Move plaid via keymap to correct location (#9255)

* Branch point for 2020 May 30 Breaking Change

* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)

* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)

* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)

* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)

* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)

* Convert V-USB usbdrv to a submodule (#8321)

* Unify Tap Hold functions and documentation (#8348)

* Changing board names to prevent confusion (#8412)

* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)

* Move spaceman keyboards (#8830)

* Migrate miscellaneous `fn_actions` entries (#8977)

* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)

* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)

* Refactor Lily58 to use split_common (#6260)

* Refactor zinc to use split_common (#7114)

* Add a message if bin/qmk doesn't work (#9000)

* Fix conflicting types for 'tfp_printf' (#8269)

* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)

* Refactor and updates to TKC1800 code (#8472)

* Switch to qmk forks for everything (#9019)

* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)

* Audio enable corrections (2/3) (#8903)

* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)

* Audio enable corrections (Part 4) (#8974)

* Fix typo from PR7114 (#9171)

* Augment future branch Changelogs (#8978)

* Revert "Branch point for 2020 May 30 Breaking Change"

.gitmodules

@@ -12,7 +12,13 @@
 	branch = master
 [submodule "lib/googletest"]
 	path = lib/googletest
-	url = https://github.com/google/googletest
+	url = https://github.com/qmk/googletest
 [submodule "lib/lufa"]
 	path = lib/lufa
 	url = https://github.com/qmk/lufa
+[submodule "lib/vusb"]
+	path = lib/vusb
+	url = https://github.com/qmk/v-usb
+[submodule "lib/printf"]
+	path = lib/printf
+	url = https://github.com/qmk/printf

Makefile

@@ -294,8 +294,8 @@ define PARSE_RULE
         $$(info |  QMK's make format recently changed to use folder locations and colons:)
         $$(info |     make project_folder:keymap[:target])
         $$(info |  Examples:)
-        $$(info |     make planck/rev4:default:dfu)
-        $$(info |     make planck:default)
+        $$(info |     make dz60:default)
+        $$(info |     make planck/rev6:default:flash)
         $$(info |)
     endif
 endef
@@ -562,14 +562,16 @@ endef
 %:
 	# Check if we have the CMP tool installed
 	cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
-	# Ensure that python3 is installed. This check can be removed after python is used in more places.
-	if ! python3 --version 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi
+	# Ensure that bin/qmk works. This will be a failing check after the next develop merge on 2020 Aug 29.
+	if ! bin/qmk hello 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi
 	# Check if the submodules are dirty, and display a warning if they are
 ifndef SKIP_GIT
 	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 50 --init lib/chibios; fi
 	if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --depth 50 --init lib/chibios-contrib; fi
 	if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --depth 50 --init lib/ugfx; fi
 	if [ ! -e lib/lufa ]; then git submodule sync lib/lufa && git submodule update --depth 50 --init lib/lufa; fi
+	if [ ! -e lib/vusb ]; then git submodule sync lib/vusb && git submodule update --depth 50 --init lib/vusb; fi
+	if [ ! -e lib/printf ]; then git submodule sync lib/printf && git submodule update --depth 50 --init lib/printf; fi
 	git submodule status --recursive 2>/dev/null | \
 	while IFS= read -r x; do \
 		case "$$x" in \

Vagrantfile

@@ -89,7 +89,7 @@ Vagrant.configure(2) do |config|
 
   Examples:
      make planck/rev4:default:dfu
-     make planck:default
+     make planck/rev4:default
 
