Refactor more backlight to a common location (#8292)

* Refactor more backlight to a common location

* BACKLIGHT_PIN not defined for custom backlight

* align function names

.github/ISSUE_TEMPLATE/bug_report.md

@@ -2,7 +2,7 @@
 name: Bug report
 about: Create a report to help us improve QMK Firmware.
 title: "[Bug] "
-labels: bug, help wanted, discussion
+labels: bug, help wanted
 assignees: ''
 
 ---

.github/ISSUE_TEMPLATE/feature_request.md

@@ -2,7 +2,7 @@
 name: Feature request
 about: Suggest a new feature or changes to existing features.
 title: "[Feature Request] "
-labels: enhancement, help wanted, discussion
+labels: enhancement, help wanted
 assignees: ''
 
 ---

.github/ISSUE_TEMPLATE/other_issues.md

@@ -2,7 +2,7 @@
 name: Other issues
 about: Anything else that doesn't fall into the above categories.
 title: ''
-labels: help wanted, question, discussion
+labels: help wanted, question
 assignees: ''
 
 ---

.github/stale.yml

@@ -0,0 +1,58 @@
+# Configuration for probot-stale - https://github.com/probot/stale
+
+# General configuration
+
+# Pull request specific configuration
+pulls:
+  staleLabel: awaiting changes
+  # Number of days of inactivity before an Issue or Pull Request becomes stale
+  daysUntilStale: 45
+  # Number of days of inactivity before a stale Issue or Pull Request is closed.
+  # Set to false to disable. If disabled, issues still need to be closed manually, but will remain marked as stale.
+  daysUntilClose: 30
+  # Comment to post when marking as stale. Set to `false` to disable
+  markComment: >
+    Thank you for your contribution!
+
+    This pull request has been automatically marked as stale because it has not had
+    activity in the last 45 days. It will be closed in 30 days if no further activity occurs.
+    Please feel free to give a status update now, or re-open when it's ready.
+    
+    For maintainers: Please label with `awaiting review`, `breaking_change`, `in progress`, or `on hold` to prevent 
+    the issue from being re-flagged.
+  # Comment to post when closing a stale Issue or Pull Request.
+  closeComment: >
+    Thank you for your contribution!
+
+    This pull request has been automatically closed because it has not had activity in the last 30 days.
+    Please feel free to give a status update now, ping for review, or re-open when it's ready.
+  # Limit the number of actions per hour, from 1-30. Default is 30
+  limitPerRun: 30
+  exemptLabels:
+    - awaiting review
+    - breaking_change
+    - in progress
+    - on hold
+
+# Issue specific configuration
+issues:
+  staleLabel: stale
+  limitPerRun: 10
+  daysUntilStale: 90
+  daysUntilClose: 30
+  markComment: >
+    This issue has been automatically marked as stale because it has not had activity in the
+    last 90 days. It will be closed in the next 30 days unless it is tagged properly or other activity
+    occurs.
+    
+    For maintainers: Please label with `bug`, `in progress`, `on hold`, `discussion` or `to do` to prevent 
+    the issue from being re-flagged.
+  closeComment: >
+    This issue has been automatically closed because it has not had activity in the last 30 days.
+    If this issue is still valid, re-open the issue and let us know.
+  exemptLabels:
+    - bug
+    - in progress
+    - on hold
+    - discussion
+    - to do

.github/workflows/cli.yml

@@ -0,0 +1,28 @@
+name: CLI CI
+
+on:
+  push:
+    branches:
+    - master
+    - future
+  pull_request:
+    paths:
+    - 'lib/python/**'
+    - 'bin/qmk'
+    - 'requirements.txt'
+    - '.github/workflows/cli.yml'
+
+jobs:
+  test:
+    runs-on: ubuntu-latest
+
+    container: qmkfm/base_container
+
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        submodules: recursive
+    - name: Install dependencies
+      run: pip3 install -r requirements.txt
+    - name: Run tests
+      run: bin/qmk pytest

.gitignore

@@ -63,9 +63,6 @@ util/Win_Check_Output.txt
 *.gif
 *.jpg
 
-# Do not ignore MiniDox left/right hand eeprom files
-!keyboards/minidox/*.eep
-
 # things travis sees
 secrets.tar
 id_rsa_*
@@ -73,3 +70,6 @@ id_rsa_*
 
 # python things
 __pycache__
+
+# prerequisites for updating ChibiOS
+/util/fmpp*

.gitmodules

@@ -1,13 +1,15 @@
 [submodule "lib/chibios"]
 	path = lib/chibios
 	url = https://github.com/qmk/ChibiOS
+	branch = master
 [submodule "lib/chibios-contrib"]
 	path = lib/chibios-contrib
 	url = https://github.com/qmk/ChibiOS-Contrib
-	branch = k-type-fix
+	branch = master
 [submodule "lib/ugfx"]
 	path = lib/ugfx
 	url = https://github.com/qmk/uGFX
+	branch = master
 [submodule "lib/googletest"]
 	path = lib/googletest
 	url = https://github.com/google/googletest

.travis.yml

@@ -12,6 +12,18 @@ env:
   - MAKEFLAGS="-j3 --output-sync"
 services:
   - docker
+addons:
+  apt:
+    sources:
+      - ubuntu-toolchain-r-test
+      - llvm-toolchain-trusty-7
+    packages:
+    - pandoc
+    - diffutils
+    - dos2unix
+    - doxygen
+    - clang-format-7
+    - libstdc++-7-dev
 install:
   - npm install -g moxygen
 script:
@@ -20,13 +32,6 @@ script:
   - bash util/travis_test.sh
   - bash util/travis_build.sh
   - bash util/travis_docs.sh
-addons:
-  apt:
-    packages:
-    - pandoc
-    - diffutils
-    - dos2unix
-    - doxygen
 after_script:
   bash util/travis_compiled_push.sh
 notifications:

.vscode/settings.json

@@ -5,7 +5,8 @@
     // Configure glob patterns for excluding files and folders.
     "files.exclude": {
         "**/.build": true,
-        "**/*.hex": true
+        "**/*.hex": true,
+        "**/*.bin": true
     },
     "files.associations": {
       "*.h": "c",

Makefile

@@ -272,12 +272,14 @@ define PARSE_RULE
     # If the rule starts with all, then continue the parsing from
     # PARSE_ALL_KEYBOARDS
     ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all),true)
+        KEYBOARD_RULE=all
         $$(eval $$(call PARSE_ALL_KEYBOARDS))
     else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,test),true)
         $$(eval $$(call PARSE_TEST))
     # If the rule starts with the name of a known keyboard, then continue
     # the parsing from PARSE_KEYBOARD
     else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(KEYBOARDS)),true)
+        KEYBOARD_RULE=$$(MATCHED_ITEM)
         $$(eval $$(call PARSE_KEYBOARD,$$(MATCHED_ITEM)))
     # Otherwise use the KEYBOARD variable, which is determined either by
     # the current directory you run make from, or passed in as an argument
@@ -380,6 +382,9 @@ define PARSE_KEYBOARD
     # Otherwise try to match the keymap from the current folder, or arguments to the make command
     else ifneq ($$(KEYMAP),)
         $$(eval $$(call PARSE_KEYMAP,$$(KEYMAP)))
+    # Otherwise if we are running make all:<user> just skip
+    else ifeq ($$(KEYBOARD_RULE),all)
+        # $$(info Skipping: No user keymap for $$(CURRENT_KB))
     # Otherwise, make all keymaps, again this is consistent with how it works without
     # any arguments
     else
@@ -618,13 +623,19 @@ endif
 # Generate the version.h file
 ifndef SKIP_GIT
     GIT_VERSION := $(shell git describe --abbrev=6 --dirty --always --tags 2>/dev/null || date +"%Y-%m-%d-%H:%M:%S")
+    CHIBIOS_VERSION := $(shell cd lib/chibios && git describe --abbrev=6 --dirty --always --tags 2>/dev/null || date +"%Y-%m-%d-%H:%M:%S")
+    CHIBIOS_CONTRIB_VERSION := $(shell cd lib/chibios-contrib && git describe --abbrev=6 --dirty --always --tags 2>/dev/null || date +"%Y-%m-%d-%H:%M:%S")
 else
     GIT_VERSION := NA
+    CHIBIOS_VERSION := NA
+    CHIBIOS_CONTRIB_VERSION := NA
 endif
 ifndef SKIP_VERSION
 BUILD_DATE := $(shell date +"%Y-%m-%d-%H:%M:%S")
 $(shell echo '#define QMK_VERSION "$(GIT_VERSION)"' > $(ROOT_DIR)/quantum/version.h)
 $(shell echo '#define QMK_BUILDDATE "$(BUILD_DATE)"' >> $(ROOT_DIR)/quantum/version.h)
+$(shell echo '#define CHIBIOS_VERSION "$(CHIBIOS_VERSION)"' >> $(ROOT_DIR)/quantum/version.h)
+$(shell echo '#define CHIBIOS_CONTRIB_VERSION "$(CHIBIOS_CONTRIB_VERSION)"' >> $(ROOT_DIR)/quantum/version.h)
 else
 BUILD_DATE := NA
 endif

