format code according to conventions [skip ci]

* implemented new mousekey_combined functionality

* minor formatting change to documentation

* Update tmk_core/common/mousekey.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update tmk_core/common/mousekey.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update tmk_core/common/mousekey.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update tmk_core/common/mousekey.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update docs/feature_mouse_keys.md

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update docs/feature_mouse_keys.md

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update docs/feature_mouse_keys.md

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update docs/feature_mouse_keys.md

Co-authored-by: Nick Brassel <nick@tzarc.org>

Co-authored-by: Nathan Vercaemert <nathan.vercaemert@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>

.gitignore

@@ -73,3 +73,6 @@ __pycache__
 
 # prerequisites for updating ChibiOS
 /util/fmpp*
+
+# Allow to exist but don't include it in the repo
+user_song_list.h

docs/config_options.md

@@ -43,8 +43,6 @@ This is a C header file that is one of the first things included, and will persi
   * generally who/whatever brand produced the board
 * `#define PRODUCT Board`
   * the name of the keyboard
-* `#define DESCRIPTION a keyboard`
-  * a short description of what the keyboard is
 * `#define MATRIX_ROWS 5`
   * the number of rows in your keyboard's matrix
 * `#define MATRIX_COLS 15`

docs/custom_quantum_functions.md

@@ -319,7 +319,7 @@ This runs code every time that the layers get changed.  This can be useful for l
 
 ### Example `layer_state_set_*` Implementation
 
-This example shows how to set the [RGB Underglow](feature_rgblight.md) lights based on the layer, using the Planck as an example
+This example shows how to set the [RGB Underglow](feature_rgblight.md) lights based on the layer, using the Planck as an example.
 
 ```c
 layer_state_t layer_state_set_user(layer_state_t state) {
@@ -343,6 +343,11 @@ layer_state_t layer_state_set_user(layer_state_t state) {
   return state;
 }
 ```
+
+Use the `IS_LAYER_ON_STATE(state, layer)` and `IS_LAYER_OFF_STATE(state, layer)` macros to check the status of a particular layer.
+
+Outside of `layer_state_set_*` functions, you can use the `IS_LAYER_ON(layer)` and `IS_LAYER_OFF(layer)` macros to check global layer state.
+
 ### `layer_state_set_*` Function Documentation
 
 * Keyboard/Revision: `layer_state_t layer_state_set_kb(layer_state_t state)`

docs/driver_installation_zadig.md

@@ -23,7 +23,7 @@ Zadig will automatically detect the bootloader device. You may sometimes need to
 
 !> If Zadig lists one or more devices with the `HidUsb` driver, your keyboard is probably not in bootloader mode. The arrow will be colored orange and you will be asked to confirm modifying a system driver. **Do not** proceed if this is the case!
 
-If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list. For flashing a USBaspLoader device via command line with msys2, the `libusbk` driver is recommended, otherwise `libusb-win32` will work fine if you are using QMK Toolbox for flashing.
+If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list. USBAspLoader devices must use the `libusbK` driver.
 
 ![Zadig with a bootloader driver correctly installed](https://i.imgur.com/b8VgXzx.png)
 

docs/es/hardware_avr.md

@@ -67,7 +67,7 @@ El archivo `config.h` es donde configuras el hardware y el conjunto de caracter
 
 En la parte superior de `config.h` encontrarás ajustes relacionados con USB. Estos controlan la apariencia de tu teclado en el Sistema Operativo. Si no tienes una buena razón para cambiar debes dejar el `VENDOR_ID` como `0xFEED`. Para el `PRODUCT_ID` debes seleccionar un número que todavía no esté en uso.
 
-Cambia las líneas de `MANUFACTURER`, `PRODUCT`, y `DESCRIPTION` para reflejar con precisión tu teclado.
+Cambia las líneas de `MANUFACTURER` y `PRODUCT` para reflejar con precisión tu teclado.
 
 ```c
 #define VENDOR_ID       0xFEED
@@ -75,7 +75,6 @@ Cambia las líneas de `MANUFACTURER`, `PRODUCT`, y `DESCRIPTION` para reflejar c
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Tú
 #define PRODUCT         mi_teclado_fantastico
-#define DESCRIPTION     Un teclado personalizado
 ```
 
 ?> Windows y macOS mostrarán el `MANUFACTURER` y `PRODUCT` en la lista de dispositivos USB. `lsusb` en Linux toma estos de la lista mantenida por el [Repositorio de ID USB](http://www.linux-usb.org/usb-ids.html) por defecto. `lsusb -v` mostrará los valores reportados por el dispositivo, y también están presentes en los registros del núcleo después de conectarlo.

docs/feature_layers.md

@@ -74,10 +74,9 @@ There are a number of functions (and variables) related to how you can use or ma
 | [`update_tri_layer(x, y, z)`](ref_functions.md#update_tri_layerx-y-z) | Checks if layers `x` and `y` are both on, and sets `z` based on that (on if both on, otherwise off). |
 | [`update_tri_layer_state(state, x, y, z)`](ref_functions.md#update_tri_layer_statestate-x-y-z) | Does the same as `update_tri_layer(x, y, z)`, but from `layer_state_set_*` functions. |
 
+In addition to the functions that you can call, there are a number of callback functions that get called every time the layer changes. This passes the layer state to the function, where it can be read or modified.
 
