyboards/idobo/keymaps/default75/config.h

@@ -0,0 +1,21 @@
+/* Copyright 2017 Benjamin Kesselring
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+
+// place overrides here
+

keyboards/idobo/keymaps/default75/keymap.c

@@ -0,0 +1,67 @@
+/* Copyright 2018 Milton Griffin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Keyboard Layers
+#define _QW 0
+#define _FN 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | -      | `      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | [      | \      | ]      | Y      | U      | I      | O      | P      | '      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | CAP LK | A      | S      | D      | F      | G      | HOME   | DEL    | PG UP  | H      | J      | K      | L      | ;      | ENTER  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | END    | UP     | PG DN  | N      | M      | ,      | .      | /      | RSHIFT |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * | LCTRL  | LGUI   | LALT   | FN     | SPACE  | SPACE  | LEFT   | DOWN   | RIGHT  | SPACE  | SPACE  | FN     | RALT   | RGUI   | RCTRL  |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_QW] = LAYOUT_ortho_5x15( /* QWERTY */
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS, KC_GRV,  KC_EQL,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC, KC_BSLS, KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_QUOT, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_HOME, KC_DEL,  KC_PGUP, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,  \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,  KC_UP,   KC_PGDN, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, MO(_FN), KC_SPC,  KC_SPC,  KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC,  KC_SPC,  MO(_FN), KC_RALT, KC_RGUI, KC_RCTL  \
+ ),
+
+/* FUNCTION
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | F1     | F2     | F3     | F4     | F5     | F6     | NUM LK | P/     | P*     | F7     | F8     | F9     | F10    | F11    | F12    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | SELECT | CALC   | MYCOMP | MAIL   | RGB HD | RGB HI | P7     | P8     | P9     | -      |        |        | PR SCR | SCR LK | PAUSE  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | PREV   | PLAY   | NEXT   | STOP   | RGB SD | RGB SI | P4     | P5     | P6     | +      |        | RESET  |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | VOL-   | MUTE   | VOL+   | APP    | RGB VD | RGB VI | P1     | P2     | P3     | PENT   |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        | RGB TG | FN     | RGB RMD| RGB MD | P0     |        | P.     | PENT   | PENT   | FN     |        |        |        |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+ 
+ [_FN] = LAYOUT_ortho_5x15( /* FUNCTION */
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_NLCK, KC_SLSH, KC_ASTR, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  \
+    KC_MSEL, KC_CALC, KC_MYCM, KC_MAIL, RGB_HUD, RGB_HUI, KC_P7,   KC_P8,   KC_P9,   KC_MINS, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, \
+    KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, RGB_SAD, RGB_SAI, KC_P4,   KC_P5,   KC_P6,   KC_PLUS, _______, RESET,   _______, _______, _______, \
+    KC_VOLD, KC_MUTE, KC_VOLU, KC_APP,  RGB_VAD, RGB_VAI, KC_P1,   KC_P2,   KC_P3,   KC_PENT, _______, _______, _______, _______, _______, \
+    _______, _______, RGB_TOG, MO(_FN), RGB_RMOD,RGB_MOD, KC_P0,   _______, KC_PDOT, KC_PENT, KC_PENT, MO(_FN), _______, _______, _______  \
+ ),
+};

keyboards/idobo/keymaps/default75/readme.md

@@ -0,0 +1 @@
+# The default keymap for xd75, with led controls

keyboards/idobo/keymaps/default75/rules.mk

@@ -0,0 +1,14 @@
+# Copyright 2013 Jun Wako <wakojun@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.

keyboards/planck/rev6/rules.mk

@@ -2,41 +2,8 @@
 SRC =	matrix.c
 LAYOUTS += ortho_4x12
 
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
 # Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+MCU  = STM32F303
 