bin/qmk

@@ -25,6 +25,11 @@ with open(os.path.join(qmk_dir, 'requirements.txt'), 'r') as fd:
             line = line.split('#')[0]
 
         module = line.split('=')[0] if '=' in line else line
+
+        if module in ['pep8-naming']:
+            # Not every module is importable by its own name.
+            continue
+
         if not find_spec(module):
             print('Could not find module %s!' % module)
             print('Please run `pip3 install -r requirements.txt` to install the python dependencies.')
@@ -41,7 +46,7 @@ else:
     os.environ['QMK_VERSION'] = 'nogit-' + strftime('%Y-%m-%d-%H:%M:%S') + '-dirty'
 
 # Setup the CLI
-import milc
+import milc  # noqa
 
 milc.EMOJI_LOGLEVELS['INFO'] = '{fg_blue}Ψ{style_reset_all}'
 
@@ -61,7 +66,7 @@ def main():
     os.chdir(qmk_dir)
 
     # Import the subcommands
-    import qmk.cli
+    import qmk.cli  # noqa
 
     # Execute
     return_code = milc.cli()

bootloader.mk

@@ -82,6 +82,13 @@ ifeq ($(strip $(BOOTLOADER)), USBasp)
     OPT_DEFS += -DBOOTLOADER_USBASP
     BOOTLOADER_SIZE = 4096
 endif
+ifeq ($(strip $(BOOTLOADER)), lufa-ms)
+    # DO NOT USE THIS BOOTLOADER IN NEW PROJECTS!
+    # It is extremely prone to bricking, and is only included to support existing boards.
+    OPT_DEFS += -DBOOTLOADER_MS
+    BOOTLOADER_SIZE = 6144
+    FIRMWARE_FORMAT = bin
+endif
 
 ifdef BOOTLOADER_SIZE
     OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))

build_json.mk

@@ -22,5 +22,5 @@ else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.json)","")
 endif
 
 # Generate the keymap.c
-$(KEYBOARD_OUTPUT)/src/keymap.c:
+$(KEYBOARD_OUTPUT)/src/keymap.c: $(KEYMAP_JSON)
 	bin/qmk json-keymap --quiet --output $(KEYMAP_C) $(KEYMAP_JSON)

docs/ChangeLog/20200229.md

@@ -0,0 +1,75 @@
+# QMK Breaking Change - 2020 Feb 29 Changelog
+
+Four times a year QMK runs a process for merging Breaking Changes. A Breaking Change is any change which modifies how QMK behaves in a way that is incompatible or potentially dangerous. We limit these changes to 4 times per year so that users can have confidence that updating their QMK tree will not break their keymaps.
+
+
+## Update ChibiOS/ChibiOS-Contrib/uGFX submodules
+
+* General Notes
+    * A `make git-submodule` may be required after pulling the latest QMK firmware code to update affected submodules to the upgraded revisions
+    * Enabling link-time-optimization (`LINK_TIME_OPTIMIZATION_ENABLE = yes`) should work on a lot more boards
+* Upgrade to ChibiOS ver19.1.3
+    * This will allow QMK to update to upstream ChibiOS a lot easier -- the old version was ~2 years out of date. Automated update scripts have been made available to simplify future upgrades.
+    * Includes improved MCU support and bugfixes
+    * ChibiOS revision is now included in Command output
+    * Timers should now be more accurate
+* Upgrade to newer ChibiOS-Contrib
+    * Also includes improved MCU support and bugfixes
+    * ChibiOS-Contrib revision is now included in Command output
+* Upgrade to newer uGFX
+    * Required in order to support updated ChibiOS
+
+
+## Fix ChibiOS timer overflow for 16-bit SysTick devices
+
+* On 16-bit SysTick devices, the timer subsystem in QMK was incorrectly dealing with overflow.
+    * When running at a 100000 SysTick frequency (possible on 16-bit devices, but uncommon), this overflow would occur after 0.65 seconds.
+* Timers are now correctly handling this overflow case and timing should now be correct on ChibiOS/ARM.
+
+
+## Update LUFA submodule
+
+* Updates the LUFA submodule to include updates from upstream (abcminiuser/lufa)
+* Includes some cleanup for QMK DFU generation
+
+
+## Encoder flip
+
+* Flips the encoder direction so that `clockwise == true` is for actually turning the knob clockwise
+* Adds `ENCODER_DIRECTION_FLIP` define, so that reversing the expected dirction is simple for users.
+* Cleans up documentation page for encoders
+
+
+## Adding support for `BACKLIGHT_ON_STATE` for hardware PWM backlight
+
+* Previously, the define only affected software PWM, and hardware PWM always assumed an N-channel MOSFET.
+* The hardware PWM backlight setup has been updated to respect this option.
+* The default "on" state has been changed to `1` - **this impacts all keyboards using software PWM backlight that do not define it explicitly**. If your keyboard's backlight is acting strange, it may have a P-channel MOSFET, and will need to have `#define BACKLIGHT_ON_STATE 0` added to the keyboard-level `config.h`. Please see the PR for more detailed information.
+
+
+## Migrating `ACTION_LAYER_TAP_KEY()` entries in `fn_actions` to `LT()` keycodes
+
+* `fn_actions` is deprecated, and its functionality has been superseded by direct keycodes and `process_record_user()`
+* The end result of removing this obsolete feature should result in a decent reduction in firmware size and code complexity
+* All keymaps affected are recommended to switch away from `fn_actions` in favour of the [custom keycode](https://docs.qmk.fm/#/custom_quantum_functions) and [macro](https://docs.qmk.fm/#/feature_macros) features
+
+
+## Moving backlight keycode handling to `process_keycode/`
+
+* This refactors the backlight keycode logic to be clearer and more modular.
+* All backlight-related keycodes are now actioned in a single file.
+* The `ACTION_BACKLIGHT_*` macros have also been deleted. If you are still using these in a `fn_actions[]` block, please switch to using the backlight keycodes or functions directly.
+
+
+## Refactor Planck keymaps to use Layout Macros
+
+* Refactor Planck keymaps to use layout macros instead of raw matrix assignments
+* Makes keymaps revision-agnostic
+* Should reduce noise and errors in Travis CI logs
+
+
+## GON NerD codebase refactor
+
+* Splits the codebase for GON NerD 60 and NerdD TKL PCBs into two separate directories.
+* If your keymap is for a NerD 60 PCB, your `make` command is now `make gon/nerd60:<keymap>`.
+* If your keymap is for a NerD TKL PCB, your `make` command is now `make gon/nerdtkl:<keymap>`.