-In additional to the functions that you can call, there are a number of callback functions that get called every time the layer changes. This passed the layer state to the function, which can be read or modified.
-
-|Callbacks                                     |Description                                                                                    |
+|Callback                                             |Description                                                                             |
 |-----------------------------------------------------|----------------------------------------------------------------------------------------|
 | `layer_state_set_kb(layer_state_t state)`           | Callback for layer functions, for keyboard.                                            |
 | `layer_state_set_user(layer_state_t state)`         | Callback for layer functions, for users.                                               |
@@ -86,9 +85,9 @@ In additional to the functions that you can call, there are a number of callback
 
 ?> For additional details on how you can use these callbacks, check out the [Layer Change Code](custom_quantum_functions.md#layer-change-code) document.
 
-|Check functions                                                  |Description                                                                   |
-|-------------------------------------------|------------------------------------------------------------------------------|
-| `layer_state_cmp(cmp_layer_state, layer)` | This checks the `cmp_layer_state` to see if the specific `layer` is enabled. This is meant for use with the layer callbacks. |
-| `layer_state_is(layer)`                   | This checks the layer state to see if the specific `layer` is enabled. (calls `layer_state_cmp` for the global layer state). |
+It is also possible to check the state of a particular layer using the following functions and macros.
 
-!> There is `IS_LAYER_ON(layer)` as well, however the `layer_state_cmp` function has some additional handling to ensure that on layer 0 that it returns the correct value. Otherwise, if you check to see if layer 0 is on, you may get an incorrect value returned. 
+|Function                         |Description                                                                                      |Aliases
+|---------------------------------|-------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------|
+| `layer_state_is(layer)`         | Checks if the specified `layer` is enabled globally.                                            | `IS_LAYER_ON(layer)`, `IS_LAYER_OFF(layer)`                           |
+| `layer_state_cmp(state, layer)` | Checks `state` to see if the specified `layer` is enabled. Intended for use in layer callbacks. | `IS_LAYER_ON_STATE(state, layer)`, `IS_LAYER_OFF_STATE(state, layer)` |

docs/feature_mouse_keys.md

@@ -39,10 +39,11 @@ In your keymap you can use the following keycodes to map key presses to mouse ac
 
 ## Configuring mouse keys
 
-Mouse keys supports two different modes to move the cursor:
+Mouse keys supports three different modes to move the cursor:
 
 * **Accelerated (default):** Holding movement keys accelerates the cursor until it reaches its maximum speed.
 * **Constant:** Holding movement keys moves the cursor at constant speeds.
+* **Combined:** Holding movement keys accelerates the cursor until it reaches its maximum speed, but holding acceleration and movement keys simultaneously moves the cursor at constant speeds.
 
 The same principle applies to scrolling.
 
@@ -120,3 +121,22 @@ Use the following settings if you want to adjust cursor movement or scrolling:
 |`MK_W_INTERVAL_1`    |120          |Time between scroll steps (`KC_ACL1`)      |
 |`MK_W_OFFSET_2`      |1            |Scroll steps per scroll action (`KC_ACL2`) |
 |`MK_W_INTERVAL_2`    |20           |Time between scroll steps (`KC_ACL2`)      |
+
+### Combined mode
+
+This mode functions like **Accelerated** mode, however, you can hold `KC_ACL0`, `KC_ACL1` and `KC_ACL2`
+to momentarily (while held) set the cursor and scroll speeds to constant speeds. When no acceleration
+keys are held, this mode is identical to **Accelerated** mode, and can be modified using all of the
+relevant settings.
+
+* **KC_ACL0:** This acceleration sets your cursor to the slowest possible speed. This is useful for very
+small and detailed movements of the cursor.
+* **KC_ACL1:** This acceleration sets your cursor to half the maximum (user defined) speed.
+* **KC_ACL2:** This acceleration sets your cursor to the maximum (computer defined) speed. This is
+useful for moving the cursor large distances without much accuracy.
+
+To use constant speed mode, you must at least define `MK_COMBINED` in your keymap’s `config.h` file:
+
+```c
+#define MK_COMBINED
+```

docs/feature_oled_driver.md

@@ -247,6 +247,10 @@ void oled_write_raw_byte(const char data, uint16_t index);
 // Writes a PROGMEM string to the buffer at current cursor position
 void oled_write_raw_P(const char *data, uint16_t size);
 
+// Sets a specific pixel on or off
+// Coordinates start at top-left and go right and down for positive x and y
+void oled_write_pixel(uint8_t x, uint8_t y, bool on);
+
 // Can be used to manually turn on the screen if it is off
 // Returns true if the screen was on or turns on
 bool oled_on(void);

docs/hardware_avr.md

@@ -67,7 +67,7 @@ The `config.h` file is where you configure the hardware and feature set for your
 
 At the top of the `config.h` you'll find USB related settings. These control how your keyboard appears to the Operating System. If you don't have a good reason to change you should leave the `VENDOR_ID` as `0xFEED`. For the `PRODUCT_ID` you should pick a number that is not yet in use.
 
-Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately reflect your keyboard.
+Do change the `MANUFACTURER` and `PRODUCT` lines to accurately reflect your keyboard.
 
 ```c
 #define VENDOR_ID       0xFEED
@@ -75,7 +75,6 @@ Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately r
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    You
 #define PRODUCT         my_awesome_keyboard
-#define DESCRIPTION     A custom keyboard
 ```
 
 ?> Windows and macOS will display the `MANUFACTURER` and `PRODUCT` in the list of USB devices. `lsusb` on Linux instead takes these from the list maintained by the [USB ID Repository](http://www.linux-usb.org/usb-ids.html) by default. `lsusb -v` will show the values reported by the device, and they are also present in kernel logs after plugging it in.

docs/isp_flashing_guide.md

@@ -141,7 +141,9 @@ To do this manually:
 
 ?> It's possible to use other bootloaders here in the same way, but __you need a bootloader__, otherwise you'll have to use ISP again to write new firmware to your keyboard.
 
-To do this the easy way, you can flash the board using the `:production` target when compiling.  This compiles the firmware, then compiles the QMK DFU bootloader, and then creates a combined image.  Once this is done, you'll see three files: 
+#### Create QMK DFU Bootloader and Production images
+
+You can create the firmware, the QMK DFU Bootloader and the production firmware images for the board using the `:production` target when compiling.  Once this is done, you'll see three files: 
 * `<keyboard>_<keymap>.hex`
 * `<keyboard>_<keymap>_bootloader.hex`
 * `<keyboard>_<keymap>_production.hex`
@@ -236,12 +238,12 @@ For Caterina on the `atmega32u4`, these are the fuse settings that you want:
 | Fuse     | Setting|
 |----------|--------|
 | Low      | `0xFF` |
-| High     | `0xD9` |
-| Extended | `0xC3` |
+| High     | `0xD8` |
+| Extended | `0xCB` |
 
-To set this add `-U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xC3:m` to your command.  So the final command should look something like: 
+To set this add `-U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m` to your command.  So the final command should look something like: 
 
-    avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xC3:m
+    avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m
 
 
 If you are using a different controller or want different configuration, you can use [this AVR Fuse Calculator](http://www.engbedded.com/fusecalc/) to find a better value for you.

docs/ja/config_options.md

@@ -48,8 +48,6 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
   * 一般的に、誰もしくはどのブランドがボードを作成したか
 * `#define PRODUCT Board`
   * キーボードの名前
-* `#define DESCRIPTION a keyboard`
-  * キーボードの簡単な説明
 * `#define MATRIX_ROWS 5`
   * キーボードのマトリックスの行の数
 * `#define MATRIX_COLS 15`

