AF_XDP socket will only tx enqueued packets up to a max batch size so
we need to retry until everything has been sent.
Type: fix
Change-Id: Ia487ab63d3e85a478471cd1d679c5fb471804ba3
Signed-off-by: Benoît Ganne <bganne@cisco.com>
The async frames pool may be resized once drained. This will cause 2 problems: original pool pointer is invalidated and pool size changed, both problems will confuse the crypto infra user graph nodes (like IPsec and Wireguard) and crypto engines if they expect the pool pointers always valid and the pool size never changed (for performance reason).
This patch introduces fixed size of the async frames pool. This helps zeroing surprise to the components shown above and avoiding segmentation fault when pool resizing happened. In addition, the crypto engine may take advantage of the feature to sync its own pool/vector with crypto infra.
Type: improvement
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I2a71783b90149fa376848b9c4f84ce8c6c034bef
Otherwise, we will get an error. The program could remain from the previous run.
Type: fix
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: I68e4072bd3b327592013804d67ccab7eb0ed3a0e
SVM_FIFO_WANT_DEQ_NOTIF_IF_FULL should be treated as a
config option that is not frequently changed. Or alternatively, it
should be set together with SVM_FIFO_WANT_DEQ_NOTIF to elicit a one time
tx notification.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie4132c7789ee87227a875ff981eb98f9f4d898a9
- do not allocate port sparse vector when only checking if a port is
already in use
- do not display port that have been unregistered by default
Type: improvement
Change-Id: I6cc94e35806dd8d415cd5d1c1c51e6b066ac26a1
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Linux uses NLM_F_REPLACE in the netlink message to signal a FIB update
The code invariably does a FIB update for IPv4 and a addition for IPv6.
Without this fix, the following:
ip route add 2001:db8::/48 via 2001:db8::1
ip route replace 2001:db8::/48 via 2001:db8::2
ends up as two separate FIB entries in VPP. With the fix, there will be one FIB entry (the second one with nexthop ::2).
Type: fix
Change-Id: I8f98d6ded52ae0c60bfddaa7fc39acbbaa19d34a
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Type: feature
With this change, packets that are larger than a single buffer can fit
will be able to be sent and received over a Wireguard tunnel. Also,
cover this with tests.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ifaf7325676d728580097bc389b51a9be39e44d88
List of changed messages:
- nat44_add_del_static_mapping
- nat44_user_session_dump
- nat44_user_session_details
- nat44_user_session_v2_dump
- nat44_user_session_v2_details
This change is part of VPP API cleanup initiative.
Type: fix
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I317ae93a0e763c3759a8c24fd550e1c97f6f4987
This patch can make crypto dispatch node adaptively switching
between pooling and interrupt mode, and improve vpp overall
performance.
Type: improvement
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: I845ed1d29ba9f3c507ea95a337f6dca7f8d6e24e
In some cases, in the trace dump v2 dump function, we iterate over the
client cache even though this one could be empty.
Type: fix
Change-Id: Ice5cefa25bb93dabe86fe565347cdc32faa674ac
Signed-off-by: Maxime Peim <mpeim@cisco.com>
Type: test
This application creates two memif interfaces which connect
to an external application i.e. VPP.
Usage:
1) Start VPP with following config.
create interface memif id 0 master
create interface memif id 1 master
set int state memif0/0 up
set int state memif0/1 up
create packet-generator interface pg0
set int state pg0 up
create packet-generator interface pg1
set int state pg1 up
set int l2 xconn pg0 memif0/0
set int l2 xconn memif0/0 pg0
set int l2 xconn pg1 memif0/1
set int l2 xconn memif0/1 pg1
packet-generator new { \
name memif \
limit -1 \
node ethernet-input \
size 64-64 \
interface pg0 \
worker 0 \
data { \
IP4: 42:01:0a:00:00:0a -> 02:fe:4b:6e:4d:c1 \
UDP: 172.16.2.2 -> 172.16.0.2 \
UDP: 1234 -> 1234 \
length 30 checksum 0 incrementing 1 \
} \
}
2) Compile and Run the test_app in another terminal.
mkdir -p extras/libmemif/build
cd extras/libmemif/build
cmake ..
make
sudo ./examples/test_app
3) Run in VPP cli
vpp# packet enable
4) Run monitor to see the throughput and pps
vpp# monitor interface memif0/0
Or
vpp# monitor interface memif0/1
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I4b9062fca8ad3020225adb7b1b09e5d66b1a7d48
The plugin creates and manages adjacencies for the physical interface in
each interface pair (they are part of the x-connect feature). When a
link update notification is received from the host system, MAC address
of the corresponding physical interface is updated (as needed) as well
as previously created adjacencies for it (because a new rewrite string
needs to be generated).
