Fix Audio Clicky sub-feature (#2784)

* Fix Audio Clicky feature

* Add to features

.gitignore

@@ -43,6 +43,7 @@ doxygen/
 .project
 .settings/
 .idea
+*.iml
 .browse.VC.db*
 *.stackdump
 util/Win_Check_Output.txt

common_features.mk

@@ -34,6 +34,7 @@ ifeq ($(strip $(AUDIO_ENABLE)), yes)
     OPT_DEFS += -DAUDIO_ENABLE
     MUSIC_ENABLE := 1
     SRC += $(QUANTUM_DIR)/process_keycode/process_audio.c
+    SRC += $(QUANTUM_DIR)/process_keycode/process_clicky.c
     ifeq ($(PLATFORM),AVR)
         SRC += $(QUANTUM_DIR)/audio/audio.c
     else

docs/config_options.md

@@ -61,10 +61,18 @@ This is a C header file that is one of the first things included, and will persi
   * COL2ROW or ROW2COL - how your matrix is configured. COL2ROW means the black mark on your diode is facing to the rows, and between the switch and the rows.
 * `#define AUDIO_VOICES`
   * turns on the alternate audio voices (to cycle through)
+* `#define C4_AUDIO`
+  * enables audio on pin C4
+* `#define C5_AUDIO`
+  * enables audio on pin C5
 * `#define C6_AUDIO`
   * enables audio on pin C6
 * `#define B5_AUDIO`
-  * enables audio on pin B5 (duophony is enable if both are enabled)
+  * enables audio on pin B5 (duophony is enables if one of B[5-7]_AUDIO is enabled along with one of C[4-6]_AUDIO)
+* `#define B6_AUDIO`
+  * enables audio on pin B6 (duophony is enables if one of B[5-7]_AUDIO is enabled along with one of C[4-6]_AUDIO)
+* `#define B7_AUDIO`
+  * enables audio on pin B7 (duophony is enables if one of B[5-7]_AUDIO is enabled along with one of C[4-6]_AUDIO)
 * `#define BACKLIGHT_PIN B7`
   * pin of the backlight - B5, B6, B7 use PWM, others use softPWM
 * `#define BACKLIGHT_LEVELS 3`
@@ -108,7 +116,7 @@ If you define these options you will enable the associated feature, which may in
 * `#define FORCE_NKRO`
   * NKRO by default requires to be turned on, this forces it on during keyboard startup regardless of EEPROM setting. NKRO can still be turned off but will be turned on again if the keyboard reboots.
 * `#define PREVENT_STUCK_MODIFIERS`
-  * when switching layers, this will release all mods
+  * stores the layer a key press came from so the same layer is used when the key is released, regardless of which layers are enabled
 
 ## Behaviors That Can Be Configured
 

docs/feature_advanced_keycodes.md

@@ -19,14 +19,15 @@ Currently, the keycodes able to used with these functions are limited to the [Ba
 
 # Switching and Toggling Layers
 
-These functions allow you to activate layers in various ways.
+These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers)
 
-* `MO(layer)` - momentary switch to *layer*. As soon as you let go of the key, the layer is deactivated and you pop back out to the previous layer.
-* `LT(layer, kc)` - momentary switch to *layer* when held, and *kc* when tapped.
-* `TG(layer)` - toggles a layer on or off.
-* `TO(layer)` - Goes to a layer. This code is special, because it lets you go either up or down the stack -- just goes directly to the layer you want. So while other codes only let you go _up_ the stack (from layer 0 to layer 3, for example), `TO(2)` is going to get you to layer 2, no matter where you activate it from -- even if you're currently on layer 5. This gets activated on keydown (as soon as the key is pressed).
-* `TT(layer)` - Layer Tap-Toggle. If you hold the key down, the layer becomes active, and then deactivates when you let go. And if you repeatedly tap it, the layer simply becomes active (toggles on). It needs 5 taps by default, but you can set it by defining `TAPPING_TOGGLE`, for example, `#define TAPPING_TOGGLE 2` for just two taps.
-* `LM(layer, mod)` - Momentary switch to *layer* (like MO), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
+* `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
+* `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
+* `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
+* `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped.
+* `TG(layer)` - toggles *layer*, activating it if it's inactive and vice versa
+* `TO(layer)` - activates *layer* and de-activates all other layers (except your default layer). This function is special, because instead of just adding/removing one layer to your active layer stack, it will completely replace your current active layers, uniquely allowing you to replace higher layers with a lower one. This is activated on keydown (as soon as the key is pressed).
+* `TT(layer)` - Layer Tap-Toggle. If you hold the key down, *layer* is activated, and then is de-activated when you let go (like `MO`). If you repeatedly tap it, the layer will be toggled on or off (like `TG`). It needs 5 taps by default, but you can change this by defining `TAPPING_TOGGLE` -- for example, `#define TAPPING_TOGGLE 2` to toggle on just two taps.
 
