Use QMK_KEYBOARD_H instead of the mykeyboard.h (#2780)

* Re-add NO_SECRETS option

* Add Thumb Clusters defines for default layout

* Minor tweaks

* More Minor tweaks

* Revert Orthodox layers and move function keys around

* Fix keymap so it will compile under the Infinity

Since I haven't added 'pretty' layouts to it yet

* Cleanup of userspace

* Cleanup keymaps

* OMG fix Workman

* Move mods layer key around

* Reduce debounce in Ergodox EZ

* Fix Infinity layers

* Add list of pins used by Ergdox EZ for easy reference

* Revert "Reduce debounce in Ergodox EZ"

This reverts commit 8a3db2673b419ef8032c40a6d29156cef632f9cd.

* Add Clicky toggle to Orthodox

* Fix Audio Clicky keycode

* Enable Faux Clicky by default

* Add Unicode stuff

.gitignore

@@ -43,6 +43,7 @@ doxygen/
 .project
 .settings/
 .idea
+*.iml
 .browse.VC.db*
 *.stackdump
 util/Win_Check_Output.txt

docs/config_options.md

@@ -116,7 +116,7 @@ If you define these options you will enable the associated feature, which may in
 * `#define FORCE_NKRO`
   * NKRO by default requires to be turned on, this forces it on during keyboard startup regardless of EEPROM setting. NKRO can still be turned off but will be turned on again if the keyboard reboots.
 * `#define PREVENT_STUCK_MODIFIERS`
-  * when switching layers, this will release all mods
+  * stores the layer a key press came from so the same layer is used when the key is released, regardless of which layers are enabled
 
 ## Behaviors That Can Be Configured
 

docs/feature_audio.md

@@ -97,6 +97,36 @@ You can completely disable Music Mode as well. This is useful, if you're pressed
 
     #define NO_MUSIC_MODE
 
+## Faux Click
+
+This adds a click sound each time you hit a button, to simulate click sounds from the keyboard. And the sounds are slightly different for each keypress, so it doesn't sound like a single long note, if you type rapidly. 
+
+* `CK_TOGG` - Toggles the status (will play sound if enabled)
+* `CK_RST` - Resets the frequency to the default state 
+* `CK_UP` - Increases the frequency of the clicks
+* `CK_DOWN` - Decreases the frequency of the clicks
+
+The feature is disabled by default, to save space.  To enable it, add this to your `config.h`:
+
+    #define AUDIO_CLICKY
+
+Additionally, even when enabled, the feature is not enabled by default, so you would need to turn it on first.  And since we don't use EEPROM to store the setting (yet), you can default this to on by adding this to your `config.h`:
+
+    #define AUDIO_CLICKY_ON
+
+You can configure the default, min and max frequencies, the stepping and built in randomness by defining these values: 
+
+| Option | Default Value | Description |
+|--------|---------------|-------------|
+| `AUDIO_CLICKY_FREQ_DEFAULT` | 440.0f | Sets the default/starting audio frequency for the clicky sounds. |
+| `AUDIO_CLICKY_FREQ_MIN` | 65.0f | Sets the lowest frequency (under 60f are a bit buggy). |
+| `AUDIO_CLICKY_FREQ_MAX` | 1500.0f | Sets the the highest frequency. Too high may result in coworkers attacking you. |
+| `AUDIO_CLICKY_FREQ_FACTOR` | 1.18921f| Sets the stepping of UP/DOWN key codes. |
+| `AUDIO_CLICKY_FREQ_RANDOMNESS`     |  0.05f |  Sets a factor of randomness for the clicks, Setting this to `0f` will make each click identical. | 
+
+
+
+
 ## MIDI Functionality
 
 This is still a WIP, but check out `quantum/keymap_midi.c` to see what's happening. Enable from the Makefile.

docs/feature_bootmagic.md

@@ -6,7 +6,7 @@ Bootmagic is a system for configuring your keyboard while it initializes. To tri
 
 Bootmagic Keycodes allow you to access the Bootmagic functionality after your keyboard has initialized. To use Bootmagic Keycodes you assign keycodes starting with `MAGIC_`, much in the same way you define any other key.
 
