Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
* Code cleanup, removed unneeded code.
* Style cleanup, don't break lines to early
(unless marked as pep8-80 or pep8-120 compliant)
* Keep 1 line after layout declaration empty.
* Use custom names for the keying options enum. The old automated layout dumped
out lengthy names which
didn't work well with the limited UI widths we were using, leading to all the
interesting stuff getting cropped out
* Moved the "array target" options to be in line with the rest of the target
specification stuff. I've ended up flattening that set of options into a single
row, which seems to work quite well.
* Removed label from grouping method enum. There was a perfectly good section
header above, and with narrow UI's, the name of this and the one below ended up
looking the same/confusing.
*Add a new idname to keyingsets, keeping name as label-only (using same string for both made lookup fail when using i18n other than english, as it tried to compare an untranslated static string id against a translated RNA name). Also adding a description string (can be helpful with custom keyingsets, imho).
*Fixed a few other bugs related to that area (namely, you can’t deselect current keyingset from the shift-ctrl-alt-I popup menu, and insert/delete key ops were using a rather strange way to get chosen custom keyingset…).
*Fixed UI code so that it always uses (RNA) enum, and simplified menu-creation code.
---------------------------------------------------------------
This was a test drive to see how painful the merge will be.
Next batches are:
- use desktop option for fullscreen
- multisampling option
- bullet collision mask
- python
- storage (vbo, dl, ...)
- lighting
[lighting still needs review]
[python could use review, although it should be straightforward]
[storage should be tested more I think]
Merged /branches/soc-2011-cucumber:r
36991,37059,37157,37416,37497-37499,37501,37522,39036,40593
36991:
==UI==
* Made some options available in Blender Game that were only available in Blender Render (camera resolution, animation fps)
* Created a panel for the embedded player
* Renamed the FPS option for the standalone player to Refresh Rate
* Moved framing options to display
* Made a button to launch the blender player from within blender (only tested on windows for now)
37059:
==UI==
* Added the option to change the exit key for the BGE. The UI currently just sets a number, and this feature most likely does not work for blenderplayer yet. More work on this to come.
* Removed the physics settings from the scene panel for the BGE.
* Added an Add menu in the logic brick header.
37157:
Making the bake options available in Blender Game
37416:
Making the exit key UI element accept key presses instead of numbers. It still does not work for the Blenderplayer, and it does not limit the input to key presses (other events don't work for exiting)
37497:
Some more work on getting the exit key to work in the Blenderplayer.
Input is now restricted to keyboard events only for the exit key UI.
37498:
Some clean up from the last commit.
The exit key setting affects the Blenderplayer now.
37499:
Cleaning up some duplicate code. Now the reverseTranslateTable for converting blender key codes to ketsji key codes is only defined in BL_BlenderDataConverter.
37501:
Centralizing the exit key methods to the keyboard devices. This should make it easier to get exit key control to the python API.
[37517: committed previously]
37522:
Moved control of the exit key away from the keyboard devices, and moved it to ketsjiengine.
Added setExitKey and getExitKey to the python API
39036:
A couple of the doversions were in the wrong spot. This should fix some issues with the exit key not being set.
[not committed entirely, see below]]
40552: space_logic.py (* fixed an error in space_logic.py *)
40593:
launch blenderplayer from ui not working in OSX fix - by Daniel Stokes and me
########################################################
code left behind (to be included in next commit):
########################################################
{
/* Initialize default values for collision masks */
Object *ob;
for(ob=main->object.first; ob; ob=ob->id.next)
ob->col_group = ob->col_mask = 1;
}
===========================
Commiting camera tracking integration gsoc project into trunk.
This commit includes:
- Bundled version of libmv library (with some changes against official repo,
re-sync with libmv repo a bit later)
- New datatype ID called MovieClip which is optimized to work with movie
clips (both of movie files and image sequences) and doing camera/motion
tracking operations.
- New editor called Clip Editor which is currently used for motion/tracking
stuff only, but which can be easily extended to work with masks too.