   EOT
 end

docs/ChangeLog/20200530.md

@@ -0,0 +1,239 @@
+# QMK Breaking Change - 2020 May 30 Changelog
+
+Four times a year QMK runs a process for merging Breaking Changes. A Breaking Change is any change which modifies how QMK behaves in a way that is incompatible or potentially dangerous. We limit these changes to 4 times per year so that users can have confidence that updating their QMK tree will not break their keymaps.
+
+The list of changes follows.
+
+
+## Core Changes
+
+### Converting V-USB usbdrv to a submodule
+
+[#8321](https://github.com/qmk/qmk_firmware/pull/8321) and [qmk_compiler#62](https://github.com/qmk/qmk_compiler/pull/62).
+
+These PRs move the V-USB driver code out of the qmk_firmware repository and into a submodule pointed at https://github.com/obdev/v-usb. This will make it easier to update the codebase if needed, while applying any potential QMK-specific modifications by forking it to the QMK GitHub organization.
+
+### Unify Tap Hold functions and documentation
+
+[#8348](https://github.com/qmk/qmk_firmware/pull/8348)
+
+Updates all of the per key tap-hold functions to pass the `keyrecord_t` structure, and include documentation changes.
+
+Any remaining versions or code outside of the main repo will need to be converted: 
+| Old function                                         | New Function                                                              |
+|------------------------------------------------------|---------------------------------------------------------------------------|
+|`uint16_t get_tapping_term(uint16_t keycode)`         |`uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record)`         |
+|`bool get_ignore_mod_tap_interrupt(uint16_t keycode)` |`bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record)` |
+
+### Python Required In The Build Process
+
+[#9000](https://github.com/qmk/qmk_firmware/pull/9000)
+
+This is the last release of QMK that will work without having Python 3.6 (or later) installed. If your environment is not fully setup you will get a warning instructing you to set it up.
+
+After the next breaking change you will not be able to build if `bin/qmk hello` does not work.
+
+### Upgrade from tinyprintf to mpaland/printf
+
+[#8269](https://github.com/qmk/qmk_firmware/pull/8269)
+
+- Provides debug functionality on ChibiOS/ARM that is more compliant than previous integrations.
+- Less maintenence, fewer QMK customisations, and allows QMK to sidestep previous compile and runtime issues.
+- A `make git-submodule` may be required after pulling the latest QMK Firmware code to update to the new dependency.
+
+### Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup
+
+[#6480](https://github.com/qmk/qmk_firmware/pull/6480)
+
+- Changes `RGB_DISABLE_AFTER_TIMEOUT` to be based on milliseconds instead of ticks.
+- Includes a code cleanup, resulting in a savings of 100 bytes, depending on features used.
+- Fixed issues with timeouts / suspending at the wrong time not turning off all LEDs in some cases.
+
+The `RGB_DISABLE_AFTER_TIMEOUT` definition is now deprecated, and has been superseded by `RGB_DISABLE_TIMEOUT`. To use the new definition, rename `RGB_DISABLE_AFTER_TIMEOUT` to `RGB_DISABLE_TIMEOUT` in your `config.h` file, and multiply the value set by 1200.
+
+Before: `#define RGB_DISABLE_AFTER_TIMEOUT 100`  
+After: `#define RGB_DISABLE_TIMEOUT 120000`
+
+### Switch to qmk forks for everything
+
+[#9019](https://github.com/qmk/qmk_firmware/pull/9019)
+
+Fork all QMK submodules to protect against upstream repositories disappearing.
+
+### code cleanup regarding deprecated macro PLAY_NOTE_ARRAY by replacing it with PLAY_SONG
+
+[#8484](https://github.com/qmk/qmk_firmware/pull/8484)
+
+Removes the deprecated `PLAY_NOTE_ARRAY` macro. References to it are replaced with `PLAY_SONG`, which references the same function.
+
+### fixing wrong configuration of AUDIO feature
+
+[#8903](https://github.com/qmk/qmk_firmware/pull/8903) and [#8974](https://github.com/qmk/qmk_firmware/pull/8974)
+
+`audio_avr.c` does not default to any pin; there has to be a #define XX_AUDIO in config.h at some level for Audio to actually work. Otherwise, the Audio code ends up cluttering the firmware, possibly breaking builds because the maximum allowed firmware size is exceeded.
+
+These changes fix this by disabling Audio on keyboards that have the feature misconfigured, and therefore non-functional.
+
+Also, add a compile-time error to alert the user to a missing pin-configuration (on AVR boards) when `AUDIO_ENABLE = yes` is set.
+
+
+## Keyboard Refactors
+
+### Migrating Lily58 to use split_common
+
+[#6260](https://github.com/qmk/qmk_firmware/pull/6260)
+
+Modifies the default firmware for Lily58 to use the `split_common` library, instead of including and depending on its own set of libraries for the following functionality:
+
+- SSD1306 display
+- i2c for OLED
+- Serial Communication
+
+This allows current lily58 firmware to advance with updates to the `split_common` library, which is shared with many other split keyboards.
+
+#### To migrate existing Lily58 firmware:
+
+[Changes to `config.h`](https://github.com/qmk/qmk_firmware/pull/6260/files#diff-445ac369c8717dcd6fc6fc3630836fc1):
+- Remove `#define SSD1306OLED` from config.h
+
+
+[Changes to `keymap.c`](https://github.com/qmk/qmk_firmware/pull/6260/files#diff-20943ea59856e9bdf3d99ecb2eee40b7):
+- Find/Replace each instance of `#ifdef SSD1306OLED` with `#ifdef OLED_DRIVER_ENABLE`
+- The following changes are for compatibility with the OLED driver. If you don't use the OLED driver you may safely delete [this section](https://github.com/qmk/qmk_firmware/blob/e6b9980bd45c186f7360df68c24b6e05a80c10dc/keyboards/lily58/keymaps/default/keymap.c#L144-L190)
+- Alternatively, if you did not change the OLED code from that in `default`, you may find it easier to simply copy the [relevant section](https://github.com/qmk/qmk_firmware/blob/4ac310668501ae6786c711ecc8f01f62ddaa1c0b/keyboards/lily58/keymaps/default/keymap.c#L138-L172). Otherwise, the changes you need to make are as follows (sample change [here](https://github.com/qmk/qmk_firmware/pull/6260/files#diff-20943ea59856e9bdf3d99ecb2eee40b7R138-R173))
+- [Remove](https://github.com/qmk/qmk_firmware/pull/6260/files#diff-20943ea59856e9bdf3d99ecb2eee40b7L138-L141) the block
+```c
+#ifdef SSD1306OLED	
+  iota_gfx_init(!has_usb());   // turns on the display	
+#endif
+```
+- Within the block bounded by `#ifdef OLED_DRIVER_ENABLE` and `#endif // OLED_DRIVER_ENABLE`, add the following block to ensure that your two OLEDs are rotated correctly across the left and right sides:
+```c
