format code according to conventions [skip ci]

* Clean up includes for glcdfont headers

* Remove pragma once, most of these are not headers

* Missed these

.gitmodules

@@ -1,12 +1,15 @@
 [submodule "lib/chibios"]
 	path = lib/chibios
 	url = https://github.com/qmk/ChibiOS
+	branch = master
 [submodule "lib/chibios-contrib"]
 	path = lib/chibios-contrib
 	url = https://github.com/qmk/ChibiOS-Contrib
+	branch = master
 [submodule "lib/ugfx"]
 	path = lib/ugfx
 	url = https://github.com/qmk/uGFX
+	branch = master
 [submodule "lib/googletest"]
 	path = lib/googletest
 	url = https://github.com/google/googletest

docs/breaking_changes.md

@@ -15,7 +15,7 @@ The next Breaking Change is scheduled for May 30, 2020.
 
 ### Important Dates
 
-* [x] 2019 Feb 29 - `future` is created. It will be rebased weekly.
+* [x] 2020 Feb 29 - `future` is created. It will be rebased weekly.
 * [ ] 2020 May 2 - `future` closed to new PR's.
 * [ ] 2020 May 2 - Call for testers.
 * [ ] 2020 May 28 - `master` is locked, no PR's merged.

docs/ws2812_driver.md

@@ -15,7 +15,7 @@ These LEDs are called "addressable" because instead of using a wire per color, e
 | bit bang | :heavy_check_mark: | :heavy_check_mark: |
 | I2C      | :heavy_check_mark: |                    |
 | SPI      |                    | :heavy_check_mark: |
-| PWM      |                    | Soon™              |
+| PWM      |                    | :heavy_check_mark: |
 
 ## Driver configuration
 
@@ -66,4 +66,36 @@ While not an exhaustive list, the following table provides the scenarios that ha
 | f103 | A7 :heavy_check_mark: | B15 :heavy_check_mark: | N/A |
 | f303 | A7 :heavy_check_mark: B5 :heavy_check_mark:  | B15 :heavy_check_mark: | B5 :heavy_check_mark: |
 
-*Other supported ChibiOS boards and/or pins may function, it will be highly chip and configuration dependent.*
+*Other supported ChibiOS boards and/or pins may function, it will be highly chip and configuration dependent.*
+
+### PWM
+
+Targeting STM32 boards where WS2812 support is offloaded to an PWM timer and DMA stream. The advantage is that the use of DMA offloads processing of the WS2812 protocol from the MCU. To configure it, add this to your rules.mk:
+
+```make
+WS2812_DRIVER = pwm
+```
+
+Configure the hardware via your config.h:
+```c
+#define WS2812_PWM_DRIVER PWMD2  // default: PWMD2
+#define WS2812_PWM_CHANNEL 2  // default: 2
+#define WS2812_PWM_PAL_MODE 2  // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#define WS2812_DMA_CHANNEL 2  // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+```
+
+You must also turn on the PWM feature in your halconf.h and mcuconf.h
+
+#### Testing Notes
+
+While not an exhaustive list, the following table provides the scenarios that have been partially validated:
+
+| | Status |
+|-|-|
+| f072 | ? |
+| f103 | :heavy_check_mark: |
+| f303 | :heavy_check_mark: |
+| f401/f411 | :heavy_check_mark: |
+
+*Other supported ChibiOS boards and/or pins may function, it will be highly chip and configuration dependent.*