docs/README.md

@@ -9,24 +9,35 @@
 
 ## What is QMK Firmware?
 
-QMK (*Quantum Mechanical Keyboard*) is an open source community that maintains QMK Firmware, QMK Toolbox, qmk.fm, and these docs. QMK Firmware is a keyboard firmware based on the [tmk\_keyboard](http://github.com/tmk/tmk_keyboard) with some useful features for Atmel AVR controllers, and more specifically, the [OLKB product line](http://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/). It has also been ported to ARM chips using ChibiOS. You can use it to power your own hand-wired or custom keyboard PCB.
+QMK (*Quantum Mechanical Keyboard*) is an open source community centered around developing computer input devices. The community encompasses all sorts of input devices, such as keyboards, mice, and MIDI devices. A core group of collaborators maintains [QMK Firmware](https://github.com/qmk/qmk_firmware), [QMK Configurator](https://config.qmk.fm), [QMK Toolbox](https://github.com/qmk/qmk_toolbox), [qmk.fm](https://qmk.fm), and this documentation with the help of community members like you.
 
-## How to Get It
+## Get Started
 
-If you plan on contributing a keymap, keyboard, or features to QMK, the easiest thing to do is [fork the repo through Github](https://github.com/qmk/qmk_firmware#fork-destination-box), and clone your repo locally to make your changes, push them, then open a [Pull Request](https://github.com/qmk/qmk_firmware/pulls) from your fork.
+Totally new to QMK? There are two ways to get started:
 
-Otherwise, you can either download it directly ([zip](https://github.com/qmk/qmk_firmware/zipball/master), [tar](https://github.com/qmk/qmk_firmware/tarball/master)), or clone it via git (`git@github.com:qmk/qmk_firmware.git`), or https (`https://github.com/qmk/qmk_firmware.git`).
+* Basic: [QMK Configurator](https://config.qmk.fm)
+    * Just select your keyboard from the dropdown and program your keyboard.
+    * We have an [introductory video](https://www.youtube.com/watch?v=-imgglzDMdY) you can watch.
+    * There is also an overview [document you can read](newbs_building_firmware_configurator.md).
+* Advanced: [Use The Source](newbs.md)
+    * More powerful, but harder to use
 
-## How to Compile
+## Make It Yours
 
-Before you are able to compile, you'll need to [install an environment](getting_started_build_tools.md) for AVR or/and ARM development. Once that is complete, you'll use the `make` command to build a keyboard and keymap with the following notation:
+QMK has lots of [features](features.md) to explore, and a good deal of reference documentation to dig through. Most features are taken advantage of by modifying your [keymap](keymap.md), and changing the [keycodes](keycodes.md).
 
-    make planck/rev4:default
+## Need help?
 
-This would build the `rev4` revision of the `planck` with the `default` keymap. Not all keyboards have revisions (also called subprojects or folders), in which case, it can be omitted:
+Check out the [support page](support.md) to see how you can get help using QMK.
 
-    make preonic:default
+## Give Back
 
-## How to Customize
+There are a lot of ways you can contribute to the QMK Community. The easiest way to get started is to use it and spread the word to your friends.
 
-QMK has lots of [features](features.md) to explore, and a good deal of [reference documentation](http://docs.qmk.fm) to dig through. Most features are taken advantage of by modifying your [keymap](keymap.md), and changing the [keycodes](keycodes.md).
+* Help people out on our forums and chat rooms:
+    * [/r/olkb](https://www.reddit.com/r/olkb/)
+    * [Discord Server](https://discord.gg/Uq7gcHh)
+* Contribute to our documentation by clicking "Edit This Page" at the bottom
+* [Translate our documentation into your language](translating.md)
+* [Report a bug](https://github.com/qmk/qmk_firmware/issues/new/choose)
+* [Open a Pull Request](contributing.md)

docs/_langs.md

@@ -4,5 +4,6 @@
   - [:es: Español](/es/)
   - [:fr: Français](/fr-fr/)
   - [:he: עברית](/he-il/)
+  - [:brazil: Português](/pt-br/)
   - [:ru: Русский](/ru-ru/)
-  - [:ja: 日本語](/ja/)
+  - [:jp: 日本語](/ja/)

docs/_summary.md

@@ -1,123 +1,162 @@
-* [Complete Newbs Guide](newbs.md)
-  * [Getting Started](newbs_getting_started.md)
+* Tutorial
+  * [Introduction](newbs.md)
+  * [Setup](newbs_getting_started.md)
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Testing and Debugging](newbs_testing_debugging.md)
-  * [Git Best Practices](newbs_best_practices.md)
-  * [Learning Resources](newbs_learn_more_resources.md)
+  * [Getting Help/Support](support.md)
+  * [Other Resources](newbs_learn_more_resources.md)
 
-* [QMK Basics](README.md)
-  * [QMK Introduction](getting_started_introduction.md)
-  * [QMK CLI](cli.md)
-  * [QMK CLI Config](cli_configuration.md)
-  * [Contributing to QMK](contributing.md)
-  * [How to Use Github](getting_started_github.md)
-  * [Getting Help](getting_started_getting_help.md)
-
-* [Breaking Changes](breaking_changes.md)
-  * [2019 Aug 30](ChangeLog/20190830.md)
-
-* [FAQ](faq.md)
+* FAQs
   * [General FAQ](faq_general.md)
   * [Build/Compile QMK](faq_build.md)
   * [Debugging/Troubleshooting QMK](faq_debug.md)
-  * [Keymap](faq_keymap.md)
-  * [Driver Installation with Zadig](driver_installation_zadig.md)
-
-* Detailed Guides
-  * [Install Build Tools](getting_started_build_tools.md)
-  * [Vagrant Guide](getting_started_vagrant.md)
-  * [Build/Compile Instructions](getting_started_make_guide.md)
-  * [Flashing Firmware](flashing.md)
-  * [Customizing Functionality](custom_quantum_functions.md)
-  * [Keymap Overview](keymap.md)
-
-* [Hardware](hardware.md)
-  * [Compatible Microcontrollers](compatible_microcontrollers.md)
-  * [AVR Processors](hardware_avr.md)
-  * [Drivers](hardware_drivers.md)
-
-* Reference
-  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
-  * [Config Options](config_options.md)
-  * [Keycodes](keycodes.md)
-  * [Coding Conventions - C](coding_conventions_c.md)
-  * [Coding Conventions - Python](coding_conventions_python.md)
-  * [Documentation Best Practices](documentation_best_practices.md)
-  * [Documentation Templates](documentation_templates.md)
+  * [Keymap FAQ](faq_keymap.md)
   * [Glossary](reference_glossary.md)
-  * [Unit Testing](unit_testing.md)
-  * [Useful Functions](ref_functions.md)
-  * [Configurator Support](reference_configurator_support.md)
-  * [info.json Format](reference_info_json.md)
-  * [Python CLI Development](cli_development.md)
 