 # Working with Layers
 
@@ -36,9 +37,9 @@ Care must be taken when switching layers, it's possible to lock yourself into a
 
 If you are just getting started with QMK you will want to keep everything simple. Follow these guidelines when setting up your layers:
 
-* Setup layer 0 as your "base" layer. This is your normal typing layer, and could be whatever layout you want (qwerty, dvorak, colemak, etc.)
+* Setup layer 0 as your default, "base" layer. This is your normal typing layer, and could be whatever layout you want (qwerty, dvorak, colemak, etc.). It's important to set this as the lowest layer since it will typically have most or all of the keyboard's keys defined, so would block other layers from having any effect if it were above them (i.e., had a higher layer number). 
 * Arrange your layers in a "tree" layout, with layer 0 as the root. Do not try to enter the same layer from more than one other layer.
-* Never try to stack a higher numbered layer on top of a lower numbered layer. Doing so is tricky and error prone.
+* In a layer's keymap, only reference higher-numbered layers. Because layers are processed from the highest-numbered (topmost) active layer down, modifying the state of lower layers can be tricky and error-prone.
 
 ### Intermediate Users
 

docs/feature_audio.md

@@ -1,6 +1,17 @@
 # Audio
 
-Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any AVR keyboard that allows access to the C6 or B5 port (`#define C6_AUDIO` and/or `#define B5_AUDIO`), you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes.
+Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any AVR keyboard that allows access to certain PWM-capable pins, you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes.
+
+Up to two simultaneous audio voices are supported, one driven by timer 1 and another driven by timer 3.  The following pins can be defined as audio outputs in config.h:
+Timer 1:
+`#define B5_AUDIO`
+`#define B6_AUDIO`
+`#define B7_AUDIO`
+
+Timer 3:
+`#define C4_AUDIO`
+`#define C5_AUDIO`
+`#define C6_AUDIO`
 
 If you add `AUDIO_ENABLE = yes` to your `rules.mk`, there's a couple different sounds that will automatically be enabled without any other configuration:
 
@@ -86,6 +97,36 @@ You can completely disable Music Mode as well. This is useful, if you're pressed
 
     #define NO_MUSIC_MODE
 
+## Faux Click
+
+This adds a click sound each time you hit a button, to simulate click sounds from the keyboard. And the sounds are slightly different for each keypress, so it doesn't sound like a single long note, if you type rapidly. 
+
+* `CK_TOGG` - Toggles the status (will play sound if enabled)
+* `CK_RST` - Resets the frequency to the default state 
+* `CK_UP` - Increases the frequency of the clicks
+* `CK_DOWN` - Decreases the frequency of the clicks
+
+The feature is disabled by default, to save space.  To enable it, add this to your `config.h`:
+
+    #define AUDIO_CLICKY
+
+Additionally, even when enabled, the feature is not enabled by default, so you would need to turn it on first.  And since we don't use EEPROM to store the setting (yet), you can default this to on by adding this to your `config.h`:
+
+    #define AUDIO_CLICKY_ON
+
+You can configure the default, min and max frequencies, the stepping and built in randomness by defining these values: 
+
+| Option | Default Value | Description |
+|--------|---------------|-------------|
+| `AUDIO_CLICKY_FREQ_DEFAULT` | 440.0f | Sets the default/starting audio frequency for the clicky sounds. |
+| `AUDIO_CLICKY_FREQ_MIN` | 65.0f | Sets the lowest frequency (under 60f are a bit buggy). |
+| `AUDIO_CLICKY_FREQ_MAX` | 1500.0f | Sets the the highest frequency. Too high may result in coworkers attacking you. |
+| `AUDIO_CLICKY_FREQ_FACTOR` | 1.18921f| Sets the stepping of UP/DOWN key codes. |
+| `AUDIO_CLICKY_FREQ_RANDOMNESS`     |  0.05f |  Sets a factor of randomness for the clicks, Setting this to `0f` will make each click identical. | 
+
+
+
+
 ## MIDI Functionality
 