 # Build Options
 #   comment out to disable the options.

keyboards/planck/rules.mk

@@ -1,39 +1,6 @@
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
 # Bootloader
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
 #     different sizes, comment this out, and the correct address will be loaded

keyboards/proton_c/config.h

@@ -33,7 +33,6 @@
 #define MATRIX_ROW_PINS { B9 }
 #define MATRIX_COL_PINS { B0 }
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 6
 

keyboards/rama/m60_a/rules.mk

@@ -54,7 +54,7 @@ BOOTLOADER = atmel-dfu
 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
@@ -68,7 +68,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -76,3 +76,5 @@ SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 RAW_ENABLE = yes
 DYNAMIC_KEYMAP_ENABLE = yes
 CIE1931_CURVE = yes
+
+LAYOUTS = 60_hhkb

keyboards/subatomic/config.h

@@ -24,24 +24,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6063
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    Ortholinear Keyboards
-#define PRODUCT         The Subatomic Keyboard
+#define MANUFACTURER    OLKB
+#define PRODUCT         Subatomic
 #define DESCRIPTION     A compact ortholinear keyboard
 
 /* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
 
 /* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { D2, D5, B5, B6, D3 }
-#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7, C6, C5 }
+#define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2, A3, A6 }
+#define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0, B9, B8 }
 #define UNUSED_PINS
 
 // #define AUDIO_VOICES
 // #define C6_AUDIO
 
-#define BACKLIGHT_PIN B7
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 

keyboards/subatomic/keymaps/default/config.h

@@ -1,29 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 2
-
-#endif

keyboards/subatomic/keymaps/default/keymap.c

@@ -44,13 +44,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Pg Dn| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  | Right|   \  |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_QWERTY] = {
-  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
-  {KC_TRNS, KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,  KC_TRNS},
-  {KC_TRNS, KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_TRNS},
-  {KC_TRNS, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  KC_TRNS},
-  {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS}
-},
+[_QWERTY] = LAYOUT_ortho_5x14(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
 
 /* Colemak
  * ,-------------------------------------------------------------------------------------------------.
@@ -65,13 +65,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Pg Dn| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  | Right|   \  |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_COLEMAK] = {
-  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
-  {KC_TRNS, KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL,  KC_TRNS},
-  {KC_TRNS, KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, KC_TRNS},
-  {KC_TRNS, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  KC_TRNS},
-  {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS}
-},
+[_COLEMAK] = LAYOUT_ortho_5x14(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL,
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
 
 /* Dvorak
  * ,-------------------------------------------------------------------------------------------------.
@@ -86,13 +86,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Pg Dn| Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  | Right|   \  |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_DVORAK] = {
-  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
-  {KC_TRNS, KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL,  KC_TRNS},
-  {KC_TRNS, KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, KC_TRNS},
-  {KC_TRNS, KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT,  KC_TRNS},
-  {KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS}
-},
+[_DVORAK] = LAYOUT_ortho_5x14(
+  KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS,
+  KC_TRNS, KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL,  KC_TRNS,
+  KC_TRNS, KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, KC_TRNS,
+  KC_TRNS, KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT,  KC_TRNS,
+  KC_TRNS, BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS
+),
 
 /* Lower
  * ,-------------------------------------------------------------------------------------------------.
@@ -107,13 +107,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |      |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_LOWER] = {
-  {KC_TRNS, KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, KC_TRNS},
-  {KC_TRNS, KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  KC_TRNS},
-  {KC_TRNS, KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS},
-  {KC_TRNS, _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______,KC_TRNS},
-  {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_TRNS}
-},
+[_LOWER] = LAYOUT_ortho_5x14(
+   KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
+   KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______,
+   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+  ),
 
 /* Raise
  * ,-------------------------------------------------------------------------------------------------.
@@ -128,13 +128,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |      |             |      | Next | Vol- | Vol+ |      | Play |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_RAISE] = {
-  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, KC_TRNS},
-  {KC_TRNS, KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  KC_TRNS},
-  {KC_TRNS, KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, KC_TRNS},
-  {KC_TRNS, _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, KC_TRNS},
-  {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_TRNS}
-},
+[_RAISE] = LAYOUT_ortho_5x14(
+   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______,
+   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
 