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+  if (!is_keyboard_master())
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+  return rotation;
+}
+```
+- Remove the functions `matrix_scan_user`, `matrix_update` and `iota_gfx_task_user`
+- Find/Replace `matrix_render_user(struct CharacterMatrix *matrix)` with `iota_gfx_task_user(void)`
+- Find/Replace `is_master` with `is_keyboard_master()`
+- For each instance of `matrix_write_ln(matrix, display_fn())`, rewrite it as `oled_write_ln(read_layer_state(), false);`
+- For each instance of `matrix_write(matrix, read_logo());`, replace with `oled_write(read_logo(), false);`
+
+### Refactor zinc to use split_common
+
+[#7114](https://github.com/qmk/qmk_firmware/pull/7114) and [#9171](https://github.com/qmk/qmk_firmware/pull/9171)
+
+* Refactor to use split_common and remove split codes under the zinc/revx/
+* Add - backlight RGB LED and/or underglow RGB LED option
+* Add - continuous RGB animations feature (between L and R halves) 
+* Fix - keymap files to adapt to changes
+    * all authors of keymaps confirmed this PR
+* Update - documents and rules.mk
+
+### Refactor of TKC1800 to use common OLED code
+
+[#8472](https://github.com/qmk/qmk_firmware/pull/8472)
+
+Modifies the default firmware for TKC1800 to use the in-built I2C and OLED drivers, instead of including and depending on its own set of libraries for the following functionality:
+
+- SSD1306 display
+- i2c for OLED
+
+This allows current TKC1800 firmware to advance with updates to those drivers, which are shared with other keyboards.
+
+#### To migrate existing TKC1800 firmware:
+
+[Changes to `config.h`](https://github.com/qmk/qmk_firmware/pull/8472/files#diff-d10b26e676b4a55cbb00d71955116526):
+- Remove `#define SSD1306OLED` from config.h
+
+[Changes to `tkc1800.c`](https://github.com/qmk/qmk_firmware/pull/8472/files#diff-3b35bd30abe89c8110717c6972cd2cc5):
+- Add the following to avoid debug errors on HID_listen if the screen is not present
+```c
+void keyboard_pre_init_kb(void) {
+  setPinInputHigh(D0);
+  setPinInputHigh(D1);
+
+  keyboard_pre_init_user();
+}
+```
+
+[Changes to `keymap.c`](https://github.com/qmk/qmk_firmware/pull/8472/files#diff-05a2a344ce27e4d045fe68520ccd4771):
+- Find/Replace each instance of `#ifdef SSD1306OLED` with `#ifdef OLED_DRIVER_ENABLE`
+- The following changes are for compatibility with the OLED driver. If you don't use the OLED driver you may safely delete [this section](https://github.com/qmk/qmk_firmware/blob/e6b9980bd45c186f7360df68c24b6e05a80c10dc/keyboards/lily58/keymaps/default/keymap.c#L144-L190)
+- [Remove](https://github.com/qmk/qmk_firmware/pull/6260/files#diff-20943ea59856e9bdf3d99ecb2eee40b7L91-L158) the block
+```c
+#ifdef SSD1306OLED	
+  iota_gfx_init(!has_usb());   // turns on the display	
+#endif
+```
+- Within the block bounded by `#ifdef OLED_DRIVER_ENABLE` and `#endif // OLED_DRIVER_ENABLE`, add the following block to ensure that your two OLEDs are rotated correctly across the left and right sides:
+```c
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+  if (!is_keyboard_master())
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+  return rotation;
+}
+```
+- Remove the function `iota_gfx_task_user`
+
+### Split HHKB to ANSI and JP layouts and Add VIA support for each
+
+[#8582](https://github.com/qmk/qmk_firmware/pull/8582)
+
+- Splits the HHKB codebase into two separate folders `keyboards/hhkb/ansi` and `keyboards/hhkb/jp`.
+- Adds VIA Configurator support for both versions.
+
+#### Migrating existing HHKB keymaps
+
+- Remove any checks for the `HHKB_JP` definition
+  - All checks for this definition have been removed, and each version uses the source that is appropriate to that version.
+- Move the directory for your keymap into the appropriate `keymaps` directory
+  - `keyboards/hhkb/ansi/keymaps/` for ANSI HHKBs
+  - `keyboards/hhkb/jp/keymaps/` for HHKB JPs
+- Compile with the new keyboard names
+  - This PR changes the compilation instructions for the HHKB Alternate Controller. To compile firmware for this controller moving forward, use:
+    - `make hhkb/ansi` for ANSI-layout HHKBs
+    - `make hhkb/jp` for HHKB JP keyboards
+
+
+## Keyboard Moves
+
+- [#8412](https://github.com/qmk/qmk_firmware/pull/8412 "Changing board names to prevent confusion") by blindassassin111
+- [#8499](https://github.com/qmk/qmk_firmware/pull/8499 "Move the Keyboardio Model01 to a keyboardio/ subdir") by algernon
+- [#8830](https://github.com/qmk/qmk_firmware/pull/8830 "Move spaceman keyboards") by Spaceman (formerly known as Rionlion100)
+- [#8537](https://github.com/qmk/qmk_firmware/pull/8537 "Organizing my keyboards (plaid, tartan, ergoinu)") by hsgw
+
+Keyboards by Keyboardio, Spaceman, and hsgw move to vendor folders, while PCBs designed by blindassassin111 are renamed.
+
+Old Name           | New Name
+:----------------- | :-----------------
+2_milk             | spaceman/2_milk
+at101_blackheart   | at101_bh
+ergoinu            | dm9records/ergoinu
+model01            | keyboardio/model01
+omnikey_blackheart | omnikey_bh
+pancake            | spaceman/pancake
+plaid              | dm9records/plaid
+tartan             | dm9records/tartan
+z150_blackheart    | z150_bh
+
+If you own one of these PCBs, please use the new names to compile your firmware moving forward.
+
+
+## Keycode Migration PRs
+
+[#8954](https://github.com/qmk/qmk_firmware/pull/8954 "Migrate `ACTION_LAYER_TOGGLE` to `TG()`"), [#8957](https://github.com/qmk/qmk_firmware/pull/8957 "Migrate `ACTION_MODS_ONESHOT` to `OSM()`"), [#8958](https://github.com/qmk/qmk_firmware/pull/8958 "Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()`"), [#8959](https://github.com/qmk/qmk_firmware/pull/8959 "Migrate `ACTION_LAYER_MODS` to `LM()`"), [#8968](https://github.com/qmk/qmk_firmware/pull/8968 "Migrate `ACTION_MODS_TAP_KEY` to `MT()`"), [#8977](https://github.com/qmk/qmk_firmware/pull/8977 "Migrate miscellaneous `fn_actions` entries"), and [#8979](https://github.com/qmk/qmk_firmware/pull/8979 "Migrate `ACTION_MODS_KEY` to chained mod keycodes")
+
+Authored by fauxpark, these pull requests remove references to deprecated TMK macros that have been superseded by native QMK keycodes.
+
+Old `fn_actions` action | New QMK keycode
+:---------------------- | :--------------
+`ACTION_DEFAULT_LAYER_SET(layer)` | `DF(layer)`
+`ACTION_LAYER_MODS(layer, mod)` | `LM(layer, mod)`
+`ACTION_LAYER_ONESHOT(mod)` | `OSL(mod)`
+`ACTION_LAYER_TOGGLE(layer)` | `TG(layer)`
+`ACTION_MODS_ONESHOT(mod)` | `OSM(mod)`
+`ACTION_MODS_TAP_KEY(mod, kc)` | `MT(mod, kc)`
+`ACTION_MODS_KEY(mod, kc)`<br>e.g. `ACTION_MODS_KEY(MOD_LCTL, KC_0)` | `MOD(kc)`<br>e.g. `LCTL(KC_0)`

