Compare commits
1 Commits
| Author | SHA1 | Date | |
|---|---|---|---|
 skullY
|
a380937f1f |
@@ -557,55 +557,38 @@ endef
|
||||
# Let's match everything, we handle all the rule parsing ourselves
|
||||
.PHONY: %
|
||||
%:
|
||||
# Check if we have the CMP tool installed
|
||||
cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
|
||||
# Ensure that python3 is installed. This check can be removed after python is used in more places.
|
||||
if ! python3 --version 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi
|
||||
# Check if the submodules are dirty, and display a warning if they are
|
||||
ifndef SKIP_GIT
|
||||
if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 50 --init lib/chibios; fi
|
||||
if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --depth 50 --init lib/chibios-contrib; fi
|
||||
if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --depth 50 --init lib/ugfx; fi
|
||||
if [ ! -e lib/lufa ]; then git submodule sync lib/lufa && git submodule update --depth 50 --init lib/lufa; fi
|
||||
git submodule status --recursive 2>/dev/null | \
|
||||
while IFS= read -r x; do \
|
||||
case "$$x" in \
|
||||
\ *) ;; \
|
||||
*) printf "$(MSG_SUBMODULE_DIRTY)";break;; \
|
||||
esac \
|
||||
done
|
||||
endif
|
||||
rm -f $(ERROR_FILE) > /dev/null 2>&1
|
||||
$(eval $(call PARSE_RULE,$@))
|
||||
$(eval $(call SET_SILENT_MODE))
|
||||
# Run all the commands in the same shell, notice the + at the first line
|
||||
# it has to be there to allow parallel execution of the submake
|
||||
# This always tries to compile everything, even if error occurs in the middle
|
||||
# But we return the error code at the end, to trigger travis failures
|
||||
# The sort at this point is to remove duplicates
|
||||
$(foreach COMMAND,$(sort $(COMMANDS)),$(RUN_COMMAND))
|
||||
if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
|
||||
$(foreach TEST,$(sort $(TESTS)),$(RUN_TEST))
|
||||
if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
|
||||
# # Check if we have the CMP tool installed
|
||||
# cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
|
||||
# # Ensure that python3 is installed. This check can be removed after python is used in more places.
|
||||
# if ! python3 --version 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi
|
||||
# # Check if the submodules are dirty, and display a warning if they are
|
||||
#ifndef SKIP_GIT
|
||||
# if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 50 --init lib/chibios; fi
|
||||
# if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --depth 50 --init lib/chibios-contrib; fi
|
||||
# if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --depth 50 --init lib/ugfx; fi
|
||||
# if [ ! -e lib/lufa ]; then git submodule sync lib/lufa && git submodule update --depth 50 --init lib/lufa; fi
|
||||
# git submodule status --recursive 2>/dev/null | \
|
||||
# while IFS= read -r x; do \
|
||||
# case "$$x" in \
|
||||
# \ *) ;; \
|
||||
# *) printf "$(MSG_SUBMODULE_DIRTY)";break;; \
|
||||
# esac \
|
||||
# done
|
||||
#endif
|
||||
# rm -f $(ERROR_FILE) > /dev/null 2>&1
|
||||
# $(eval $(call PARSE_RULE,$@))
|
||||
# $(eval $(call SET_SILENT_MODE))
|
||||
# # Run all the commands in the same shell, notice the + at the first line
|
||||
# # it has to be there to allow parallel execution of the submake
|
||||
# # This always tries to compile everything, even if error occurs in the middle
|
||||
# # But we return the error code at the end, to trigger travis failures
|
||||
# # The sort at this point is to remove duplicates
|
||||
# $(foreach COMMAND,$(sort $(COMMANDS)),$(RUN_COMMAND))
|
||||
# if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
|
||||
# $(foreach TEST,$(sort $(TESTS)),$(RUN_TEST))
|
||||
# if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
|
||||
|
||||
# These no longer work because of the colon system
|
||||
|
||||
# All should compile everything
|
||||
# .PHONY: all
|
||||
# all: all-keyboards test-all
|
||||
|
||||
# Define some shortcuts, mostly for compatibility with the old syntax
|
||||
# .PHONY: all-keyboards
|
||||
# all-keyboards: all\:all\:all
|
||||
|
||||
# .PHONY: all-keyboards-defaults
|
||||
# all-keyboards-defaults: all\:default
|
||||
|
||||
# .PHONY: test
|
||||
# test: test-all
|
||||
|
||||
# .PHONY: test-clean
|
||||
# test-clean: test-all-clean
|
||||
bin/qmk makehandler $@
|
||||
|
||||
lib/%:
|
||||
git submodule sync $?