-Command is a feature that allows you to control different aspects of your keyboard. Command used to be called Magic. Command is typically accessed by holding Left and Right Shift at the same time, although that can be customized. While it shares some functionality with Bootmagic it also allows you to access functionality that Bootmagic does not. For more information see the (Command)[feature_command.md) documentation page.
+Command is a feature that allows you to control different aspects of your keyboard. Command used to be called Magic. Command is typically accessed by holding Left and Right Shift at the same time, although that can be customized. While it shares some functionality with Bootmagic it also allows you to access functionality that Bootmagic does not. For more information see the [Command](feature_command.md) documentation page.
 
 ## Enabling Bootmagic
 

docs/flashing.md

@@ -20,7 +20,7 @@ Compatible flashers:
 
 * [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (recommended GUI)
 * [dfu-programmer](https://github.com/dfu-programmer/dfu-programmer) / `:dfu` in QMK (recommended command line)
-* [Atmel's Flip](http://www.atmel.com/tools/flip.aspx) (not recommended)
+* [Atmel's Flip](http://www.microchip.com/developmenttools/productdetails.aspx?partno=flip) (not recommended)
 
 Flashing sequence:
 

keyboards/alpha/alpha.c

@@ -0,0 +1 @@
+#include "alpha.h"

keyboards/alpha/alpha.h

@@ -0,0 +1,16 @@
+#ifndef KB_H
+#define KB_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, \
+	K200, K201, K202, K203,       K205,       K207, K208, K209  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109 }, \
+	{ K200,  K201,  K202,  K203,  KC_NO, K205,  KC_NO, K207,  K208,  K209 }  \
+}
+
+#endif

keyboards/alpha/config.h

@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    PyroL
+#define PRODUCT         alpha
+#define DESCRIPTION     28-key keyboard by PyroL
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 10
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D4, B4, B5 }
+#define MATRIX_COL_PINS { D7, E6, C6, B6, B2, B3, B1, F7, F6, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN F4
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 5
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/alpha/keymaps/default/keymap.c

@@ -0,0 +1,76 @@
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT(
+		KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, 
+		KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, TO(1), 
+		KC_Z, KC_X, KC_C, KC_V, MT(MOD_LSFT, KC_SPC), KC_B, KC_N, KC_M),
+
+	LAYOUT(
+		KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, 
+		KC_BSPC, KC_ESC, KC_TAB, KC_SCLN, KC_QUOT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, TO(2), 
+		KC_LCTL, KC_LGUI, KC_LALT, TO(0), MT(MOD_LSFT, KC_ENT), KC_COMM, KC_DOT, KC_SLSH),
+
+	LAYOUT(
+		KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, 
+		KC_LSFT, KC_F11, KC_F12, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, TO(3), 
+		RGB_VAI, RGB_VAD, RGB_HUI, TO(0), RGB_MOD, KC_MPLY, KC_VOLD, KC_VOLU),
+
+	LAYOUT(
+		RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
+		KC_NO, KC_NO, KC_NO, KC_NO, M(0), KC_NO, KC_NO, KC_NO),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {	
+	if (record->event.pressed) {
+		switch (keycode) {
+			case 0:
+				SEND_STRING("I'm so sorry... -PyroL");
+				return false;
+		}
+	}
+	return true;
+};
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+		
+	} else {
+		
+	}
+
+}

keyboards/alpha/readme.md

@@ -0,0 +1,14 @@
+# Alpha
+
+![Alpha](https://imgur.com/a/TouJ5rH)
+
+A 28-key, semi-ortho keyboard designed by PyroL!
+Keyboard Maintainer: [PyroL](https://www.github.com/PyrooL) 
+Hardware Supported: Alpha PCB, Pro Micro 
+Hardware Availability: on a group-buy basis for now. Pro Micros can be found on Ali or from the official Sparkfun website.
+
+Make example for Alpha (after setting up your build environment):
+
+    make alpha:default
+
+    See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/faq/build-compile-qmk) for more information.