drivers/arm/ws2812_pwm.c

@@ -1 +1,207 @@
-#error("NOT SUPPORTED")
+#include "ws2812.h"
+#include "quantum.h"
+#include "hal.h"
+
+/* Adapted from https://github.com/joewa/WS2812-LED-Driver_ChibiOS/ */
+
+#ifdef RGBW
+#    error "RGBW not supported"
+#endif
+
+#ifndef WS2812_PWM_DRIVER
+#    define WS2812_PWM_DRIVER PWMD2  // TIMx
+#endif
+#ifndef WS2812_PWM_CHANNEL
+#    define WS2812_PWM_CHANNEL 2  // Channel
+#endif
+#ifndef WS2812_PWM_PAL_MODE
+#    define WS2812_PWM_PAL_MODE 2  // DI Pin's alternate function value
+#endif
+#ifndef WS2812_DMA_STREAM
+#    define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA Stream for TIMx_UP
+#endif
+#ifndef WS2812_DMA_CHANNEL
+#    define WS2812_DMA_CHANNEL 2  // DMA Channel for TIMx_UP
+#endif
+
+#ifndef WS2812_PWM_TARGET_PERIOD
+//#    define WS2812_PWM_TARGET_PERIOD 800000 // Original code is 800k...?
+#    define WS2812_PWM_TARGET_PERIOD 80000  // TODO: work out why 10x less on f303/f4x1
+#endif
+
+/* --- PRIVATE CONSTANTS ---------------------------------------------------- */
+
+#define WS2812_PWM_FREQUENCY (STM32_SYSCLK / 2)                             /**< Clock frequency of PWM, must be valid with respect to system clock! */
+#define WS2812_PWM_PERIOD (WS2812_PWM_FREQUENCY / WS2812_PWM_TARGET_PERIOD) /**< Clock period in ticks. 1 / 800kHz = 1.25 uS (as per datasheet) */
+
+/**
+ * @brief   Number of bit-periods to hold the data line low at the end of a frame
+ *
+ * The reset period for each frame must be at least 50 uS; so we add in 50 bit-times
+ * of zeroes at the end. (50 bits)*(1.25 uS/bit) = 62.5 uS, which gives us some
+ * slack in the timing requirements
+ */
+#define WS2812_RESET_BIT_N (50)
+#define WS2812_COLOR_BIT_N (RGBLED_NUM * 24)                   /**< Number of data bits */
+#define WS2812_BIT_N (WS2812_COLOR_BIT_N + WS2812_RESET_BIT_N) /**< Total number of bits in a frame */
+
+/**
+ * @brief   High period for a zero, in ticks
+ *
+ * Per the datasheet:
+ * WS2812:
+ * - T0H: 200 nS to 500 nS, inclusive
+ * - T0L: 650 nS to 950 nS, inclusive
+ * WS2812B:
+ * - T0H: 200 nS to 500 nS, inclusive
+ * - T0L: 750 nS to 1050 nS, inclusive
+ *
+ * The duty cycle is calculated for a high period of 350 nS.
+ */
+#define WS2812_DUTYCYCLE_0 (WS2812_PWM_FREQUENCY / (1000000000 / 350))
+
+/**
+ * @brief   High period for a one, in ticks
+ *
+ * Per the datasheet:
+ * WS2812:
+ * - T1H: 550 nS to 850 nS, inclusive
+ * - T1L: 450 nS to 750 nS, inclusive
+ * WS2812B:
+ * - T1H: 750 nS to 1050 nS, inclusive
+ * - T1L: 200 nS to 500 nS, inclusive
+ *
+ * The duty cycle is calculated for a high period of 800 nS.
+ * This is in the middle of the specifications of the WS2812 and WS2812B.
+ */
+#define WS2812_DUTYCYCLE_1 (WS2812_PWM_FREQUENCY / (1000000000 / 800))
+
+/* --- PRIVATE MACROS ------------------------------------------------------- */
+
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given bit
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] byte:                 The byte number [0, 2]
+ * @param[in] bit:                  The bit number [0, 7]
+ *
+ * @return                          The bit index
+ */
+#define WS2812_BIT(led, byte, bit) (24 * (led) + 8 * (byte) + (7 - (bit)))
+
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given red bit
+ *
+ * @note    The red byte is the middle byte in the color packet
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] bit:                  The bit number [0, 7]
+ *
+ * @return                          The bit index
+ */
+#define WS2812_RED_BIT(led, bit) WS2812_BIT((led), 1, (bit))
+
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given green bit
+ *
+ * @note    The red byte is the first byte in the color packet
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] bit:                  The bit number [0, 7]
+ *
+ * @return                          The bit index
+ */
+#define WS2812_GREEN_BIT(led, bit) WS2812_BIT((led), 0, (bit))
+
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given blue bit
+ *
+ * @note    The red byte is the last byte in the color packet
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] bit:                  The bit index [0, 7]
+ *
+ * @return                          The bit index
+ */