Subinterfaces inherit MAC address from the parent interface. When MAC
address of the parent interface changes, it also implies MAC address
change for its subinterfaces. The problem is that this is currently not
considered in the plugin. After MAC address update on the parent
interface, packets sent from subinterfaces might have wrong source MAC
address. For example, IPv6 Neighbor Solicitation messages will be sent
with the wrong (previous) MAC address and neighbor discovery will fail.
With this fix, when the plugin updates adjacencies for a physical
interface, it will also update adjacencies for the subinterfaces with
existing interface pair.
Type: fix
Change-Id: Ia5f617197e33cb79b9b025c02c2c126c31a551ec
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Epoll events might not have been cleared by user so always compute event
flags locally and assign to user provided epoll event.
Type: fix
Signed-off-by: Ping Yu <ping.yu@intel.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3b594a0fd7be345a0e0ad81d1d3636e9354cc15d
When dumping packets from multiple threads using the API, first all
packets from thread 0 are dumped then all ones from thread 1, etc
Until we reach the limit specified by the API call, so we could never
get packets trace from threads with higher ids.
However, the tracedump CLI dump a maximum number of packets from all
threads, which we can expect from the API to do.
We also add a trace_clear_cache API so the client gets an answer when
he only wants to clear its packet cache.
Type: improvement
Change-Id: I0d4df8f6210a298ac3f22cd651eb4d8f445e1034
Signed-off-by: Maxime Peim <mpeim@cisco.com>
Peer fib index and nh fib index should be different when nh-table-id is
specified.
Type: fix
Change-Id: I4c8296adb5aeab1c0022bfc1046e9559331b79b2
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
There was already a basic type defined, but nothing more.
This implements callbacks similar to
ip4_enable_disable_interface_callback_t.
Type: feature
Change-Id: I34fcb146ca68af4eb8cdd244529eb149f884284d
Signed-off-by: Adrian Pistol <vifino@posteo.net>
The order of the parameters when calling the ip_neighbor_probe_dst for
an aged neighbor is wrong and given that it runs on the master thread,
probes for IPv6 neighbors were never sent, leading to a certain neighbor
strike out and death and its removal from the neighbor cache.
Change-Id: Ic021bd0ece05bd2c1c6ab90eab0e2dc27cb10360
Type: fix
Fixes: fd2417b2a42
Signed-off-by: Sergio Gonzalez Monroy <monroy@anapaya.net>
- Make error message more human readable.
Type: improvement
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: Iefc276b3a85ff82b927028a72bb91ed87ebd04ba
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Rename extra_vpp_punt_config to a more generic name extra_vpp_config to
better fit its purpose. It's fit for general use and already used that
way by quic and vcl tests anyway.
Type: refactor
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: Ib0a5789b0dbb3a8c3cae654dea4e32ac5e56dd41
The built stat_segment_data_t is leaked if stat_segment_access_end()
returns false.
Type: fix
Signed-off-by: Duncan Eastoe <duncan@graphiant.com>
Change-Id: I70adabbe7947d3e8a798cdfb3eaa14c683dce9da
load-balance and replicate dpos both store their number of buckets as
u16, which can overflow if too many paths are configured. For
load-balance it can happens quite quickly because of weights
normalization.
Type: fix
Change-Id: I0c78c39fc3d40626dfc58b49e7d99d71f9852b50
Signed-off-by: Benoît Ganne <bganne@cisco.com>
If openssl tls server handshake fails, track the fact that the context
does not have an app session.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5f493059a3610067b59caffbbe441ce9e0868252
On epoll ctl mod, set want deq flag before checking if unhandled events
are needed.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id1491837c7156a66c21e0e45af60b04b1c18601c
Reset deq notification flag even if session is no longer epolled.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4e9aed1849aa2817176f3a54ae41910df5e704a0