keyboards/alpha/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+BOOTLOADER = caterina
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/alps64/alps64.h

@@ -21,7 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Alps64 keymap definition macro */
 
-#define KEYMAP( \
+#define LAYOUT_all( \
     K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
     K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
     K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
@@ -38,7 +38,75 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     { K70, K71, K72, K73, K74, K75, K76, K77 } \
 }
 
-#define KC_KEYMAP( \
+#define LAYOUT_iso( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17,      K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21,  \
+    K30, K40, K50,           K60,                     K70, K00,      K20  \
+) { \
+    { K00,   K01, K02,   K03, K04, K05, K06,   K07 }, \
+    { KC_NO, K11, K12,   K13, K14, K15, K16,   K17 }, \
+    { K20,   K21, KC_NO, K23, K24, K25, KC_NO, K27 }, \
+    { K30,   K31, K32,   K33, K34, K35, K36,   K37 }, \
+    { K40,   K41, K42,   K43, K44, K45, K46,   K47 }, \
+    { K50,   K51, K52,   K53, K54, K55, K56,   K57 }, \
+    { K60,   K61, K62,   K63, K64, K65, K66,   K67 }, \
+    { K70,   K71, K72,   K73, K74, K75, K76,   K77 } \
+}
+
+#define LAYOUT_standard_60( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17,      K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31,      K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21,  \
+    K30, K40, K50,           K60,                     K70, K00, K10, K20  \
+) { \
+    { K00, K01,   K02,   K03, K04, K05, K06,   K07 }, \
+    { K10, K11,   K12,   K13, K14, K15, K16,   K17 }, \
+    { K20, K21,   KC_NO, K23, K24, K25, KC_NO, K27 }, \
+    { K30, K31,   K32,   K33, K34, K35, K36,   K37 }, \
+    { K40, KC_NO, K42,   K43, K44, K45, K46,   K47 }, \
+    { K50, K51,   K52,   K53, K54, K55, K56,   K57 }, \
+    { K60, K61,   K62,   K63, K64, K65, K66,   K67 }, \
+    { K70, K71,   K72,   K73, K74, K75, K76,   K77 } \
+}
+
+#define LAYOUT_infinity( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31,      K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \
+    K30, K40, K50,           K60,                     K70, K00, K10, K20  \
+) { \
+    { K00, K01,   K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11,   K12, K13, K14, K15, K16, K17 }, \
+    { K20, K21,   K22, K23, K24, K25, K26, K27 }, \
+    { K30, K31,   K32, K33, K34, K35, K36, K37 }, \
+    { K40, KC_NO, K42, K43, K44, K45, K46, K47 }, \
+    { K50, K51,   K52, K53, K54, K55, K56, K57 }, \
+    { K60, K61,   K62, K63, K64, K65, K66, K67 }, \
+    { K70, K71,   K72, K73, K74, K75, K76, K77 } \
+}
+
+#define LAYOUT_aek_103( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17,     K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31,      K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21,  \
+    K30, K40, K50,           K60,                     K70, K00,      K20  \
+) { \
+    { K00,   K01,   K02,   K03, K04, K05, K06,   K07 }, \
+    { KC_NO, K11,   K12,   K13, K14, K15, K16,   K17 }, \
+    { K20,   K21,   KC_NO, K23, K24, K25, KC_NO, K27 }, \
+    { K30,   K31,   K32,   K33, K34, K35, K36,   K37 }, \
+    { K40,   KC_NO, K42,   K43, K44, K45, K46,   K47 }, \
+    { K50,   K51,   K52,   K53, K54, K55, K56,   K57 }, \
+    { K60,   K61,   K62,   K63, K64, K65, K66,   K67 }, \
+    { K70,   K71,   K72,   K73, K74, K75, K76,   K77 } \
+}
+
+#define LAYOUT_kc( \
     K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
     K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
     K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \

keyboards/alps64/info.json

@@ -0,0 +1,28 @@
+{
+  "keyboard_name": "alps64",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+      "LAYOUT_all": {
+        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      },
+
+      "LAYOUT_standard_60": {
+          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      },
+
+      "LAYOUT_infinity": {
+        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":6}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Win", "x":11.5, "y":4}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+      },
+
+      "LAYOUT_aek_103": {
+        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.5}, {"x":4.25, "y":4, "w":6.5}, {"label":"Alt", "x":10.75, "y":4, "w":1.5}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+      },
+
+      "LAYOUT_iso": {
+        "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"AltGr", "x":11, "y":4, "w":1.5}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+      }
+  }
+}

keyboards/alps64/keymaps/default/keymap.c

@@ -2,7 +2,7 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: qwerty */
-    KC_KEYMAP( \
+    LAYOUT_kc( \
         GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, NUHS, BSPC, \
         TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
         CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,ENT,  \

keyboards/amj40/keymaps/jetpacktuxedo/keymap.c

@@ -0,0 +1,43 @@
+#include "amj40.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  // Default Layer
+  [0] = KEYMAP( \
+      KC_GESC,       KC_Q,    KC_W,   KC_E, KC_R, KC_T,    KC_Y, KC_U,    KC_I,    KC_O,   KC_P,   KC_BSPC,\
+      LT(2, KC_TAB), KC_A,    KC_S,   KC_D, KC_F, KC_G,    KC_H, KC_J,    KC_K,    KC_L,   LT(2, KC_ENT),\
+      KC_LSFT,       KC_Z,    KC_X,   KC_C, KC_V, KC_B,    KC_N, KC_M,    KC_COMM, KC_DOT, MT(MOD_RSFT, KC_SLSH),\
+      KC_LCTL,       KC_LGUI, KC_LALT,      LT(1, KC_SPC), LT(1, KC_SPC), KC_RALT, MO(3),  KC_RCTL \
+      ),
+
+  // Number Layer
+  [1] = KEYMAP( \
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+      KC_TRNS, KC_MINS, KC_EQL,  KC_SCLN, KC_QUOT, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_TRNS, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, MT(MOD_RSFT, KC_BSLS), \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\
+      ),
+
+  // Shifted Layer
+  [2] = KEYMAP( \
+      KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,\
+      KC_TRNS, KC_UNDS, KC_PLUS, KC_COLN, KC_DQUO, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_TRNS, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_RCBR, KC_PIPE, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\
+      ),
+
+  // Fkey Layer
+  [3] = KEYMAP( \
+      KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10, RESET,\
+      KC_TRNS, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+      KC_TRNS, TG(4),   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\
+      ),
+
+  // Gaming Layer
+  [4] = KEYMAP( \
+      KC_ESC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_U, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS,\
+      KC_TAB,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,\
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS\
+      ),
+};