|
||||
|
||||
@@ -61,7 +61,7 @@ void encoder_update_user(uint8_t index, bool clockwise) {
|
||||
} else {
|
||||
tap_code(KC_PGUP);
|
||||
}
|
||||
} else if (index == 1) { /* Second encoder */
|
||||
} else if (index == 1) { /* Second encoder */
|
||||
if (clockwise) {
|
||||
tap_code(KC_DOWN);
|
||||
} else {
|
||||
|
||||
@@ -1,71 +0,0 @@
|
||||
# 動的マクロ: ランタイムでのマクロの記録および再生
|
||||
|
||||
<!---
|
||||
original document: 0.8.123:docs/feature_dynamic_macros.md
|
||||
git diff 0.8.123 HEAD -- docs/feature_dynamic_macros.md | cat
|
||||
-->
|
||||
|
||||
QMK はその場で作られた一時的なマクロをサポートします。これらを動的マクロと呼びます。それらはユーザがキーボードから定義し、キーボードのプラグを抜くか再起動すると失われます。
|
||||
|
||||
1つまたは2つのマクロに合計128のキー押下を保存できます。RAM をより多く使用してサイズを増やすことができます。
|
||||
|
||||
有効にするには、最初に `rules.mk` に `DYNAMIC_MACRO_ENABLE = yes` を記述します。そして、以下のキーをキーマップに追加します:
|
||||
|
||||
| キー | Alias | 説明 |
|
||||
|------------------|----------|---------------------------------------------------|
|
||||
| `DYN_REC_START1` | `DM_REC1` | マクロ 1 の記録を開始します |
|
||||
| `DYN_REC_START2` | `DM_REC2` | マクロ 2 の記録を開始します |
|
||||
| `DYN_MACRO_PLAY1` | `DM_PLY1` | マクロ 1 を再生します |
|
||||
| `DYN_MACRO_PLAY2` | `DM_PLY2` | マクロ 2 を再生します |
|
||||
| `DYN_REC_STOP` | `DM_RSTP` | 現在記録中のマクロの記録を終了します。 |
|
||||
|
||||
これが必要な全てです。
|
||||
|
||||
マクロの記録を開始するには、`DYN_REC_START1` または `DYN_REC_START2` のどちらかを押します。
|
||||
|
||||
記録を終了するには、`DYN_REC_STOP` レイヤーボタンを押します。
|
||||
|
||||
マクロを再生するには、`DYN_MACRO_PLAY1` あるいは `DYN_MACRO_PLAY2` のどちらかを押します。
|
||||
|
||||
マクロの一部としてマクロを再生することができます。マクロ 1 を記録中にマクロ 2 を再生、またはその逆も問題ありません。ただし、再帰的なマクロ、つまりマクロ 1 を再生するマクロ 1 は作成しないでください。もしそうしてキーボードが反応しなくなった場合は、キーボードを取り外し再び接続します。これを完全に無効にするには、`config.h` ファイルで `DYNAMIC_MACRO_NO_NESTING` を定義します。
|
||||
|
||||
?> 動的マクロの内部の詳細については、`process_dynamic_macro.h` および `process_dynamic_macro.c` ファイルのコメントを読んでください。
|
||||
|
||||
## カスタマイズ
|
||||
|
||||
ある程度のカスタマイズを可能にするオプションがいくつか追加されています。
|
||||
|
||||
| 定義 | デフォルト | 説明 |
|
||||
|----------------------------|----------------|-----------------------------------------------------------------------------------------------------------------|
|
||||
| `DYNAMIC_MACRO_SIZE` | 128 | 動的マクロが使用できるメモリ量を設定します。これは限られたリソースであり、コントローラに依存します。 |
|
||||
| `DYNAMIC_MACRO_USER_CALL` | *定義なし* | これを定義すると、ユーザの `keymap.c` ファイルを使ってマクロが起動されます。 |
|
||||
| `DYNAMIC_MACRO_NO_NESTING` | *定義なし* | これを定義すると、別のマクロからマクロを呼び出す(入れ子になったマクロ)機能を無効にします。 |
|
||||
|
||||
|
||||
記録中にキーを押すたびに LED が点滅し始めた場合は、マクロバッファにマクロを入れるスペースがもう無いことを意味します。マクロを入れるには、他のマクロ(それらは同じバッファを共有します)を短くするか、`config.h` に `DYNAMIC_MACRO_SIZE` 定義を追加することでバッファを増やします(デフォルト値: 128; ヘッダ内のコメントを読んでください)。
|
||||
|
||||
|
||||
### DYNAMIC_MACRO_USER_CALL
|
||||
|
||||
以前のバージョンの動的マクロをお使いの方へ: 専用の `DYN_REC_STOP` キーを使わずに動的マクロキーへのアクセスに使われるレイヤーモディファイアのみを使って、マクロの記録を終了することもまだ可能です。この動作に戻したい場合は、`#define DYNAMIC_MACRO_USER_CALL` を `config.h` に追加し、以下のスニペットを `process_record_user()` 関数の先頭に記述します:
|
||||
|
||||
```c
|
||||
uint16_t macro_kc = (keycode == MO(_DYN) ? DYN_REC_STOP : keycode);
|
||||
|
||||
if (!process_record_dynamic_macro(macro_kc, record)) {
|
||||
return false;
|
||||
}
|
||||
```
|
||||
|
||||
### ユーザフック
|
||||
|
||||
カスタム機能とフィードバックオプションを動的マクロ機能に追加するために使うことができるフックが幾つかあります。これによりある程度のカスタマイズが可能になります。
|
||||
|
||||
direction がどのマクロであるかを示すことに注意してください。`1` がマクロ 1、`-1` がマクロ 2、0 がマクロ無しです。
|
||||
|
||||
* `dynamic_macro_record_start_user(void)` - マクロの記録を開始する時に起動されます。
|
||||
* `dynamic_macro_play_user(int8_t direction)` - マクロを再生する時に起動されます。
|
||||
* `dynamic_macro_record_key_user(int8_t direction, keyrecord_t *record)` - マクロの記録中に各キー押下で起動されます。
|
||||
* `dynamic_macro_record_end_user(int8_t direction)` - マクロの記録を停止した時に起動されます。
|
||||
|
||||
さらに、動的マクロ機能が有効な場合にバックライトを点滅させるために `dynamic_macro_led_blink()` を呼び出すことができます。
|
||||
@@ -66,7 +66,7 @@ void encoder_update_user(uint8_t index, bool clockwise) {
|
||||
} else {
|
||||
tap_code(KC_PGUP);
|
||||
}
|
||||
} else if (index == 1) { /* Second encoder */
|
||||
} else if (index == 1) { /* Second encoder */
|
||||
if (clockwise) {
|
||||
tap_code(KC_DOWN);
|
||||
} else {
|
||||
|
||||
@@ -147,7 +147,7 @@ layer_state_t layer_state_set_user(layer_state_t state) {
|
||||
rgblight_sethsv_at( 0, 0, 0, 0);
|
||||
break;
|
||||