 This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile.

docs/feature_bootmagic.md

@@ -6,7 +6,7 @@ Bootmagic is a system for configuring your keyboard while it initializes. To tri
 
 Bootmagic Keycodes allow you to access the Bootmagic functionality after your keyboard has initialized. To use Bootmagic Keycodes you assign keycodes starting with `MAGIC_`, much in the same way you define any other key.
 
-Command is a feature that allows you to control different aspects of your keyboard. Command used to be called Magic. Command is typically accessed by holding Left and Right Shift at the same time, although that can be customized. While it shares some functionality with Bootmagic it also allows you to access functionality that Bootmagic does not. For more information see the (Command)[feature_command.md) documentation page.
+Command is a feature that allows you to control different aspects of your keyboard. Command used to be called Magic. Command is typically accessed by holding Left and Right Shift at the same time, although that can be customized. While it shares some functionality with Bootmagic it also allows you to access functionality that Bootmagic does not. For more information see the [Command](feature_command.md) documentation page.
 
 ## Enabling Bootmagic
 

docs/feature_stenography.md

@@ -56,6 +56,29 @@ On the display tab click 'Open stroke display'. With Plover disabled you should
 * [Steno Jig](https://joshuagrams.github.io/steno-jig/)
 * More resources at the Plover [Learning Stenography](https://github.com/openstenoproject/plover/wiki/Learning-Stenography) wiki
 
+## Interfacing with the code
+
+The steno code has three interceptible hooks. If you define these functions, they will be called at certain points in processing; if they return true, processing continues, otherwise it's assumed you handled things.
+
+```C
+bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]);
+```
+
+This function is called when a chord is about to be sent. Mode will be one of `STENO_MODE_BOLT` or `STENO_MODE_GEMINI`. This represents the actual chord that would be sent via whichever protocol. You can modify the chord provided to alter what gets sent. Remember to return true if you want the regular sending process to happen.
+
+```C
+bool process_steno_user(uint16_t keycode, keyrecord_t *record) { return true; }
+```
+
+This function is called when a keypress has come in, before it is processed. The keycode should be one of `QK_STENO_BOLT`, `QK_STENO_GEMINI`, or one of the `STN_*` key values.
+
+```C
+bool postprocess_steno_user(uint16_t keycode, keyrecord_t *record, steno_mode_t mode, uint8_t chord[6], int8_t pressed);
+```
+
+This function is called after a key has been processed, but before any decision about whether or not to send a chord. If `IS_PRESSED(record->event)` is false, and `pressed` is 0 or 1, the chord will be sent shortly, but has not yet been sent. This is where to put hooks for things like, say, live displays of steno chords or keys.
+
+
 ## Keycode Reference
 
 As defined in `keymap_steno.h`.
@@ -106,3 +129,4 @@ As defined in `keymap_steno.h`.
 |`STN_RES1`||(GeminiPR only)|
 |`STN_RES2`||(GeminiPR only)|
 |`STN_PWR`||(GeminiPR only)|
+

docs/feature_tap_dance.md

@@ -22,7 +22,7 @@ This array specifies what actions shall be taken when a tap-dance key is in acti
 * `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action.
 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function on when the dance action finishes (like the previous option), and the last function when the tap dance action resets.
 
-The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise.
+The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise.
 
