assign flood_class to vnet_sw_interface_t template in subif api handle function

Change-Id: I352f4a4adcf8771c21530657efcaecb532416612
Signed-off-by: Joe Zhou <zhouyoucn@qq.com>
(cherry picked from commit 715f94ed94638ea883f919361bff7a3f46fd1d1b)

.clang-format

@@ -1,48 +1,38 @@
-# Minimal clang-format version is 11
-
-BasedOnStyle: GNU
-UseTab: Always
-SpaceAfterCStyleCast: true
+---
+AlignEscapedNewlinesLeft: true
+AlignTrailingComments: true
+AllowAllParametersOfDeclarationOnNextLine: true
+AllowShortIfStatementsOnASingleLine: false
+AllowShortLoopsOnASingleLine: false
+AllowShortFunctionsOnASingleLine: false
+AlwaysBreakBeforeMultilineStrings: false
+BreakBeforeBinaryOperators: false
+BreakBeforeTernaryOperators: true
+BinPackParameters: true
+BreakBeforeBraces: GNU
+ColumnLimit:     79
+IndentCaseLabels: false
+MaxEmptyLinesToKeep: 1
+PenaltyBreakBeforeFirstCallParameter: 19
+PenaltyBreakComment: 60
+PenaltyBreakString: 1000
+PenaltyBreakFirstLessLess: 120
+PenaltyExcessCharacter: 1000000
+PenaltyReturnTypeOnItsOwnLine: 60
+PointerBindsToType: false
+SpaceBeforeAssignmentOperators: true
+SpaceBeforeParens: Always
+SpacesBeforeTrailingComments: 1
+SpacesInParentheses: false
+SpaceInEmptyParentheses: false
+SpacesInCStyleCastParentheses: false
+SpaceAfterControlStatementKeyword: true
+Cpp11BracedListStyle: true
+Standard:        Cpp11
 SortIncludes: false
-AlignConsecutiveMacros: true
-BreakBeforeTernaryOperators: false
-BreakBeforeBinaryOperators: None
-ContinuationIndentWidth: 2
-
-ForEachMacros:
-  - 'clib_bitmap_foreach'
-  - 'pool_foreach'
-  - 'pool_foreach_index'
-  - 'pool_foreach_pointer'
-  - 'vec_foreach'
-  - 'vec_foreach_backwards'
-  - 'vec_foreach_index'
-  - 'vec_foreach_index_backwards'
-  - 'vec_foreach_pointer'
-  - 'vlib_foreach_rx_tx'
-  - 'foreach_int'
-  - 'foreach_pointer'
-  - 'foreach_vlib_main'
-  - 'foreach_set_bit_index'
-  - 'foreach_vlib_frame_bitmap_set_bit_index'
-  - 'FOREACH_ARRAY_ELT'
-  - 'RTE_ETH_FOREACH_DEV'
-  - 'foreach_vnet_dev_rx_queue_runtime'
-  - 'foreach_vnet_dev_counter'
-  - 'foreach_vnet_dev_port_rx_queue'
-  - 'foreach_vnet_dev_port_tx_queue'
-  - 'foreach_vnet_dev_port'
-  - 'foreach_vnet_dev_args'
-  - 'foreach_vnet_dev_port_args'
-
-StatementMacros:
-  - 'CLIB_MULTIARCH_FN'
-  - 'VLIB_NODE_FN'
-  - 'VNET_DEV_NODE_FN'
-  - 'VNET_DEVICE_CLASS_TX_FN'
-  - '__clib_section'
-  - '__clib_aligned'
-
-WhitespaceSensitiveMacros:
-  - 'WARN_ON'
-  - 'WARN_OFF'
+IndentWidth:     2
+TabWidth:        4
+UseTab:          Never
+IndentFunctionDeclarationAfterType: false
+ContinuationIndentWidth: 4
+...