}
|
||||
rgblight_set_effect_range( 1, 5);
|
||||
rgblight_set_effect_range( 1, 4);
|
||||
#endif
|
||||
return state;
|
||||
}
|
||||
|
||||
@@ -20,7 +20,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x36E1
|
||||
#define PRODUCT_ID 0x3060
|
||||
#define DEVICE_VER 0x0007
|
||||
#define MANUFACTURER Salicylic_Acid
|
||||
#define PRODUCT 7skb
|
||||
@@ -52,9 +52,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#define RGB_DI_PIN D3
|
||||
|
||||
#ifndef RGBLED_NUM
|
||||
#define RGBLED_NUM 12
|
||||
#define RGBLED_NUM 10
|
||||
#define RGBLIGHT_SPLIT
|
||||
#define RGBLED_SPLIT { 6, 6 }
|
||||
#define RGBLED_SPLIT { 5, 5 }
|
||||
#endif
|
||||
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,78 +0,0 @@
|
||||
/*
|
||||
Copyright 2015 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xCA04
|
||||
#define PRODUCT_ID 0x0B75
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER CannonKeys
|
||||
#define PRODUCT Obliterated75
|
||||
#define DESCRIPTION Obliterated75 Keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 16
|
||||
|
||||
#define MATRIX_COL_PINS { A5, B10, A3, A2, B0, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
|
||||
#define MATRIX_ROW_PINS { A13, B12, B11, B14, A8, A1 }
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define BACKLIGHT_PIN A6
|
||||
#define BACKLIGHT_PWM_DRIVER PWMD3
|
||||
#define BACKLIGHT_PWM_CHANNEL 1
|
||||
#define BACKLIGHT_PAL_MODE 1
|
||||
#define BACKLIGHT_LEVELS 6
|
||||
#define BACKLIGHT_BREATHING
|
||||
#define BREATHING_PERIOD 6
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGB_DI_PIN B15
|
||||
#define RGBLED_NUM 20
|
||||
#define WS2812_SPI SPID2
|
||||
#define WS2812_SPI_MOSI_PAL_MODE 0
|
||||
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,12 +0,0 @@
|
||||
{
|
||||
"keyboard_name": "Obliterated75",
|
||||
"url": "https://cannonkeys.com",
|
||||
"maintainer": "awkannan",
|
||||
"width": 16,
|
||||
"height": 6.25,
|
||||
"layouts": {
|
||||
"LAYOUT_all": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":15, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"x":13, "y":1.25}, {"x":14, "y":1.25}, {"x":15, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"x":15, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"x":12.75, "y":3.25}, {"label":"Enter", "x":13.75, "y":3.25, "w":1.25}, {"x":15, "y":3.25}, {"x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"x":14, "y":4.25}, {"x":15, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":11.25, "y":5.25, "w":1.25}, {"x":13, "y":5.25}, {"x":14, "y":5.25}, {"x":15, "y":5.25}]
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -1,48 +0,0 @@
|
||||
/*
|
||||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN1,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_BASE] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[_FN1] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, RGB_TOG,
|
||||
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD,
|
||||
BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
BL_INC, BL_DEC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
@@ -1,71 +0,0 @@
|
||||
/*
|
||||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN1,
|
||||
_FN2,
|
||||
_FN3
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_BASE] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[_FN1] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
|
||||
KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, RGB_TOG,
|
||||
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD,
|
||||
BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
BL_INC, BL_DEC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
|
||||
[_FN2] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
[_FN3] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
|
||||
};
|
||||
@@ -1,176 +0,0 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _MCUCONF_H_
|
||||
#define _MCUCONF_H_
|
||||
|
||||
/*
|
||||
* STM32F0xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 3...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F0xx_MCUCONF
|
||||
// #define STM32F070xB
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_HSI14_ENABLED TRUE
|
||||