 And that's the bulk of it!
 

docs/flashing.md

@@ -20,7 +20,7 @@ Compatible flashers:
 
 * [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (recommended GUI)
 * [dfu-programmer](https://github.com/dfu-programmer/dfu-programmer) / `:dfu` in QMK (recommended command line)
-* [Atmel's Flip](http://www.atmel.com/tools/flip.aspx) (not recommended)
+* [Atmel's Flip](http://www.microchip.com/developmenttools/productdetails.aspx?partno=flip) (not recommended)
 
 Flashing sequence:
 

docs/hardware_keyboard_guidelines.md

@@ -45,17 +45,8 @@ The `info.json` file is a JSON formatted dictionary with the following keys avai
 * `keyboard_name`
   * A free-form text string describing the keyboard.
   * Example: `Clueboard 66%`
-* `manufacturer`
-  * A free-form text string naming the manufacturer.
-  * Example: `Clueboard`
-* `identifier`
-  * The Vendor, Product, and Revision ID's joined by a :
-  * Example: `c1ed:2370:0001`
 * `url`
   * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
-* `processor`
-  * The MCU or CPU this keyboard uses.
-  * Example: `atmega32u4` or `stm32f303`
 * `bootloader`
   * What bootloader this keyboard uses. Available options:
     * `atmel-dfu`

keyboards/1up60rgb/info.json

@@ -1,11 +1,7 @@
 {
   "keyboard_name": "1up60rgb",
-  "manufacturer": "1UP Keyboards",
-  "identifier": "",
   "url": "",
   "maintainer": "qmk",
-  "processor": "atmega32u4",
-  "bootloader": "atmel-dfu",
   "width": 15,
   "height": 5,
   "layouts": {

keyboards/alf_x2/alf_x2.c

@@ -0,0 +1 @@
+#include "alf_x2.h"

keyboards/alf_x2/alf_x2.h

@@ -0,0 +1,22 @@
+#ifndef ALF_X2_H
+#define ALF_X2_H
+
+#include "quantum.h"
+
+// K404 and K408 are the microswitches at the top of the PCB
+
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
+	K400, K401,       K403, K404,       K406,       K408,       K410, K411, K412, K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314 }, \
+	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }  \
+}
+
+#endif

keyboards/alf_x2/config.h

@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    ALF
+#define PRODUCT         X2
+#define DESCRIPTION     ALF X2 60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 4
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/alf_x2/keymaps/default/keymap.c

@@ -0,0 +1,40 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  LAYOUT(
+    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, 
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+    KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, KC_NO, 
+    KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_SPC, KC_VOLD, KC_RALT, MO(1), KC_NO, KC_APP, KC_RCTL),
+
+  LAYOUT(
+    KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, RESET, 
+    KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_DOWN, KC_TRNS, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_TRNS, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+  } else {
+    DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+  }
+}

keyboards/alf_x2/keymaps/hhkb_60/keymap.c

@@ -0,0 +1,40 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  LAYOUT(
+    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, 
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, 
+    KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+    KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, MO(1), 
+    KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_SPC, KC_VOLD, KC_RALT, KC_RGUI, KC_NO, KC_APP, KC_RCTL),
+
+  LAYOUT(
+    KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, 
+    KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, RESET, 
+    KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_DOWN, KC_TRNS, KC_TRNS, 
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_TRNS, KC_MPRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+  } else {
+    DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+  }
+}

keyboards/alf_x2/readme.md

@@ -0,0 +1,15 @@
+# ALF X2
+
+![alf_x2](https://cdn.shopify.com/s/files/1/1674/0405/products/1_088c2862-1f68-4fdd-a346-965208c3a3de_1024x1024.png?v=1511296076)
+
+A customizable 60% keyboard.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: ALF X2 60%  
+Hardware Availability: [zfrontier](https://en.zfrontier.com/products/group-buy-alf-x2-60)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make alf_x2:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/alf_x2/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/alpha/alpha.c

@@ -0,0 +1 @@
+#include "alpha.h"

keyboards/alpha/alpha.h

@@ -0,0 +1,16 @@
+#ifndef KB_H
+#define KB_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, \
+	K200, K201, K202, K203,       K205,       K207, K208, K209  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109 }, \
+	{ K200,  K201,  K202,  K203,  KC_NO, K205,  KC_NO, K207,  K208,  K209 }  \
+}
+
+#endif

keyboards/alpha/config.h

@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    PyroL
+#define PRODUCT         alpha
+#define DESCRIPTION     28-key keyboard by PyroL
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 10
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D4, B4, B5 }
+#define MATRIX_COL_PINS { D7, E6, C6, B6, B2, B3, B1, F7, F6, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN F4
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 5
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/alpha/keymaps/default/keymap.c