-* [Features](features.md)
-  * [Basic Keycodes](keycodes_basic.md)
-  * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
-  * [Quantum Keycodes](quantum_keycodes.md)
-  * [Advanced Keycodes](feature_advanced_keycodes.md)
-  * [Audio](feature_audio.md)
-  * [Auto Shift](feature_auto_shift.md)
-  * [Backlight](feature_backlight.md)
-  * [Bluetooth](feature_bluetooth.md)
-  * [Bootmagic](feature_bootmagic.md)
-  * [Combos](feature_combo.md)
-  * [Command](feature_command.md)
-  * [Debounce API](feature_debounce_type.md)
-  * [DIP Switch](feature_dip_switch.md)
-  * [Dynamic Macros](feature_dynamic_macros.md)
-  * [Encoders](feature_encoders.md)
-  * [Grave Escape](feature_grave_esc.md)
-  * [Haptic Feedback](feature_haptic_feedback.md)
-  * [HD44780 LCD Controller](feature_hd44780.md)
-  * [Key Lock](feature_key_lock.md)
-  * [Layouts](feature_layouts.md)
-  * [Leader Key](feature_leader_key.md)
-  * [LED Matrix](feature_led_matrix.md)
-  * [Macros](feature_macros.md)
-  * [Mouse Keys](feature_mouse_keys.md)
-  * [OLED Driver](feature_oled_driver.md)
-  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
-  * [Pointing Device](feature_pointing_device.md)
-  * [PS/2 Mouse](feature_ps2_mouse.md)
-  * [RGB Lighting](feature_rgblight.md)
-  * [RGB Matrix](feature_rgb_matrix.md)
-  * [Space Cadet](feature_space_cadet.md)
-  * [Split Keyboard](feature_split_keyboard.md)
-  * [Stenography](feature_stenography.md)
-  * [Swap Hands](feature_swap_hands.md)
-  * [Tap Dance](feature_tap_dance.md)
-  * [Terminal](feature_terminal.md)
-  * [Thermal Printer](feature_thermal_printer.md)
-  * [Unicode](feature_unicode.md)
-  * [Userspace](feature_userspace.md)
-  * [Velocikey](feature_velocikey.md)
+* Configurator
+  * [Overview](newbs_building_firmware_configurator.md)
+  * [Step by Step](configurator_step_by_step.md)
+  * [Troubleshooting](configurator_troubleshooting.md)
+  * [Problems and Bugs](configurator_problems.md)
+  * QMK API
+    * [Overview](api_overview.md)
+    * [API Documentation](api_docs.md)
+    * [Keyboard Support](reference_configurator_support.md)
 
-* For Makers and Modders
-  * [Hand Wiring Guide](hand_wire.md)
-  * [ISP Flashing Guide](isp_flashing_guide.md)
-  * [ARM Debugging Guide](arm_debugging.md)
-  * [I2C Driver](i2c_driver.md)
-  * [WS2812 Driver](ws2812_driver.md)
-  * [GPIO Controls](internals_gpio_control.md)
-  * [Proton C Conversion](proton_c_conversion.md)
+* CLI
+    * [Overview](cli.md)
+    * [Configuration](cli_configuration.md)
+    * [Commands](cli_commands.md)
 
-* For a Deeper Understanding
-  * [How Keyboards Work](how_keyboards_work.md)
-  * [Understanding QMK](understanding_qmk.md)
+* Using QMK
+  * Guides
+    * [Customizing Functionality](custom_quantum_functions.md)
+    * [Driver Installation with Zadig](driver_installation_zadig.md)
+    * [Keymap Overview](keymap.md)
+    * [Vagrant Guide](getting_started_vagrant.md)
+    * Flashing
+      * [Flashing](flashing.md)
+      * [Flashing ATmega32A (ps2avrgb)](flashing_bootloadhid.md)
+    * IDEs
+      * [Using Eclipse with QMK](other_eclipse.md)
+      * [Using VSCode with QMK](other_vscode.md)
+    * Git Best Practices
+      * [Introduction](newbs_git_best_practices.md)
+      * [Your Fork](newbs_git_using_your_master_branch.md)
+      * [Merge Conflicts](newbs_git_resolving_merge_conflicts.md)
+      * [Fixing Your Branch](newbs_git_resynchronize_a_branch.md)
+    * Keyboard Building
+      * [Hand Wiring Guide](hand_wire.md)
+      * [ISP Flashing Guide](isp_flashing_guide.md)
 
-* Other Topics
-  * [Using Eclipse with QMK](other_eclipse.md)
-  * [Using VSCode with QMK](other_vscode.md)
-  * [Support](support.md)
-  * [How to add translations](translating.md)
+  * Simple Keycodes
+    * [Full List](keycodes.md)
+    * [Basic Keycodes](keycodes_basic.md)
+    * [Layer Switching](feature_advanced_keycodes.md)
+    * [Quantum Keycodes](quantum_keycodes.md)
 
-* QMK Internals (In Progress)
-  * [Defines](internals_defines.md)
-  * [Input Callback Reg](internals_input_callback_reg.md)
-  * [Midi Device](internals_midi_device.md)
-  * [Midi Device Setup Process](internals_midi_device_setup_process.md)
-  * [Midi Util](internals_midi_util.md)
-  * [Send Functions](internals_send_functions.md)
-  * [Sysex Tools](internals_sysex_tools.md)
+  * Advanced Keycodes
+    * [Command](feature_command.md)
+    * [Dynamic Macros](feature_dynamic_macros.md)
+    * [Grave Escape](feature_grave_esc.md)
+    * [Leader Key](feature_leader_key.md)
+    * [Mod-Tap](mod_tap.md)
+    * [Macros](feature_macros.md)
+    * [Mouse Keys](feature_mouse_keys.md)
+    * [Space Cadet Shift](feature_space_cadet.md)
+    * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
+
+  * Software Features
+    * [Auto Shift](feature_auto_shift.md)
+    * [Combos](feature_combo.md)
+    * [Debounce API](feature_debounce_type.md)
+    * [Key Lock](feature_key_lock.md)
+    * [One Shot Keys](one_shot_keys.md)
+    * [Pointing Device](feature_pointing_device.md)
+    * [Swap Hands](feature_swap_hands.md)
+    * [Tap Dance](feature_tap_dance.md)
+    * [Tap-Hold Configuration](tap_hold.md)
+    * [Terminal](feature_terminal.md)
+    * [Unicode](feature_unicode.md)
+    * [Userspace](feature_userspace.md)
+
+  * Hardware Features
+    * Displays
+      * [HD44780 LCD Controller](feature_hd44780.md)
+      * [OLED Driver](feature_oled_driver.md)
+    * Lighting
+      * [Backlight](feature_backlight.md)
+      * [LED Matrix](feature_led_matrix.md)
+      * [RGB Lighting](feature_rgblight.md)
+      * [RGB Matrix](feature_rgb_matrix.md)
+    * [Audio](feature_audio.md)
+    * [Bluetooth](feature_bluetooth.md)
+    * [Bootmagic](feature_bootmagic.md)
+    * [Custom Matrix](custom_matrix.md)
+    * [DIP Switch](feature_dip_switch.md)
+    * [Encoders](feature_encoders.md)
+    * [Haptic Feedback](feature_haptic_feedback.md)
+    * [Proton C Conversion](proton_c_conversion.md)
+    * [PS/2 Mouse](feature_ps2_mouse.md)
+    * [Split Keyboard](feature_split_keyboard.md)
+    * [Stenography](feature_stenography.md)
+    * [Thermal Printer](feature_thermal_printer.md)
+    * [Velocikey](feature_velocikey.md)
+
+* Developing QMK
+  * Breaking Changes
+    * [Overview](breaking_changes.md)
+    * [My Pull Request Was Flagged](breaking_changes_instructions.md)
+    * History
+      * [2020 Feb 29](ChangeLog/20200229.md)
+      * [2019 Aug 30](ChangeLog/20190830.md)
+
+  * C Development
+    * [ARM Debugging Guide](arm_debugging.md)
+    * [AVR Processors](hardware_avr.md)
+    * [Coding Conventions](coding_conventions_c.md)
+    * [Compatible Microcontrollers](compatible_microcontrollers.md)
+    * [Drivers](hardware_drivers.md)
+      * [ADC Driver](adc_driver.md)
+      * [I2C Driver](i2c_driver.md)
+      * [WS2812 Driver](ws2812_driver.md)
+      * [EEPROM Driver](eeprom_driver.md)
+    * [GPIO Controls](internals_gpio_control.md)
+    * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
+
+  * Python Development
+    * [Coding Conventions](coding_conventions_python.md)
+    * [QMK CLI Development](cli_development.md)
+    * [QMK CLI Config](cli_dev_configuration.md)
+
+  * Configurator Development
+    * QMK API
+      * [Development Environment](api_development_environment.md)
+      * [Architecture Overview](api_development_overview.md)
+
+  * QMK Reference
+    * [Contributing to QMK](contributing.md)
+    * [Translating the QMK Docs](translating.md)
+    * [Config Options](config_options.md)
+    * [Make Documentation](getting_started_make_guide.md)
+    * [Documentation Best Practices](documentation_best_practices.md)
+    * [Documentation Templates](documentation_templates.md)
+    * [Community Layouts](feature_layouts.md)
+    * [Unit Testing](unit_testing.md)
+    * [Useful Functions](ref_functions.md)
+    * [info.json Format](reference_info_json.md)
+
+  * For a Deeper Understanding
+    * [How Keyboards Work](how_keyboards_work.md)
+    * [How a Matrix Works](how_a_matrix_works.md)
+    * [Understanding QMK](understanding_qmk.md)
+
+  * QMK Internals (In Progress)
+    * [Defines](internals_defines.md)
+    * [Input Callback Reg](internals_input_callback_reg.md)
+    * [Midi Device](internals_midi_device.md)
+    * [Midi Device Setup Process](internals_midi_device_setup_process.md)
+    * [Midi Util](internals_midi_util.md)
+    * [Send Functions](internals_send_functions.md)
+    * [Sysex Tools](internals_sysex_tools.md)