 /* Adjust (Lower + Raise)
  * ,-------------------------------------------------------------------------------------------------.
@@ -149,13 +149,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |      |             |      |      |      |      |      |      |
  * `-------------------------------------------------------------------------------------------------'
  */
-[_ADJUST] = {
-  {KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS},
-  {KC_TRNS, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,  KC_TRNS},
-  {KC_TRNS, _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, KC_TRNS},
-  {KC_TRNS, _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______, KC_TRNS},
-  {KC_TRNS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_TRNS}
-}
+[_ADJUST] = LAYOUT_ortho_5x14(
+   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+   _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
+   _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______,
+   _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______,
+   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+)
 
 
 };

keyboards/subatomic/rules.mk

@@ -1,69 +1,22 @@
+# project specific files
+#SRC = matrix.c
 
-
-# MCU name
-MCU = at90usb1286
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=8192
+# Cortex version
+MCU  = STM32F303
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
+#   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-MIDI_ENABLE = yes            # MIDI controls
-AUDIO_ENABLE = yes           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
-API_SYSEX_ENABLE = no
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes  # Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes     # USB Nkey Rollover
+#CUSTOM_MATRIX = yes # Custom matrix file
+AUDIO_ENABLE = yes
+RGBLIGHT_ENABLE = no
+# SERIAL_LINK_ENABLE = yes

keyboards/subatomic/subatomic.h

@@ -3,4 +3,25 @@
 
 #include "quantum.h"
 
-#endif
+
+#define LAYOUT_ortho_5x14( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, KC_NO, KC_NO }, \
+    { k10, k11, k12, k13, k14, k15, KC_NO, KC_NO }, \
+    { k20, k21, k22, k23, k24, k25, KC_NO, KC_NO }, \
+    { k30, k31, k32, k33, k34, k35, KC_NO, KC_NO }, \
+    { k06, k07, k08, k09, k0a, k0b, k0c,   k0d }, \
+    { k16, k17, k18, k19, k1a, k1b, k1c,   k1d }, \
+    { k26, k27, k28, k29, k2a, k2b, k2c,   k2d }, \
+    { k36, k37, k38, k39, k3a, k3b, k3c,   k3d }, \
+    { k40, k41, k42, k49, k4a, k4b, k4c,   k4d }, \
+    { k46, k47, k48, k43, k44, k45, KC_NO, KC_NO }, \
+}
+
+#endif

keyboards/thevankeyboards/minivan/keymaps/talljoe-minivan/config.h

@@ -11,7 +11,7 @@
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
     K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
     K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
-) KEYMAP_ARROW( \
+) LAYOUT_arrow( \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1D, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
     K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K0D, \
@@ -24,7 +24,7 @@
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
     K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
     K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
-) KEYMAP_ARROW( \
+) LAYOUT_arrow( \
     K00, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1D, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2C, \
     K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
@@ -37,14 +37,14 @@
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
     K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
     K40, K41, K42,      K44, K45, K46,      K48, K49,      K4B, K4C                 \
-) KEYMAP_ARROW( \
+) LAYOUT_arrow( \
     K00, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K2D, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2C, \
     K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
-    K40, K49, K42,      K44, K45,      K48, K0B, K0C, K4C       \
+    K40, K41, K42,      K44, K45,      K48, K0B, K0C, K4C       \
 )
 
-#define TEMPLATE_RESET KEYMAP_ARROW( \
+#define TEMPLATE_RESET LAYOUT_arrow( \
     RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET, \
     KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
     KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \

layouts/community/60_ansi_split_bs_rshift/talljoe/config.h

@@ -34,7 +34,7 @@
    { K40, K41, K42, {}, {}, {}, {}, K47, {}, {}, K4A, K4B, K4C, K4D } \
   }
 
-#ifdef KEYBOARD_zeal60
+#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A)
 
   #define ZEAL_RGB
 

layouts/community/60_ansi_split_bs_rshift/talljoe/keymap.c

@@ -1,94 +1 @@
-#ifdef KEYBOARD_zeal60
-#include "config.h"
-#include "zeal60.h"
-#include "rgb_backlight.h"
-#include "action_layer.h"
-#include "solarized.h"
-#include "talljoe.h"
-
-// from zeal_backlight.c
-// we want to be able to set indicators for the spacebar stabs
-// but they are not represented by a row/index.
-extern backlight_config g_config;
-void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led );
-
-void set_backlight_defaults(void) {
-  uint8_t space;
-  uint8_t caps_lock;
-  map_row_column_to_led(3, 12, &caps_lock);
-  map_row_column_to_led(4, 7, &space);
-  backlight_config default_values = {
-    .use_split_backspace = USE_SPLIT_BACKSPACE,
-    .use_split_left_shift = USE_SPLIT_LEFT_SHIFT,
-    .use_split_right_shift = USE_SPLIT_RIGHT_SHIFT,
-    .use_7u_spacebar = USE_7U_SPACEBAR,
-    .use_iso_enter = USE_ISO_ENTER,
-    .disable_when_usb_suspended = 1,
-    .disable_after_timeout = 0,
-    .brightness = 255,
-    .effect = 10,
-    .color_1 = solarized.base2,
-    .color_2 = solarized.base02,
-    .caps_lock_indicator = { .index = caps_lock, .color = solarized.red },
-    .layer_1_indicator = { .index = space, .color = solarized.blue },
-    .layer_2_indicator = { .index = space, .color = solarized.yellow },
-    .layer_3_indicator = { .index = 254, .color = solarized.red },
-    .alphas_mods = {
-      RGB_BACKLIGHT_ALPHAS_MODS_ROW_0,
-      RGB_BACKLIGHT_ALPHAS_MODS_ROW_1,
-      RGB_BACKLIGHT_ALPHAS_MODS_ROW_2,
-      RGB_BACKLIGHT_ALPHAS_MODS_ROW_3,
-      RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 }
-  };
-  memcpy(&g_config, &default_values, sizeof(backlight_config));
-  backlight_config_save();
-
-#undef CUSTOM_RGB_LAYOUTS
-#ifdef CUSTOM_RGB_LAYOUTS
-  solarized_t* S = &solarized;
-  HSV alphas = S->base2;
-  HSV custom_color_map[MATRIX_ROWS][MATRIX_COLS] = CM(
-    S->red, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->red,
-    S->orange, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->orange,
-    S->green, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->green,
-    S->blue, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, alphas, S->blue, S->blue,
-    S->violet, S->magenta, S->yellow,              alphas,          S->yellow, S->magenta, S->violet, S->green
-  );
-  for (uint8_t row = 0; row < MATRIX_ROWS; ++row) {
-    for (uint8_t col = 0; col < MATRIX_COLS; ++col) {
-      uint8_t index;
-			map_row_column_to_led( row, col, &index );
-      set_key_color(index, custom_color_map[row][col]);
-    }
-  }
-#endif // CUSTOM_RGB_LAYOUTS
-}
-
-bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  static uint8_t last_effect;
-  switch (keycode) {
-    case DFAULTS:
-      if (IS_PRESSED(record->event)) set_backlight_defaults();
-      return false;
-    case BL_TOGG:
-      if (IS_PRESSED(record->event)) {
-        if (g_config.effect) {
-          last_effect = g_config.effect;
-          g_config.effect = 0;
-        } else {
-          g_config.effect = last_effect;
-        }
-      }
-      return false;
-    case EFFECT...EFFECT_END:
-      if (IS_PRESSED(record->event)) {
-        uint8_t effect = keycode - EFFECT;
-        g_config.effect = effect;
-        backlight_config_save();
-      }
-      return false;
-  }
-
-  return true;
-}
-#endif
+// This space intentionally left blank

layouts/community/60_hhkb/talljoe-hhkb/config.h

@@ -19,4 +19,7 @@
          K41, K42,           K45,           K48, K4C                                \
 )
 
+#ifdef RGB_BACKLIGHT_M60_A
+  #define ZEAL_RGB
+#endif
 #endif //CONFIG_USER_H

layouts/community/ergodox/algernon/NEWS.md

@@ -1,5 +1,18 @@
 <!-- -*- mode: markdown; fill-column: 8192 -*- -->
 
+## v1.12
+
+*2018-11-22*
+
+### Overall changes
+
+* Updated to work with QMK master.
+
+### Miscellaneous
+
+* The `😂` symbol can be entered with UCIS.
+* `LEAD r` now inputs `Right Alt`.
+
 ## v1.11
 
 *2017-10-01*