+#define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 2, (bit))
+
+/* --- PRIVATE VARIABLES ---------------------------------------------------- */
+
+static uint32_t ws2812_frame_buffer[WS2812_BIT_N + 1]; /**< Buffer for a frame */
+
+/* --- PUBLIC FUNCTIONS ----------------------------------------------------- */
+/*
+ * Gedanke: Double-buffer type transactions: double buffer transfers using two memory pointers for
+the memory (while the DMA is reading/writing from/to a buffer, the application can
+write/read to/from the other buffer).
+ */
+
+void ws2812_init(void) {
+    // Initialize led frame buffer
+    uint32_t i;
+    for (i = 0; i < WS2812_COLOR_BIT_N; i++) ws2812_frame_buffer[i] = WS2812_DUTYCYCLE_0;      // All color bits are zero duty cycle
+    for (i = 0; i < WS2812_RESET_BIT_N; i++) ws2812_frame_buffer[i + WS2812_COLOR_BIT_N] = 0;  // All reset bits are zero
+
+#if defined(USE_GPIOV1)
+    palSetLineMode(RGB_DI_PIN, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
+#else
+    palSetLineMode(RGB_DI_PIN, PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_STM32_OSPEED_HIGHEST | PAL_STM32_PUPDR_FLOATING);
+#endif
+
+    // PWM Configuration
+    //#pragma GCC diagnostic ignored "-Woverride-init"  // Turn off override-init warning for this struct. We use the overriding ability to set a "default" channel config
+    static const PWMConfig ws2812_pwm_config = {
+        .frequency = WS2812_PWM_FREQUENCY,
+        .period    = WS2812_PWM_PERIOD,  // Mit dieser Periode wird UDE-Event erzeugt und ein neuer Wert (Länge WS2812_BIT_N) vom DMA ins CCR geschrieben
+        .callback  = NULL,
+        .channels =
+            {
+                [0 ... 3]                = {.mode = PWM_OUTPUT_DISABLED, .callback = NULL},     // Channels default to disabled
+                [WS2812_PWM_CHANNEL - 1] = {.mode = PWM_OUTPUT_ACTIVE_HIGH, .callback = NULL},  // Turn on the channel we care about
+            },
+        .cr2  = 0,
+        .dier = TIM_DIER_UDE,  // DMA on update event for next period
+    };
+    //#pragma GCC diagnostic pop  // Restore command-line warning options
+
+    // Configure DMA
+    // dmaInit(); // Joe added this
+    dmaStreamAlloc(WS2812_DMA_STREAM - STM32_DMA1_STREAM1, 10, NULL, NULL);
+    dmaStreamSetPeripheral(WS2812_DMA_STREAM, &(WS2812_PWM_DRIVER.tim->CCR[WS2812_PWM_CHANNEL - 1]));  // Ziel ist der An-Zeit im Cap-Comp-Register
+    dmaStreamSetMemory0(WS2812_DMA_STREAM, ws2812_frame_buffer);
+    dmaStreamSetTransactionSize(WS2812_DMA_STREAM, WS2812_BIT_N);
+    dmaStreamSetMode(WS2812_DMA_STREAM, STM32_DMA_CR_CHSEL(WS2812_DMA_CHANNEL) | STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_MINC | STM32_DMA_CR_CIRC | STM32_DMA_CR_PL(3));
+    // M2P: Memory 2 Periph; PL: Priority Level
+
+    // Start DMA
+    dmaStreamEnable(WS2812_DMA_STREAM);
+
+    // Configure PWM
+    // NOTE: It's required that preload be enabled on the timer channel CCR register. This is currently enabled in the
+    // ChibiOS driver code, so we don't have to do anything special to the timer. If we did, we'd have to start the timer,
+    // disable counting, enable the channel, and then make whatever configuration changes we need.
+    pwmStart(&WS2812_PWM_DRIVER, &ws2812_pwm_config);
+    pwmEnableChannel(&WS2812_PWM_DRIVER, WS2812_PWM_CHANNEL - 1, 0);  // Initial period is 0; output will be low until first duty cycle is DMA'd in
+}
+
+void ws2812_write_led(uint16_t led_number, uint8_t r, uint8_t g, uint8_t b) {
+    // Write color to frame buffer
+    for (uint8_t bit = 0; bit < 8; bit++) {
+        ws2812_frame_buffer[WS2812_RED_BIT(led_number, bit)]   = ((r >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
+        ws2812_frame_buffer[WS2812_GREEN_BIT(led_number, bit)] = ((g >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
+        ws2812_frame_buffer[WS2812_BLUE_BIT(led_number, bit)]  = ((b >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
+    }
+}
+
+// Setleds for standard RGB
+void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) {
+    static bool s_init = false;
+    if (!s_init) {
+        ws2812_init();
+        s_init = true;
+    }
+
+    for (uint16_t i = 0; i < leds; i++) {
+        ws2812_write_led(i, ledarray[i].r, ledarray[i].g, ledarray[i].b);
+    }
+}