docs/adc_driver.md

@@ -0,0 +1,50 @@
+# ADC Driver
+
+QMK can leverage the Analog-to-Digital Converter (ADC) on supported MCUs to measure voltages on certain pins. This can be useful for implementing things such as battery level indicators for Bluetooth keyboards, or volume controls using a potentiometer, as opposed to a [rotary encoder](feature_encoders.md).
+
+This driver is currently AVR-only. The values returned are 10-bit integers (0-1023) mapped between 0V and VCC (usually 5V or 3.3V).
+
+## Usage
+
+To use this driver, add the following to your `rules.mk`:
+
+```make
+SRC += analog.c
+```
+
+Then place this include at the top of your code:
+
+```c
+#include "analog.h"
+```
+
+## Channels
+
+|Channel|AT90USB64/128|ATmega16/32U4|ATmega32A|ATmega328P|
+|-------|-------------|-------------|---------|----------|
+|0      |`F0`         |`F0`         |`A0`     |`C0`      |
+|1      |`F1`         |`F1`         |`A1`     |`C1`      |
+|2      |`F2`         |             |`A2`     |`C2`      |
+|3      |`F3`         |             |`A3`     |`C3`      |
+|4      |`F4`         |`F4`         |`A4`     |`C4`      |
+|5      |`F5`         |`F5`         |`A5`     |`C5`      |
+|6      |`F6`         |`F6`         |`A6`     |*         |
+|7      |`F7`         |`F7`         |`A7`     |*         |
+|8      |             |`D4`         |         |          |
+|9      |             |`D6`         |         |          |
+|10     |             |`D7`         |         |          |
+|11     |             |`B4`         |         |          |
+|12     |             |`B5`         |         |          |
+|13     |             |`B6`         |         |          |
+
+<sup>\* The ATmega328P possesses two extra ADC channels; however, they are not present on the DIP pinout, and are not shared with GPIO pins. You can use `adc_read()` directly to gain access to these.</sup>
+
+## Functions
+
+|Function                    |Description                                                                                                        |
+|----------------------------|-------------------------------------------------------------------------------------------------------------------|
+|`analogReference(mode)`     |Sets the analog voltage reference source. Must be one of `ADC_REF_EXTERNAL`, `ADC_REF_POWER` or `ADC_REF_INTERNAL`.|
+|`analogRead(pin)`           |Reads the value from the specified Arduino pin, eg. `4` for ADC6 on the ATmega32U4.                                |
+|`analogReadPin(pin)`        |Reads the value from the specified QMK pin, eg. `F6` for ADC6 on the ATmega32U4.                                   |
+|`pinToMux(pin)`             |Translates a given QMK pin to a mux value. If an unsupported pin is given, returns the mux value for "0V (GND)".   |
+|`adc_read(mux)`             |Reads the value from the ADC according to the specified mux. See your MCU's datasheet for more information.        |

docs/api_development_environment.md

@@ -0,0 +1,3 @@
+# Development Environment Setup
+
+To setup a development stack head over to the [qmk_web_stack](https://github.com/qmk/qmk_web_stack).

docs/api_development_overview.md

@@ -0,0 +1,44 @@
+# QMK Compiler Development Guide
+
+This page attempts to introduce developers to the QMK Compiler. It does not go into nitty gritty details- for that you should read code. What this will give you is a framework to hang your understanding on as you read the code.
+
+# Overview
+
+The QMK Compile API consists of a few movings parts:
+
+![Architecture Diagram](https://raw.githubusercontent.com/qmk/qmk_api/master/docs/architecture.svg)
+
+API Clients interact exclusively with the API service. This is where they submit jobs, check status, and download results. The API service inserts compile jobs into [Redis Queue](https://python-rq.org) and checks both RQ and S3 for the results of those jobs.
+
+Workers fetch new compile jobs from RQ, compile them, and then upload the source and the binary to an S3 compatible storage engine.
+
+# Workers
+
+QMK Compiler Workers are responsible for doing the actual building. When a worker pulls a job from RQ it does several things to complete that job:
+
+* Make a fresh qmk_firmware checkout
+* Use the supplied layers and keyboard metadata to build a `keymap.c`
+* Build the firmware
+* Zip a copy of the source
+* Upload the firmware, source zip, and a metadata file to S3.
+* Report the status of the job to RQ
+
+# API Service
+
+The API service is a relatively simple Flask application. There are a few main views you should understand.
+
+## @app.route('/v1/compile', methods=['POST'])
+
+This is the main entrypoint for the API. A client's interaction starts here. The client POST's a JSON document describing their keyboard, and the API does some (very) basic validation of that JSON before submitting the compile job.
+
+## @app.route('/v1/compile/<string:job_id>', methods=['GET'])
+
+This is the most frequently called endpoint. It pulls the job details from redis, if they're still available, or the cached job details on S3 if they're not.
+
+## @app.route('/v1/compile/<string:job_id>/download', methods=['GET'])
+
+This method allows users to download the compiled firmware file.
+
+## @app.route('/v1/compile/<string:job_id>/source', methods=['GET'])
+
+This method allows users to download the source for their firmware.