This editor supports:
* Loading movie files/image sequences
* Build proxies with different size for loaded movie clip, also supports
building undistorted proxies to increase speed of playback in
undistorted mode.
* Manual lens distortion mode calibration using grid and grease pencil
* Supervised 2D tracking using two different algorithms KLT and SAD.
* Basic algorithm for feature detection
* Camera motion solving. scene orientation
- New constraints to "link" scene objects with solved motions from clip:
* Follow Track (make object follow 2D motion of track with given name
or parent object to reconstructed 3D position of track)
* Camera Solver to make camera moving in the same way as reconstructed camera
This commit NOT includes changes from tomato branch:
- New nodes (they'll be commited as separated patch)
- Automatic image offset guessing for image input node and image editor
(need to do more tests and gather more feedback)
- Code cleanup in libmv-capi. It's not so critical cleanup, just increasing
readability and understanadability of code. Better to make this chaneg when
Keir will finish his current patch.
More details about this project can be found on this page:
http://wiki.blender.org/index.php/User:Nazg-gul/GSoC-2011
Further development of small features would be done in trunk, bigger/experimental
features would first be implemented in tomato branch.
- Make gettext stuff draw-time. so switching between languages
can happens without restart now.
- Added option to translate visible interface (menus, buttons, labels)
and tooltips. Now it's possible to have english UI and localized tooltips.
- Clean-up sources, do not use gettext stuff for things which can be
collected with RNA.
- Fix issues with windows 64bit and ru_RU locale on my desktop
(it was codepage issue).
- Added operator "Get Messages" which generates new text block with
with all strings collected from RNA.
- Changed script for updating blender.pot so now it appends
messages collected from rna to automatically gathered messages.
To update .pot you have to re-generate messages.txt using "Get Messages"
operator and then run update_pot script.
- Clean up old translation stuff which wasn't used and most probably
wouldn't be used.
- Return back "International Fonts" option, so if it's disabled, no
gettext lookups happens on draw.
- Merged read_homefile function back. No need in splitting it.
TODO:
- Custom fonts and font size.
Current font isn't nice at least for russian locale, it's
difficult to read it.
- Put references to messages.txt so gettext can merge translation when
name/description of some property changes.
* The new NAVMESH Modifier did not show any buttons, console printed errors instead!
* Poll of "PHYSICS_PT_game_obstacles" panel caused errors as well, self instead of cls was used as argument.
* Check to show/hide buttons in "WORLD_PT_game_physics_obstacles" panel did not worked due to wrong ENUM identifier ('None' instead if 'NONE')
* Moved "SCENE_PT_navmesh" panel out of properties_scene.py into the properties_game.py where it belongs and renamed it. Also, don't use abreviations in Panel Headers (Navmesh > Navigaion Mesh)
* Code cleanup, removed unnescecary code.
* bpy.types.Panel > Panel
Mixdown functionality.
* Mixdown possible via libsndfile and ffmpeg!
* Fixed some ffmpeg deprecation warnings
* Mixdown UI only shows working Container, Codec and Format combinations!
* Minor bugs and warnings fixed
Implemented basic audio animation.
* AnimatableProperty: Propper cache writing and spline interpolation for reading (the solution for stair steps in audio animation)
* Animatable properties so far are: volume, pitch, panning
* Users note: Changing the pitch of a sound results in wrong seeking, due to the resulting playback length difference.
* Users note: Panning only works for mono sources, values are in the range [-2..2], this basically controls the angle of the sound, 0 is front, -1 left, 1 right and 2 and -2 are back. Typical stereo panning only supports [-1..1].
* Disabled animation of audio related ffmpeg output parameters.
* Scene Audio Panel: 3D Listener settings also for Renderer, new Volume property (animatable!), Update/Bake buttons for animation problems, moved sampling rate and channel count here
ui/ --> startup/bl_ui
op/ --> startup/bl_operators
scripts/startup/ is now the only auto-loading script dir which gives some speedup for blender loading too.
~/.blender/2.56/scripts/startup works for auto-loading scripts too.