We register callback for VNET_HW_INTERFACE_LINK_UP_DOWN_FUNCTION and
VNET_SW_INTERFACE_ADMIN_UP_DOWN_FUNCTION to add and remove the slave
interface from the bond interface accordingly. For static bonding without
lacp, one would think that it is good enough to put the slave interface into
the ective slave set as soon as it is configured. Wrong, sometimes the slave
interface is configured to be part of the bonding without ever bringing up the
hardware carrier or setting the admin state to up. In that case, we send
traffic to the "dead" slave interface.
The fix is to make sure both the carrier and admin state are up before we put
the slave into the active set for forwarding traffic.
Change-Id: I93b1c36d5481ca76cc8b87e8ca1b375ca3bd453b
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit e43278f75fe3188551580c7d7991958805756e2f)
The 'example' keyword triggers the creation of very out-of-context
example in the "Examples" top level of documentation. Rename the
keyword in the comment so the comment is still readable, but
does not trigger the doxygen.
Change-Id: Iecbdc236918f9178a034817aa6cea7ab6b2c1654
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Upstream changes not compatable with: https://gerrit.fd.io/r/#/c/16797/
Running tests using custom test runner
Active filters: file=test_syslog.py, class=None, function=None
Adding tests from directory tree /vpp/test
1 out of 914 tests match specified filters
Not running extended tests (some tests will be skipped)
==============================================================================
Syslog Protocol Test Cases
==============================================================================
Syslog Protocol test OK
==============================================================================
TEST RESULTS:
Scheduled tests: 1
Executed tests: 1
Passed tests: 1
==============================================================================
Test run was successful
Change-Id: I42f86ae3e7f062c0343025ba16bc6e8d2c34ed50
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
(cherry picked from commit 5011c67058c3c37d344c5d83ab6046700327b7b4)
This patch adds an entry for the defaultbranch in .gitreview
Change-Id: I3dc45492ec51b10524b0a6d894c7e42c352f0daa
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Remove the source code, replace with reference to the upstreamed
patch.
Change-Id: I6f5430b1e9804530afbec1805353852e1da745d6
Signed-off-by: Dave Barach <dave@barachs.net>
Allocate physmem on the same numa
set link speed
cap vmxnet3 support version to 3 if the device supports higher version
Change-Id: Id47dd83b0da53e623fd6cf3ad010e58158b1ab15
Signed-off-by: Steven <sluong@cisco.com>
The detection login in vpp_papi is significantly more advanced than
the implementation in vpp_papi_provider.
Let's take full advantage of it and ensure consistent behavior.
Change-Id: I786e6d5f4588a0d74e863cce1b0bc1a93fa0e614
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
It came to my attention that Ole added a simple test in:
https://gerrit.fd.io/r/#/c/16381/ and the framework forced him
to launch an instance of VPP to test the formatting of a mac address.
This change allows the test framework to run standard unittest.TestCases
without the need to spawn a VPP instance.
Change-Id: I56651ab27c4c6bf920081a526f168a743d643201
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Specify use of version <2.3.1 released Jan 13, 2019
Change-Id: I23cfb802a677956b77897e0c2b690fac50e18541
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Some dpdk driver does not support rte_eth_dev_rss_hash_conf_get. When that
happens, we display whatever that was in the stack variable for rss_hf which
is confusing.
The fix is to clear rss_hf prior to the call.
Before the fix
--------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:599: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
...
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: ipv4 ipv4-frag ipv4-tcp ipv4-udp ipv4-other
After the fix
-------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:600: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
..
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: none
Change-Id: If8f8327f0012eecc8d23cd7f3f9cc581ca025654
Signed-off-by: Steven <sluong@cisco.com>
Allow to display longer interface names, e.g. VirtualEthernet0/0/0.102
The field length (32) is now the same as for 'show interface'.
Change-Id: I1cb1efd459acb800bfaeeec40b672c8b17cd8c3d
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
When running tests interactively (i.e. not using child process) the
tests are split into small suites each containing tests from a
VPPTestCase, but only the first suite is run. Fix this by creatin a new
suite with all of these small suites in it and running that suite.
Change-Id: I0236f4a980d01765eb993f41d54d98640bb2cd39
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
Given n equals to the maximum number of bytes to copy from src in the API,
or the rough estimate strlen of src, strncpy_s_inline should not copy more
than the number of bytes, computed by strlen(src), to dst if n is greater than
strlen(src). The number of bytes to copy is computed by strnlen(src,n), not n.
Change-Id: I088b46125d9776962750e121f1fbf441952efc2b
Signed-off-by: Steven <sluong@cisco.com>
On ubuntu:
$cd <basedir>/extras/vpp_config
$./scripts/clean.sh
$./scripts/cp-data.sh
$sudo apt-get install python3-pip python3-setuptools
$python3 -m pip install .
$vpp-config
Changes:
* Convert to print() function.
* raw_input changes.
* floor division changes.
* replace vpp-config.py with a setuptools 'vpp-config' entry_point.
* replace netaddr with ipaddress from the standard library and backport.
* .decode() subprocess.Popen's stdout because in python3 they are bytes.
Change-Id: Id98894ee54e0c31a0ba0304134b159caef415705
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
The underlying failure has been fixed and now the test can be
re-enabled.
Change-Id: I75251f6150ef1771dc23ea079799229690cf87d9
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
Remove the needless tests and checks which coverity complains about in
string_test.c
Change-Id: I971650cada77136f06528a65625ef99bd3d7e915
Signed-off-by: Steven <sluong@cisco.com>
Implement API/CLI to clear IP-MAC tables used for ARP-termination
in the specified bridge domain.
The CLI to flush MAC IP tables for a BD is:
set bridge-domain arp entry <bd-id> del-all
The API added is bd_ip_mac_flush.
Change-Id: I34ceb87c0f480c7102f6559312c24081ed485af8
Signed-off-by: John Lo <loj@cisco.com>