drivers/avr/glcdfont.c

@@ -1,17 +1,7 @@
 // This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
 // See gfxfont.h for newer custom bitmap font info.
 
-#ifndef FONT5X7_H
-#define FONT5X7_H
-
-#ifdef __AVR__
-#    include <avr/io.h>
-#    include <avr/pgmspace.h>
-#elif defined(ESP8266)
-#    include <pgmspace.h>
-#else
-#    define PROGMEM
-#endif
+#include "progmem.h"
 
 // Standard ASCII 5x7 font
 
@@ -31,4 +21,3 @@ static const unsigned char font[] PROGMEM = {
     0x14, 0x14, 0x14, 0xF4, 0x14, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x00, 0x00, 0x1F, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x14, 0x00, 0x00, 0x00, 0xFC, 0x14, 0x00, 0x00, 0xF0, 0x10, 0xF0, 0x10, 0x10, 0xFF, 0x10, 0xFF, 0x14, 0x14, 0x14, 0xFF, 0x14, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x10, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x38, 0x44, 0x44, 0x38, 0x44, 0xFC, 0x4A, 0x4A, 0x4A, 0x34,                                                                                                                                                                                                                                                                                                                                                                                                       // sharp-s or beta
     0x7E, 0x02, 0x02, 0x06, 0x06, 0x02, 0x7E, 0x02, 0x7E, 0x02, 0x63, 0x55, 0x49, 0x41, 0x63, 0x38, 0x44, 0x44, 0x3C, 0x04, 0x40, 0x7E, 0x20, 0x1E, 0x20, 0x06, 0x02, 0x7E, 0x02, 0x02, 0x99, 0xA5, 0xE7, 0xA5, 0x99, 0x1C, 0x2A, 0x49, 0x2A, 0x1C, 0x4C, 0x72, 0x01, 0x72, 0x4C, 0x30, 0x4A, 0x4D, 0x4D, 0x30, 0x30, 0x48, 0x78, 0x48, 0x30, 0xBC, 0x62, 0x5A, 0x46, 0x3D, 0x3E, 0x49, 0x49, 0x49, 0x00, 0x7E, 0x01, 0x01, 0x01, 0x7E, 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 0x44, 0x44, 0x5F, 0x44, 0x44, 0x40, 0x51, 0x4A, 0x44, 0x40, 0x40, 0x44, 0x4A, 0x51, 0x40, 0x00, 0x00, 0xFF, 0x01, 0x03, 0xE0, 0x80, 0xFF, 0x00, 0x00, 0x08, 0x08, 0x6B, 0x6B, 0x08, 0x36, 0x12, 0x36, 0x24, 0x36, 0x06, 0x0F, 0x09, 0x0F, 0x06, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00, 0x30, 0x40, 0xFF, 0x01, 0x01, 0x00, 0x1F, 0x01, 0x01, 0x1E, 0x00, 0x19, 0x1D, 0x17, 0x12, 0x00, 0x3C, 0x3C, 0x3C, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00  // #255 NBSP
 };
-#endif  // FONT5X7_H

drivers/boards/ld/MK20DX256.ld

@@ -1,101 +0,0 @@
-/*
- * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
- *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * MK20DX256 memory setup.
- */
-MEMORY
-{
-  flash0   : org = 0x00000000, len = 0x400
-  flash1   : org = 0x00000400, len = 0x10
-  flash2   : org = 0x00000410, len = 256k - 0x410
-  flash3   : org = 0x00000000, len = 0
-  flash4   : org = 0x00000000, len = 0
-  flash5   : org = 0x00000000, len = 0
-  flash6   : org = 0x00000000, len = 0
-  flash7   : org = 0x00000000, len = 0
-  ram0     : org = 0x1FFF8000, len = 64k
-  ram1     : org = 0x00000000, len = 0
-  ram2     : org = 0x00000000, len = 0
-  ram3     : org = 0x00000000, len = 0
-  ram4     : org = 0x00000000, len = 0
-  ram5     : org = 0x00000000, len = 0
-  ram6     : org = 0x00000000, len = 0
-  ram7     : org = 0x00000000, len = 0
-}
-
-/* Flash region for the configuration bytes.*/
-SECTIONS
-{
-  .cfmprotect : ALIGN(4) SUBALIGN(4)
-  {
-    KEEP(*(.cfmconfig))
-  } > flash1
-}
-
-/* For each data/text section two region are defined, a virtual region
-   and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash0);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash2);
-REGION_ALIAS("XTORS_FLASH_LMA", flash2);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash2);
-REGION_ALIAS("TEXT_FLASH_LMA", flash2);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash2);
-REGION_ALIAS("RODATA_FLASH_LMA", flash2);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash2);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
-   of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
-   the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash2);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld

drivers/oled/glcdfont.c

@@ -1,13 +1,4 @@
-#pragma once
-
-#ifdef __AVR__
-#    include <avr/io.h>
-#    include <avr/pgmspace.h>
-#elif defined(ESP8266)
-#    include <pgmspace.h>
-#else
-#    define PROGMEM
-#endif
+#include "progmem.h"
 
 // Helidox 8x6 font with QMK Firmware Logo
 // Online editor: http://teripom.x0.com/

drivers/oled/oled_driver.c

@@ -22,15 +22,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include <string.h>
 
-#if defined(__AVR__)
-#    include <avr/io.h>
-#    include <avr/pgmspace.h>
-#elif defined(ESP8266)
-#    include <pgmspace.h>
-#else  // defined(ESP8266)
-#    define PROGMEM
+#include "progmem.h"
+#ifndef __AVR__
 #    define memcpy_P(des, src, len) memcpy(des, src, len)
-#endif  // defined(__AVR__)
+#endif
 
 // Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
 // for SH1106: https://www.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf

keyboards/claw44/lib/glcdfont.c

@@ -1,17 +1,7 @@
 // This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
 // See gfxfont.h for newer custom bitmap font info.
 
-#ifndef FONT5X7_H
-#define FONT5X7_H
-
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#elif defined(ESP8266)
- #include <pgmspace.h>
-#else
- #define PROGMEM
-#endif
+#include "progmem.h"
 
 // Standard ASCII 5x7 font
 const unsigned char font[] PROGMEM = {
@@ -240,4 +230,3 @@ const unsigned char font[] PROGMEM = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 };
-#endif // FONT5X7_H

keyboards/comet46/lib/glcdfont.c

@@ -1,17 +1,7 @@
 // This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
 // See gfxfont.h for newer custom bitmap font info.
 
-#ifndef FONT5X7_H
-#define FONT5X7_H
-
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#elif defined(ESP8266)
- #include <pgmspace.h>
-#else
- #define PROGMEM
-#endif
+#include "progmem.h"
 
 // Standard ASCII 5x7 font
 
@@ -145,4 +135,3 @@ const unsigned char font[] PROGMEM = {
   0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
   0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00
 };
-#endif // FONT5X7_H

keyboards/comet46/lib/keylogger.c

@@ -1,11 +1,5 @@
 #include <stdio.h>
-
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#else
- #define PROGMEM
-#endif
+#include "progmem.h"
 
 #define NUM_USB_HID_KEYCODES 255
 #define LEN_KEYCODE_STR 4

keyboards/crkbd/keymaps/drashna/glcdfont.c

@@ -1,13 +1,4 @@
-#pragma once
-
-#ifdef __AVR__
-#    include <avr/io.h>
-#    include <avr/pgmspace.h>
-#elif defined(ESP8266)
-#    include <pgmspace.h>
-#else
-#    define PROGMEM
-#endif
+#include "progmem.h"
 
 // Corne 8x6 font with QMK Firmware Logo
 // Online editor: https://helixfonteditor.netlify.com/

keyboards/crkbd/keymaps/kidbrazil/glcdfont.c

@@ -1,17 +1,7 @@
 // This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
 // See gfxfont.h for newer custom bitmap font info.
 