docs/_summary.md

@@ -55,6 +55,7 @@
   * Simple Keycodes
     * [Full List](keycodes.md)
     * [Basic Keycodes](keycodes_basic.md)
+    * [Language-Specific Keycodes](reference_keymap_extras.md)
     * [Modifier Keys](feature_advanced_keycodes.md)
     * [Quantum Keycodes](quantum_keycodes.md)
 
@@ -114,6 +115,7 @@
     * [Overview](breaking_changes.md)
     * [My Pull Request Was Flagged](breaking_changes_instructions.md)
     * History
+      * [2020 May 30](ChangeLog/20200530.md)
       * [2020 Feb 29](ChangeLog/20200229.md)
       * [2019 Aug 30](ChangeLog/20190830.md)
 
@@ -128,6 +130,7 @@
       * [SPI Driver](spi_driver.md)
       * [WS2812 Driver](ws2812_driver.md)
       * [EEPROM Driver](eeprom_driver.md)
+      * ['serial' Driver](serial_driver.md)
     * [GPIO Controls](internals_gpio_control.md)
     * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
 

docs/breaking_changes.md

@@ -6,27 +6,28 @@ The breaking change period is when we will merge PR's that change QMK in dangero
 
 ## What has been included in past Breaking Changes?
 
+* [2020 May 30](ChangeLog/20200530.md)
 * [2020 Feb 29](ChangeLog/20200229.md)
 * [2019 Aug 30](ChangeLog/20190830.md)
 
 ## When is the next Breaking Change?
 
-The next Breaking Change is scheduled for May 30, 2020.
+The next Breaking Change is scheduled for Aug 29, 2020.
 
 ### Important Dates
 
-* [x] 2020 Feb 29 - `future` is created. It will be rebased weekly.
-* [ ] 2020 May 2 - `future` closed to new PR's.
-* [ ] 2020 May 2 - Call for testers.
-* [ ] 2020 May 28 - `master` is locked, no PR's merged.
-* [ ] 2020 May 30 - Merge `future` to `master`.
-* [ ] 2020 May 30 - `master` is unlocked. PR's can be merged again.
+* [x] 2020 May 30 - `develop` is created. It will be rebased weekly.
+* [ ] 2020 Aug 1 - `develop` closed to new PR's.
+* [ ] 2020 Aug 1 - Call for testers.
+* [ ] 2020 Aug 27 - `master` is locked, no PR's merged.
+* [ ] 2020 Aug 29 - Merge `develop` to `master`.
+* [ ] 2020 Aug 29 - `master` is unlocked. PR's can be merged again.
 
 ## What changes will be included?
 
-To see a list of breaking change candidates you can look at the [`breaking_change` label](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+label%3Abreaking_change+is%3Apr). New changes might be added between now and when `future` is closed, and a PR with that label applied is not guaranteed to be merged.
+To see a list of breaking change candidates you can look at the [`breaking_change` label](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+label%3Abreaking_change+is%3Apr). New changes might be added between now and when `develop` is closed, and a PR with that label applied is not guaranteed to be merged.
 
-If you want your breaking change to be included in this round you need to create a PR with the `breaking_change` label and have it accepted before `future` closes. After `future` closes no new breaking changes will be accepted.
+If you want your breaking change to be included in this round you need to create a PR with the `breaking_change` label and have it accepted before `develop` closes. After `develop` closes no new breaking changes will be accepted.
 
 Criteria for acceptance:
 
@@ -37,9 +38,9 @@ Criteria for acceptance:
 
 This section documents various processes we use when running the Breaking Changes process.
 
-## Rebase `future` from `master`
+## Rebase `develop` from `master`
 
-This is run every Friday while `future` is open.
+This is run every Friday while `develop` is open.
 
 Process:
 
@@ -47,31 +48,31 @@ Process:
 cd qmk_firmware
 git checkout master
 git pull --ff-only
-git checkout future
+git checkout develop
 git rebase master
 git push --force
 ```
 
-## Creating the `future` branch
+## Creating the `develop` branch
 
-This happens immediately after the previous `future` branch is merged.
+This happens immediately after the previous `develop` branch is merged.
 
 * `qmk_firmware` git commands
     * [ ] `git checkout master`
     * [ ] `git pull --ff-only`
-    * [ ] `git checkout -b future`
+    * [ ] `git checkout -b develop`
     * [ ] Edit `readme.md`
         * [ ] Add a big notice at the top that this is a testing branch.
         * [ ] Include a link to this document
     * [ ] `git commit -m 'Branch point for <DATE> Breaking Change'`
     * [ ] `git tag breakpoint_<YYYY>_<MM>_<DD>`
     * [ ] `git tag <next_version>` # Prevent the breakpoint tag from confusing version incrementing
-    * [ ] `git push origin future`
+    * [ ] `git push origin develop`
     * [ ] `git push --tags`
 
 ## 4 Weeks Before Merge
 
-* `future` is now closed to new PR's, only fixes for current PR's may be merged
+* `develop` is now closed to new PR's, only fixes for current PR's may be merged
 * Post call for testers
     * [ ] Discord
     * [ ] GitHub PR
@@ -94,15 +95,15 @@ This happens immediately after the previous `future` branch is merged.
 ## Day Of Merge
 
 * `qmk_firmware` git commands
-    * [ ] `git checkout future`
+    * [ ] `git checkout develop`
     * [ ] `git pull --ff-only`
     * [ ] `git rebase origin/master`
     * [ ] Edit `readme.md`
-        * [ ] Remove the notes about `future`
+        * [ ] Remove the notes about `develop`
     * [ ] Roll up the ChangeLog into one file.
     * [ ] `git commit -m 'Merge point for <DATE> Breaking Change'`
-    * [ ] `git push origin future`
-* Github Actions
-    * [ ] Create a PR for `future`
+    * [ ] `git push origin develop`
+* GitHub Actions
+    * [ ] Create a PR for `develop`
     * [ ] Make sure travis comes back clean
-    * [ ] Merge `future` PR
+    * [ ] Merge `develop` PR

docs/breaking_changes_instructions.md

@@ -27,7 +27,7 @@ If you are contributing core code, and the only reason it needs to go through br
 
 We require submissions that go through the Breaking Change process to include a changelog entry. The entry should be a short summary of the changes your pull request makes – [each section here started as a changelog](ChangeLog/20190830.md "n.b. This should link to the 2019 Aug 30 Breaking Changes doc  - @noroadsleft").
 
-Your changelog should be located at `docs/ChangeLog/YYYYMMDD/PR####.md`, where `YYYYMMDD` is the date on which QMK's breaking change branch – usually named `future` – will be merged into the `master` branch, and `####` is the number of your pull request.
+Your changelog should be located at `docs/ChangeLog/YYYYMMDD/PR####.md`, where `YYYYMMDD` is the date on which QMK's breaking change branch – usually named `develop` – will be merged into the `master` branch, and `####` is the number of your pull request.
 
 If your submission requires action on the part of users, your changelog should instruct users what action(s) must be taken, or link to a location that does so.
 

docs/cli_commands.md

@@ -6,6 +6,8 @@
 
 This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm>, compile keymaps in the repo, or compile the keyboard in the current working directory.
 
+This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
+
 **Usage for Configurator Exports**:
 