.clang-tidy

@@ -1,8 +0,0 @@
-Checks: "-*,\
-misc-*,\
-bugprone-*,\
--bugprone-reserved-identifier,\
--performance-*,\
-clang-analyzer-*,\
--clang-analyzer-valist.Uninitialized,\
-"

.git_commit_template.txt

@@ -1,48 +0,0 @@
-# <feature-name>: <subject>
-# |<----  Using a maximum of 50 characters  ---->|
-#
-# Explain why this change is being made
-# |<----   Try to limit each line to a maximum of 72 characters   ---->|
-
-# Ticket: <JIRA #id>
-# Type: <type>
-# Fixes: <offending-git-commit-id>
-# Change-Id: <sha1>
-# Signed-off-by: <email>
-#
-#
-# --- COMMIT END ---
-#
-# Type can be
-#    feature     (new feature)
-#    fix         (bug fix)
-#    refactor    (refactoring production code)
-#    improvement (minor improvements in existing feature)
-#    style       (formatting, missing semi colons, etc; no code change)
-#    docs        (changes to documentation)
-#    test        (adding or refactoring tests; no production code change)
-#    make        (change the build process, or tools, or infrastructure)
-#
-# feature-name: Is the name of the VPP feature, plugin or directory.
-#               Commits across multiple components should be split.
-#               E.g. ip, fib, nat, acl, host, api
-#
-# Fixes: If type is fix refers to the original commit (optional).
-# Ticket: Refers to JIRA ticket if it exists (optional).
-#
-# --------------------
-# Remember to:
-#    Lowercase the subject line.
-#    Use the imperative mood in the subject line.
-#    Not end the subject line with a period.
-#    Separate subject from body with a blank line.
-#    Use the body to explain what and why vs. how.
-#    Use multiple lines with "-" for bullet points in body.
-# --------------------
-# Usage:
-#
-# The template is automatically added to the current repository by
-# make install-dep.
-# (git config commit.template .git_commit_template.txt)
-#
-# --------------------

.github/workflows/close_prs.yml

@@ -1,21 +0,0 @@
----
-name: Close Pull Request
-
-on:
-  pull_request_target:
-    types: [opened]
-
-jobs:
-  run:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: superbrothers/close-pull-request@v3
-      with:
-        # Optional. Post a issue comment just before closing a pull request.
-        comment: "Thank you so much for your interest!  VPP takes patches at https://gerrit.fd.io/
-
-```
-git clone https://gerrit.fd.io/r/vpp
-```
-
-Using [git review](https://www.mediawiki.org/wiki/Gerrit/git-review) to contribute patches is recommended"

.gitignore

@@ -10,33 +10,38 @@
 /build-root/path_setup
 /build-root/deb/debian/vpp-plugins/
 /build-root/deb/.pybuild/
-/build-root/*.buildinfo
 /build-root/*.deb
 /build-root/*.rpm
 /build-root/*.tar.xz
 /build-root/*.changes
 /build-root/rpmbuild/
-/build-root/test-coverage/
-/build-root/test/
+/build-root/test-doc/
+/build-root/test-cov/
+/test/run/
+/test/build/
+/test/coverage/
 /build-config.mk
 /build/external/*.tar.gz
 /build/external/*.tar.xz
-/build/external/vpp-*
-/build/external/dpdk_mlx_default.sh
+/build/external/vpp-*.deb
+/build/external/vpp-*.changes
 /build/external/downloads/
 /path_setup
 /tools/
 # start autotools ignore
 autom4te.cache/
 config/
+Makefile
 Makefile.in
 aclocal.m4
 app.info
 compile
+config.h
 config.log
 config.guess
 config.sub
 config.status
+configure
 configure.scan
 coverage_report
 depcomp
@@ -77,12 +82,9 @@ GTAGS
 /build-root/docs
 /build-root/.doxygen-bootstrap.ok
 /build-root/.doxygen-siphon.dep
-/docs/venv
-
-# language servers
-compile_commands.json
-.clangd
-.cache
+/docs/_build
+/sphinx_venv
+!/docs/Makefile
 
 # indent backup files
 *.BAK
@@ -94,46 +96,12 @@ compile_commands.json
 /src/vpp-api/python/build
 /src/vpp-api/python/dist
 /src/vpp-api/python/vpp_papi.egg-info
-/src/vpp_api/.tox
-/src/vpp_api/.stestr
+
+# Build files in the test directory
+/test/*.ok
 