-#ifndef FONT5X7_H
-#define FONT5X7_H
-
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#elif defined(ESP8266)
- #include <pgmspace.h>
-#else
- #define PROGMEM
-#endif
+#include "progmem.h"
 
 // Standard ASCII 5x7 font
 const unsigned char font[] PROGMEM = {
@@ -240,4 +230,3 @@ const unsigned char font[] PROGMEM = {
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 };
-#endif // FONT5X7_H

keyboards/crkbd/keymaps/rpbaptist/glcdfont.c

@@ -1,13 +1,4 @@
-#pragma once
-
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#elif defined(ESP8266)
- #include <pgmspace.h>
-#else
- #define PROGMEM
-#endif
+#include "progmem.h"
 
 // Helidox 8x6 font with QMK Firmware Logo
 // Online editor: http://teripom.x0.com/

keyboards/crkbd/keymaps/soundmonster/glcdfont.c

@@ -1,13 +1,4 @@
-#pragma once
-
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#elif defined(ESP8266)
- #include <pgmspace.h>
-#else
- #define PROGMEM
-#endif
+#include "progmem.h"
 
 // Corne 8x6 font with QMK Firmware Logo
 // Online editor: https://helixfonteditor.netlify.com/

keyboards/crkbd/lib/glcdfont.c

@@ -1,17 +1,7 @@
 // This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
 // See gfxfont.h for newer custom bitmap font info.
 
-#ifndef FONT5X7_H
-#define FONT5X7_H
-
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#elif defined(ESP8266)
- #include <pgmspace.h>
-#else
- #define PROGMEM
-#endif
+#include "progmem.h"
 
 // Standard ASCII 5x7 font
 const unsigned char font[] PROGMEM = {
@@ -240,4 +230,3 @@ const unsigned char font[] PROGMEM = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 };
-#endif // FONT5X7_H

keyboards/gergo/keymaps/oled/glcdfont.c

@@ -1,7 +1,6 @@
 // 'loveLain', 128x32px
 
-#include <avr/io.h>
-#include <avr/pgmspace.h>
+#include "progmem.h"
 
 static const unsigned char font[] PROGMEM = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,

keyboards/handwired/bluepill/ld/MKL26Z64.ld

@@ -1,105 +0,0 @@
-/*
- * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
- *           (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * KL26Z64 memory setup.
- */
-MEMORY
-{
-  flash0   : org = 0x00000000, len = 0x100
-  flash1   : org = 0x00000400, len = 0x10
-  flash2   : org = 0x00000410, len = 62k - 0x410
-  flash3   : org = 0x0000F800, len = 2k
-  flash4   : org = 0x00000000, len = 0
-  flash5   : org = 0x00000000, len = 0
-  flash6   : org = 0x00000000, len = 0
-  flash7   : org = 0x00000000, len = 0
-  ram0     : org = 0x1FFFF800, len = 8k
-  ram1     : org = 0x00000000, len = 0
-  ram2     : org = 0x00000000, len = 0
-  ram3     : org = 0x00000000, len = 0
-  ram4     : org = 0x00000000, len = 0
-  ram5     : org = 0x00000000, len = 0
-  ram6     : org = 0x00000000, len = 0
-  ram7     : org = 0x00000000, len = 0
-}
-
-/* Flash region for the configuration bytes.*/
-SECTIONS
-{
-  .cfmprotect : ALIGN(4) SUBALIGN(4)
-  {
-    KEEP(*(.cfmconfig))
-  } > flash1
-}
-
-/* For each data/text section two region are defined, a virtual region
-   and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash0);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash2);
-REGION_ALIAS("XTORS_FLASH_LMA", flash2);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash2);
-REGION_ALIAS("TEXT_FLASH_LMA", flash2);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash2);
-REGION_ALIAS("RODATA_FLASH_LMA", flash2);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash2);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
-   of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
-   the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash2);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-__eeprom_workarea_start__ = ORIGIN(flash3);
-__eeprom_workarea_size__  = LENGTH(flash3);
-__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld

keyboards/handwired/onekey/teensy_lc/rules.mk

@@ -1,5 +1,6 @@
 # MCU name
 MCU = MKL26Z64
+USE_CHIBIOS_CONTRIB = yes
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/handwired/owlet60/keymaps/oled_testing/customfont.c

@@ -1,13 +1,4 @@
-#pragma once
-
-#ifdef __AVR__
-#    include <avr/io.h>
-#    include <avr/pgmspace.h>
-#elif defined(ESP8266)
-#    include <pgmspace.h>
-#else
-#    define PROGMEM
-#endif
+#include "progmem.h"
 
 // Helidox 8x6 font with QMK Firmware Logo
 // Online editor: http://teripom.x0.com/

keyboards/helix/common/glcdfont.c

@@ -1,17 +1,7 @@
 // This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
 // See gfxfont.h for newer custom bitmap font info.
 
