blender/source/blenderplayer/CMakeLists.txt

233 lines
5.5 KiB
CMake
Raw Normal View History

# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
2010-02-12 13:34:04 +00:00
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# The Original Code is Copyright (C) 2006, Blender Foundation
# All rights reserved.
#
# The Original Code is: all of this file.
#
# Contributor(s): Jacques Beaurain.
#
# ***** END GPL LICENSE BLOCK *****
# message(STATUS "Configuring blenderplayer")
setup_libdirs()
if(WITH_CODEC_QUICKTIME)
add_definitions(-DWITH_QUICKTIME)
endif()
if(WIN32 AND NOT UNIX)
2011-04-08 22:07:17 +00:00
string(SUBSTRING ${BLENDER_VERSION} 0 1 bver1)
string(SUBSTRING ${BLENDER_VERSION} 2 1 bver2)
string(SUBSTRING ${BLENDER_VERSION} 3 1 bver3)
if(MINGW)
add_definitions(
-DWINDRES
-DBLEN_VER_RC_STR_M=${BLENDER_VERSION}
-DBLEN_VER_RC_1=${bver1}
-DBLEN_VER_RC_2=${bver2}
-DBLEN_VER_RC_3=${bver3}
-DBLEN_VER_RC_4=0
)
else()
add_definitions(
-DBLEN_VER_RC_STR=${BLENDER_VERSION}
-DBLEN_VER_RC_1=${bver1}
-DBLEN_VER_RC_2=${bver2}
-DBLEN_VER_RC_3=${bver3}
-DBLEN_VER_RC_4=0
)
endif()
add_executable(blenderplayer ${EXETYPE} bad_level_call_stubs/stubs.c ../icons/winblender.rc)
2011-09-27 10:51:57 +00:00
elseif(APPLE)
add_executable(blenderplayer ${EXETYPE} bad_level_call_stubs/stubs.c)
2011-09-27 10:51:57 +00:00
# setup Info.plist
execute_process(COMMAND date "+%Y-%m-%d" OUTPUT_VARIABLE BLENDER_DATE OUTPUT_STRIP_TRAILING_WHITESPACE)
set(PLAYER_SOURCEDIR ${CMAKE_SOURCE_DIR}/release/darwin/blenderplayer.app)
2011-09-27 10:51:57 +00:00
set(PLAYER_SOURCEINFO ${PLAYER_SOURCEDIR}/Contents/Info.plist)
set_target_properties(blenderplayer PROPERTIES
MACOSX_BUNDLE_INFO_PLIST ${PLAYER_SOURCEINFO}
MACOSX_BUNDLE_SHORT_VERSION_STRING ${BLENDER_VERSION}
MACOSX_BUNDLE_LONG_VERSION_STRING "${BLENDER_VERSION} ${BLENDER_DATE}")
else()
add_executable(blenderplayer bad_level_call_stubs/stubs.c)
endif()
add_dependencies(blenderplayer makesdna)
get_property(BLENDER_LINK_LIBS GLOBAL PROPERTY BLENDER_LINK_LIBS)
list(APPEND BLENDER_LINK_LIBS
ge_player_common
ge_player_ghost
blenkernel_blc
)
if(CMAKE_SYSTEM_NAME MATCHES "Linux")
list(APPEND BLENDER_LINK_LIBS extern_binreloc)
endif()
# if(UNIX)
# Sort libraries
set(BLENDER_SORTED_LIBS
ge_player_ghost
ge_player_common
2010-08-24 04:29:23 +00:00
bf_intern_string
bf_intern_ghost
bf_rna
2011-04-15 01:19:13 +00:00
bf_bmesh
bf_blenkernel
bf_intern_rigidbody
2012-05-29 10:31:42 +00:00
bf_blenloader
ge_blen_routines
bf_editor_datafiles
ge_converter
ge_logic_ketsji
ge_phys_bullet
ge_phys_dummy
ge_logic
ge_rasterizer
ge_oglrasterizer
ge_logic_expressions
ge_scenegraph
bf_ikplugin
bf_intern_itasc
2012-08-18 13:36:29 +00:00
bf_intern_iksolver
bf_intern_smoke
bf_modifiers
2010-08-24 04:29:23 +00:00
bf_intern_moto
bf_nodes
bf_gpu
bf_imbuf
bf_avi
ge_logic_network
ge_logic_ngnetwork
ge_logic_loopbacknetwork
extern_bullet
2010-09-07 05:47:34 +00:00
bf_intern_guardedalloc
bf_intern_memutil
bf_python_ext
2011-07-15 04:01:47 +00:00
bf_python_mathutils
bf_python_bmesh
bf_blenlib
bf_intern_utfconv
bf_imbuf_cineon
bf_imbuf_openexr
extern_openjpeg
extern_redcode
bf_imbuf_dds
bf_dna
ge_videotex
bf_blenfont
2010-09-07 05:47:34 +00:00
bf_intern_audaspace
blenkernel_blc
2011-04-15 01:19:13 +00:00
bf_bmesh
extern_binreloc
2010-09-15 19:03:52 +00:00
extern_minilzo
bf_intern_ghost # duplicate for linking
bf_blenkernel # duplicate for linking
2011-02-15 12:43:34 +00:00
bf_intern_mikktspace
partial fix for blenderplayer linking problems (decast retour) This fix the problem of linking the extern components for the KX module. The remaining linking issues are related to actual bad level access so the fix is a bit more complex. Remaining linking issues (osx cmake gcc) ########### Undefined symbols: "_buildNavMeshDataByDerivedMesh", referenced from: KX_NavMeshObject::BuildVertIndArrays(float*&, int&, unsigned short*&, int&, unsigned short*&, float*&, int&, unsigned short*&, int&, int&)in libge_logic_ketsji.a(KX_NavMeshObject.cpp.o) _applyModifier in libbf_modifiers.a(MOD_navmesh.cpp.o) "_polyIsConvex", referenced from: _applyModifier in libbf_modifiers.a(MOD_navmesh.cpp.o) "_polyNumVerts", referenced from: KX_NavMeshObject::BuildVertIndArrays(float*&, int&, unsigned short*&, int&, unsigned short*&, float*&, int&, unsigned short*&, int&, int&)in libge_logic_ketsji.a(KX_NavMeshObject.cpp.o) "_polyFindVertex", referenced from: KX_NavMeshObject::BuildVertIndArrays(float*&, int&, unsigned short*&, int&, unsigned short*&, float*&, int&, unsigned short*&, int&, int&)in libge_logic_ketsji.a(KX_NavMeshObject.cpp.o) KX_NavMeshObject::BuildVertIndArrays(float*&, int&, unsigned short*&, int&, unsigned short*&, float*&, int&, unsigned short*&, int&, int&)in libge_logic_ketsji.a(KX_NavMeshObject.cpp.o) KX_NavMeshObject::BuildVertIndArrays(float*&, int&, unsigned short*&, int&, unsigned short*&, float*&, int&, unsigned short*&, int&, int&)in libge_logic_ketsji.a(KX_NavMeshObject.cpp.o) ############
2011-09-11 08:21:26 +00:00
extern_recastnavigation
bf_intern_raskter
Color Management, Stage 2: Switch color pipeline to use OpenColorIO Replace old color pipeline which was supporting linear/sRGB color spaces only with OpenColorIO-based pipeline. This introduces two configurable color spaces: - Input color space for images and movie clips. This space is used to convert images/movies from color space in which file is saved to Blender's linear space (for float images, byte images are not internally converted, only input space is stored for such images and used later). This setting could be found in image/clip data block settings. - Display color space which defines space in which particular display is working. This settings could be found in scene's Color Management panel. When render result is being displayed on the screen, apart from converting image to display space, some additional conversions could happen. This conversions are: - View, which defines tone curve applying before display transformation. These are different ways to view the image on the same display device. For example it could be used to emulate film view on sRGB display. - Exposure affects on image exposure before tone map is applied. - Gamma is post-display gamma correction, could be used to match particular display gamma. - RGB curves are user-defined curves which are applying before display transformation, could be used for different purposes. All this settings by default are only applying on render result and does not affect on other images. If some particular image needs to be affected by this transformation, "View as Render" setting of image data block should be set to truth. Movie clips are always affected by all display transformations. This commit also introduces configurable color space in which sequencer is working. This setting could be found in scene's Color Management panel and it should be used if such stuff as grading needs to be done in color space different from sRGB (i.e. when Film view on sRGB display is use, using VD16 space as sequencer's internal space would make grading working in space which is close to the space using for display). Some technical notes: - Image buffer's float buffer is now always in linear space, even if it was created from 16bit byte images. - Space of byte buffer is stored in image buffer's rect_colorspace property. - Profile of image buffer was removed since it's not longer meaningful. - OpenGL and GLSL is supposed to always work in sRGB space. It is possible to support other spaces, but it's quite large project which isn't so much important. - Legacy Color Management option disabled is emulated by using None display. It could have some regressions, but there's no clear way to avoid them. - If OpenColorIO is disabled on build time, it should make blender behaving in the same way as previous release with color management enabled. More details could be found at this page (more details would be added soon): http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management -- Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO integration and to Brecht van Lommel for some further development and code/ usecase review!