docs/api_docs.md

@@ -0,0 +1,68 @@
+# QMK API
+
+This page describes using the QMK API. If you are an application developer you can use this API to compile firmware for any [QMK](https://qmk.fm) Keyboard.
+
+## Overview
+
+This service is an asynchronous API for compiling custom keymaps. You POST some JSON to the API, periodically check the status, and when your firmware has finished compiling you can download the resulting firmware and (if desired) source code for that firmware.
+
+#### Example JSON Payload:
+
+```json
+{
+  "keyboard": "clueboard/66/rev2",
+  "keymap": "my_awesome_keymap",
+  "layout": "LAYOUT_all",
+  "layers": [
+    ["KC_GRV","KC_1","KC_2","KC_3","KC_4","KC_5","KC_6","KC_7","KC_8","KC_9","KC_0","KC_MINS","KC_EQL","KC_GRV","KC_BSPC","KC_PGUP","KC_TAB","KC_Q","KC_W","KC_E","KC_R","KC_T","KC_Y","KC_U","KC_I","KC_O","KC_P","KC_LBRC","KC_RBRC","KC_BSLS","KC_PGDN","KC_CAPS","KC_A","KC_S","KC_D","KC_F","KC_G","KC_H","KC_J","KC_K","KC_L","KC_SCLN","KC_QUOT","KC_NUHS","KC_ENT","KC_LSFT","KC_NUBS","KC_Z","KC_X","KC_C","KC_V","KC_B","KC_N","KC_M","KC_COMM","KC_DOT","KC_SLSH","KC_RO","KC_RSFT","KC_UP","KC_LCTL","KC_LGUI","KC_LALT","KC_MHEN","KC_SPC","KC_SPC","KC_HENK","KC_RALT","KC_RCTL","MO(1)","KC_LEFT","KC_DOWN","KC_RIGHT"],
+    ["KC_ESC","KC_F1","KC_F2","KC_F3","KC_F4","KC_F5","KC_F6","KC_F7","KC_F8","KC_F9","KC_F10","KC_F11","KC_F12","KC_TRNS","KC_DEL","BL_STEP","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","_______","KC_TRNS","KC_PSCR","KC_SLCK","KC_PAUS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_PGUP","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_LEFT","KC_PGDN","KC_RGHT"],
+    ["KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","RESET","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(2)","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","MO(1)","KC_TRNS","KC_TRNS","KC_TRNS"]
+  ]
+}
+```
+
+As you can see the payload describes all aspects of a keyboard necessary to create and generate a firmware. Each layer is a single list of QMK keycodes the same length as the keyboard's `LAYOUT` macro. If a keyboard supports mulitple `LAYOUT` macros you can specify which macro to use.
+
+## Submitting a Compile Job
+
+To compile your keymap into a firmware simply POST your JSON to the `/v1/compile` endpoint. In the following example we've placed the JSON payload into a file named `json_data`.
+
+```
+$ curl -H "Content-Type: application/json" -X POST -d "$(< json_data)" http://api.qmk.fm/v1/compile
+{
+  "enqueued": true,
+  "job_id": "ea1514b3-bdfc-4a7b-9b5c-08752684f7f6"
+}
+```
+
+## Checking The Status
+
+After submitting your keymap you can check the status using a simple HTTP GET call:
+
+```
+$ curl http://api.qmk.fm/v1/compile/ea1514b3-bdfc-4a7b-9b5c-08752684f7f6
+{
+  "created_at": "Sat, 19 Aug 2017 21:39:12 GMT",
+  "enqueued_at": "Sat, 19 Aug 2017 21:39:12 GMT",
+  "id": "f5f9b992-73b4-479b-8236-df1deb37c163",
+  "status": "running",
+  "result": null
+}
+```
+
+This shows us that the job has made it through the queue and is currently running. There are 5 possible statuses:
+
+* **failed**: Something about the compiling service has broken.
+* **finished**: The compilation is complete and you should check `result` to see the results.
+* **queued**: The keymap is waiting for a compilation server to become available.
+* **running**: The compilation is in progress and should be complete soon.
+* **unknown**: A serious error has occurred and you should [file a bug](https://github.com/qmk/qmk_compiler/issues).
+
+## Examining Finished Results
+
+Once your compile job has finished you'll check the `result` key. The value of this key is a hash containing several key bits of information:
+
+* `firmware_binary_url`: A list of URLs for the the flashable firmware
+* `firmware_keymap_url`: A list of URLs for the the `keymap.c`
+* `firmware_source_url`: A list of URLs for the full firmware source code
+* `output`: The stdout and stderr for this compile job. Errors will be found here.

docs/api_overview.md

@@ -0,0 +1,15 @@
+# QMK API
+
+The QMK API provides an asynchronous API that Web and GUI tools can use to compile arbitrary keymaps for any keyboard supported by [QMK](http://qmk.fm/). The stock keymap template supports all QMK keycodes that do not require supporting C code. Keyboard maintainers can supply their own custom templates to enable more functionality.
+
+## App Developers
+
+If you are an app developer interested in using this API in your application you should head over to [Using The API](api_docs.md).
+
+## Keyboard Maintainers
+
+If you would like to enhance your keyboard's support in the QMK Compiler API head over to the [Keyboard Support](reference_configurator_support.md) section.
+
+## Backend Developers
+
+If you are interested in working on the API itself you should start by setting up a [Development Environment](api_development_environment.md), then check out [Hacking On The API](api_development_overview.md).

docs/arm_debugging.md

@@ -1,4 +1,4 @@
-# ARM Debugging usign Eclipse
+# ARM Debugging using Eclipse
 
 This page describes how to setup debugging for ARM MCUs using an SWD adapter and open-source/free tools. In this guide we will install GNU MCU Eclipse IDE for C/C++ Developers and OpenOCD together with all the necessary dependencies.
 
@@ -18,7 +18,7 @@ XPM installation instructions can be found [here](https://www.npmjs.com/package/
 
 ### The ARM Toolchain
 
-Using XPM it is very easy to install the ARM toolchain. Enter the command `xpm install --global @gnu-mcu-eclipse/arm-none-eabi-gcc`.
+Using XPM it is very easy to install the ARM toolchain. Enter the command `xpm install --global @xpack-dev-tools/arm-none-eabi-gcc`.
 
 ### Windows build tools
 
@@ -33,7 +33,7 @@ If you have an ST-Link the drivers can be found [here](https://www.st.com/en/dev
 
 ### OpenOCD
 
-This dependency allows SWD access from GDB and it is essential for debugging. Run `xpm install --global @gnu-mcu-eclipse/openocd`.
+This dependency allows SWD access from GDB and it is essential for debugging. Run `xpm install --global @xpack-dev-tools/openocd`.
 
 ### Java
 
@@ -45,17 +45,17 @@ Now its finally time to install the IDE. Use the Release page [here](https://git
 
 ## Configuring Eclipse
 
-Open up the Eclipse IDE we just downloaded. To import our QMK directory select File -> Import -> C/C++ -> Existing code as Makefile Project. Select next and use Browse to select your QMK folder. In the tool-chain list select ARM Cross GCC and select Finish.
+Open up the Eclipse IDE we just downloaded. To import our QMK directory select File -> Import -> C/C++ -> Existing Code as Makefile Project. Select Next and use Browse to select your QMK folder. In the tool-chain list select ARM Cross GCC and select Finish.
 
-Now you can see the QMK folder on the left hand side. Right click it and select Properties. On the left hand side, expand MCU and select ARM Toolchain Paths. Press xPack and OK. Repeat for OpenOCD Path  and if you are on windows for Build Tool Path. Select Apply and Close.
+Now you can see the QMK folder on the left hand side. Right click it and select Properties. On the left hand side, expand MCU and select ARM Toolchains Paths. Press xPack and OK. Repeat for OpenOCD Path and if you are on Windows for Build Tools Path. Select Apply and Close.
 
-Now its time to install the necessary MCU packages. Go to Packs perspective by selecting Window -> Open Perspective -> Others -> Packs. Now select the yellow refresh symbol next to the Packs tab. This will take a long time as it is requesting the MCU definitions from various places. If some of the links fail you can probably select Ignore.
+Now its time to install the necessary MCU packages. Go to Packs perspective by selecting Window -> Perspective -> Open Perspective -> Other... -> Packs. Now select the yellow refresh symbol next to the Packs tab. This will take a long time as it is requesting the MCU definitions from various places. If some of the links fail you can probably select Ignore.
 