docs/ja/feature_debounce_type.md

@@ -0,0 +1,47 @@
+# デバウンスアルゴリズム
+
+<!---
+  original document: 0.9.19:docs/feature_debounce_type.md
+  git diff 0.9.19 HEAD -- docs/feature_debounce_type.md | cat
+-->
+
+QMK はデバウンス API を介して複数のデバウンスアルゴリズムをサポートします。
+
+どのデバウンスメソッドが呼ばれるかのロジックは下記のとおりです。rules.mk で設定された様々な定義をチェックします。
+
+```
+DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
+DEBOUNCE_TYPE?= sym_g
+ifneq ($(strip $(DEBOUNCE_TYPE)), custom)
+    QUANTUM_SRC += $(DEBOUNCE_DIR)/$(strip $(DEBOUNCE_TYPE)).c
+endif
+```
+
+# デバウンスの選択
+
+| DEBOUNCE_TYPE | 説明 | 他に必要なもの |
+| -------------    | ---------------------------------------------------  | ----------------------------- |
+| 未定義 | デフォルトのアルゴリズム、現在のところ sym_g を使います | 無し |
+| custom | 独自のデバウンスコードを使います | ```SRC += debounce.c``` で独自の debounce.c を追加し、必要な関数を実装します |
+| anything_else | quantum/debounce/* から他のアルゴリズムを使います | 無し |
+
+**分割キーボードについて**:
+デバウンスコードは分割キーボードと互換性があります。
+
+# 独自のデバウンスコードの使用
+* ```DEBOUNCE_TYPE = custom``` を設定します。
+* ```SRC += debounce.c``` を追加します。
+* 独自の ```debounce.c``` を追加します。例については、```quantum/debounce``` にある現在の実装をみてください。
+* 毎回のマトリクススキャンの結果はその度デバウンスによって処理されます。
+* MATRIX_ROWS ではなく num_rows を使って、分割キーボードが正しくサポートされるようにします。
+
+# インクルードされているデバウンスメソッド間での切り替え
+独自の debounce.c をインクルードすることで独自のコードを使うか、またはインクルードされている他のコードに切り替えることができます。
+含まれるデバウンスメソッドは以下の通りです:
+* eager_pr - 行ごとにデバウンスします。状態が変化すると、応答は即座に行われ、その後その行は ```DEBOUNCE``` ミリ秒の間入力されません。
+```NUM_KEYS``` の 8ビットカウンタの更新に高い計算コストがかかる、もしくは低スキャンレートのキーボード用で、各指は通常一度に1行しか叩かないようになっています。これは ErgoDox モデルに適しています; マトリックスは90度回転しているため、その「行」は実際には「列」であり、通常の使用では各指は一度に1つの「行」にしか当たりません。
+* eager_pk - キーごとにデバウンスします。状態が変化すると、応答は即座に行われ、その後そのキーは ```DEBOUNCE``` ミリ秒の間入力されません。
+* sym_g - キーボードごとにデバウンスします。状態が変化すると、グローバルタイマが設定されます。```DEBOUNCE``` ミリ秒の間何も変化がなければ、全ての入力の変更がプッシュされます。
+* sym_pk - キーごとにデバウンスします。状態が変化すると、キーごとのタイマーが設定されます。```DEBOUNCE``` ミリ秒の間そのキーに変化がなければ、キーの状態の変更がプッシュされます。
+
+

docs/ja/hardware_avr.md

@@ -73,7 +73,7 @@ or open the directory in your favourite text editor.
 
 `config.h` の先頭には USB に関する設定があります。これらはキーボードが OS からどのように見えるかを制御しています。変更する理由がない場合は、`VENDOR_ID` を `0xFEED` のままにしておく必要があります。`PRODUCT_ID` にはまだ使用されていない番号を選ばなければいけません。
 
-`MANUFACTURER`、 `PRODUCT`、 `DESCRIPTION` をキーボードにあった設定に変更します。
+`MANUFACTURER`、 `PRODUCT` をキーボードにあった設定に変更します。
 
 ```c
 #define VENDOR_ID       0xFEED
@@ -81,7 +81,6 @@ or open the directory in your favourite text editor.
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    You
 #define PRODUCT         my_awesome_keyboard
-#define DESCRIPTION     A custom keyboard
 ```
 
 ?> Windows や macOS では、`MANUFACTURER` と `PRODUCT` が USBデバイスのリストに表示されます。Linux 上の `lsusb` では、代わりにデフォルトで [USB ID Repository](http://www.linux-usb.org/usb-ids.html) によって維持されているリストからこれらを取得します。`lsusb -v` を使用するとデバイスから示された値を表示します。また、接続したときのカーネルログにも表示されます。

drivers/oled/oled_driver.c

@@ -462,6 +462,19 @@ void oled_write_raw(const char *data, uint16_t size) {
     }
 }
 
+void oled_write_pixel(uint8_t x, uint8_t y, bool on) {
+    if (x >= OLED_DISPLAY_WIDTH || y >= OLED_DISPLAY_HEIGHT) {
+        return;
+    }
+    uint16_t index = x + (y / 8) * OLED_DISPLAY_WIDTH;
+    if (on) {
+        oled_buffer[index] |= (1 << (y % 8));
+    } else {
+        oled_buffer[index] &= ~(1 << (y % 8));
+    }
+    oled_dirty |= (1 << (index / OLED_BLOCK_SIZE));
+}
+
 #if defined(__AVR__)
 void oled_write_P(const char *data, bool invert) {
     uint8_t c = pgm_read_byte(data);

drivers/oled/oled_driver.h

@@ -206,6 +206,10 @@ void oled_pan(bool left);
 void oled_write_raw(const char *data, uint16_t size);
 void oled_write_raw_byte(const char data, uint16_t index);
 