 # vppctl command list
 /src/scripts/vppctl-cmd-list
 
 # No core files
 **/core
-
-# extra scripts config
-/extras/scripts/.config/
-
-# extras gomemif build files
-/extras/gomemif/bazel*
-
-# vpptop build files
-/extras/vpptop/build/*
-
-# debian packaging
-.pc
-
-# No test log files
-**/test-run-*-*-*
-
-# host stack test framework
-/extras/hs-test/vpp-data
-/extras/hs-test/hs-test
-/extras/hs-test/http_server
-/extras/hs-test/.build.ok
-/extras/hs-test/summary/
-
-# ./configure
-/CMakeFiles
-/bin
-/lib
-/.ninja_deps
-/.ninja_log
-/.cmake
-/CMakeCache.txt
-/build.ninja
-/cmake_install.cmake
-/startup.conf
-/startup.vpp

.gitreview

@@ -2,4 +2,4 @@
 host=gerrit.fd.io
 port=29418
 project=vpp
-defaultbranch=stable/2406
+defaultbranch=stable/1901

INFO.yaml

@@ -4,11 +4,11 @@ project_creation_date: '2015-12-08'
 project_category: ''
 lifecycle_state: 'Incubation'
 project_lead: &vpp_ptl
-    name: 'Damjan Marion'
-    email: 'dmarion@me.com'
-    id: 'dmarion'
-    company: 'cisco'
-    timezone: 'Europe/Zagreb'
+    name: 'Dave Barach'
+    email: 'openvpp@barachs.net'
+    id: 'dbarach'
+    company: ''
+    timezone: ''
 primary_contact: *vpp_ptl
 issue_tracking:
     type: 'jira'
@@ -34,72 +34,73 @@ repositories:
     - 'vpp'
 committers:
     - <<: *vpp_ptl
-    - name: 'Dave Barach'
-      company: 'cisco'
-      email: 'openvpp@barachs.net'
-      id: 'dbarach'
-    - name: 'Florin Coras'
-      company: 'cisco'
-      email: 'florin.coras@gmail.com'
-      id: 'florin.coras'
-    - name: 'Benoit Ganne'
-      company: 'cisco'
-      email: 'bganne@cisco.com'
-      id: 'bganne'
-    - name: 'John Lo'
-      company: 'cisco'
-      email: 'loj@cisco.com'
-      id: 'lojohn'
+    - name: 'Keith Burns'
+      company: 'gmail'
+      email: 'alagalah@gmail.com'
+      id: 'alagalah'
+      timezone: ''
     - name: 'Chris Luke'
       company: 'comcast'
       email: 'chris_luke@comcast.com'
       id: 'chrisluke'
-    - name: 'Neale Ranns'
+      timezone: ''
+    - name: 'Dave Barach'
+      company: 'barachs'
+      email: 'openvpp@barachs.net'
+      id: 'dbarach'
+      timezone: ''
+    - name: 'Damjan Marion'
       company: 'cisco'
-      email: 'nranns@cisco.com'
-      id: 'nranns'
-    - name: 'Matthew Smith'
-      company: 'netgate'
-      email: 'mgsmith@netgate.com'
-      id: 'mgsmith'
-    - name: 'Ole Trøan'
-      company: 'employees'
-      email: 'otroan@employees.org'
-      id: 'otroan'
-    - name: 'Paul Vinciguerra'
-      company: 'vinciconsulting'
-      email: 'pvinci@vinciconsulting.com'
-      id: 'pvinci'
+      email: 'damarion@cisco.com'
+      id: 'dmarion'
+      timezone: ''
     - name: 'Dave Wallace'
       company: 'gmail'
       email: 'dwallacelf@gmail.com'
       id: 'dwallacelf'
+      timezone: ''
+    - name: 'Florin Coras'
+      company: 'gmail'
+      email: 'florin.coras@gmail.com'
+      id: 'florin.coras'
+      timezone: ''
     - name: 'Ed Warnicke'
       company: 'gmail'
       email: 'hagbard@gmail.com'
       id: 'hagbard'
-    - name: 'Andrew Yourtchenko'
+      timezone: ''
+    - name: 'John Lo'
       company: 'cisco'
-      email: 'ayourtch@cisco.com'
-      id: 'ayourtch'
-    - name: 'Fan Zhang'
-      company: 'intel'
-      email: 'roy.fan.zhang@intel.com'
-      id: 'royzhang1980'
-    - name: 'Mohammed HAWARI'
+      email: 'loj@cisco.com'
+      id: 'lojohn'
+      timezone: ''
+    - name: 'Marco Varlese'
+      company: 'suse'
+      email: 'marco.varlese@suse.de'
+      id: 'marco.varlese'
+      timezone: ''
+    - name: 'Neale Ranns'
       company: 'cisco'
-      email: 'momohawari@gmail.com'
-      id: 'momohawari'
+      email: 'nranns@cisco.com'
+      id: 'nranns'
+      timezone: ''
+    - name: 'Ole Trøan'
+      company: 'employees'
+      email: 'otroan@employees.org'
+      id: 'otroan'
+      timezone: ''
+    - name: 'Sergio Gonzalez Monroy'
+      company: 'outlook'
+      email: 'sergio.gonzalez.monroy@outlook.com'
+      id: 'smonroy'
+      timezone: ''
 tsc:
     # yamllint disable rule:line-length
-    approval: 'https://wiki.fd.io/view/TSC/Meeting_Minutes'
+    approval: ''
     changes:
-        - type: 'Promotion'
-          name: 'Damjan Marion'
-          link: 'https://lists.fd.io/g/vpp-dev/message/17521'
-        - type: 'Addition'
-          name: 'Fan Zhang'
-          link: 'https://lists.fd.io/g/vpp-dev/message/19068'
-        - type: 'Approval'
-          name: 'Mohammed HAWARI'
-          link: 'https://ircbot.wl.linuxfoundation.org/meetings/fdio-meeting/2023/fd_io_tsc/fdio-meeting-fd_io_tsc.2023-06-01-15.00.html'
+        - type: 'removal'
+          name: ''
+          link: ''
+        - type: 'promotion'
+          name: ''
+          link: ''