 ```
@@ -73,8 +75,9 @@ $ qmk compile -kb dz60
 
 ## `qmk flash`
 
-This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default.
-To specify a different bootloader, use `-bl <bootloader>`. Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
+This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default. To specify a different bootloader, use `-bl <bootloader>`. Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
+
+This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
 
 **Usage for Configurator Exports**:
 
@@ -128,6 +131,32 @@ Check your environment and report problems only:
 
     qmk doctor -n
 
+## `qmk info`
+
+Displays information about keyboards and keymaps in QMK. You can use this to get information about a keyboard, show the layouts, display the underlying key matrix, or to pretty-print JSON keymaps.
+
+**Usage**:
+
+```
+qmk info [-f FORMAT] [-m] [-l] [-km KEYMAP] [-kb KEYBOARD]
+```
+
+This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
+
+**Examples**:
+
+Show basic information for a keyboard:
+
+    qmk info -kb planck/rev5
+
+Show the matrix for a keyboard:
+
+    qmk info -kb ergodox_ez -m
+
+Show a JSON keymap for a keyboard:
+
+    qmk info -kb clueboard/california -km default
+
 ## `qmk json2c`
 
 Creates a keymap.c from a QMK Configurator export.
@@ -152,6 +181,8 @@ qmk list-keyboards
 
 This command lists all the keymaps for a specified keyboard (and revision).
 
+This command is directory aware. It will automatically fill in KEYBOARD if you are in a keyboard directory.
+
 **Usage**:
 
 ```
@@ -162,6 +193,8 @@ qmk list-keymaps -kb planck/ez
 
 This command creates a new keymap based on a keyboard's existing default keymap.
 
+This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
+
 **Usage**:
 
 ```

docs/cli_configuration.md

@@ -108,7 +108,7 @@ compile.keymap: skully -> None
 |-----|---------------|-------------|
 | user.keyboard | None | The keyboard path (Example: `clueboard/66/rev4`) |
 | user.keymap | None | The keymap name (Example: `default`) |
-| user.name | None | The user's github username. |
+| user.name | None | The user's GitHub username. |
 
 # All Configuration Options
 

docs/cli_development.md

@@ -210,7 +210,7 @@ Our tests can be found in `lib/python/qmk/tests/`. You will find both unit and i
 
 If your PR does not include a comprehensive set of tests please add comments like this to your code so that other people know where they can help:
 
-    # TODO(unassigned/<yourGithubUsername>): Write <unit|integration> tests
+    # TODO(unassigned/<your_github_username>): Write <unit|integration> tests
 
 We use [nose2](https://nose2.readthedocs.io/en/latest/getting_started.html) to run our tests. You can refer to the nose2 documentation for more details on what you can do in your test functions.
 

docs/configurator_step_by_step.md

@@ -12,7 +12,7 @@ I'll say that again because it's important:
 
 !> **MAKE SURE YOU SELECT THE RIGHT VERSION!**
 
-If your keyboard has been advertised to be powered by QMK but is not in the list, chances are a developer hasn't gotten to it yet or we haven't had a chance to merge it in yet. File an issue at [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) requesting to support that particular keyboard, if there is no active [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) for it. There are also QMK powered keyboards that are in their manufacturer's own github accounts. Double check for that as well.  <!-- FIXME(skullydazed): This feels too wordy and I'm not sure we want to encourage these kinds of issues. Also, should we prompt them to bug the manufacutrer? -->
+If your keyboard has been advertised to be powered by QMK but is not in the list, chances are a developer hasn't gotten to it yet or we haven't had a chance to merge it in yet. File an issue at [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) requesting to support that particular keyboard, if there is no active [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) for it. There are also QMK powered keyboards that are in their manufacturer's own GitHub accounts. Double check for that as well.  <!-- FIXME(skullydazed): This feels too wordy and I'm not sure we want to encourage these kinds of issues. Also, should we prompt them to bug the manufacutrer? -->
 
 ## Step 2: Select Your Keyboard Layout
 

docs/custom_quantum_functions.md

@@ -57,7 +57,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     case KC_ENTER:
       // Play a tone when enter is pressed
       if (record->event.pressed) {
-        PLAY_NOTE_ARRAY(tone_qwerty);
+        PLAY_SONG(tone_qwerty);
       }
       return true; // Let QMK send the enter press/release events
     default:
@@ -438,7 +438,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     case KC_ENTER:
         // Play a tone when enter is pressed
         if (record->event.pressed) {
-            PLAY_NOTE_ARRAY(tone_qwerty);
+            PLAY_SONG(tone_qwerty);
         }
         return true; // Let QMK send the enter press/release events
     case RGB_LYR:  // This allows me to use underglow as layer indication, or as normal
@@ -486,56 +486,3 @@ And you're done.  The RGB layer indication will only work if you want it to. And
 * Keymap: `void eeconfig_init_user(void)`, `uint32_t eeconfig_read_user(void)` and `void eeconfig_update_user(uint32_t val)`
 