+// Sets a specific pixel on or off
+// Coordinates start at top-left and go right and down for positive x and y
+void oled_write_pixel(uint8_t x, uint8_t y, bool on);
+
 #if defined(__AVR__)
 // Writes a PROGMEM string to the buffer at current cursor position
 // Advances the cursor while writing, inverts the pixels if true

keyboards/adelheid/adelheid.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 floookay
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "adelheid.h"

keyboards/adelheid/adelheid.h

@@ -0,0 +1,45 @@
+/* Copyright 2020 floookay
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C,      k0D, k0E, \
+	                                                                                \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k2E, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,      k3E, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,           k4E, \
+	k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B,      k4D,           \
+	k50,      k52,      k54, k55,      k57,      k59,           k5C, k5D, k5E       \
+) \
+{ \
+	{ k00,   k01,   k02,   k03,   k04,   k05,   k06,   k07,   k08,   k09,   k0A,   k0B,   k0C,   k0D,   k0E   }, \
+	{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+	{ k10,   k11,   k12,   k13,   k14,   k15,   k16,   k17,   k18,   k19,   k1A,   k1B,   k1C,   k1D,   k1E   }, \
+	{ k20,   k21,   k22,   k23,   k24,   k25,   k26,   k27,   k28,   k29,   k2A,   k2B,   k2C,   k2D,   k2E   }, \
+	{ k30,   k31,   k32,   k33,   k34,   k35,   k36,   k37,   k38,   k39,   k3A,   k3B,   k3C,   KC_NO, k3E   }, \
+	{ k40,   k41,   k42,   k43,   k44,   k45,   k46,   k47,   k48,   k49,   k4A,   k4B,   KC_NO, k4D,   k4E   }, \
+	{ k50,   KC_NO, k52,   KC_NO, k54,   k55,   KC_NO, k57,   KC_NO, k59,   KC_NO, KC_NO, k5C,   k5D,   k5E   }  \
+}

keyboards/adelheid/config.h

@@ -0,0 +1,208 @@
+/*
+Copyright 2020 floookay
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xF100
+#define PRODUCT_ID      0xAD78
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    floookay
+#define PRODUCT         adelheid
+#define DESCRIPTION     75% alice-like keyboard based on the arisu
+
+/* key matrix size */
+#define MATRIX_ROWS 7
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, F4, D1, D2, D3, D5, F7 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, F6, B6, D4, B1, B0, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN C6
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1