keyboards/amj40/keymaps/jetpacktuxedo/readme.md

@@ -0,0 +1,55 @@
+Jetpacktuxedo's AMJ40 layout
+=====================
+
+This is based heavily on my minivan layout, with most difference stemming from the different widths between the minivan and the AMJ40. ![Image of my specific layout](https://i.imgur.com/B9XraJY.jpg)
+
+## Base Layer (0)
+
+The base layer is pretty simple, straight qwerty layout where available. Both spacebars go to layer 1 when held. `tab` is `tab` when pressed and `fn2` when held, `enter` is the same. `GESC` is `esc` when used alone, but `~` when shifted. `/` is `/` when tapped but `rshift` when held.
+```
+|GESC| Q  | W  | E  | R  | T  | Y  | U  | I  | O  | P  |BSPC|
+| TAB | A  | S  | D  | F  | G  | H  | J  | K  | L  | ENTER  |
+|LSHIFT | Z  | X  | C  | V  | B  | N  | M  | ,  | .  |  /   |
+|LCTRL|LWIN|LALT |  SPACE   |    SPACE    |RALT |FN 3|RCTRL |
+```
+
+## Number Layer (1)
+
+Numbers are set up just like on my minivan layout, but symbols are a bit different because the AMJ40 is one key narrower than the minivan and also lacks dedicated arrows. Decided to go with `hjkl` arrows, which takes some getting used to. `;` is on a layer now because of the narrowness I mentioned before, and it (along with `-`, `=`, and `'`) moves to the right hand to leave room for the `hjkl` arrows. `delete` on `backspace`, `[` and `]` on `<` and `>`, and `\` on `/` are all stolen straight from my minivan layout.
+```
+| `  | 1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | 0  |DEL |
+|     | -  | =  | ;  | '  |    | ←  | ↓  | ↑  | →  |        |
+|       |    |    |    |    |    |    |    | [  | ]  |  \   |
+|     |    |     |          |             |     |    |      |
+```
+
+## Shifted Layer (2)
+
+I don't want to be using two key combos constantly, so I also added this symbol layer that is basically shift+numeric layer. Also has nav keys on top of where arrows sit on the previous layer
+```
+| ~  | !  | @  | #  | $  | %  | ^  | &  | *  | (  | )  |DEL |
+|     | _  | +  | :  | "  |    |HOME|PGDN|PGUP|END |        |
+|       |    |    |    |    |    |    |    | {  | }  |  |   |
+|     |    |     |          |             |     |    |      |
+```
+
+## Fkey Layer (3)
+
+Honestly, I use this more for jumping to my gaming layer and for reset than I use it for Fkeys. Lol. Hitting the left windows key while in this layer locks the gaming layer listed below
+```
+|    | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 |F10 |RSET|
+|     |F11 |F12 |    |    |    |    |    |    |    |        |
+|       |    |    |    |    |    |    |    |    |    |      |
+|     |FN 4|     |          |             |     |    |      |
+```
+
+## "Gaming" Layer (4)
+
+Based on the "gaming" layer on my minivan that I mostly just use for mouse keys. To toggle this back off you hit the right windows key (to go to layer 3) and then the left windows key again.
+```
+|ESC |    |    |    |    |    |MWUP|MLCK|M UP|MRCK|    |    |
+| TAB |    |    |    |    |    |MWDN|M L |M DN|M R |        |
+|       |    |    |    |    |    |    |    |    |    |      |
+|     |    |     |  SPACE   |             |     |    |      |
+```
+

keyboards/amj40/keymaps/jetpacktuxedo/rules.mk

@@ -0,0 +1,27 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = no  # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. It uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/atom47/keymaps/maartenwut/keymap.c

@@ -11,36 +11,60 @@
 
 #define _______ KC_TRNS
 
+enum custom_keycodes {
+    CTRLZ = SAFE_RANGE,
+    CTRLX,
+    CTRLC,
+    CTRLV
+};
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_MA] = KEYMAP_ANSI(
-  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
+  KC_GESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
   KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
   KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	KC_RSFT,	\
   KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_LO),				KC_SPC, 				KC_SPC,					MO(_RA),	KC_RALT,	KC_APP,		KC_RCTRL),	\
 
+[_LO] = KEYMAP_ANSI(
+  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
+  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
+  _______,					CTRLZ,		CTRLX,		CTRLC,		CTRLV,		_______,	_______,	KC_QUOT,	KC_LBRC,	KC_RBRC,	KC_BSLS,	_______,	\
+  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),	\
+
 [_RA] = KEYMAP_ANSI(
   _______,		_______,	_______,	_______,	_______,	_______,	_______,	KC_PGUP,	KC_UP,		KC_PGDN,	_______,	_______,	_______,	\
   KC_CAPS,		_______,	_______,	_______,	_______,	_______,	_______,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	_______,				_______,	\
   _______,					_______,	_______,	_______,	_______,	_______,	_______,	_______,	KC_VOLD,	KC_VOLU,	KC_MPLY,	KC_PSCR,	\
   _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
 
-[_LO] = KEYMAP_ANSI(
-  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
-  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
-  _______,					_______,	_______,	_______,	_______,	_______,	_______,	KC_QUOT,	KC_LBRC,	KC_RBRC,	KC_BSLS,	_______,	\
-  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),	\
-
 };
 
 void led_set_user(uint8_t usb_led) {
     if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
         // Turn capslock on
- 	   	PORTE &= ~(1 << 6);
-
-
+		PORTE &= ~(1 << 6);
     } else {
         // Turn capslock off
     	PORTE |= (1 << 6);
     }
 }
 
