The lisp|one show eid-table command's help msg does not display the
available options. This patch fixes that.
show lisp eid-table [local|remote|eid <eid>]
show one eid-table [local|remote|eid <eid>]
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: Id39148db2ff291a7fe859830c1488b69ccd15c05
(cherry picked from commit b418c397dc8c870c6561ea1d7565067333db9df4)
In the vat help msg for one_add_del_l2_arp_entry the IP address option
is misspelled as "ip4 <ip4>" when it should have been "ip <ip4>".
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: Id4058a3ddfdb78b840d7e5a3c330e67b393f5d3b
(cherry picked from commit 8c6ba2957c985a1670e9fca6bc869008e6722364)
The local|remote options to vat's lisp|one_eid_table_dump api command
does not print the eid details instead it produces the following error
messages:
Filter error, unknown filter: 1
Filter error, unknown filter: 2
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: I000c290b400dbf39bd883d57115923167092c9bd
(cherry picked from commit 2237cc8ce1e0eb7222a34bb30bdeb2f3f1df9a81)
It may happen that process node is suspended while it waits for response
from adminq and during that time CLI or API process can call
avf_delete_if. When avf process node resumes, it may happen that device
is not there anymeore.
This patch delegates interface deletion to process node, so CLI/API
process just sends signal instead of deleting device instance itself.
Type: fix
Change-Id: I7f12e12df3071650f6e60ad7eb5af23b7acfe335
Signed-off-by: Damjan Marion <damarion@cisco.com>
(cherry picked from commit 66bb7dd64ee2377103e18b96f1e6bf6405de44b5)
Multiple (> 1) workers leads to handoff node being enabled.
This node pops next feature index to nat.arc_next to make sure
that packet will be pushed to the next feature in the arc.
But node nat44-ed-in2out-output also pops next feature and changes
arc_next. So actual next feature will be skipped in that case.
It leads to all nat44-ed-in2out packets being dropped if we have
multiple workers (handoff node enabled).
To resolve this a new node was added (nat-pre-in2out-output) to fill
arc_next in single worker case and multiple worker case is already
handled by handoff node.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: I9dfba68f00164d2d5ab867224871811bef4411ed
(cherry picked from commit 8fb4d10dc208fb3f284fe79e838343797cb2d813)
With packet trace on, VPP crashes when an arp packet arrives. This patch
fixes the crash and also ensures that the packet trace displays the eid
info.
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: Iaad09a5e2b33e931ab9bd7bc3d4573b5ed5e4bfd
(cherry picked from commit a3960a8b74de5cef51db2c7575f8f2d71a013d0a)
Type: fix
Static analysis identified a possible null pointer dereference. It
was introduced by a recent patch which expanded the DMAC comparison
on inbound packets on a BVI interface to include any secondary MAC
addresses which were added to an interface.
Check if the pointer is null before dereferencing.
Change-Id: Ic2afe2b062eda32977e05bf3f98d82c1fe64620c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
(cherry picked from commit 78681def21b931309a779dfc6a5cbc6ff8b1f814)
- make sure everything is freed on cleanup
- reuse already allocated vectors where possible
Type: fix
Change-Id: Ibd8da1edb37126522dc2d525596521d32dceb73a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 730cec8c0697627cc1fb6a34acd094c77ba07622)
vpp-20.05 on up-to-date Centos 7.8 host with enforcing SELinux fails to
create a host-interface due to two missing SELinux-permissions:
vpp_t self:packet_socket { read write }
This simple patch adds these two permissions. Tested successfully on
local installation.
The steps to reproduce:
$ ip link add vpeer-host type veth peer name vpeer-vpp
vpp# create host-interface name vpeer-vpp
create host-interface: Permission denied (errno 13)
[...]
$ semodule -i vpp-packet-socket.pp
vpp# create host-interface name vpeer-vpp
host-vpeer-vpp
Type: fix
Ticket: VPP-1931
Change-Id: I2b3d92b27b9a9f26aa1c85af2946b15e83e27944
Signed-off-by: Martin Millnert <martin@millnert.se>
(cherry picked from commit 68849350c56b0258d21fc906b09df71a1951f694)
Type: fix
VRRP cannot be used on a BVI interface currently because packets sent
to the virtual mac address of the VR fail the destination mac check in
l2_to_bvi().
Apparently people want to use VRRP on BVI interfaces, so update the
check in l2_to_bvi() so that it will check any secondary mac addresses
which have been added to the ethernet interface if the destination mac
address does not match the primary mac address for the interface.
An equivalent check is already done in ethernet_input_inline() for L3
interfaces which are in promiscuous mode.