keyboards/adelheid/info.json

@@ -0,0 +1,100 @@
+{
+    "keyboard_name": "Adelheid",
+    "url": "https://github.com/floookay/adelheid",
+    "maintainer": "floookay",
+    "width": 19.5,
+    "height": 6.5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "label": "k00", "x": 0, "y": 0 },
+                { "label": "k01", "x": 1.25, "y": 0 },
+                { "label": "k02", "x": 2.25, "y": 0 },
+                { "label": "k03", "x": 3.5, "y": 0 },
+                { "label": "k04", "x": 4.5, "y": 0 },
+                { "label": "k05", "x": 5.75, "y": 0 },
+                { "label": "k06", "x": 6.75, "y": 0 },
+                { "label": "k07", "x": 9.75, "y": 0 },
+                { "label": "k08", "x": 10.75, "y": 0 },
+                { "label": "k09", "x": 12, "y": 0 },
+                { "label": "k0A", "x": 13, "y": 0 },
+                { "label": "k0B", "x": 14.25, "y": 0 },
+                { "label": "k0C", "x": 15.25, "y": 0 },
+                { "label": "k0D", "x": 16.5, "y": 0 },
+                { "label": "k0E", "x": 17.75, "y": 0 },
+
+                { "label": "k10", "x": 0.75, "y": 1.25 },
+                { "label": "k11", "x": 1.75, "y": 1.25 },
+                { "label": "k12", "x": 2.75, "y": 1.25 },
+                { "label": "k13", "x": 4, "y": 1.25 },
+                { "label": "k14", "x": 5, "y": 1.25 },
+                { "label": "k15", "x": 6, "y": 1.25 },
+                { "label": "k16", "x": 7, "y": 1.25 },
+                { "label": "k17", "x": 9.5, "y": 1.25 },
+                { "label": "k18", "x": 10.5, "y": 1.25 },
+                { "label": "k19", "x": 11.5, "y": 1.25 },
+                { "label": "k1A", "x": 12.5, "y": 1.25 },
+                { "label": "k1B", "x": 13.75, "y": 1.25 },
+                { "label": "k1C", "x": 14.75, "y": 1.25 },
+                { "label": "k1D", "x": 15.75, "y": 1.25 },
+                { "label": "k1E", "x": 16.75, "y": 1.25 },
+                { "label": "k2E", "x": 18, "y": 1 },
+
+                { "label": "k20", "x": 0.5, "y": 2.25, "w": 1.5 },
+                { "label": "k21", "x": 2, "y": 2.25 },
+                { "label": "k22", "x": 3.5, "y": 2.25 },
+                { "label": "k23", "x": 4.5, "y": 2.25 },
+                { "label": "k24", "x": 5.5, "y": 2.25 },
+                { "label": "k25", "x": 6.5, "y": 2.25 },
+                { "label": "k26", "x": 9, "y": 2.25 },
+                { "label": "k27", "x": 10, "y": 2.25 },
+                { "label": "k28", "x": 11, "y": 2.25 },
+                { "label": "k29", "x": 12, "y": 2.25 },
+                { "label": "k2A", "x": 13, "y": 2.25 },
+                { "label": "k2B", "x": 14.5, "y": 2.25 },
+                { "label": "k2C", "x": 15.5, "y": 2.25 },
+                { "label": "k2D", "x": 16.5, "y": 2.25, "w": 1.5 },
+                { "label": "k3E", "x": 18.25, "y": 2 },
+
+                { "label": "k30", "x": 0.25, "y": 3.25, "w": 1.75 },
+                { "label": "k31", "x": 2, "y": 3.25 },
+                { "label": "k32", "x": 3.75, "y": 3.25 },
+                { "label": "k33", "x": 4.75, "y": 3.25 },
+                { "label": "k34", "x": 5.75, "y": 3.25 },
+                { "label": "k35", "x": 6.75, "y": 3.25 },
+                { "label": "k36", "x": 9.25, "y": 3.25 },
+                { "label": "k37", "x": 10.25, "y": 3.25 },
+                { "label": "k38", "x": 11.25, "y": 3.25 },
+                { "label": "k39", "x": 12.25, "y": 3.25 },
+                { "label": "k3A", "x": 14, "y": 3.25 },
+                { "label": "k3B", "x": 15, "y": 3.25 },
+                { "label": "k3C", "x": 16, "y": 3.25, "w": 2.25 },
+                { "label": "k4E", "x": 18.5, "y": 3 },
+
+                { "label": "k40", "x": 0, "y": 4.25, "w": 2.25 },
+                { "label": "k41", "x": 2.25, "y": 4.25 },
+                { "label": "k42", "x": 4.25, "y": 4.25 },
+                { "label": "k43", "x": 5.25, "y": 4.25 },
+                { "label": "k44", "x": 6.25, "y": 4.25 },
+                { "label": "k45", "x": 7.25, "y": 4.25 },
+                { "label": "k46", "x": 9.5, "y": 4.25 },
+                { "label": "k47", "x": 10.5, "y": 4.25 },
+                { "label": "k48", "x": 11.5, "y": 4.25 },
+                { "label": "k49", "x": 12.5, "y": 4.25 },
+                { "label": "k4A", "x": 14.5, "y": 4.25 },
+                { "label": "k4B", "x": 15.5, "y": 4.25, "w": 1.75 },
+                { "label": "k4D", "x": 17.5, "y": 4.5 },
+
+                { "label": "k50", "x": 0, "y": 5.25, "w": 1.5 },
+                { "label": "k52", "x": 4.25, "y": 5.25, "w": 1.5 },
+                { "label": "k54", "x": 5.75, "y": 5.25, "w": 2 },
+                { "label": "k55", "x": 7.75, "y": 5.25 },
+                { "label": "k57", "x": 9, "y": 5.25, "w": 2.75 },
+                { "label": "k59", "x": 11.75, "y": 5.25, "w": 1.5 },
+                { "label": "k5C", "x": 16.5, "y": 5.5 },
+                { "label": "k5D", "x": 17.5, "y": 5.5 },
+                { "label": "k5E", "x": 18.5, "y": 5.5 }
+            ]
+        }
+    }
+}

keyboards/adelheid/keymaps/default/keymap.c

@@ -0,0 +1,45 @@
+/* Copyright 2020 floookay
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum adelheid_layers {
+  _BASE,
+  _SECONDARY
+};
+
+#define MO_SEC MO(_SECONDARY)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_F13,  KC_PGUP,
+
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  KC_HOME,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          KC_END,
+    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_PGDN,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,
+    KC_LCTL,          KC_LALT,          KC_SPC,  MO_SEC,           KC_SPC,           KC_RALT,                   KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+
+  [_SECONDARY] = LAYOUT(
+    KC_SLEP, KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24,           KC_PSCR, KC_VOLU,
+
+    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, KC_INS,  BL_STEP,
+    _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  _______, _______, _______, KC_DEL,           KC_MUTE,
+    KC_LGUI, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______, KC_MPLY,                   KC_VOLD,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          KC_MPLY,
+    _______,          _______,          _______, _______,          _______,          _______,                   KC_MPRV, KC_MSTP, KC_MNXT
+  )
+};

keyboards/adelheid/keymaps/default/readme.md

@@ -0,0 +1,9 @@
+# Default keymap for the Adelheid
+
+- ANSI QWERTY
+- split backspace
+- ctrl instead of caps lock
+- lgui on fn+caps
+
+![adelheid_layout](https://gist.githubusercontent.com/floookay/7bf6511a8d84804d32de4d7bbe3bd0fb/raw/dffd622a762463f341466ffecefad3b31ad3ee4f/layout.png)  
+View in [Keyboard-Layout-Editor](http://www.keyboard-layout-editor.com/#/gists/4262535adb5ac81a913edbebc4de8226).