2012-09-15 10:05:07 +00:00
bf_intern_opencolorio
bf_intern_opennl
extern_rangetree
extern_wcwidth
)
if(WITH_MOD_CLOTH_ELTOPO)
list(APPEND BLENDER_SORTED_LIBS extern_eltopo)
endif()
if(NOT WITH_SYSTEM_GLEW)
list(APPEND BLENDER_SORTED_LIBS extern_glew)
endif()
if(WITH_LZMA)
list(APPEND BLENDER_SORTED_LIBS extern_lzma)
endif()
Camera tracking integration =========================== Commiting camera tracking integration gsoc project into trunk. This commit includes: - Bundled version of libmv library (with some changes against official repo, re-sync with libmv repo a bit later) - New datatype ID called MovieClip which is optimized to work with movie clips (both of movie files and image sequences) and doing camera/motion tracking operations. - New editor called Clip Editor which is currently used for motion/tracking stuff only, but which can be easily extended to work with masks too. This editor supports: * Loading movie files/image sequences * Build proxies with different size for loaded movie clip, also supports building undistorted proxies to increase speed of playback in undistorted mode. * Manual lens distortion mode calibration using grid and grease pencil * Supervised 2D tracking using two different algorithms KLT and SAD. * Basic algorithm for feature detection * Camera motion solving. scene orientation - New constraints to "link" scene objects with solved motions from clip: * Follow Track (make object follow 2D motion of track with given name or parent object to reconstructed 3D position of track) * Camera Solver to make camera moving in the same way as reconstructed camera This commit NOT includes changes from tomato branch: - New nodes (they'll be commited as separated patch) - Automatic image offset guessing for image input node and image editor (need to do more tests and gather more feedback) - Code cleanup in libmv-capi. It's not so critical cleanup, just increasing readability and understanadability of code. Better to make this chaneg when Keir will finish his current patch. More details about this project can be found on this page: http://wiki.blender.org/index.php/User:Nazg-gul/GSoC-2011 Further development of small features would be done in trunk, bigger/experimental features would first be implemented in tomato branch.
2011-11-07 12:55:18 +00:00
if(WITH_LIBMV)
list(APPEND BLENDER_SORTED_LIBS extern_libmv)
Initial Ceres integration into Blender Currently only put sources of Ceres library into extern/libmv/third_party and setup CMake and SCons building systems. Integration details: - Even CMake build files are not re-used from Ceres's trunk: they're using some automatic stuff detection like glog, pthreads, protobuf and so and it's not so clear how to re-use that files without modifications. And IMO it's easier if build files are getting re-generated automatically to match Blender-specific setup rather than keeping changes made locally in Blender in sync when re-bundling Ceres library. Especially in case when it's already needed to support SCons build system. - Integrated only actual sources, all tests were stripped. Probably it'll be nice to have them, but they'll need clear integration with current module test stuff in Blender. - Suitesparse was disabled. It'll help a lot having it, but there are some difficulties making cholmod working fine on windows. Would be added in future - collections_port.cc was also stripped. It's not used by Ceres's upstream and it gives compilation error (undefined uint32 -- looks like namespace issue). - Currently all schur eliminators are included. Not sure if it makes sense, also not sure if it makes sense having them switchable on and off -- IMO better to have single configuration which works and does not require special tweaks after everything was set up. To bundle updated version of Ceres: - Go to extern/libmv/third_party/ceres folder - Run ./bundle.sh This will checkout fresh Ceres snapshot of Windows branch (which is currently most interesting from integration into Blender POV), apply all patches listed in patches/series and copy needed files into Blender's working copy. This will also re-generate CMake/SCons build rules. If you'll need extra files from Ceres repository which are not present in Blender, you'll need to copy them manually and then run ./mkfiles.sh from extern/libmv/third_party/ceres folder which will update list of files used by Blender. Thanks to Leir Mierle and Sameer Agarwal (and all others who helped developing Ceres) this library and thanks to Keir Mierle with help integrating it into Blender!