-#ifndef FONT5X7_H
-#define FONT5X7_H
-
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#elif defined(ESP8266)
- #include <pgmspace.h>
-#else
- #define PROGMEM
-#endif
+#include "progmem.h"
 
 // Standard ASCII 5x7 font
 
@@ -241,4 +231,3 @@ static const unsigned char font[] PROGMEM = {
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
-#endif // FONT5X7_H

keyboards/helix/rev2/keymaps/froggy/helixfont.h

@@ -1,17 +1,9 @@
 // This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
 // See gfxfont.h for newer custom bitmap font info.
 
-#ifndef FONT5X7_H
-#define FONT5X7_H
+#pragma once
 
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#elif defined(ESP8266)
- #include <pgmspace.h>
-#else
- #define PROGMEM
-#endif
+#include "progmem.h"
 
 // Standard ASCII 5x7 font
 
@@ -241,4 +233,3 @@ static const unsigned char font[] PROGMEM = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
-#endif // FONT5X7_H

keyboards/lily58/lib/glcdfont.c

@@ -1,17 +1,7 @@
 // This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
 // See gfxfont.h for newer custom bitmap font info.
 
-#ifndef FONT5X7_H
-#define FONT5X7_H
-
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#elif defined(ESP8266)
- #include <pgmspace.h>
-#else
- #define PROGMEM
-#endif
+#include "progmem.h"
 
 // Standard ASCII 5x7 font
 const unsigned char font[] PROGMEM = {
@@ -240,4 +230,3 @@ const unsigned char font[] PROGMEM = {
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 };
-#endif // FONT5X7_H

keyboards/orthodox/common/glcdfont.c

@@ -1,17 +1,7 @@
 // This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
 // See gfxfont.h for newer custom bitmap font info.
 
-#ifndef FONT5X7_H
-#define FONT5X7_H
-
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#elif defined(ESP8266)
- #include <pgmspace.h>
-#else
- #define PROGMEM
-#endif
+#include "progmem.h"
 
 // Standard ASCII 5x7 font
 
@@ -273,4 +263,3 @@ static const unsigned char font[] PROGMEM = {
 	0x00, 0x3C, 0x3C, 0x3C, 0x3C,
 	0x00, 0x00, 0x00, 0x00, 0x00  // #255 NBSP
 };
-#endif // FONT5X7_H

keyboards/primekb/prime_m/config.h

@@ -1,5 +1,6 @@
 /*
 Copyright 2018 Jumail Mundekkat
+Copyright 2020 Holten Campbell
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -20,8 +21,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x4024
+#define VENDOR_ID       0x5052 // "PR"
+#define PRODUCT_ID      0x504D // "PM"
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    PrimeKB
 #define PRODUCT         Prime_M

keyboards/primekb/prime_m/keymaps/default/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2018 Jumail Mundekkat
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/primekb/prime_m/keymaps/default/keymap.c

@@ -15,12 +15,6 @@
  */
 #include QMK_KEYBOARD_H
 
-// Defines the keycodes used by our macros in process_record_user
-enum custom_keycodes {
-  QMKBEST = SAFE_RANGE,
-  QMKURL
-};
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	[0] = LAYOUT_ortho_5x6(
 		KC_ESC,  KC_LPRN, KC_RPRN, KC_PSLS, KC_PAST, LT(2, KC_BSPC),
@@ -46,37 +40,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		_______, _______, _______, _______, KC_MUTE, KC_VOLD
     )
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QMKBEST:
-      if (record->event.pressed) {
-        // when keycode QMKBEST is pressed
-        SEND_STRING("QMK is the best thing ever!");
-      } else {
-        // when keycode QMKBEST is released
-      }
-      break;
-    case QMKURL:
-      if (record->event.pressed) {
-        // when keycode QMKURL is pressed
-        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
-      } else {
-        // when keycode QMKURL is released
-      }
-      break;
-  }
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/primekb/prime_m/keymaps/default/readme.md

@@ -1 +1 @@
-# The default keymap for prime_m
+# The default keymap for Prime_M

keyboards/primekb/prime_m/keymaps/numpad/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2018 Jumail Mundekkat
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here