@@ -0,0 +1,76 @@
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT(
+		KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, 
+		KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, TO(1), 
+		KC_Z, KC_X, KC_C, KC_V, MT(MOD_LSFT, KC_SPC), KC_B, KC_N, KC_M),
+
+	LAYOUT(
+		KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, 
+		KC_BSPC, KC_ESC, KC_TAB, KC_SCLN, KC_QUOT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, TO(2), 
+		KC_LCTL, KC_LGUI, KC_LALT, TO(0), MT(MOD_LSFT, KC_ENT), KC_COMM, KC_DOT, KC_SLSH),
+
+	LAYOUT(
+		KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, 
+		KC_LSFT, KC_F11, KC_F12, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, TO(3), 
+		RGB_VAI, RGB_VAD, RGB_HUI, TO(0), RGB_MOD, KC_MPLY, KC_VOLD, KC_VOLU),
+
+	LAYOUT(
+		RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, M(0), KC_NO, KC_NO, KC_NO),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {	
+	if (record->event.pressed) {
+		switch (keycode) {
+			case 0:
+				SEND_STRING("I'm so sorry... -PyroL");
+				return false;
+		}
+	}
+	return true;
+};
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+		
+	} else {
+		
+	}
+
+}

keyboards/alpha/readme.md

@@ -0,0 +1,14 @@
+# Alpha
+
+![Alpha](https://imgur.com/a/TouJ5rH)
+
+A 28-key, semi-ortho keyboard designed by PyroL!
+Keyboard Maintainer: [PyroL](https://www.github.com/PyrooL) 
+Hardware Supported: Alpha PCB, Pro Micro 
+Hardware Availability: on a group-buy basis for now. Pro Micros can be found on Ali or from the official Sparkfun website.
+
+Make example for Alpha (after setting up your build environment):
+
+    make alpha:default
+
+    See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/faq/build-compile-qmk) for more information.

keyboards/alpha/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+BOOTLOADER = caterina
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/alps64/alps64.h

@@ -21,7 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Alps64 keymap definition macro */
 
-#define KEYMAP( \
+#define LAYOUT_all( \
     K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
     K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
     K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
@@ -38,7 +38,75 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     { K70, K71, K72, K73, K74, K75, K76, K77 } \
 }
 