keyboards/adelheid/keymaps/floookay/keymap.c

@@ -0,0 +1,76 @@
+/* Copyright 2020 floookay
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum adelheid_layers {
+  _BASE,
+  _SECONDARY
+};
+
+// tap dance declarations
+enum {
+    _TD_CTGU = 0,
+    _TD_PGUP = 1,
+    _TD_PGDN = 2,
+    _TD_HOME = 3,
+    _TD_END  = 4,
+    _TD_RSHC = 5,
+    _TD_PSCR = 6
+};
+
+#define MO_SEC MO(_SECONDARY)
+#define TD_CTGU TD(_TD_CTGU)
+#define TD_PGUP TD(_TD_PGUP)
+#define TD_PGDN TD(_TD_PGDN)
+#define TD_HOME TD(_TD_HOME)
+#define TD_END TD(_TD_END)
+#define TD_RSHC TD(_TD_RSHC)
+#define TD_PSCR TD(_TD_PSCR)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_F13,  TD_PGUP,
+
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  TD_HOME,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          TD_END,
+    TD_CTGU, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    TD_PGDN,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,
+    KC_LCTL,          KC_LALT,          KC_SPC,  MO_SEC,           KC_SPC,           KC_RALT,                   KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+
+  [_SECONDARY] = LAYOUT(
+    KC_SLEP, KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24,           TD_PSCR, KC_VOLU,
+
+    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, KC_INS,  BL_STEP,
+    _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  _______, _______, _______, KC_DEL,           KC_MUTE,
+    _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______, KC_MPLY,                   KC_VOLD,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, TD_RSHC,          KC_MPLY,
+    _______,          _______,          _______, _______,          _______,          _______,                   KC_MPRV, KC_MSTP, KC_MNXT
+  )
+};
+
+
+// Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+    // Tap once for first parameter, twice for second
+    [_TD_CTGU] = ACTION_TAP_DANCE_DOUBLE(KC_LCTL, KC_LGUI),
+    [_TD_PGUP] = ACTION_TAP_DANCE_DOUBLE(KC_PGUP, LCTL(KC_PGUP)),
+    [_TD_PGDN] = ACTION_TAP_DANCE_DOUBLE(KC_PGDN, LCTL(KC_PGDN)),
+    [_TD_HOME] = ACTION_TAP_DANCE_DOUBLE(KC_HOME, LCTL(KC_HOME)),
+    [_TD_END]  = ACTION_TAP_DANCE_DOUBLE(KC_END,  LCTL(KC_END)),
+    [_TD_RSHC] = ACTION_TAP_DANCE_DOUBLE(KC_RSFT, KC_CAPS),
+    [_TD_PSCR] = ACTION_TAP_DANCE_DOUBLE(KC_PSCR, LSFT(LGUI(KC_S))) // screenshot tool tap dance
+};

keyboards/adelheid/keymaps/floookay/readme.md

@@ -0,0 +1,9 @@
+# The default keymap for the Adelheid
+
+- ANSI QWERTY
+- split backspace
+- ctrl on caps lock with super on tap dance
+- caps lock on fn + right shift tap dance
+
+![adelheid_layout](https://gist.githubusercontent.com/floookay/7bf6511a8d84804d32de4d7bbe3bd0fb/raw/dffd622a762463f341466ffecefad3b31ad3ee4f/layout.png)  
+View in [Keyboard-Layout-Editor](http://www.keyboard-layout-editor.com/#/gists/4262535adb5ac81a913edbebc4de8226).

keyboards/adelheid/keymaps/floookay/rules.mk

@@ -0,0 +1 @@
+TAP_DANCE_ENABLE = yes

keyboards/adelheid/readme.md

@@ -0,0 +1,15 @@
+# 𝔄𝔡𝔢𝔩𝔥𝔢𝔦𝔡
+
+![Adelheid](https://gist.githubusercontent.com/floookay/7bf6511a8d84804d32de4d7bbe3bd0fb/raw/559336bcb5f8c04bbea9ad8aab7397812ab72859/adelheid.jpg)
+
+The Adelheid is a 75% Alice-like keyboard. It's a fork of the [Arisu](https://github.com/FateNozomi/arisu-pcb) by FateNozomi and is open-source as well.
+
+* Keyboard Maintainer: [floookay](https://github.com/floookay)
+* Hardware Supported: Adelheid PCB [Rev2.0]
+* Hardware Availability: [PCB-, case- & wrist rest files](https://github.com/floookay/adelheid)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make adelheid:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/adelheid/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/handwired/ferris/config.h