-When this finishes you must find the MCU which we will be building/debugging for. In this example I will be using the STM32F3 series MCUs. On the left, select STMicroelectonics -> STM32F3 Series. On the middle window we can see the pack. Right click and select Install. Once that is done we can go back to the default perspective, Window -> Open Perspective -> Others -> C/C++.
+When this finishes you must find the MCU which we will be building/debugging for. In this example I will be using the STM32F3 series MCUs. On the left, select STMicroelectronics -> STM32F3 Series. On the middle window we can see the pack. Right click and select Install. Once that is done we can go back to the default perspective, Window -> Perspective -> Open Perspective -> Other... -> C/C++.
 
-We need to let eclipse know the device we intent to build QMK on. Right click on the QMK folder -> Properties -> C/C++ Build -> Settings. Select the Devices tab and under devices select the appropriate variant of your MCU. For my example it is STM32F303CC
+We need to let eclipse know the device we intent to build QMK on. Right click on the QMK folder -> Properties -> C/C++ Build -> Settings. Select the Devices tab and under Devices select the appropriate variant of your MCU. For my example it is STM32F303CC
 
-While we are here let's setup the build command as well. Select C/C++ Build and then the Behavior tab. On the build command, replace `all` with your necessary make command. For example for a rev6 Planck with the default keymap this would be `planck/rev6:default`. Select Apply and Close.
+While we are here let's setup the build command as well. Select C/C++ Build and then the Behavior tab. On the Build command, replace `all` with your necessary make command. For example for a rev6 Planck with the default keymap this would be `planck/rev6:default`. Select Apply and Close.
 
 ## Building
 
@@ -71,7 +71,7 @@ NOTE: Make sure the SWCLK and SWDIO pins are not used in the matrix of your keyb
 
 ### Configuring the Debugger
 
-Right click on your QMK folder, select Debug As -> Debug Configuration. Here double click on GDB OpenOCD Debugging. Select the debugger tab and enter the configuration necessary for your MCU. This might take some fiddling and googleing to find out. The default script for the STM32F3 is called stm32f3discovery.cfg. To let OpenOCD know, in the Config options enter `-f board/stm32f3discovery.cfg`.
+Right click on your QMK folder, select Debug As -> Debug Configurations... . Here double click on GDB OpenOCD Debugging. Select the Debugger tab and enter the configuration necessary for your MCU. This might take some fiddling and Googling to find out. The default script for the STM32F3 is called `stm32f3discovery.cfg`. To let OpenOCD know, in the Config options enter `-f board/stm32f3discovery.cfg`.
 
 NOTE: In my case this configuration script requires editing to disable the reset assertion. The locations of the scripts can be found in the actual executable field usually under the path `openocd/version/.content/scripts/board`. Here I edited `reset_config srst_only` to `reset_config none`.
 
@@ -81,7 +81,7 @@ Select Apply and Close.
 
 Reset your keyboard.
 
-Press the bug icon and if all goes well you should soon find yourself in the debug perspective. Here the program counter will pause at the beginning of the main function and way for you to press Play. Most of the features of all debuggers work on ARM MCUs but for exact details google is your friend!
+Press the bug icon and if all goes well you should soon find yourself in the Debug perspective. Here the program counter will pause at the beginning of the main function and wait for you to press Play. Most of the features of all debuggers work on Arm MCUs but for exact details Google is your friend!
 
 
 Happy debugging!

docs/becoming_a_qmk_collaborator.md

@@ -1,9 +0,0 @@
-# Becoming a QMK Collaborator
-
-A QMK collaborator is a keyboard maker or designer that is interested in helping QMK grow and fully support their keyboard(s), and encouraging their users and customers to submit features, ideas, and keymaps. We're always looking to add more keyboards and collaborators, but we ask that they fulfill these requirements:
-
-* **Have a PCB available for sale.** Unfortunately there's just too much variation and complications with handwired keyboards.
-* **Maintain your keyboard in QMK.** This may just require an initial setup to get your keyboard working, but it could also include accommodating changes made to QMK's core that might break or render any custom code redundant.
-* **Approve and merge keymap pull requests for your keyboard.** We like to encourage users to contribute their keymaps for others to see and work from when creating their own.
-
-If you feel you meet these requirements, shoot us an email at hello@qmk.fm with an introduction and some links to your keyboard!

docs/breaking_changes.md

@@ -6,20 +6,21 @@ The breaking change period is when we will merge PR's that change QMK in dangero
 
 ## What has been included in past Breaking Changes?
 
+* [2020 Feb 29](ChangeLog/20200229.md)
 * [2019 Aug 30](ChangeLog/20190830.md)
 
 ## When is the next Breaking Change?
 
-The next Breaking Change is scheduled for Nov 29.
+The next Breaking Change is scheduled for May 30, 2020.
 
 ### Important Dates
 
-* [x] 2019 Sep 21 - `future` is created. It will be rebased weekly.
-* [ ] 2019 Nov 01 - `future` closed to new PR's.
-* [ ] 2019 Nov 01 - Call for testers.
-* [ ] 2019 Nov 27 - `master` is locked, no PR's merged.
-* [ ] 2019 Nov 29 - Merge `future` to `master`.
-* [ ] 2019 Nov 30 - `master` is unlocked. PR's can be merged again.
+* [x] 2020 Feb 29 - `future` is created. It will be rebased weekly.
+* [ ] 2020 May 2 - `future` closed to new PR's.
+* [ ] 2020 May 2 - Call for testers.
+* [ ] 2020 May 28 - `master` is locked, no PR's merged.
+* [ ] 2020 May 30 - Merge `future` to `master`.
+* [ ] 2020 May 30 - `master` is unlocked. PR's can be merged again.
 
 ## What changes will be included?
 

docs/breaking_changes_instructions.md

@@ -0,0 +1,42 @@
+# Breaking Changes: My Pull Request Was Flagged
+
+A QMK member may have replied to your pull request stating that your submission is a breaking change. In their judgment, the changes you have proposed have greater implications for either QMK, or its users.
+
+Some things that may cause a pull request to be flagged are:
+
+- **Edits to User Keymaps**
+  A user may submit their keymap to QMK, then some time later open a pull request with further updates, only to find it can't be merged because it was edited in the `qmk/qmk_firmware` repository. As not all users are proficient at using Git or GitHub, the user may find themself unable to fix the issue on their own.
+- **Changes to Expected Behavior**
+  Changes to QMK behavior may cause users to believe their hardware or QMK is broken if they flash new firmware that incorporates changes to existing QMK features, and find themselves without a means to restore the desired behavior.
+- **Changes Requiring User Action**
+  Changes may also require action to be taken by users, such as updating a toolchain or taking some action in Git.
+- **Changes Necessitating Increased Scrutiny**
+  On occasion, a submission may have implications for QMK as a project. This could be copyright/licensing issues, coding conventions, large feature overhauls, "high-risk" changes that need wider testing by our community, or something else entirely.
+- **Changes Requiring Communication to End Users**
+  This includes warnings about future deprecations, outdated practices, and anything else that needs to be communicated but doesn't fit into one of the above categories.
+
+## What Do I Do?
+
+If it is determined that your submission is a breaking change, there are a few things you can do to smooth the process:
+
+### Consider Splitting Up Your PR
+
+If you are contributing core code, and the only reason it needs to go through breaking changes is that you are updating keymaps to match your change, consider whether you can submit your feature in a way that the old keymaps continue to work. Then submit a separate PR that goes through the breaking changes process to remove the old code.
+
+### Contribute a ChangeLog Entry
+
+We require submissions that go through the Breaking Change process to include a changelog entry. The entry should be a short summary of the changes your pull request makes – [each section here started as a changelog](ChangeLog/20190830.md "n.b. This should link to the 2019 Aug 30 Breaking Changes doc  - @noroadsleft").
+
+Your changelog should be located at `docs/ChangeLog/YYYYMMDD/PR####.md`, where `YYYYMMDD` is the date on which QMK's breaking change branch – usually named `future` – will be merged into the `master` branch, and `####` is the number of your pull request.
+
+If your submission requires action on the part of users, your changelog should instruct users what action(s) must be taken, or link to a location that does so.
+
+### Document Your Changes
+
+Understanding the purpose for your submission, and possible implications or actions it will require can make the review process more straightforward. A changelog may suffice for this purpose, but more extensive changes may require a level of detail that is ill-suited for a changelog.
+
+Commenting on your pull request and being responsive to questions, comments, and change requests is much appreciated.
+
+### Ask for Help
+
+Having your submission flagged may have caught you off guard. If you find yourself intimidated or overwhelmed, let us know. Comment on your pull request, or [reach out to the QMK team on Discord](https://discord.gg/Uq7gcHh).