2012-06-10 15:27:41 +00:00
list(APPEND BLENDER_SORTED_LIBS extern_ceres)
Camera tracking integration =========================== Commiting camera tracking integration gsoc project into trunk. This commit includes: - Bundled version of libmv library (with some changes against official repo, re-sync with libmv repo a bit later) - New datatype ID called MovieClip which is optimized to work with movie clips (both of movie files and image sequences) and doing camera/motion tracking operations. - New editor called Clip Editor which is currently used for motion/tracking stuff only, but which can be easily extended to work with masks too. This editor supports: * Loading movie files/image sequences * Build proxies with different size for loaded movie clip, also supports building undistorted proxies to increase speed of playback in undistorted mode. * Manual lens distortion mode calibration using grid and grease pencil * Supervised 2D tracking using two different algorithms KLT and SAD. * Basic algorithm for feature detection * Camera motion solving. scene orientation - New constraints to "link" scene objects with solved motions from clip: * Follow Track (make object follow 2D motion of track with given name or parent object to reconstructed 3D position of track) * Camera Solver to make camera moving in the same way as reconstructed camera This commit NOT includes changes from tomato branch: - New nodes (they'll be commited as separated patch) - Automatic image offset guessing for image input node and image editor (need to do more tests and gather more feedback) - Code cleanup in libmv-capi. It's not so critical cleanup, just increasing readability and understanadability of code. Better to make this chaneg when Keir will finish his current patch. More details about this project can be found on this page: http://wiki.blender.org/index.php/User:Nazg-gul/GSoC-2011 Further development of small features would be done in trunk, bigger/experimental features would first be implemented in tomato branch.
2011-11-07 12:55:18 +00:00
endif()
list(APPEND BLENDER_SORTED_LIBS extern_colamd)
if(WITH_MOD_BOOLEAN)
list(APPEND BLENDER_SORTED_LIBS bf_intern_bsp)
list(APPEND BLENDER_SORTED_LIBS bf_intern_moto)
endif()
if(WITH_MOD_BOOLEAN)
list(APPEND BLENDER_SORTED_LIBS extern_carve)
endif()
if(WITH_GHOST_XDND)
list(APPEND BLENDER_SORTED_LIBS extern_xdnd)
endif()
if(WITH_CODEC_QUICKTIME)
list(APPEND BLENDER_SORTED_LIBS bf_quicktime)
endif()
if(WITH_CXX_GUARDEDALLOC)
list(APPEND BLENDER_SORTED_LIBS bf_intern_guardedalloc_cpp)
endif()
if(WITH_INTERNATIONAL)
list(APPEND BLENDER_SORTED_LIBS bf_intern_locale)
endif()
foreach(SORTLIB ${BLENDER_SORTED_LIBS})
set(REMLIB ${SORTLIB})
foreach(SEARCHLIB ${BLENDER_LINK_LIBS})
if(${SEARCHLIB} STREQUAL ${SORTLIB})
set(REMLIB "")
endif()
endforeach()
if(REMLIB)
# message(STATUS "Removing library ${REMLIB} from blenderplayer linking because: not configured")
list(APPEND REM_MSG ${REMLIB})
list(REMOVE_ITEM BLENDER_SORTED_LIBS ${REMLIB})
endif()
endforeach()
if(REM_MSG)
list(SORT REM_MSG)
message(STATUS "Player Skipping: (${REM_MSG})")
endif()
target_link_libraries(blenderplayer ${BLENDER_SORTED_LIBS})
unset(SEARCHLIB)
unset(SORTLIB)
unset(REMLIB)
unset(REM_MSG)
# else()
# target_link_libraries(blenderplayer ${BLENDER_LINK_LIBS})
# endif()
if(WITH_PLAYER)
add_subdirectory(bad_level_call_stubs)
endif()
setup_liblinks(blenderplayer)