 The `val` is the value of the data that you want to write to EEPROM.  And the `eeconfig_read_*` function return a 32 bit (DWORD) value from the EEPROM. 
-
-# Custom Tapping Term
-
-By default, the tapping term and related options (such as `IGNORE_MOD_TAP_INTERRUPT`) are defined globally, and are not configurable by key.  For most users, this is perfectly fine.  But in some cases, dual function keys would be greatly improved by different timeout behaviors than `LT` keys, or because some keys may be easier to hold than others.  Instead of using custom key codes for each, this allows for per key configurable timeout behaviors.
-
-There are two configurable options to control per-key timeout behaviors:
-
-- `TAPPING_TERM_PER_KEY`
-- `IGNORE_MOD_TAP_INTERRUPT_PER_KEY`
-
-You need to add `#define` lines to your `config.h` for each feature you want.
-
-```
-#define TAPPING_TERM_PER_KEY
-#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY
-```
-
-
-## Example `get_tapping_term` Implementation
-
-To change the `TAPPING_TERM` based on the keycode, you'd want to add something like the following to your `keymap.c` file:
-
-```c
-uint16_t get_tapping_term(uint16_t keycode) {
-  switch (keycode) {
-    case SFT_T(KC_SPC):
-      return TAPPING_TERM + 1250;
-    case LT(1, KC_GRV):
-      return 130;
-    default:
-      return TAPPING_TERM;
-  }
-}
-```
-
-## Example `get_ignore_mod_tap_interrupt` Implementation
-
-To change the `IGNORE_MOD_TAP_INTERRUPT` value based on the keycode, you'd want to add something like the following to your `keymap.c` file:
-
-```c
-bool get_ignore_mod_tap_interrupt(uint16_t keycode) {
-  switch (keycode) {
-    case SFT_T(KC_SPC):
-      return true;
-    default:
-      return false;
-  }
-}
-```
-
-## `get_tapping_term` / `get_ignore_mod_tap_interrupt` Function Documentation
-
-Unlike many of the other functions here, there isn't a need (or even reason) to have a quantum or keyboard level function. Only user level functions are useful here, so no need to mark them as such.

docs/de/README.md

@@ -13,7 +13,7 @@ QMK (*Quantum Mechanical Keyboard*) ist eine Open-Source-Community, welche die Q
 
 ## Bezugsquelle für QMK
 
-Wenn Du vorhast, deine Tastatur, Tastaturbelegung oder Features zu QMK beizusteuern, geht das am einfachsten, indem Du das [Repository auf Github](https://github.com/qmk/qmk_firmware#fork-destination-box) forkst, die Änderungen in deinem lokalen Repo vornimmst und anschließend einen [Pull Request](https://github.com/qmk/qmk_firmware/pulls) einreichst.
+Wenn Du vorhast, deine Tastatur, Tastaturbelegung oder Features zu QMK beizusteuern, geht das am einfachsten, indem Du das [Repository auf GitHub](https://github.com/qmk/qmk_firmware#fork-destination-box) forkst, die Änderungen in deinem lokalen Repo vornimmst und anschließend einen [Pull Request](https://github.com/qmk/qmk_firmware/pulls) einreichst.
 
 Ansonsten kannst Du es als [zip](https://github.com/qmk/qmk_firmware/zipball/master) oder [tar](https://github.com/qmk/qmk_firmware/tarball/master) herunterladen, oder es direkt via git klonen (`git clone git@github.com:qmk/qmk_firmware.git` bzw. `git clone https://github.com/qmk/qmk_firmware.git`).
 

docs/de/_summary.md

@@ -11,7 +11,7 @@
   * [QMK CLI](de/cli.md)
   * [QMK CLI Konfiguration](de/cli_configuration.md)
   * [Zu QMK beitragen](de/contributing.md)
-  * [Anleitung für Github](de/getting_started_github.md)
+  * [Anleitung für GitHub](de/getting_started_github.md)
   * [Nach Hilfe fragen](de/getting_started_getting_help.md)
 
 * [Breaking Changes](de/breaking_changes.md)

docs/de/newbs_learn_more_resources.md

@@ -6,7 +6,7 @@ Git Ressourcen:
 
 * [Gutes allgemeines Tutorial](https://www.codecademy.com/learn/learn-git) (auf Englisch)
 * [Git spielerisch anhand von Beispielen lernen](https://learngitbranching.js.org/) (auf Englisch)
-* [Mehr über den allgemeinen Umgang mit Github](getting_started_github.md)
+* [Mehr über den allgemeinen Umgang mit GitHub](getting_started_github.md)
 * [Mehr über Git im Bezug zu QMK](contributing.md)
 
 Mehr über die Arbeit mit der Befehlszeile:

docs/es/README.md

@@ -13,7 +13,7 @@ QMK (*Quantum Mechanical Keyboard*) es una comunidad open source que mantiene el
 
 ## Cómo conseguirlo
 
-Si estás pensando en contribuir con un keymap, teclado, or característica a QMK, la manera más sencilla es hacer un [fork del repositorio en Github](https://github.com/qmk/qmk_firmware#fork-destination-box), y clonar tu repositorio localmente para hacer los cambios, subirlos, y abir un [Pull Request](https://github.com/qmk/qmk_firmware/pulls) desde tu fork.
+Si estás pensando en contribuir con un keymap, teclado, or característica a QMK, la manera más sencilla es hacer un [fork del repositorio en GitHub](https://github.com/qmk/qmk_firmware#fork-destination-box), y clonar tu repositorio localmente para hacer los cambios, subirlos, y abir un [Pull Request](https://github.com/qmk/qmk_firmware/pulls) desde tu fork.
 
 De cualquier manera, también puedes descargarlo directamente en formatos ([zip](https://github.com/qmk/qmk_firmware/zipball/master), [tar](https://github.com/qmk/qmk_firmware/tarball/master)), o clonarlo via git (`git@github.com:qmk/qmk_firmware.git`), o https (`https://github.com/qmk/qmk_firmware.git`).
 

docs/es/_summary.md

@@ -11,7 +11,7 @@
   * [QMK CLI](es/cli.md)
   * [Configuración de QMK CLI](es/cli_configuration.md)
   * [Contribuyendo a QMK](es/contributing.md)
-  * [Cómo usar Github](es/getting_started_github.md)
+  * [Cómo usar GitHub](es/getting_started_github.md)
   * [Obtener ayuda](es/getting_started_getting_help.md)
 
 * [Cambios incompatibles](es/breaking_changes.md)

docs/es/newbs_best_practices.md

@@ -6,7 +6,7 @@ Este documento procura instruir a los novatos en las mejores prácticas para ten
 
 En este documento suponemos un par de cosas:
 
-1. Tienes una cuenta de Github, y has hecho un [fork del repo qmk_firmware](getting_started_github.md) en tu cuenta.
+1. Tienes una cuenta de GitHub, y has hecho un [fork del repo qmk_firmware](getting_started_github.md) en tu cuenta.
 2. Has [configurado tu entorno de desarrollo](newbs_getting_started.md?id=environment-setup).
 