-#define KC_KEYMAP( \
+#define LAYOUT_iso( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17,      K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21,  \
+    K30, K40, K50,           K60,                     K70, K00,      K20  \
+) { \
+    { K00,   K01, K02,   K03, K04, K05, K06,   K07 }, \
+    { KC_NO, K11, K12,   K13, K14, K15, K16,   K17 }, \
+    { K20,   K21, KC_NO, K23, K24, K25, KC_NO, K27 }, \
+    { K30,   K31, K32,   K33, K34, K35, K36,   K37 }, \
+    { K40,   K41, K42,   K43, K44, K45, K46,   K47 }, \
+    { K50,   K51, K52,   K53, K54, K55, K56,   K57 }, \
+    { K60,   K61, K62,   K63, K64, K65, K66,   K67 }, \
+    { K70,   K71, K72,   K73, K74, K75, K76,   K77 } \
+}
+
+#define LAYOUT_standard_60( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17,      K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31,      K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21,  \
+    K30, K40, K50,           K60,                     K70, K00, K10, K20  \
+) { \
+    { K00, K01,   K02,   K03, K04, K05, K06,   K07 }, \
+    { K10, K11,   K12,   K13, K14, K15, K16,   K17 }, \
+    { K20, K21,   KC_NO, K23, K24, K25, KC_NO, K27 }, \
+    { K30, K31,   K32,   K33, K34, K35, K36,   K37 }, \
+    { K40, KC_NO, K42,   K43, K44, K45, K46,   K47 }, \
+    { K50, K51,   K52,   K53, K54, K55, K56,   K57 }, \
+    { K60, K61,   K62,   K63, K64, K65, K66,   K67 }, \
+    { K70, K71,   K72,   K73, K74, K75, K76,   K77 } \
+}
+
+#define LAYOUT_infinity( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31,      K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \
+    K30, K40, K50,           K60,                     K70, K00, K10, K20  \
+) { \
+    { K00, K01,   K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11,   K12, K13, K14, K15, K16, K17 }, \
+    { K20, K21,   K22, K23, K24, K25, K26, K27 }, \
+    { K30, K31,   K32, K33, K34, K35, K36, K37 }, \
+    { K40, KC_NO, K42, K43, K44, K45, K46, K47 }, \
+    { K50, K51,   K52, K53, K54, K55, K56, K57 }, \
+    { K60, K61,   K62, K63, K64, K65, K66, K67 }, \
+    { K70, K71,   K72, K73, K74, K75, K76, K77 } \
+}
+
+#define LAYOUT_aek_103( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17,     K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31,      K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21,  \
+    K30, K40, K50,           K60,                     K70, K00,      K20  \
+) { \
+    { K00,   K01,   K02,   K03, K04, K05, K06,   K07 }, \
+    { KC_NO, K11,   K12,   K13, K14, K15, K16,   K17 }, \
+    { K20,   K21,   KC_NO, K23, K24, K25, KC_NO, K27 }, \
+    { K30,   K31,   K32,   K33, K34, K35, K36,   K37 }, \
+    { K40,   KC_NO, K42,   K43, K44, K45, K46,   K47 }, \
+    { K50,   K51,   K52,   K53, K54, K55, K56,   K57 }, \
+    { K60,   K61,   K62,   K63, K64, K65, K66,   K67 }, \
+    { K70,   K71,   K72,   K73, K74, K75, K76,   K77 } \
+}
+
+#define LAYOUT_kc( \
     K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
     K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
     K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \

keyboards/alps64/info.json

@@ -0,0 +1,28 @@
+{
+  "keyboard_name": "alps64",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+      "LAYOUT_all": {
+        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      },
+
+      "LAYOUT_standard_60": {
+          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      },
+
+      "LAYOUT_infinity": {
+        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+      },
+
+      "LAYOUT_aek_103": {
+        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.5}, {"x":4.25, "y":4, "w":6.5}, {"label":"Alt", "x":10.75, "y":4, "w":1.5}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+      },
+
+      "LAYOUT_iso": {
+        "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"AltGr", "x":11, "y":4, "w":1.5}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+      }
+  }
+}

keyboards/alps64/keymaps/default/keymap.c

@@ -2,7 +2,7 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: qwerty */
-    KC_KEYMAP( \
+    LAYOUT_kc( \
         GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, NUHS, BSPC, \
         TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
         CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,ENT,  \

keyboards/amj40/keymaps/jetpacktuxedo/keymap.c

@@ -0,0 +1,43 @@
+#include "amj40.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  // Default Layer
+  [0] = KEYMAP( \
+      KC_GESC,       KC_Q,    KC_W,   KC_E, KC_R, KC_T,    KC_Y, KC_U,    KC_I,    KC_O,   KC_P,   KC_BSPC,\
+      LT(2, KC_TAB), KC_A,    KC_S,   KC_D, KC_F, KC_G,    KC_H, KC_J,    KC_K,    KC_L,   LT(2, KC_ENT),\
+      KC_LSFT,       KC_Z,    KC_X,   KC_C, KC_V, KC_B,    KC_N, KC_M,    KC_COMM, KC_DOT, MT(MOD_RSFT, KC_SLSH),\
+      KC_LCTL,       KC_LGUI, KC_LALT,      LT(1, KC_SPC), LT(1, KC_SPC), KC_RALT, MO(3),  KC_RCTL \
+      ),
+
+  // Number Layer
+  [1] = KEYMAP( \
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+      KC_TRNS, KC_MINS, KC_EQL,  KC_SCLN, KC_QUOT, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, MT(MOD_RSFT, KC_BSLS), \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\
+      ),
+
+  // Shifted Layer
+  [2] = KEYMAP( \
+      KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,\
+      KC_TRNS, KC_UNDS, KC_PLUS, KC_COLN, KC_DQUO, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_TRNS, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_RCBR, KC_PIPE, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\
+      ),
+
+  // Fkey Layer
+  [3] = KEYMAP( \
+      KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10, RESET,\
+      KC_TRNS, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+      KC_TRNS, TG(4),   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\
+      ),
+
+  // Gaming Layer
+  [4] = KEYMAP( \
+      KC_ESC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_U, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS,\
+      KC_TAB,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,\
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\
+      ),
+};