#define STM32_HSI48_ENABLED FALSE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED FALSE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
|
||||
#define STM32_PREDIV_VALUE 1
|
||||
#define STM32_PLLMUL_VALUE 12
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE STM32_PPRE_DIV1
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_USBSW STM32_USBSW_HSI48
|
||||
#define STM32_CECSW STM32_CECSW_HSI
|
||||
#define STM32_I2C1SW STM32_I2C1SW_HSI
|
||||
#define STM32_USART1SW STM32_USART1SW_PCLK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_IRQ_PRIORITY 2
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* EXT driver system settings.
|
||||
*/
|
||||
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM14 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM14_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_USE_DMA TRUE
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 TRUE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 3
|
||||
#define STM32_SERIAL_USART2_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 TRUE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 2
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
|
||||
|
||||
#endif /* _MCUCONF_H_ */
|
||||
@@ -1 +0,0 @@
|
||||
#include "obliterated75.h"
|
||||
@@ -1,19 +0,0 @@
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_all( \
|
||||
K000, K001, K002, K003, K004, K006, K007, K008, K009, K010, K011, K012, K013, K015, \
|
||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
|
||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \
|
||||
K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \
|
||||
K500, K501, K502, K506, K510, K511, K512, K513, K515 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, KC_NO, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, K015 }, \
|
||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \
|
||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \
|
||||
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \
|
||||
{ K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, KC_NO, K515 } \
|
||||
}
|
||||
@@ -1,10 +0,0 @@
|
||||
# CannonKeys Obliterated75
|
||||
|
||||
* Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)
|
||||
* Hardware Supported: STM32F072CBT6
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make cannonkeys/obliterated75:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
@@ -1,24 +0,0 @@
|
||||
# MCU name
|
||||
MCU = STM32F072
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||
WS2812_DRIVER = spi
|
||||
|
||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||
@@ -65,7 +65,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
// #define RGBLIGHT_SAT_STEP 8
|
||||
// #define RGBLIGHT_VAL_STEP 8
|
||||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
// /*== all animations enable ==*/
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
// /*== or choose animations ==*/
|
||||
|
||||
@@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[LAYER_LOWER] = LAYOUT(
|
||||
KC_CAPS, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
|
||||
_______, _______, _______, _______, _______, _______, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_TILD,
|
||||
_______, KC_APP, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_GRV,
|
||||
_______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_APP, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_GRV,
|
||||
_______, _______, _______, _______, _______, _______
|
||||
),
|
||||
|
||||
|
||||
@@ -1,24 +1,9 @@
|
||||
# bcat's Corne layout
|
||||
|
||||
This is my favorite split ergo layout for typing, featuring the traditional
|
||||
four ortho/ergo layers (Default, Lower, Raise, Adjust). It is loosely inspired
|
||||
by the default Planck (numbers on Lower, symbols on Raise) and Crkbd (Space on
|
||||
left, Enter on right) layouts, but has since been redesigned heavily according
|
||||
to the principles described below:
|
||||
|
||||
* Since most of the modifiers are on the left half, keys frequently pressed
|
||||
together with mods (e.g., numbers, function keys, etc.) are on the Raise layer
|
||||
activated by the right thumb.