docs/cli.md

@@ -71,17 +71,39 @@ There are some limitations to the local CLI compared to the global CLI:
 
 ## `qmk cformat`
 
-This command formats C code using clang-format. Run it with no arguments to format all core code, or pass filenames on the command line to run it on specific files.
+This command formats C code using clang-format. 
 
-**Usage**:
+Run it with no arguments to format all core code that has been changed. Default checks `origin/master` with `git diff`, branch can be changed using `-b <branch_name>`
+
+Run it with `-a` to format all core code, or pass filenames on the command line to run it on specific files.
+
+**Usage for specified files**:
 
 ```
 qmk cformat [file1] [file2] [...] [fileN]
 ```
 
+**Usage for all core files**:
+
+```
+qmk cformat -a
+```
+
+**Usage for only changed files against origin/master**:
+
+```
+qmk cformat
+```
+
+**Usage for only changed files against branch_name**:
+
+```
+qmk cformat -b branch_name
+```
+
 ## `qmk compile`
 
-This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm> or compile keymaps in the repo.
+This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm>, compile keymaps in the repo, or compile the keyboard in the current working directory.
 
 **Usage for Configurator Exports**:
 
@@ -95,6 +117,76 @@ qmk compile <configuratorExport.json>
 qmk compile -kb <keyboard_name> -km <keymap_name>
 ```
 
+**Usage in Keyboard Directory**:  
+
+Must be in keyboard directory with a default keymap, or in keymap directory for keyboard, or supply one with `--keymap <keymap_name>`
+```
+qmk compile
+```
+
+**Example**:
+```
+$ qmk config compile.keymap=default
+$ cd ~/qmk_firmware/keyboards/planck/rev6
+$ qmk compile
+Ψ Compiling keymap with make planck/rev6:default
+...
+```
+or with optional keymap argument
+
+```
+$ cd ~/qmk_firmware/keyboards/clueboard/66/rev4 
+$ qmk compile -km 66_iso
+Ψ Compiling keymap with make clueboard/66/rev4:66_iso
+...
+```
+or in keymap directory
+
+```
+$ cd ~/qmk_firmware/keyboards/gh60/satan/keymaps/colemak
+$ qmk compile
+Ψ Compiling keymap with make make gh60/satan:colemak
+...
+```
+
+**Usage in Layout Directory**:  
+
+Must be under `qmk_firmware/layouts/`, and in a keymap folder.
+```
+qmk compile -kb <keyboard_name>
+```
+
+**Example**:
+```
+$ cd ~/qmk_firmware/layouts/community/60_ansi/mechmerlin-ansi
+$ qmk compile -kb dz60
+Ψ Compiling keymap with make dz60:mechmerlin-ansi
+...
+```
+
+## `qmk flash`
+
+This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default.
+To specify a different bootloader, use `-bl <bootloader>`. Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
+
+**Usage for Configurator Exports**:
+
+```
+qmk flash <configuratorExport.json> -bl <bootloader>
+```
+
+**Usage for Keymaps**:
+
+```
+qmk flash -kb <keyboard_name> -km <keymap_name> -bl <bootloader>
+```
+
+**Listing the Bootloaders**
+
+```
+qmk flash -b
+```
+
 ## `qmk config`
 
 This command lets you configure the behavior of QMK. For the full `qmk config` documentation see [CLI Configuration](cli_configuration.md).
@@ -117,14 +209,28 @@ qmk docs [-p PORT]
 
 ## `qmk doctor`
 
-This command examines your environment and alerts you to potential build or flash problems.
+This command examines your environment and alerts you to potential build or flash problems. It can fix many of them if you want it to.
 
 **Usage**:
 
 ```
-qmk doctor
+qmk doctor [-y] [-n]
 ```
 
+**Examples**:
+
+Check your environment for problems and prompt to fix them:
+
+    qmk doctor
+
+Check your environment and automatically fix any problems found:
+
+    qmk doctor -y
+
+Check your environment and report problems only:
+
+    qmk doctor -n
+
 ## `qmk json-keymap`
 
 Creates a keymap.c from a QMK Configurator export.
@@ -167,6 +273,16 @@ This command lists all the keyboards currently defined in `qmk_firmware`
 qmk list-keyboards
 ```
 
+## `qmk list-keymaps`
+
+This command lists all the keymaps for a specified keyboard (and revision).
+
+**Usage**:
+
+```
+qmk list-keymaps -kb planck/ez
+```
+
 ## `qmk new-keymap`
 
 This command creates a new keymap based on a keyboard's existing default keymap.

docs/cli_dev_configuration.md

@@ -4,7 +4,7 @@ This document explains how `qmk config` works.
 
 # Introduction
 
-Configuration for QMK CLI is a key/value system. Each key consists of a subcommand and an argument name separated by a period. This allows for a straightforward and direct translation between config keys and the arguments they set.
+Configuration for the QMK CLI is a key/value system. Each key consists of a subcommand and an argument name separated by a period. This allows for a straightforward and direct translation between config keys and the arguments they set.
 
 ## Simple Example
 

docs/cli_development.md

@@ -173,3 +173,35 @@ You will only be able to access these arguments using `cli.args`. For example:
 ```
 cli.log.info('Reading from %s and writing to %s', cli.args.filename, cli.args.output)
 ```
+
+# Testing, and Linting, and Formatting (oh my!)
+
+We use nose2, flake8, and yapf to test, lint, and format code. You can use the `pytest` and `pyformat` subcommands to run these tests:
+
+### Testing and Linting
+
+    qmk pytest
+
+### Formatting
+
+    qmk pyformat
+
+## Formatting Details
+
+We use [yapf](https://github.com/google/yapf) to automatically format code. Our configuration is in the `[yapf]` section of `setup.cfg`.
+
+?> Tip- Many editors can use yapf as a plugin to automatically format code as you type.
+
+## Testing Details
+
+Our tests can be found in `lib/python/qmk/tests/`. You will find both unit and integration tests in this directory. We hope you will write both unit and integration tests for your code, but if you do not please favor integration tests. 
+
+If your PR does not include a comprehensive set of tests please add comments like this to your code so that other people know where they can help:
+
+    # TODO(unassigned/<yourGithubUsername>): Write <unit|integration> tests
+
+We use [nose2](https://nose2.readthedocs.io/en/latest/getting_started.html) to run our tests. You can refer to the nose2 documentation for more details on what you can do in your test functions.
+
+## Linting Details
+
+We use flake8 to lint our code. Your code should pass flake8 before you open a PR. This will be checked when you run `qmk pytest` and by CI when you submit a PR.