 

docs/es/newbs_building_firmware_configurator.md

@@ -21,7 +21,7 @@ Lo diré otra vez porque es importante
 
 !> **ASEGÚRATE DE QUE SELECCIONAS LA VERSIÓN CORRECTA!**
 
-Si se ha anunciado que tu teclado funciona con QMK pero no está en la lista, es probable que un desarrollador no se haya encargado de él aún o que todavía no hemos tenido la oportunidad de incluirlo. Abre un issue en [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) solicitando soportar ese teclado un particular, si no hay un [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) activo para ello. Hay también teclados que funcionan con QMK que están en las cuentas de github de sus manufacturantes. Acuérdate de comprobar esto también. 
+Si se ha anunciado que tu teclado funciona con QMK pero no está en la lista, es probable que un desarrollador no se haya encargado de él aún o que todavía no hemos tenido la oportunidad de incluirlo. Abre un issue en [qmk_firmware](https://github.com/qmk/qmk_firmware/issues) solicitando soportar ese teclado un particular, si no hay un [Pull Request](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+is%3Apr+label%3Akeyboard) activo para ello. Hay también teclados que funcionan con QMK que están en las cuentas de GitHub de sus manufacturantes. Acuérdate de comprobar esto también.
 
 ## Eligiendo el layout de tu teclado
 

docs/es/newbs_learn_more_resources.md

@@ -6,7 +6,7 @@ Recursos de Git:
 
 * [Excelente tutorial general](https://www.codecademy.com/learn/learn-git)
 * [Juego de Git para aprender usando ejemplos](https://learngitbranching.js.org/)
-* [Recursos de Git para aprender más sobre Github](getting_started_github.md)
+* [Recursos de Git para aprender más sobre GitHub](getting_started_github.md)
 * [Recursos de Git dirigidos específicamente a QMK](contributing.md)
 
 

docs/feature_pointing_device.md

@@ -27,20 +27,17 @@ In the following example, a custom key is used to click the mouse and scroll 127
 
 ```c
 case MS_SPECIAL:
-	report_mouse_t currentReport = pointing_device_get_report();
-    if (record->event.pressed)
-    {
+    report_mouse_t currentReport = pointing_device_get_report();
+    if (record->event.pressed) {
         currentReport.v = 127;
-		currentReport.h = 127;
-		currentReport.buttons |= MOUSE_BTN1; //this is defined in report.h
-    }
-    else
-    {
+        currentReport.h = 127;
+        currentReport.buttons |= MOUSE_BTN1;  // this is defined in report.h
+    } else {
         currentReport.v = -127;
         currentReport.h = -127;
         currentReport.buttons &= ~MOUSE_BTN1;
     }
-	pointing_device_set_report(currentReport);
+    pointing_device_set_report(currentReport);
     break;
 ```
 

docs/feature_rawhid.md

@@ -44,7 +44,11 @@ To connect your host computer to your keyboard with raw HID you need four pieces
 3. Usage Page
 4. Usage
 
-The first two can easily be found in your keyboard's `config.h` in the keyboard's main directory under `VENDOR_ID` and `PRODUCT_ID`. **Usage Page** is **`0xFF60`** and **Usage** is **`0x0061`**.
+The first two can easily be found in your keyboard's `config.h` in the keyboard's main directory under `VENDOR_ID` and `PRODUCT_ID`.
+
+The final two can be overridden in your keyboard's `config.h` in the keyboard's main directory by redefining the values: `#define RAW_USAGE_PAGE 0xFF60` and `#define RAW_USAGE_ID 0x61`.
+
+By default, **Usage Page** is `0xFF60` and **Usage** is `0x61`.
 
 ### Building your host
 

docs/feature_rgb_matrix.md

@@ -374,7 +374,8 @@ These are defined in [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blo
 ```c
 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
-#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#define RGB_DISABLE_TIMEOUT 0 // number of milliseconds to wait until rgb automatically turns off
+#define RGB_DISABLE_AFTER_TIMEOUT 0 // OBSOLETE: number of ticks to wait until disabling effects
 #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
 #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)

docs/feature_split_keyboard.md

@@ -8,9 +8,20 @@ QMK Firmware has a generic implementation that is usable by any board, as well a
 
 For this, we will mostly be talking about the generic implementation used by the Let's Split and other keyboards. 
 
-!> ARM is not yet supported for Split Keyboards.  Progress is being made, but we are not quite there, yet. 
+!> ARM is not yet fully supported for Split Keyboards and has many limitations. Progress is being made, but we have not yet reached 100% feature parity.
 
 
+## Compatibility Overview
+
+| Transport                    | AVR                | ARM                |
+|------------------------------|--------------------|--------------------|
+| ['serial'](serial_driver.md) | :heavy_check_mark: | :white_check_mark: <sup>1</sup> |
+| I2C                          | :heavy_check_mark: |                    |
+
+Notes:
+
+1. Both hardware and software limitations are detailed within the [driver documentation](serial_driver.md).
+
 ## Hardware Configuration
 
 This assumes that you're using two Pro Micro-compatible controllers, and are using TRRS jacks to connect to two halves. 

docs/feature_userspace.md

@@ -1,6 +1,6 @@
 # Userspace: Sharing Code Between Keymaps
 
-If you use more than one keyboard with a similar keymap, you might see the benefit in being able to share code between them. Create your own folder in `users/` named the same as your keymap (ideally your github username, `<name>`) with the following structure:
+If you use more than one keyboard with a similar keymap, you might see the benefit in being able to share code between them. Create your own folder in `users/` named the same as your keymap (ideally your GitHub username, `<name>`) with the following structure:
 
 * `/users/<name>/` (added to the path automatically)
   * `readme.md` (optional, recommended)
@@ -73,7 +73,7 @@ The reason for this, is that `<name>.h` won't be added in time to add settings (
 
 ## Readme (`readme.md`)
 
-Please include authorship (your name, github username, email), and optionally [a license that's GPL compatible](https://www.gnu.org/licenses/license-list.html#GPLCompatibleLicenses).
+Please include authorship (your name, GitHub username, email), and optionally [a license that's GPL compatible](https://www.gnu.org/licenses/license-list.html#GPLCompatibleLicenses).
 
 You can use this as a template: 
 ```
@@ -93,7 +93,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 ```
 
-You'd want to replace the year, name, email and github username with your info. 
+You'd want to replace the year, name, email and GitHub username with your info. 
 