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        switch(keycode) {
+            case CTRLZ:
+                SEND_STRING(SS_LCTRL("z"));
+                return false;
+            case CTRLX:
+                SEND_STRING(SS_LCTRL("x"));
+                return false;
+            case CTRLC:
+                SEND_STRING(SS_LCTRL("c"));
+                return false;
+            case CTRLV:
+                SEND_STRING(SS_LCTRL("v"));
+                return false;
+        }
+    }
+    return true;
+};

keyboards/bigseries/bigseries.c

@@ -0,0 +1,26 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "bigseries.h"
+
+void matrix_scan_kb(void) {
+  // Looping keyboard code goes here
+  // This runs every cycle (a lot)
+  matrix_scan_user();
+#ifdef BACKLIGHT_ENABLE
+  backlight_task();
+#endif
+};

keyboards/bigseries/bigseries.h

@@ -0,0 +1,28 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef BIGSWITCH_H
+#define BIGSWITCH_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+  K00  \
+) { \
+  { K00 }  \
+}
+
+#endif

keyboards/bigseries/config.h

@@ -0,0 +1,59 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6071
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    WoodKeys.click
+#define PRODUCT         BigSeries Single Keyboard
+#define DESCRIPTION     Single key board for Novelkeys Big Series Switch
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 1
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0 }
+#define MATRIX_COL_PINS { B4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 50
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    false \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#ifdef RGBLIGHT_ENABLE
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 5
+#endif
+
+#endif

keyboards/bigseries/keymaps/8ball/keymap.c

@@ -0,0 +1,144 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "../../bigseries.h"
+
+static const char * const ANSWERS[] = {
+// "Yes" answers
+"It is certain\n",
+"It is decidedly so\n",
+"Without a doubt\n",
+"Yes definitely\n",
+"You may rely on it\n",
+"As I see it, yes\n",
+"Most likely\n",
+"Outlook good\n",
+"Yes\n",
+"Signs point to yes\n",
+// Uncertain answers, index 10
+"Reply hazy try again\n",
+"Ask again later\n",
+"Better not tell you now\n",
+"Cannot predict now\n",
+"Concentrate and ask again\n",
+// "No" answers, index 15
+"Don't count on it\n",
+"My reply is no\n",
+"My sources say no\n",
+"Outlook not so good\n",
+"Very doubtful\n"
+};
+
+#define UNCERTAIN_BREAK 10
+#define NO_BREAK 15
+#define NUM_ANSWERS 20
+// Timeout of answer color in ms
+#define ANSWER_TIMEOUT 3000
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+KEYMAP(
+    KC_A),
+};
+
+
+void reset_rgb(void);
+
+bool initialized = 0;
+uint32_t lastTime = 0;
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+void matrix_init_user(void) {
+  if (!initialized){
+      dprintf("Initializing in matrix_scan_user");
+      rgblight_enable();
+      reset_rgb();
+      initialized = 1;
+    }
+}
+
+void matrix_scan_user(void) {
+  if (lastTime > 0 && timer_elapsed32(lastTime) > ANSWER_TIMEOUT) {
+    lastTime = 0;
+    reset_rgb();
+  }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+  case KC_A:
+    if (record->event.pressed) {
+      uint8_t num = rand() / (RAND_MAX / NUM_ANSWERS + 1);
+      rgblight_mode(1);
+      if (num < UNCERTAIN_BREAK) {
+        rgblight_setrgb_green();
+      } else if (num < NO_BREAK) {
+        rgblight_setrgb_yellow();
+      } else {
+        rgblight_setrgb_red();
+      }
+      send_string(ANSWERS[num]);
+      lastTime = timer_read32();
+      return false;
+    }
+  }
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}
+
+void reset_rgb(void) {
+  // This gets called on init and after the timeout for the answer color
+  // If you want to change the default color/mode, do it here
+  rgblight_sethsv_blue();
+  rgblight_mode(7);
+}