|
||||
|
||||
* Navigation can be done on the right half alone, to enable simultaneous
|
||||
left-handed mousing. Additionally, Web pages can be scrolled with Space or
|
||||
Shift+Space on the left half alone, to enable taking notes with the right hand
|
||||
at the same time.
|
||||
|
||||
* Other than Right Shift (which I seldom use), mods aren't rebound on layers.
|
||||
|
||||
* Likewise, Backspace is not rebound on layers to avoid having to let go of
|
||||
layer-switch keys to correct mistakes.
|
||||
This split ergo layout mirrors
|
||||
[my Lily58 layout](https://github.com/qmk/qmk_firmware/tree/master/keyboards/lily58/keymaps/bcat)
|
||||
with the number row removed and RGB controls added. See that layout's docs for
|
||||
more details on the principles that went into the layout.
|
||||
|
||||
## Default layer
|
||||
|
||||
@@ -26,97 +11,20 @@ layer-switch keys to correct mistakes.
|
||||
|
||||
([KLE](http://www.keyboard-layout-editor.com/#/gists/08d9827d916662a9414f48805aa895a5))
|
||||
|
||||
* The alpha keys are a standard QWERTY layout, no funny business there.
|
||||
|
||||
* Tab and Backspace are in familiar locations from my row-staggered boards
|
||||
(almost all of which use HHKB-style split backspace).
|
||||
|
||||
* Likewise, the Ctrl key is in the same place as on my row-staggered boards
|
||||
(where I've been remapping Caps Lock as Ctrl since before even using QMK).
|
||||
|
||||
* There are two Shift keys, because I do use Right Shift on occasion (even
|
||||
though I'm predominately a Left Shift-er).
|
||||
|
||||
* Lower and Raise layer-switch keys are below the left and right thumb,
|
||||
respectively, when resting my fingers on the home row.
|
||||
|
||||
* Space and Enter are on the big thumb keys so they're easy to press.
|
||||
|
||||
* Alt is on the left so I can navigate back (Alt+Raise+H) and forward
|
||||
(Alt+Raise+L) without having to uncomfortably hit two thumb keys on the same
|
||||
half. This puts Super on the right by the process of elimination.
|
||||
|
||||
* Escape shares a mod-tap key with Ctrl, which is convenient for Vim, but not
|
||||
something I'm totally in love with, as even after tweaking `TAPPING_TERM` I
|
||||
still get occasional spurious Esc taps. (I might move Esc up a key and put Tab
|
||||
on a layer, but that'd take some getting used to....)
|
||||
|
||||
## Lower layer
|
||||
|
||||
|
||||
|
||||
|
||||
([KLE](http://www.keyboard-layout-editor.com/#/gists/c3fba5eaa2cd70fdfbdbc0f9e34d3bc0))
|
||||
|
||||
* This could also be called the "symbol layer".
|
||||
|
||||
* Shifted numbers are bound in their usual positions on the top row.
|
||||
|
||||
* Hyphen/Underscore and Equals/Plus are in the right index- and middle-finger
|
||||
columns for easy reach. They share the same relative position as on a
|
||||
row-staggered keyboard, and the shifted versions are physically above the
|
||||
unshifted versions as a mnemonic device.
|
||||
|
||||
* Brackets and braces are placed below the parens for easy recall. Once again,
|
||||
the shifted versions are on the home row and the unshifted versions are on the
|
||||
bottom row.