README.md

@@ -19,32 +19,32 @@ For more information on VPP and its features please visit the
 ## Changes
 
 Details of the changes leading up to this version of VPP can be found under
-doc/releasenotes.
+@ref release_notes.
 
 
 ## Directory layout
 
 | Directory name         | Description                                 |
 | ---------------------- | ------------------------------------------- |
-| build-data             | Build metadata                              |
-| build-root             | Build output directory                      |
-| docs                   | Sphinx Documentation                        |
-| dpdk                   | DPDK patches and build infrastructure       |
-| extras/libmemif        | Client library for memif                    |
-| src/examples           | VPP example code                            |
-| src/plugins            | VPP bundled plugins directory               |
-| src/svm                | Shared virtual memory allocation library    |
-| src/tests              | Standalone tests (not part of test harness) |
-| src/vat                | VPP API test program                        |
-| src/vlib               | VPP application library                     |
-| src/vlibapi            | VPP API library                             |
-| src/vlibmemory         | VPP Memory management                       |
-| src/vnet               | VPP networking                              |
-| src/vpp                | VPP application                             |
-| src/vpp-api            | VPP application API bindings                |
-| src/vppinfra           | VPP core library                            |
-| src/vpp/api            | Not-yet-relocated API bindings              |
-| test                   | Unit tests and Python test harness          |
+|      build-data        | Build metadata                              |
+|      build-root        | Build output directory                      |
+|      doxygen           | Documentation generator configuration       |
+|      dpdk              | DPDK patches and build infrastructure       |
+| @ref extras/libmemif   | Client library for memif                    |
+| @ref src/examples      | VPP example code                            |
+| @ref src/plugins       | VPP bundled plugins directory               |
+| @ref src/svm           | Shared virtual memory allocation library    |
+|      src/tests         | Standalone tests (not part of test harness) |
+|      src/vat           | VPP API test program                        |
+| @ref src/vlib          | VPP application library                     |
+| @ref src/vlibapi       | VPP API library                             |
+| @ref src/vlibmemory    | VPP Memory management                       |
+| @ref src/vnet          | VPP networking                              |
+| @ref src/vpp           | VPP application                             |
+| @ref src/vpp-api       | VPP application API bindings                |
+| @ref src/vppinfra      | VPP core library                            |
+| @ref src/vpp/api       | Not-yet-relocated API bindings              |
+|      test              | Unit tests and Python test harness          |
 
 ## Getting started
 
@@ -99,3 +99,8 @@ end-user-oriented information. Also see @subpage dev_doc for developer notes.
 Visit the [VPP wiki](https://wiki.fd.io/view/VPP) for details on more
 advanced building strategies and other development notes.
 