keyboards/bigseries/keymaps/default/keymap.c

@@ -0,0 +1,93 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "../../bigseries.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+KEYMAP(
+    KC_A),
+
+
+};
+
+
+bool initialized = 0;
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+void matrix_init_user(void) {
+  if (!initialized){
+      dprintf("Initializing in matrix_scan_user");
+      rgblight_enable();
+      rgblight_mode(7);
+      rgblight_sethsv(0,255,255);
+      rgblight_setrgb(0x00, 0x00, 0xFF);
+      initialized = 1;
+    }
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+  case KC_A:
+    if (record->event.pressed) {
+      SEND_STRING("Howdy!!\n");
+      rgblight_step();
+      return false;
+    }
+  }
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/bigseries/keymaps/leddance/config.h

@@ -0,0 +1,23 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#define TAPPING_TERM 400
+
+#endif

keyboards/bigseries/keymaps/leddance/keymap.c

@@ -0,0 +1,127 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "../../bigseries.h"
+#include "print.h"
+
+extern rgblight_config_t rgblight_config;
+
+enum custom_keycodes {
+  BL = SAFE_RANGE
+};
+
+enum custom_layers {
+  BASE = 0,
+  LED
+};
+
+//Tap Dance Declarations
+enum {
+  TD_TOGGLE = 0
+};
+
+void dance_toggle (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count >= 2) {
+    println("Double tapped, switching layers");
+    if (layer_state_is(LED)) {
+      layer_off(LED);
+    } else {
+      layer_on(LED);
+    }
+  } else {
+    print("Single tapped: ");
+    if (layer_state_is(LED)) {
+#ifdef RGBLIGHT_ENABLE
+      if (!rgblight_config.enable) {
+        rgblight_enable();
+      }
+      rgblight_step();
+#endif
+    } else {
+      println("Base layer, sending string");
+      SEND_STRING("This thing is BIG!!\n");
+    }
+  }
+}
+
+//Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [TD_TOGGLE]  = ACTION_TAP_DANCE_FN(dance_toggle)
+// Other declarations would go here, separated by commas, if you have them
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[BASE] = KEYMAP(
+    TD(TD_TOGGLE)),
+[LED] = KEYMAP(
+    TD(TD_TOGGLE)
+    )
+
+
+};
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  // Nothing here, see dance_toggle
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/bigseries/keymaps/leddance/rules.mk

@@ -0,0 +1 @@
+TAP_DANCE_ENABLE = yes

keyboards/bigseries/readme.md

@@ -0,0 +1,15 @@
+# Big Series Keyboard
+
+![Big Series 1-Key](https://woodkeys.click/wp-content/uploads/2017/12/woodkeys_419.jpg)
+
+A PCB for the Big Series Switch by [NovelKeys](https://novelkeys.xyz). Available in 1, 2, 3, and 4 switch versions from [Woodkeys.click](https://woodkeys.click/product-category/big-series/).
+
+Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) / [Woodkeys.click](https://woodkeys.click)  
+Hardware Supported: Big Series PCBs  
+Hardware Availability:  [Woodkeys.click](https://woodkeys.click), [NovelKeys](https://novelkeys.xyz)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bigseries:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/bigseries/rules.mk

@@ -0,0 +1,59 @@
+#SRC += rgb_backlight.c
+
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE  = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE  = yes	# Console for debug(+400)
+COMMAND_ENABLE  = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE  = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE  = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE  = no  # Custom backlighting code is used, so this should not be enabled
+AUDIO_ENABLE  = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE  = yes # This can be enabled if a ws2812 strip is connected to the expansion port.
+

keyboards/chibios_test/stm32_f072_onekey/halconf.h

@@ -139,7 +139,7 @@
  * @brief   Enables the SERIAL over USB subsystem.
  */
 #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          TRUE
+#define HAL_USE_SERIAL_USB          FALSE
 #endif
 
 /**

keyboards/chibios_test/stm32_f103_onekey/halconf.h

@@ -139,7 +139,7 @@
  * @brief   Enables the SERIAL over USB subsystem.
  */
 #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          TRUE
+#define HAL_USE_SERIAL_USB          FALSE
 #endif
 
 /**