|
||||
|
||||
* Forward Slash/Pipe and Backtick/Tilde fill out the remaining positions on the
|
||||
right half, with the same relative positions as on a row-staggered HHKB layout.
|
||||
And yup, the shifted versions are above the unshifted versions.
|
||||
|
||||
* Caps Lock is bound in the same position as on an HHKB, for lack of an obvious
|
||||
better location.
|
||||
|
||||
* Some extra keys are placed on the bottom row of the left half, ensuring every
|
||||
key on a TKL has a binding.
|
||||
|
||||
* The left-half home row is reversed for future use. (It's free real estate.)
|
||||
|
||||
## Raise layer
|
||||
|
||||
|
||||
|
||||
([KLE](http://www.keyboard-layout-editor.com/#/gists/08b44355d4ca85d294bad9e2821f91d7))
|
||||
|
||||
* This could also be called the "number layer".
|
||||
|
||||
* Unshifted numbers are bound in their usual positions on the top row.
|
||||
|
||||
* Arrow keys are on VIM-style HJKL keys.
|
||||
|
||||
* Home/End and Page Up/Page Down are in the same column as the arrow keys, but
|
||||
translated down one row. (This means that the comma and period keys are not
|
||||
bound on the number layer, which makes data entry a bit funky. I might add a
|
||||
dedicated numpad layer to compensate.)
|
||||
|
||||
* Function keys F1–F10 take up most of remaining space on the left half, with
|
||||
F11 and F12 spilling over to the right half. (This puts the most used function
|
||||
keys (F1–F5) on the home row.)
|
||||
|
||||
* Insert and Delete are on the rightmost column, because there didn't seem to
|
||||
be a better place to put them.
|
||||
|
||||
## Adjust layer
|
||||
|
||||
|
||||
|
||||
([KLE](http://www.keyboard-layout-editor.com/#/gists/77e7572e077b36a23eb2086017e16fee))
|
||||
|
||||
* Media keys are centered around the ESDF cluster, just like I arrange them on
|
||||
row-staggered keyboards. (It's even more sensible with columnar stagger.)
|
||||
|
||||
* The navigation keys are replaced by RGB controls. Again, this mirrors the
|
||||
positioning I use on my row-staggered keyboards.
|
||||
|
||||
* Finally, reset keys live at the top-left corner of the right half where it's
|
||||
reasonably hard to press them by accident.
|
||||
|
||||
@@ -1,58 +0,0 @@
|
||||
/*
|
||||
Copyright 2019-2020 DMQ Design
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xA455
|
||||
#define PRODUCT_ID 0x0001
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER DMQ Design
|
||||
#define PRODUCT SPIN
|
||||
#define DESCRIPTION The SPIN Macro Pad is a 12 key Macro Pad by DMQ Design with 3 rotary encoders, inspired by the Plaid & RoMac.
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 3
|
||||
#define MATRIX_COLS 5
|
||||
//Matrix is 3x5 instead of 3x4, as the 3 encoders are wired into the matrix
|
||||
|
||||
#define MATRIX_ROW_PINS { F0, F1, F4 }
|
||||
#define MATRIX_COL_PINS { F5, F6, F7, C7, C6 }
|
||||
#define UNUSED_PINS { D5, D2, D1, D0, B7, B3, B2, B0, E6 }
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
//rotary encoder setup
|
||||
#define ENCODERS_PAD_A { B6, B4, D6 }
|
||||
#define ENCODERS_PAD_B { B5, D7, D4 }
|
||||
#define ENCODER_RESOLUTION 4
|
||||
|
||||
//Data pin for the 3 RGB LEDs
|
||||
#define RGB_DI_PIN D3
|
||||
//Number of RGB LEDs
|
||||
#define RGBLED_NUM 3
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
@@ -1,28 +0,0 @@
|
||||
{
|
||||
"keyboard_name": "SPIN",
|
||||
"url": "https://www.DMQdesign.com",
|