keyboards/amj40/keymaps/jetpacktuxedo/readme.md

@@ -0,0 +1,55 @@
+Jetpacktuxedo's AMJ40 layout
+=====================
+
+This is based heavily on my minivan layout, with most difference stemming from the different widths between the minivan and the AMJ40. ![Image of my specific layout](https://i.imgur.com/B9XraJY.jpg)
+
+## Base Layer (0)
+
+The base layer is pretty simple, straight qwerty layout where available. Both spacebars go to layer 1 when held. `tab` is `tab` when pressed and `fn2` when held, `enter` is the same. `GESC` is `esc` when used alone, but `~` when shifted. `/` is `/` when tapped but `rshift` when held.
+```
+|GESC| Q  | W  | E  | R  | T  | Y  | U  | I  | O  | P  |BSPC|
+| TAB | A  | S  | D  | F  | G  | H  | J  | K  | L  | ENTER  |
+|LSHIFT | Z  | X  | C  | V  | B  | N  | M  | ,  | .  |  /   |
+|LCTRL|LWIN|LALT |  SPACE   |    SPACE    |RALT |FN 3|RCTRL |
+```
+
+## Number Layer (1)
+
+Numbers are set up just like on my minivan layout, but symbols are a bit different because the AMJ40 is one key narrower than the minivan and also lacks dedicated arrows. Decided to go with `hjkl` arrows, which takes some getting used to. `;` is on a layer now because of the narrowness I mentioned before, and it (along with `-`, `=`, and `'`) moves to the right hand to leave room for the `hjkl` arrows. `delete` on `backspace`, `[` and `]` on `<` and `>`, and `\` on `/` are all stolen straight from my minivan layout.
+```
+| `  | 1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | 0  |DEL |
+|     | -  | =  | ;  | '  |    | ←  | ↓  | ↑  | →  |        |
+|       |    |    |    |    |    |    |    | [  | ]  |  \   |
+|     |    |     |          |             |     |    |      |
+```
+
+## Shifted Layer (2)
+
+I don't want to be using two key combos constantly, so I also added this symbol layer that is basically shift+numeric layer. Also has nav keys on top of where arrows sit on the previous layer
+```
+| ~  | !  | @  | #  | $  | %  | ^  | &  | *  | (  | )  |DEL |
+|     | _  | +  | :  | "  |    |HOME|PGDN|PGUP|END |        |
+|       |    |    |    |    |    |    |    | {  | }  |  |   |
+|     |    |     |          |             |     |    |      |
+```
+
+## Fkey Layer (3)
+
+Honestly, I use this more for jumping to my gaming layer and for reset than I use it for Fkeys. Lol. Hitting the left windows key while in this layer locks the gaming layer listed below
+```
+|    | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 |F10 |RSET|
+|     |F11 |F12 |    |    |    |    |    |    |    |        |
+|       |    |    |    |    |    |    |    |    |    |      |
+|     |FN 4|     |          |             |     |    |      |
+```
+
+## "Gaming" Layer (4)
+
+Based on the "gaming" layer on my minivan that I mostly just use for mouse keys. To toggle this back off you hit the right windows key (to go to layer 3) and then the left windows key again.
+```
+|ESC |    |    |    |    |    |MWUP|MLCK|M UP|MRCK|    |    |
+| TAB |    |    |    |    |    |MWDN|M L |M DN|M R |        |
+|       |    |    |    |    |    |    |    |    |    |      |
+|     |    |     |  SPACE   |             |     |    |      |
+```
+

keyboards/amj40/keymaps/jetpacktuxedo/rules.mk

@@ -0,0 +1,27 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = no  # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. It uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif