Improve state/chord handling and clean up namespace

Some values that can never, ever, change were held in local
variables, rather than in PROGMEM. Fixed.

Change "pressed" to a signed int so the test for < 0 makes
sense, and to avoid possible weird failure modes in the
case where a key release comes in when pressed is already
zero. (Shouldn't happen, sure, but computers are weird.)

A lot of things in process_steno had external linkage for no
particular reason. They've been marked static. Stuff still
builds.

Distinguish between currently-held keys and keys that have
been held, and expose these values through a nicely-named API
so other code could, say, check on the current set of steno
chording in order to make displays. Also in passing fix up the
"state" value having external linkage so it could clash with
other people's variable declarations.

The API also provides hooks for key processing and steno chord
events, so you can monitor those events without having to
run in matrix_scan_user and recheck the values directly. Also
document these.

There is no path through processing a key that doesn't
end with a return false, so the nested return foo() are
gone and we just return false.

build_keyboard.mk

@@ -143,6 +143,8 @@ ifeq ($(PLATFORM),CHIBIOS)
         OPT_DEFS += -include $(KEYBOARD_PATH_1)/bootloader_defs.h
      else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h)","")
         OPT_DEFS += -include $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h
+    else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h)","")
+        OPT_DEFS += -include $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h
     endif
 endif
 

docs/feature_stenography.md

@@ -56,6 +56,29 @@ On the display tab click 'Open stroke display'. With Plover disabled you should
 * [Steno Jig](https://joshuagrams.github.io/steno-jig/)
 * More resources at the Plover [Learning Stenography](https://github.com/openstenoproject/plover/wiki/Learning-Stenography) wiki
 
+## Interfacing with the code
+
+The steno code has three interceptible hooks. If you define these functions, they will be called at certain points in processing; if they return true, processing continues, otherwise it's assumed you handled things.
+
+```C
+bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]);
+```
+
+This function is called when a chord is about to be sent. Mode will be one of `STENO_MODE_BOLT` or `STENO_MODE_GEMINI`. This represents the actual chord that would be sent via whichever protocol. You can modify the chord provided to alter what gets sent. Remember to return true if you want the regular sending process to happen.
+
+```C
+bool process_steno_user(uint16_t keycode, keyrecord_t *record) { return true; }
+```
+
+This function is called when a keypress has come in, before it is processed. The keycode should be one of `QK_STENO_BOLT`, `QK_STENO_GEMINI`, or one of the `STN_*` key values.
+
+```C
+bool postprocess_steno_user(uint16_t keycode, keyrecord_t *record, steno_mode_t mode, uint8_t chord[6], int8_t pressed);
+```
+
+This function is called after a key has been processed, but before any decision about whether or not to send a chord. If `IS_PRESSED(record->event)` is false, and `pressed` is 0 or 1, the chord will be sent shortly, but has not yet been sent. This is where to put hooks for things like, say, live displays of steno chords or keys.
+
+
 ## Keycode Reference
 
 As defined in `keymap_steno.h`.
@@ -106,3 +129,4 @@ As defined in `keymap_steno.h`.
 |`STN_RES1`||(GeminiPR only)|
 |`STN_RES2`||(GeminiPR only)|
 |`STN_PWR`||(GeminiPR only)|
+

drivers/boards/IC_TEENSY_3_1/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/IC_TEENSY_3_1/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/IC_TEENSY_3_1

keyboards/atom47/atom47.c

@@ -16,16 +16,9 @@ void matrix_scan_kb(void) {
 
 void led_init_ports(void) {
     // * Set our LED pins as output
-    DDRB &= ~(1<<5);
+    DDRE |= (1 << 6);
 }
 
 void led_set_kb(uint8_t usb_led) {
-	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTF |= (1<<5);
-    } else {
-        // Turn capslock off
-        PORTF &= ~(1<<5);
-    }
-	led_set_user(usb_led);
+    led_set_user(usb_led);
 }

keyboards/atom47/atom47.h

@@ -9,14 +9,14 @@
 #define KEYMAP_ANSI( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,      k2c, \
-	k30, k31, k32, k33, k34,      k36,      k38, k39, k3a,      k3c \
+	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
+	k30, k31, k32, k33,      k35,      k37,      k39, k3a, k3b, k3c \
 ) \
 { \
     {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
 	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
-	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
-	{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c}  \
+	{k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \
+	{k30, k31, k32, k33, XXX, k35, XXX, k37, XXX, k39, k3a, k3b, k3c}  \
 }
 
 void matrix_init_user(void);

keyboards/atom47/config.h

@@ -34,8 +34,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // ROWS: Top to bottom, COLS: Left to right
 
-#define MATRIX_ROW_PINS {B1,B2,B3,B7}
-#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
+#define MATRIX_ROW_PINS {B3,B2,B1,B0}
+#define MATRIX_COL_PINS {B7,F0,F1,F4,F6,D4,D6,D7,B4,B5,C6,C7,F7}
 #define UNUSED_PINS
 
 #define BACKLIGHT_PIN B6
@@ -49,10 +49,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCING_DELAY 5
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
 
 /* key combination for command */
 #define IS_COMMAND() ( \
@@ -63,11 +59,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define BACKLIGHT_LEVELS 4
 
+#define RGB_DI_PIN F5    // The pin the LED strip is connected to
+#define RGBLED_NUM 6     // Number of LEDs in your strip
+
+#define QMK_ESC_OUTPUT B7 // usually COL
+#define QMK_ESC_INPUT B3 // usually ROW
+#define QMK_LED E6
+
 #endif
-
-#define RGB_DI_PIN D0    // The pin the LED strip is connected to
-#define RGBLED_NUM 1     // Number of LEDs in your strip
-
-#define QMK_ESC_OUTPUT D7 // usually COL
-#define QMK_ESC_INPUT B1 // usually ROW
-#define QMK_LED B6

keyboards/atom47/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-#include QMK_KEYBOARD_H
+#include "atom47.h"
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -16,24 +16,37 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_MA] = KEYMAP_ANSI(
   KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
   KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
-  KC_LSFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,				MO(_FN1),	\
-  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_PN),	KC_SPC, 				KC_SPC,					MO(_FN),	KC_RALT,	KC_APP,					KC_RCTRL),	\
+  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,	MO(_FN1),	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_PN),				KC_SPC, 				KC_SPC,					MO(_FN),	KC_RALT,	KC_APP,		KC_RCTRL),	\
  
 [_FN] = KEYMAP_ANSI(
   _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
   KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,				_______,	\
-  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+  _______,					_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
  
 [_FN1] = KEYMAP_ANSI(
   KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
   KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
-  _______,		_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,				_______,	\
-  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+  _______,					_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
  
 [_PN] = KEYMAP_ANSI(
   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
-  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				RESET),
-};
+  RGB_TOG,		RGB_HUI,	RGB_SAI,	RGB_VAI,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  RGB_MOD,					RGB_HUD,	RGB_SAD,	RGB_VAD,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),
+};
+
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+ 	   	PORTE &= ~(1 << 6);
+
+
+    } else {
+        // Turn capslock off
+    	PORTE |= (1 << 6);
+    }
+}
+

keyboards/atom47/keymaps/default/readme.md

@@ -1,10 +1 @@
-To be updated...
-
-
-// This layer is just a blank template to be copied for easy layer creation. please don not edit it.
-
- [_LX] = KEYMAP_ANSI(
-   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
-   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
-   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
-   _______,		_______,	_______,	_______,	    _______, 			_______,			               	_______,	_______,	_______,	RESET),
+This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.

keyboards/atom47/keymaps/maartenwut/keymap.c

@@ -0,0 +1,46 @@
+#include "atom47.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _MA 0 //Main layer
+#define _LO 1 //FN1
+#define _RA 2 //FN
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = KEYMAP_ANSI(
+  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
+  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
+  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	KC_RSFT,	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_LO),				KC_SPC, 				KC_SPC,					MO(_RA),	KC_RALT,	KC_APP,		KC_RCTRL),	\
+
+[_RA] = KEYMAP_ANSI(
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	KC_PGUP,	KC_UP,		KC_PGDN,	_______,	_______,	_______,	\
+  KC_CAPS,		_______,	_______,	_______,	_______,	_______,	_______,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	_______,				_______,	\
+  _______,					_______,	_______,	_______,	_______,	_______,	_______,	_______,	KC_VOLD,	KC_VOLU,	KC_MPLY,	KC_PSCR,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
+
+[_LO] = KEYMAP_ANSI(
+  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
+  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
+  _______,					_______,	_______,	_______,	_______,	_______,	_______,	KC_QUOT,	KC_LBRC,	KC_RBRC,	KC_BSLS,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),	\
+
+};
+
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+ 	   	PORTE &= ~(1 << 6);
+
+
+    } else {
+        // Turn capslock off
+    	PORTE |= (1 << 6);
+    }
+}
+

keyboards/atom47/keymaps/maartenwut/readme.md

@@ -0,0 +1 @@
+This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.

keyboards/atom47/readme.md

@@ -1,28 +1,26 @@
-# ATOM47
+# Atom47
 
-![ATOM47](https://i.imgur.com/rjrFTKT.png)
+![Atom47](https://i.imgur.com/Wwflqvt.png)
 
 ## Support
-Keyboard Maintainer: [Matthew Kerfoot(https://github.com/mkerfoot)  
-Hardware Supported: ATOM47  
+Keyboard Maintainer: [Maarten Dekkers(https://github.com/maartenwut)  
+Hardware Supported: Atom47 rev3
 Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221)  
 
 
 ## Features
-QMK Firmware
-6 Underglow RGB leds
-In-switch leds
-Through-hole micro usb connector (less likely to break off!)
-South facing leds for the QMX/Zealencio users
-Multiple layouts
-Easily reachable reset button under the spacebar
-CapsLock indicator
+- QMK Firmware  
+- 6 Underglow RGB leds  
+- In-switch leds  
+- Through-hole micro usb connector (less likely to break off!)  
+- South facing leds for the QMX/Zealencio users  
+- Multiple layouts  
+- Easily reachable reset button under the spacebar  
+- CapsLock indicator  
 
 ## Build
 To build the default keymap, simply run `make atom47:default`.
 
-For an alternative, heavily modified layout you would just need to run `make atom47:LEdiodes`.
-
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
 
-![ATOM47](https://i.imgur.com/WebeUOF.png)
+![Atom47](https://i.imgur.com/JfYnOba.jpg)

keyboards/atom47/rev2/config.h

@@ -63,11 +63,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define BACKLIGHT_LEVELS 4
 
-#endif
-
 #define RGB_DI_PIN D0    // The pin the LED strip is connected to
 #define RGBLED_NUM 1     // Number of LEDs in your strip
 
 #define QMK_ESC_OUTPUT D7 // usually COL
 #define QMK_ESC_INPUT B1 // usually ROW
-#define QMK_LED B6
+#define QMK_LED B6
+
+#endif

keyboards/atom47/rev2/keymaps/LEdiodes/atom47.c

@@ -0,0 +1,31 @@
+#include "atom47.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB &= ~(1<<5);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTF |= (1<<5);
+    } else {
+        // Turn capslock off
+        PORTF &= ~(1<<5);
+    }
+	led_set_user(usb_led);
+}

keyboards/atom47/rev2/keymaps/LEdiodes/atom47.h

@@ -0,0 +1,25 @@
+#ifndef ATOM47_H
+#define ATOM47_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define KEYMAP_ANSI( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,      k2c, \
+	k30, k31, k32, k33, k34,      k36,      k38, k39, k3a,      k3c \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
+	{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif

keyboards/atom47/rev2/keymaps/LEdiodes/config.h

@@ -0,0 +1,74 @@
+/*
+Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    Vortex
+#define PRODUCT         Core
+#define DESCRIPTION     Atom47 PCB for the Vortex Core
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B1,B2,B3,B7}
+#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+#define RGB_DI_PIN D0    // The pin the LED strip is connected to
+#define RGBLED_NUM 1     // Number of LEDs in your strip
+
+#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_INPUT B1 // usually ROW
+#define QMK_LED B6
+
+#endif
+

keyboards/atom47/rev2/keymaps/LEdiodes/keymap.c

@@ -1,4 +1,4 @@
-#include QMK_KEYBOARD_H
+#include "atom47.h"
 
 // These are all aliases for the  function layers.
 #define _L0 0

keyboards/atom47/rev2/keymaps/default/keymap.c

@@ -0,0 +1,39 @@
+#include "atom47.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _MA 0 //Main layer
+#define _FN 1 //Fn
+#define _FN1 2 //Fn1
+#define _PN 3 //Pn
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = KEYMAP_ANSI(
+  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
+  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
+  KC_LSFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,				MO(_FN1),	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_PN),	KC_SPC, 				KC_SPC,					MO(_FN),	KC_RALT,	KC_APP,					KC_RCTRL),	\
+ 
+[_FN] = KEYMAP_ANSI(
+  _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
+  KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_FN1] = KEYMAP_ANSI(
+  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
+  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
+  _______,		_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_PN] = KEYMAP_ANSI(
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				RESET),
+};

keyboards/atom47/rev2/keymaps/default/readme.md

@@ -0,0 +1 @@
+This is the default keymap as found on the Vortex Core, with some added buttons for backlight control.

keyboards/atom47/rev2/readme.md

@@ -0,0 +1,23 @@
+# Atom47 rev2
+
+This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it.
+
+## Support
+Keyboard Maintainer: [Matthew Kerfoot(https://github.com/mkerfoot)  
+Hardware Supported: Atom47 rev2  
+Hardware Availability: None  
+
+
+## Features
+- QMK Firmware  
+- In-switch leds  
+- Through-hole micro usb connector (less likely to break off!)  
+- Easily reachable reset button under the spacebar  
+- In-switch CapsLock indicator  
+
+## Build
+To build the default keymap, simply run `make atom47/rev2:default`.
+
+For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`.
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/atom47/rev2/rules.mk

@@ -0,0 +1,65 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/atom47/rules.mk

@@ -56,8 +56,8 @@ MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
 CONSOLE_ENABLE = no	# Console for debug(+400)
 COMMAND_ENABLE = no    # Commands for debug and configuration
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+NKRO_ENABLE = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality (+4870)
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
 MIDI_ENABLE = no 		# MIDI controls
 AUDIO_ENABLE = no

keyboards/clueboard/2x1800/2x1800.c

@@ -0,0 +1,62 @@
+/* Copyright 2017 Zach White <skullydazed@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "2x1800.h"
+
+void matrix_init_kb(void) {
+	// Set our LED pins as output
+	DDRB |= (1<<4);  // Numlock
+	DDRB |= (1<<5);  // Capslock
+	DDRB |= (1<<6);  // Scroll Lock
+
+	// JTAG disable for PORT F. write JTD bit twice within four cycles.
+	MCUCR |= (1<<JTD);
+	MCUCR |= (1<<JTD);
+
+	// Run the keymap level init
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+		// Turn numlock on
+		PORTB |= (1<<4);
+	} else {
+		// Turn numlock off
+		PORTB &= ~(1<<4);
+	}
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+		// Turn capslock on
+		PORTB |= (1<<5);
+	} else {
+		// Turn capslock off
+		PORTB &= ~(1<<5);
+	}
+	if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+		// Turn scroll lock on
+		PORTB |= (1<<6);
+	} else {
+		// Turn scroll lock off
+		PORTB &= ~(1<<6);
+	}
+}

keyboards/clueboard/2x1800/2x1800.h

@@ -0,0 +1,93 @@
+/* Copyright 2017 Zach White <skullydazed@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef TWOX1800_H
+#define TWOX1800_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT( \
+      k00, k01, k02, k03,    k04,   k06, k07, k08, k09,   k0a, k60, k61, k62,   k63, k64, k65, k66,    k67, k68, k69, k6a, \
+      k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75,    k76,   k77, k78, k79, k7a, \
+      k20, k21, k22, k23,    k24,  k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85,   k86,  k87, k88, k89, k8a, \
+           k31, k32, k33,   k34,   k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94,    k95,      k97, k98, k99,      \
+      k40, k41, k42, k43,  k44,  k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4,  ka5,  k96,    ka7, ka8, ka9, kaa, \
+           k51, k52,  k53, k54, k55,  k56, k57, k58, k59, k5a, kb0, kb1, kb2, kb3, kb4, kb5, ka6, kb6, kb7, kb8, kb9       \
+) \
+{ \
+    { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \
+    { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \
+    { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a }, \
+    { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \
+    { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \
+    { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \
+    { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, KC_NO }, \
+    { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \
+    { kb0, kb1, kb2, kb3, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO } \
+}
+
+#define LAYOUT_4U_SPACE( \
+      k00, k01, k02, k03,    k04,   k06, k07, k08, k09,   k0a, k60, k61, k62,   k63, k64, k65, k66,    k67, k68, k69, k6a, \
+      k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75,    k76,   k77, k78, k79, k7a, \
+      k20, k21, k22, k23,    k24,  k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85,   k86,  k87, k88, k89, k8a, \
+           k31, k32, k33,   k34,   k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94,    k95,      k97, k98, k99,      \
+      k40, k41, k42, k43,  k44,  k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4,  ka5,  k96,    ka7, ka8, ka9, kaa, \
+           k51, k52,  k53, k54, k55,  k56, k57, k58,           kb0,      kb2, kb3, kb4, kb5, ka6, kb6, kb7, kb8, kb9       \
+) \
+{ \
+    { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \
+    { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \
+    { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, KC_NO, KC_NO }, \
+    { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \
+    { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \
+    { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \
+    { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, KC_NO }, \
+    { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \
+    { kb0, KC_NO, kb2, kb3, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO } \
+}
+
+#define LAYOUT_7U_SPACE( \
+      k00, k01, k02, k03,    k04,   k06, k07, k08, k09,   k0a, k60, k61, k62,   k63, k64, k65, k66,    k67, k68, k69, k6a, \
+      k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75,    k76,   k77, k78, k79, k7a, \
+      k20, k21, k22, k23,    k24,  k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85,   k86,  k87, k88, k89, k8a, \
+           k31, k32, k33,   k34,   k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94,    k95,      k97, k98, k99,      \
+      k40, k41, k42, k43,  k44,  k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4,  ka5,  k96,    ka7, ka8, ka9, kaa, \
+           k51, k52,  k53, k54, k55,  k56, k57,                kb0,                kb4, kb5, ka6, kb6, kb7, kb8, kb9       \
+) \
+{ \
+    { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \
+    { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \
+    { KC_NO, k51, k52, k53, k54, k55, k56, k57, KC_NO, KC_NO, KC_NO }, \
+    { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \
+    { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \
+    { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \
+    { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, KC_NO }, \
+    { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \
+    { kb0, KC_NO, KC_NO, KC_NO, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO } \
+}
+
+#endif

keyboards/clueboard/2x1800/config.h

@@ -0,0 +1,192 @@
+/*
+Copyright 2017 Zach White <skullydazed@clueboard.co>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC1ED
+#define PRODUCT_ID      0x23A0
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Clueboard
+#define PRODUCT         Double 1800
+#define DESCRIPTION     What does it mean?
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 11
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { C0, C1, C2, C3, C7, F7, B1, F2, F3, F4, F5, F6 }
+#define MATRIX_COL_PINS { D2, D3, D4, D5, D7, E0, E1, B0, E6, B3, B2 }
+#define UNUSED_PINS { D0, D1, D6, C5, C6, E4, E5, E7, F0, F1, A0, A1, A2, A3, A4, A5, A6, A7 }
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* audio support */
+#define B7_AUDIO
+#define C4_AUDIO
+
+/* number of backlight levels */
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif

keyboards/clueboard/2x1800/info.json

@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "CB 2x1800", 
+    "identifier": "", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "processor": "at90usb1286", 
+    "bootloader": "teensy", 
+    "width": 24, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"Home", "x":0, "y":0}, {"label":"End", "x":1, "y":0}, {"label":"PgUp", "x":2, "y":0}, {"label":"PgDn", "x":3, "y":0}, {"label":"Esc", "x":4.75, "y":0}, {"label":"F1", "x":6.25, "y":0}, {"label":"F2", "x":7.25, "y":0}, {"label":"F3", "x":8.25, "y":0}, {"label":"F4", "x":9.25, "y":0}, {"label":"F5", "x":10.75, "y":0}, {"label":"F6", "x":11.75, "y":0}, {"label":"F7", "x":12.75, "y":0}, {"label":"F8", "x":13.75, "y":0}, {"label":"F9", "x":15.25, "y":0}, {"label":"F10", "x":16.25, "y":0}, {"label":"F11", "x":17.25, "y":0}, {"label":"F12", "x":18.25, "y":0}, {"label":"PrtSc", "x":20, "y":0}, {"label":"Scroll Lock", "x":21, "y":0}, {"label":"Pause", "x":22, "y":0}, {"label":"Insert", "x":23, "y":0}, {"label":"-", "x":0, "y":1.25}, {"label":"Num Lock", "x":1, "y":1.25}, {"label":"/", "x":2, "y":1.25}, {"label":"*", "x":3, "y":1.25}, {"label":"~", "x":4.5, "y":1.25}, {"label":"!", "x":5.5, "y":1.25}, {"label":"@", "x":6.5, "y":1.25}, {"label":"#", "x":7.5, "y":1.25}, {"label":"$", "x":8.5, "y":1.25}, {"label":"%", "x":9.5, "y":1.25}, {"label":"^", "x":10.5, "y":1.25}, {"label":"&", "x":11.5, "y":1.25}, {"label":"*", "x":12.5, "y":1.25}, {"label":"(", "x":13.5, "y":1.25}, {"label":")", "x":14.5, "y":1.25}, {"label":"_", "x":15.5, "y":1.25}, {"label":"+", "x":16.5, "y":1.25}, {"label":"Backspace", "x":17.5, "y":1.25, "w":2}, {"label":"Num Lock", "x":20, "y":1.25}, {"label":"/", "x":21, "y":1.25}, {"label":"*", "x":22, "y":1.25}, {"label":"-", "x":23, "y":1.25}, {"label":"+", "x":0, "y":2.25, "h":2}, {"label":"7", "x":1, "y":2.25}, {"label":"8", "x":2, "y":2.25}, {"label":"9", "x":3, "y":2.25}, {"label":"Tab", "x":4.5, "y":2.25, "w":1.5}, {"label":"Q", "x":6, "y":2.25}, {"label":"W", "x":7, "y":2.25}, {"label":"E", "x":8, "y":2.25}, {"label":"R", "x":9, "y":2.25}, {"label":"T", "x":10, "y":2.25}, {"label":"Y", "x":11, "y":2.25}, {"label":"U", "x":12, "y":2.25}, {"label":"I", "x":13, "y":2.25}, {"label":"O", "x":14, "y":2.25}, {"label":"P", "x":15, "y":2.25}, {"label":"{", "x":16, "y":2.25}, {"label":"}", "x":17, "y":2.25}, {"label":"|", "x":18, "y":2.25, "w":1.5}, {"label":"7", "x":20, "y":2.25}, {"label":"8", "x":21, "y":2.25}, {"label":"9", "x":22, "y":2.25}, {"label":"+", "x":23, "y":2.25, "h":2}, {"label":"4", "x":1, "y":3.25}, {"label":"5", "x":2, "y":3.25}, {"label":"6", "x":3, "y":3.25}, {"label":"Caps Lock", "x":4.5, "y":3.25, "w":1.75}, {"label":"A", "x":6.25, "y":3.25}, {"label":"S", "x":7.25, "y":3.25}, {"label":"D", "x":8.25, "y":3.25}, {"label":"F", "x":9.25, "y":3.25}, {"label":"G", "x":10.25, "y":3.25}, {"label":"H", "x":11.25, "y":3.25}, {"label":"J", "x":12.25, "y":3.25}, {"label":"K", "x":13.25, "y":3.25}, {"label":"L", "x":14.25, "y":3.25}, {"label":":", "x":15.25, "y":3.25}, {"label":"\"", "x":16.25, "y":3.25}, {"label":"Enter", "x":17.25, "y":3.25, "w":2.25}, {"label":"4", "x":20, "y":3.25}, {"label":"5", "x":21, "y":3.25}, {"label":"6", "x":22, "y":3.25}, {"label":"Enter", "x":0, "y":4.25, "h":2}, {"label":"1", "x":1, "y":4.25}, {"label":"2", "x":2, "y":4.25}, {"label":"3", "x":3, "y":4.25}, {"label":"\u2191", "x":4.25, "y":4.5}, {"label":"Shift", "x":5.5, "y":4.25, "w":1.25}, {"label":"Z", "x":6.75, "y":4.25}, {"label":"X", "x":7.75, "y":4.25}, {"label":"C", "x":8.75, "y":4.25}, {"label":"V", "x":9.75, "y":4.25}, {"label":"B", "x":10.75, "y":4.25}, {"label":"N", "x":11.75, "y":4.25}, {"label":"M", "x":12.75, "y":4.25}, {"label":"<", "x":13.75, "y":4.25}, {"label":">", "x":14.75, "y":4.25}, {"label":"?", "x":15.75, "y":4.25}, {"label":"Shift", "x":16.75, "y":4.25, "w":1.75}, {"label":"\u2191", "x":18.75, "y":4.5}, {"label":"1", "x":20, "y":4.25}, {"label":"2", "x":21, "y":4.25}, {"label":"3", "x":22, "y":4.25}, {"label":"Enter", "x":23, "y":4.25, "h":2}, {"label":"0", "x":1, "y":5.25}, {"label":".", "x":2, "y":5.25}, {"label":"\u2190", "x":3.25, "y":5.5}, {"label":"\u2193", "x":4.25, "y":5.5}, {"label":"\u2192", "x":5.25, "y":5.5}, {"label":"Ctrl", "x":6.5, "y":5.25}, {"label":"Win", "x":7.5, "y":5.25}, {"label":"Alt", "x":8.5, "y":5.25}, {"label":"7u", "x":8.5, "y":5.25, "w":7}, {"label":"1u", "x":9.5, "y":5.25}, {"label":"4u", "x":9.5, "y":5.25, "w":4}, {"label":"1u", "x":10.5, "y":5.25}, {"label":"1u", "x":11.5, "y":5.25}, {"label":"1u", "x":12.5, "y":5.25}, {"label":"Alt", "x":13.5, "y":5.25}, {"label":"Win", "x":14.5, "y":5.25}, {"label":"Menu", "x":15.5, "y":5.25}, {"label":"Ctrl", "x":16.5, "y":5.25}, {"label":"\u2190", "x":17.75, "y":5.5}, {"label":"\u2193", "x":18.75, "y":5.5}, {"label":"\u2192", "x":19.75, "y":5.5}, {"label":"0", "x":21, "y":5.25}, {"label":".", "x":22, "y":5.25}]
+        }
+    }
+}