||||
"maintainer": "Quarren42",
|
||||
"width": 4.5,
|
||||
"height": 4,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1, "y":0},
|
||||
{"x":2, "y":0},
|
||||
{"x":3.5, "y":0},
|
||||
{"x":0, "y":1},
|
||||
{"x":1, "y":1},
|
||||
{"x":2, "y":1},
|
||||
{"x":3.5, "y":1.5},
|
||||
{"x":0, "y":2},
|
||||
{"x":1, "y":2},
|
||||
{"x":2, "y":2},
|
||||
{"x":3.5, "y":3},
|
||||
{"x":0, "y":3},
|
||||
{"x":1, "y":3},
|
||||
{"x":2, "y":3}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -1,21 +0,0 @@
|
||||
/* Copyright 2019-2020 DMQ Design
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
|
||||
// place overrides here
|
||||
@@ -1,47 +0,0 @@
|
||||
/* Copyright 2019-2020 DMQ Design
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT(/* Base */
|
||||
KC_7, KC_8, KC_9, KC_TRNS,
|
||||
KC_4, KC_5, KC_6, KC_TRNS,
|
||||
KC_1, KC_2, KC_3, KC_TRNS,
|
||||
KC_0, RGB_TOG, KC_ENTER
|
||||
),
|
||||
};
|
||||
|
||||
void encoder_update_user(uint8_t index, bool clockwise) {
|
||||
if (index == 0) { /* First encoder */
|
||||
if (clockwise) {
|
||||
rgblight_increase_hue(); //Cycle through the RGB hue
|
||||
} else {
|
||||
rgblight_decrease_hue();
|
||||
}
|
||||
} else if (index == 1) { /* Second encoder */
|
||||
if (clockwise) {
|
||||
tap_code(KC_VOLU); //Example of using tap_code which lets you use keycodes outside of the keymap
|
||||
} else {
|
||||
tap_code(KC_VOLD);
|
||||
}
|
||||
} else if (index == 2) { /* Third encoder */
|
||||
if (clockwise) {
|
||||
rgblight_increase_val(); //Change brightness on the RGB LEDs
|
||||
} else {
|
||||
rgblight_decrease_val();
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -1 +0,0 @@
|
||||
# The default keymap for the SPIN Macro Pad, it includes basic encoder & rgb functionality.
|
||||
@@ -1,23 +0,0 @@
|
||||
/* Copyright 2019-2020 DMQ Design
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define MIDI_ENABLE_STRICT 1
|
||||
#define MIDI_ADVANCED
|
||||
|
||||
@@ -1,151 +0,0 @@
|
||||
/* Copyright 2019-2020 DMQ Design
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
#include "midi.h"
|
||||
#include "qmk_midi.h"
|
||||
|
||||
enum layers
|
||||
{
|
||||
_BL,
|
||||
_FL,
|
||||
_TL
|
||||
};
|
||||
|
||||
uint8_t currentLayer;
|
||||
|
||||
//The below layers are intentionally empty in order to give a good starting point for how to configure multiple layers.
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_BL] = LAYOUT(/* Base */
|
||||
KC_KP_7, KC_KP_8, KC_KP_9, TO(_BL),
|
||||
KC_KP_4, KC_KP_5, KC_KP_6, TO(_FL),
|
||||
KC_KP_1, KC_KP_2, KC_KP_3, TO(_TL),
|
||||
KC_KP_0, RGB_TOG, RGB_MOD
|
||||
),
|
||||
|
||||
[_FL] = LAYOUT(/* Base */
|
||||
KC_NO, KC_NO, KC_NO, KC_TRNS,
|
||||
KC_NO, KC_NO, KC_NO, KC_TRNS,
|
||||
KC_NO, KC_NO, KC_NO, KC_TRNS,
|
||||
KC_MS_BTN1, KC_NO, KC_MS_BTN2
|
||||
),
|
||||
|
||||
[_TL] = LAYOUT(/* Base */
|
||||
KC_NO, KC_NO, KC_NO, KC_TRNS,
|
||||
KC_NO, KC_NO, KC_NO, KC_TRNS,
|
||||
KC_NO, KC_NO, KC_NO, KC_TRNS,
|
||||
KC_NO, KC_NO, KC_NO
|
||||
)
|
||||
};
|
||||
|
||||
void encoder_update_user(uint8_t index, bool clockwise) {
|
||||
if (index == 0) { /* First encoder */
|
||||
switch (currentLayer) { //break each encoder update into a switch statement for the current layer
|
||||
case _BL:
|
||||
if (clockwise) {
|
||||
rgblight_increase_hue();
|
||||
} else {
|
||||
rgblight_decrease_hue();
|
||||
}
|
||||
break;
|
||||
case _FL:
|
||||
if (clockwise) {
|
||||