Change-Id: I7c5bf624dafda8744fea236c704e8e17e5f53b35
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
also, remove a duplicate 17.01.1 section and wrong page tag for 20.09
Change-Id: Ia2cc77faa75cccab38972ad46517762cb7456466
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Type: feature
This patch updateds cryptodev engine uses new DPDK Cryptodev
API planned to be upstreamed in DPDK 20.11.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Piotr Bronowski <piotrX.bronowski@intel.com>
Change-Id: I8dd1a8ac643f1e952deb787e466b76ea7aa5f420
This patch adds the RSS steering queues set interface, and it's
implementation in DPDK device:
/* Interface to set rss queues of the interface */
typedef clib_error_t *(vnet_interface_rss_queues_set_t)
(struct vnet_main_t * vnm, struct vnet_hw_interface_t * hi,
clib_bitmap_t *bitmap);
This patch also introduces a command line to set the RSS queues:
set interface rss queues <interface> <list <queue-list>>
To display the rss queues, use "show hardware-interfaces"
Below is the example to configure rss queues for interface Gig0:
vpp# set interface rss queues Gig0 list 0,2,4-7
vpp# show hardware-interfaces brief
Name Idx Link Hardware
VirtualFunctionEthernet18/1/0 1 down VirtualFunctionEthernet18/1/0
Link speed: unknown
RSS queues: 0 2 4 5 6 7
local0 0 down local0
Link speed: unknown
vpp#
Users can also configure the rss queues on a dpdk interface in
startup.conf:
dpdk {
dev 0000:18:01.0 {
rss-queues 0,2,5-7
}
}
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I1835595a1c54016a84eabee9fd62ce137935385d
- These were displaying blank, apparently dpdk extended stat strings
must be within the heap so they are identified as vectors by
format_c_identifier even though they are not.
Type: fix
Change-Id: I2b153b100203b9856ce3af6d5ecb2daae410fb5b
Signed-off-by: Christian Hopps <chopps@labn.net>
Was seeing imissed counter become negative. Reuse the RX_ERROR code for all
three error counters to avoid the problem.
Type: fix
Change-Id: I99a69c8816326682745785ecd30e18a131ac2969
Signed-off-by: Christian Hopps <chopps@labn.net>
Type: fix
- Document that ooo dequeues with ooo lookups cannot be done in
combination with in order dequeues.
- Added assert to capture this scenario and de-initialized rbtrees for
cut-through tx fifo
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic40d020b3f0391fcf022ea3c906b86121744144f
Not all ESP crypto algorithms require padding/alignment to be the same
as AES block/IV size. CCM, CTR and GCM all have no padding/alignment
requirements, and the RFCs indicate that no padding (beyond ESPs 4 octet
alignment requirement) should be used unless TFC (traffic flow
confidentiality) has been requested.
CTR: https://tools.ietf.org/html/rfc3686#section-3.2
GCM: https://tools.ietf.org/html/rfc4106#section-3.2
CCM: https://tools.ietf.org/html/rfc4309#section-3.2
- VPP is incorrectly using the IV/AES block size to pad CTR and GCM.
These modes do not require padding (beyond ESPs 4 octet requirement), as
a result packets will have unnecessary padding, which will waste
bandwidth at least and possibly fail certain network configurations that
have finely tuned MTU configurations at worst.
Fix this as well as changing the field names from ".*block_size" to
".*block_align" to better represent their actual (and only) use. Rename
"block_sz" in esp_encrypt to "esp_align" and set it correctly as well.
test: ipsec: Add unit-test to test for RFC correct padding/alignment
test: patch scapy to not incorrectly pad ccm, ctr, gcm modes as well
- Scapy is also incorrectly using the AES block size of 16 to pad CCM,
CTR, and GCM cipher modes. A bug report has been opened with the
and acknowledged with the upstream scapy project as well:
https://github.com/secdev/scapy/issues/2322
Ticket: VPP-1928
Type: fix
Signed-off-by: Christian Hopps <chopps@labn.net>
Change-Id: Iaa4d6a325a2e99fdcb2c375a3395bcfe7947770e
Add the ability to configure the pp2 rx and tx queue sizes in the CLI.
Type: improvement
Signed-off-by: Christian E. Hopps <chopps@chopps.org>
Change-Id: I6a824f92e22fa47fec3d84525cc2d82524ddf639
Type: fix
Calling vlib_get_node_by_name via the VPE api
doesn't work due to hash weirdness. Haven't
gotten around the real cause of this. But this
fixes it.
Change-Id: I89f95dba2bcd9573b8f1f435e063e9dd57f9ca93
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Otherwise, the debug CLI command is unusable in a script because it
will eat (and complain about) subsequent lines in the script. Missing
this guitar lick, etc:
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id328e6f1cc4d2e1672c3946db3865ab5a1a3af8d
Type: refactor
tap, virtio and vhost use virtio/vhost header files from linux
kernel. Different features are supported on different kernel
versions, making it difficult to use those in VPP. This patch
removes virtio/vhost based header dependencies to local header
files.
Change-Id: I064a8adb5cd9753c986b6f224bb075200b3856af
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Type: fix
The ARP/ND feature nodes reply to requests for a VR virtual IP address
when a VR is in the master state. If the VR is in the backup state, the
request is passed to the next node on the feature arc.
This can cause an incorrect response to be sent. If some other feature
(e.g. NAT) causes a virtual IP address to be configured as a "local"
address on the system, a later node on the feature arc may respond to
an ARP/ND request with the real MAC address of the interface.
RFC 5798 says that a router must respond to ARP/ND requests for VR
virtual IP addresses with the VR virtual MAC address. And it says a
router must not respond to ARP/ND requests for VR virtual IP addresses
when the VR is in the backup state. Ensure that ARP/ND requests for
VR virtual IP addresses are dropped when in the backup state rather
than allowing them to continue on the feature arc where another node
may end up responding.
In order to do this, enable/disable the feature nodes when leaving
or entering the init state instead of the master state.
Change-Id: I416f83e125cbf91deb90c3b6eb00ba3207de24ad
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Adjust buffer allocation so it always have odd number of cache lines.
That should result in better distribution of cachelines among cache sets.
Type: improvement
Change-Id: I0d39d4cf01cff36ad6f70a700730823a96448c22
Signed-off-by: Damjan Marion <damarion@cisco.com>
