The detection login in vpp_papi is significantly more advanced than
the implementation in vpp_papi_provider.
Let's take full advantage of it and ensure consistent behavior.
Change-Id: I786e6d5f4588a0d74e863cce1b0bc1a93fa0e614
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
It came to my attention that Ole added a simple test in:
https://gerrit.fd.io/r/#/c/16381/ and the framework forced him
to launch an instance of VPP to test the formatting of a mac address.
This change allows the test framework to run standard unittest.TestCases
without the need to spawn a VPP instance.
Change-Id: I56651ab27c4c6bf920081a526f168a743d643201
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Specify use of version <2.3.1 released Jan 13, 2019
Change-Id: I23cfb802a677956b77897e0c2b690fac50e18541
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Some dpdk driver does not support rte_eth_dev_rss_hash_conf_get. When that
happens, we display whatever that was in the stack variable for rss_hf which
is confusing.
The fix is to clear rss_hf prior to the call.
Before the fix
--------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:599: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
...
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: ipv4 ipv4-frag ipv4-tcp ipv4-udp ipv4-other
After the fix
-------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:600: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
..
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: none
Change-Id: If8f8327f0012eecc8d23cd7f3f9cc581ca025654
Signed-off-by: Steven <sluong@cisco.com>
Allow to display longer interface names, e.g. VirtualEthernet0/0/0.102
The field length (32) is now the same as for 'show interface'.
Change-Id: I1cb1efd459acb800bfaeeec40b672c8b17cd8c3d
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
When running tests interactively (i.e. not using child process) the
tests are split into small suites each containing tests from a
VPPTestCase, but only the first suite is run. Fix this by creatin a new
suite with all of these small suites in it and running that suite.
Change-Id: I0236f4a980d01765eb993f41d54d98640bb2cd39
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
Given n equals to the maximum number of bytes to copy from src in the API,
or the rough estimate strlen of src, strncpy_s_inline should not copy more
than the number of bytes, computed by strlen(src), to dst if n is greater than
strlen(src). The number of bytes to copy is computed by strnlen(src,n), not n.
Change-Id: I088b46125d9776962750e121f1fbf441952efc2b
Signed-off-by: Steven <sluong@cisco.com>
On ubuntu:
$cd <basedir>/extras/vpp_config
$./scripts/clean.sh
$./scripts/cp-data.sh
$sudo apt-get install python3-pip python3-setuptools
$python3 -m pip install .
$vpp-config
Changes:
* Convert to print() function.
* raw_input changes.
* floor division changes.
* replace vpp-config.py with a setuptools 'vpp-config' entry_point.
* replace netaddr with ipaddress from the standard library and backport.
* .decode() subprocess.Popen's stdout because in python3 they are bytes.
Change-Id: Id98894ee54e0c31a0ba0304134b159caef415705
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
The underlying failure has been fixed and now the test can be
re-enabled.
Change-Id: I75251f6150ef1771dc23ea079799229690cf87d9
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
Remove the needless tests and checks which coverity complains about in
string_test.c
Change-Id: I971650cada77136f06528a65625ef99bd3d7e915
Signed-off-by: Steven <sluong@cisco.com>
Implement API/CLI to clear IP-MAC tables used for ARP-termination
in the specified bridge domain.
The CLI to flush MAC IP tables for a BD is:
set bridge-domain arp entry <bd-id> del-all
The API added is bd_ip_mac_flush.
Change-Id: I34ceb87c0f480c7102f6559312c24081ed485af8
Signed-off-by: John Lo <loj@cisco.com>
PR in openssl community is almost done, and need to change some code in VPP
to align with the openssl interface.
Change-Id: Ic7da53e507b67b53958760d07738dd774b1c526d
Signed-off-by: Ping Yu <ping.yu@intel.com>
It's not OK to crash due to a transient buffer allocation failure.
Return 1 if the requested operation failed, otherwise 0.
Buffer index parameter change to a value-result, so the caller can
differentiate between partial and complete allocation failure: callers
which request an initial allocation (inbound bi = ~0) need to check
the (out) value to decide whether or not to call vlib_buffer_free(...).
Change-Id: I03029d7f2714c17dca4630dfd95a1eb578b68384
Signed-off-by: Dave Barach <dave@barachs.net>
Set TCP checksum to zero, before calculate the TCP checksum.
Change-Id: Id96743334481804b8ebb74afef2f1dbfed29e0cb
Signed-off-by: Andrej Kozemcak <andrej.kozemcak@pantheon.tech>
Moves LDP logic that allows sharing of sessions between multi-process
app workers into a separate VCL shim layer. Also refactors LDP to use
the new layer.
Change-Id: I8198b51eae7d099a8c486e36b29e3a0cb8cee8e9
Signed-off-by: Florin Coras <fcoras@cisco.com>
* Provide context information and return meaningful information.
VPPStatsIOError: Stat segment client connection returned: -2 Stat client socket open but couldn't connect.
Change-Id: I14ea35c58452a2cb7598a7efd136f0c7e1f5743a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
In case of multi process apps, after forking, the parent may decide to
close part or all of the sessions it shares with the child. Because the
sessions have fifos allocated in the parent's segment manager, they must
be moved to the child's segment manager.
Change-Id: I85b4c8c8545005724023ee14043647719cef61dd
Signed-off-by: Florin Coras <fcoras@cisco.com>
The socket API used the socket index handle directly in the sock_delete handler,
resulting in "unknown client id" warnings, and a failure in return for socket clients.
Change-Id: Ia69f740ce0f834cd9b62b7157243a1f42bcad765
Signed-off-by: Ole Troan <ot@cisco.com>
Ater this patch, vcl_test_client and vcl_test_server can work happily with
TLS connection.
"-S" is to indicate TLS connection.
Change-Id: I761894b0b5929912691625f0fe63604725b55978
Signed-off-by: Ping Yu <ping.yu@intel.com>
in the worst case scenario this leads to segfault in a hard-to-debug way.
Change-Id: I165adae0bd2dee26af777a2665c8c124d3a49808
Signed-off-by: Koichiro Den <den@klaipeden.com>
The aarch64 cross-compiler complains about this when building an
optimized image. So we fix it...
Change-Id: Ib2b2089c0534753d7d470311012fa0073ab27d1d
Signed-off-by: Dave Barach <dave@barachs.net>