midi_send_cc(&midi_device, 0, 0x14, 1);
|
||||
} else {
|
||||
midi_send_cc(&midi_device, 0, 0x15, 1);
|
||||
}
|
||||
break;
|
||||
case _TL:
|
||||
if (clockwise) {
|
||||
midi_send_cc(&midi_device, 0, 0x1A, 1);
|
||||
} else {
|
||||
midi_send_cc(&midi_device, 0, 0x1B, 1);
|
||||
}
|
||||
break;
|
||||
}
|
||||
} else if (index == 1) { /* Second encoder */
|
||||
switch (currentLayer) {
|
||||
case _BL:
|
||||
if (clockwise) {
|
||||
tap_code(KC_VOLU);
|
||||
} else {
|
||||
tap_code(KC_VOLD);
|
||||
}
|
||||
break;
|
||||
case _FL:
|
||||
if (clockwise) {
|
||||
midi_send_cc(&midi_device, 0, 0x16, 1);
|
||||
} else {
|
||||
midi_send_cc(&midi_device, 0, 0x17, 1);
|
||||
}
|
||||
break;
|
||||
case _TL:
|
||||
if (clockwise) {
|
||||
midi_send_cc(&midi_device, 0, 0x1C, 1);
|
||||
} else {
|
||||
midi_send_cc(&midi_device, 0, 0x1D, 1);
|
||||
}
|
||||
break;
|
||||
}
|
||||
} else if (index == 2) { /* Third encoder */
|
||||
switch (currentLayer) {
|
||||
case _BL:
|
||||
if (clockwise) {
|
||||
rgblight_increase_val();
|
||||
} else {
|
||||
rgblight_decrease_val();
|
||||
}
|
||||
break;
|
||||
case _FL:
|
||||
if (clockwise) {
|
||||
midi_send_cc(&midi_device, 0, 0x18, 1);
|
||||
} else {
|
||||
midi_send_cc(&midi_device, 0, 0x19, 1);
|
||||
}
|
||||
break;
|
||||
case _TL:
|
||||
if (clockwise) {
|
||||
midi_send_cc(&midi_device, 0, 0x1E, 1);
|
||||
} else {
|
||||
midi_send_cc(&midi_device, 0, 0x1F, 1);
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
layer_state_t layer_state_set_user(layer_state_t state) { //This will run every time the layer is updated
|
||||
currentLayer = get_highest_layer(state);
|
||||
|
||||
switch (currentLayer) {
|
||||
case _BL:
|
||||
setrgb(RGB_WHITE, &led[0]); //Set the top LED to white for the bottom layer
|
||||
setrgb(0, 0, 0, &led[1]);
|
||||
setrgb(0, 0, 0, &led[2]);
|
||||
break;
|
||||
case _FL:
|
||||
setrgb(0, 0, 0, &led[0]); //Set the middle LED to white for the middle layer
|
||||
setrgb(RGB_WHITE, &led[1]);
|
||||
setrgb(0, 0, 0, &led[2]);
|
||||
break;
|
||||
case _TL:
|
||||
setrgb(0, 0, 0, &led[0]);
|
||||
setrgb(0, 0, 0, &led[1]);
|
||||
setrgb(RGB_WHITE, &led[2]); //Set the bottom LED to white for the top layer
|
||||
break;
|
||||
}
|
||||
rgblight_set();
|
||||
return state;
|
||||
}
|
||||
@@ -1 +0,0 @@
|
||||
# This keymap is intended to demonstrate how to implement different encoder functions dependent on layer, and on how to implement MIDI control with encoders.
|
||||
@@ -1,17 +0,0 @@
|
||||
# SPIN
|
||||
|
||||
|
||||
|
||||
The SPIN Macro Pad is a USB-C, hotswappable Macro Pad with 3 encoders designed by Nick from DMQ Design.
|
||||
|
||||
* Keyboard Maintainer: [Nicholas Junker](https://github.com/Quarren42)
|
||||
* Hardware Supported: SPIN Macro Pad PCB/kit
|
||||
* Hardware Availability: The macro pad is available at [DMQdesign.com](www.dmqdesign.com)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make dmqdesign/spin:default
|
||||
|
||||
I have two example keymaps available, both the default and the encoderlayers keymap which demonstrates using different encoder functions based on the layer chosen.
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
@@ -1,34 +0,0 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = yes # MIDI support
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||
ENCODER_ENABLE = yes # Enable rotary encoder support
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user