 Additionally, this is a good place to document your code, if you wish to share it with others. 
 

docs/fr-fr/README.md

@@ -4,8 +4,8 @@
 [![Statut du build](https://travis-ci.org/qmk/qmk_firmware.svg?branch=master)](https://travis-ci.org/qmk/qmk_firmware)
 [![Discord](https://img.shields.io/discord/440868230475677696.svg)](https://discord.gg/Uq7gcHh)
 [![Statut de la doc](https://img.shields.io/badge/docs-ready-orange.svg)](https://docs.qmk.fm)
-[![Contributeurs Github](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
-[![Forks Github](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
+[![Contributeurs GitHub](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
+[![Forks GitHub](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
 
 ## Qu'est-ce que QMK Firmware ?
 
@@ -13,7 +13,7 @@ QMK (*Quantum Mechanical Keyboard*) est une communauté open source qui maintien
 
 ## Comment l'obtenir
 
-Si vous souhaitez contribuer à une disposition de clavier (keymap), ou à des fonctionnalités de QMK alors le plus simple est de [forker le dépôt avec Github](https://github.com/qmk/qmk_firmware#fork-destination-box) puis cloner le dépôt localement pour y faire des changements. Vous pourrez pousser vos changements sur github puis ouvrir un [Pull Request](https://github.com/qmk/qmk_firmware/pulls) depuis votre fork Github.
+Si vous souhaitez contribuer à une disposition de clavier (keymap), ou à des fonctionnalités de QMK alors le plus simple est de [forker le dépôt avec GitHub](https://github.com/qmk/qmk_firmware#fork-destination-box) puis cloner le dépôt localement pour y faire des changements. Vous pourrez pousser vos changements sur GitHub puis ouvrir un [Pull Request](https://github.com/qmk/qmk_firmware/pulls) depuis votre fork GitHub.
 
 Sinon, vous pouvez aussi le télécharger directement en ([zip](https://github.com/qmk/qmk_firmware/zipball/master), [tar](https://github.com/qmk/qmk_firmware/tarball/master)), ou le cloner avec git en ssh (`git@github.com:qmk/qmk_firmware.git`), ou https (`https://github.com/qmk/qmk_firmware.git`).
 

docs/fr-fr/breaking_changes.md

@@ -101,7 +101,7 @@ Ceci est fait immédiatement après la fusion de la branche `future` précédent
     * [ ] Regroupe ChangeLog dans un fichier.
     * [ ] `git commit -m 'Merge point for <DATE> Breaking Change'`
     * [ ] `git push origin future`
-* Actions sur Github
+* Actions sur GitHub
     * [ ] Crée un PR pour `future`
     * [ ] S'assurer que Travis ne relève aucun problème
     * [ ] Fusion le PR `future`

docs/fr-fr/getting_started_github.md

@@ -6,11 +6,11 @@ GitHub peut être un peu compliqué pour ceux qui n'y sont pas familier. Ce guid
 
 Commencez par la [page GitHub de QMK](https://github.com/qmk/qmk_firmware), et vous verrez un bouton dans le coin en haut à droite qui indique "Fork":
 
-![Fork on Github](http://i.imgur.com/8Toomz4.jpg)
+![Fork on GitHub](http://i.imgur.com/8Toomz4.jpg)
 
 Si vous faites partie d'une organisation, vous aurez besoin de savoir quel compte utiliser pour le fork. Dans la plupart des cas, vous voudrez créer le fork dans votre compte personnel. Une fois le fork complet (cela peut quelques fois prendre un peu de temps), appuyez sur le bouton "Clone or download":
 
-![Download from Github](http://i.imgur.com/N1NYcSz.jpg)
+![Download from GitHub](http://i.imgur.com/N1NYcSz.jpg)
 
 Faites attention à sélectionner "HTTPS", et sélectionnez le lien et copiez-le:
 

docs/fr-fr/newbs_best_practices.md

@@ -44,7 +44,7 @@ git pull upstream master
 git push origin master
 ```
 
-Cela vous change la branche courante en master, synchronise les données de références du dépôt QMK vers votre ordinateur. La commande pull tire les données de références vers votre branche courante puis les y téleverse. La commande push permet de pousser la branche courante (master) vers votre fork github.
+Cela vous change la branche courante en master, synchronise les données de références du dépôt QMK vers votre ordinateur. La commande pull tire les données de références vers votre branche courante puis les y téleverse. La commande push permet de pousser la branche courante (master) vers votre fork GitHub.
 
 ### Faire des changements
 

docs/getting_started_github.md

@@ -1,16 +1,16 @@
-# How to Use Github with QMK
+# How to Use GitHub with QMK
 
-Github can be a little tricky to those that aren't familiar with it - this guide will walk through each step of forking, cloning, and submitting a pull request with QMK.
+GitHub can be a little tricky to those that aren't familiar with it - this guide will walk through each step of forking, cloning, and submitting a pull request with QMK.
 
 ?> This guide assumes you're somewhat comfortable with running things at the command line, and have git installed on your system.
 
-Start on the [QMK Github page](https://github.com/qmk/qmk_firmware), and you'll see a button in the upper right that says "Fork":
+Start on the [QMK GitHub page](https://github.com/qmk/qmk_firmware), and you'll see a button in the upper right that says "Fork":
 
-![Fork on Github](http://i.imgur.com/8Toomz4.jpg)
+![Fork on GitHub](http://i.imgur.com/8Toomz4.jpg)
 
 If you're a part of an organization, you'll need to choose which account to fork it to. In most circumstances, you'll want to fork it to your personal account. Once your fork is completed (sometimes this takes a little while), click the "Clone or Download" button:
 
-![Download from Github](http://i.imgur.com/N1NYcSz.jpg)
+![Download from GitHub](http://i.imgur.com/N1NYcSz.jpg)
 
 And be sure to select "HTTPS", and select the link and copy it:
 
@@ -54,7 +54,7 @@ To https://github.com/whoeveryouare/qmk_firmware.git
  + 20043e64...7da94ac5 master -> master
 ```
 
-Your changes now exist on your fork on Github - if you go back there (`https://github.com/<whoeveryouare>/qmk_firmware`), you can create a "New Pull Request" by clicking this button:
+Your changes now exist on your fork on GitHub - if you go back there (`https://github.com/<whoeveryouare>/qmk_firmware`), you can create a "New Pull Request" by clicking this button:
 
 ![New Pull Request](http://i.imgur.com/DxMHpJ8.jpg)