@@ -0,0 +1,60 @@
+/*
+Copyright 2020 Pierre Chevalier <pierrechevalier83@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xC2AB
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Pierre
+#define PRODUCT Ferris the keeb
+#define DESCRIPTION A minimalistic 34 - keys split keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 10
+
+#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
+#define MATRIX_COLS_PER_SIDE (MATRIX_COLS / 2)
+
+#define UNUSED_MCU 14
+#define UNUSED_MCP 7
+
+// wiring
+#define MATRIX_ROW_PINS_MCU \
+    { B3, B2, B1, F0 }
+#define MATRIX_COL_PINS_MCU \
+    { D6, D7, B4, B5, B6 }
+#define UNUSED_PINS_MCU \
+    { B0, B7, C6, C7, D2, D3, D4, D5, E6, F1, F4, F5, F6, F7 }
+#define MATRIX_ROW_PINS_MCP \
+    { B0, B1, B2, B3 }
+#define MATRIX_COL_PINS_MCP \
+    { A0, A1, A2, A3, A4 }
+#define UNUSED_PINS_MCP \
+    { B4, B5, B6, B7, A5, A6, A7 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+

keyboards/handwired/ferris/ferris.c

@@ -1,5 +1,5 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2020 Pierre Chevalier <pierrechevalier83@gmail.com>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -14,17 +14,4 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-
-#pragma once
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0xCAFE
-#define DEVICE_VER      0x0814
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         USB to USB keyboard converter
-
-#define DESCRIPTION     Product from t.m.k. keyboard firmware project
-
-/* matrix size */
-#define MATRIX_ROWS 32
-#define MATRIX_COLS 8
+#include "ferris.h"

keyboards/handwired/ferris/ferris.h

@@ -0,0 +1,43 @@
+/*
+Copyright 2020 Pierre Chevalier <pierrechevalier83@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+// clang-format off
+
+/*              left hand                           right hand      */
+#define LAYOUT(\
+    K0_0, K0_1, K0_2, K0_3, K0_4,       K0_5, K0_6, K0_7, K0_8, K0_9,\
+    K1_0, K1_1, K1_2, K1_3, K1_4,       K1_5, K1_6, K1_7, K1_8, K1_9,\
+    K2_0, K2_1, K2_2, K2_3, K2_4,       K2_5, K2_6, K2_7, K2_8, K2_9,\
+                        K3_3, K3_4,   K3_5, K3_6)\
+/* matrix positions */\
+{\
+    {K0_0,  K0_1,  K0_2,  K0_3,  K0_4},\
+    {K1_0,  K1_1,  K1_2,  K1_3,  K1_4},\
+    {K2_0,  K2_1,  K2_2,  K2_3,  K2_4},\
+    {KC_NO, KC_NO, KC_NO, K3_3,  K3_4},\
+	\
+	{K0_5,  K0_6,  K0_7,  K0_8,  K0_9},\
+	{K1_5,  K1_6,  K1_7,  K1_8,  K1_9},\
+	{K2_5,  K2_6,  K2_7,  K2_8,  K2_9},\
+	{K3_5,  K3_6, KC_NO,  KC_NO, KC_NO}\
+}
+
+// clang-format on

keyboards/handwired/ferris/info.json

@@ -0,0 +1,54 @@
+{
+    "keyboard_name": "Ferris",
+    "url": "https://github.com/pierrechevalier83/ferris/",
+    "maintainer": "@pierrec83",
+    "width": 12,
+    "height": 4.75,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x": 0, "y": 0.93},
+                {"x": 1, "y": 0.31},
+                {"x": 2, "y": 0},
+                {"x": 3, "y": 0.28},
+                {"x": 4, "y": 0.42},
+
+                {"x": 7, "y": 0.42},
+                {"x": 8, "y": 0.28},
+                {"x": 9, "y": 0},
+                {"x": 10, "y": 0.31},
+                {"x": 11, "y": 0.93},
+
+                {"x": 0, "y": 1.93},
+                {"x": 1, "y": 1.31},
+                {"x": 2, "y": 1},
+                {"x": 3, "y": 1.28},
+                {"x": 4, "y": 1.42},
+
+                {"x": 7, "y": 1.42},
+                {"x": 8, "y": 1.28},
+                {"x": 9, "y": 1},
+                {"x": 10, "y": 1.31},
+                {"x": 11, "y": 1.93},
+
+                {"x": 0, "y": 2.93},
+                {"x": 1, "y": 2.31},
+                {"x": 2, "y": 2},
+                {"x": 3, "y": 2.28},
+                {"x": 4, "y": 2.42},
+
+                {"x": 7, "y": 2.42},
+                {"x": 8, "y": 2.28},
+                {"x": 9, "y": 2},
+                {"x": 10, "y": 2.31},
+                {"x": 11, "y": 2.93},
+
+                {"x": 3.5, "y": 3.75},
+                {"x": 4.5, "y": 4},
+
+                {"x": 6.5, "y": 4},
+                {"x": 7.5, "y": 3.75}
+            ]
+        }
+    }
+}