+
+## Test Framework
+
+There is PyDoc generated documentation available for the VPP test framework.
+See @ref test_framework_doc for details.

build-data/packages/external.mk

@@ -29,17 +29,28 @@ ifneq ($(DPDK_MLX5_PMD),)
 DPDK_MAKE_ARGS += DPDK_MLX5_PMD=y
 endif
 
+DPDK_MLX5_PMD_DLOPEN_DEPS=$(strip $($(PLATFORM)_uses_dpdk_mlx5_dlopen_deps))
+ifneq ($(DPDK_MLX5_PMD_DLOPEN_DEPS),)
+DPDK_MAKE_ARGS += DPDK_MLX5_PMD_DLOPEN_DEPS=y
+endif
+
 DPDK_MLX4_PMD=$(strip $($(PLATFORM)_uses_dpdk_mlx4_pmd))
 ifneq ($(DPDK_MLX4_PMD),)
 DPDK_MAKE_ARGS += DPDK_MLX4_PMD=y
 endif
 
-ifeq ("$(V)","1")
-DPDK_MAKE_ARGS += DPDK_VERBOSE=1
+DPDK_PLATFORM_TARGET=$(strip $($(PLATFORM)_dpdk_target))
+ifneq ($(DPDK_PLATFORM_TARGET),)
+DPDK_MAKE_ARGS += DPDK_TARGET=$(DPDK_PLATFORM_TARGET)
+endif
+
+DPDK_MAKE_EXTRA_ARGS = $(strip $($(PLATFORM)_dpdk_make_extra_args))
+ifneq ($(DPDK_MAKE_EXTRA_ARGS),)
+DPDK_MAKE_ARGS += DPDK_MAKE_EXTRA_ARGS="$(DPDK_MAKE_EXTRA_ARGS)"
 endif
 
 external_configure = echo
 
-external_build = echo
+external_make_args = $(DPDK_MAKE_ARGS) -C external ebuild-build
 
-external_install =  $(MAKE) $(DPDK_MAKE_ARGS) -C external ebuild-build ebuild-install
+external_install =  make $(DPDK_MAKE_ARGS) -C external ebuild-install

build-data/packages/japi.mk

@@ -0,0 +1,44 @@
+# Copyright (c) 2017-2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+japi_configure_depend = vpp-install
+japi_source = extras
+japi_configure_subdir = japi
+
+ifneq ($(shell which cmake3),)
+CMAKE?=cmake3
+else
+CMAKE?=cmake
+endif
+
+japi_cmake_args ?=
+japi_cmake_args += -DCMAKE_INSTALL_PREFIX:PATH=$(PACKAGE_INSTALL_DIR)
+japi_cmake_args += -DCMAKE_C_FLAGS="$($(TAG)_TAG_CFLAGS)"
+japi_cmake_args += -DCMAKE_SHARED_LINKER_FLAGS="$($(TAG)_TAG_LDFLAGS)"
+japi_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(PACKAGE_INSTALL_DIR)/../vpp"
+ifeq ("$(V)","1")
+japi_cmake_args += -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON
+endif
+
+#Use devtoolset on centos 7
+ifneq ($(wildcard /opt/rh/devtoolset-7/enable),)
+japi_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-7/root/bin"
+endif
+
+japi_configure = \
+ cd $(PACKAGE_BUILD_DIR) && \
+ $(CMAKE) -G Ninja $(japi_cmake_args) $(call find_source_fn,$(PACKAGE_SOURCE))$(PACKAGE_SUBDIR)
+
+japi_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- $(MAKE_PARALLEL_FLAGS)
+
+japi_install = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- install

build-data/packages/libmemif.mk

@@ -26,6 +26,11 @@ libmemif_cmake_args += -DCMAKE_C_FLAGS="$($(TAG)_TAG_CFLAGS)"
 libmemif_cmake_args += -DCMAKE_SHARED_LINKER_FLAGS="$($(TAG)_TAG_LDFLAGS)"
 libmemif_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(PACKAGE_INSTALL_DIR)/../vpp"
 
+# Use devtoolset on centos 7
+ifneq ($(wildcard /opt/rh/devtoolset-7/enable),)
+libmemif_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-7/root/bin"
+endif
+
 libmemif_configure = \
   cd $(PACKAGE_BUILD_DIR) && \
   $(CMAKE) -G Ninja $(libmemif_cmake_args) $(call find_source_fn,$(PACKAGE_SOURCE))$(PACKAGE_SUBDIR)

build-data/packages/sample-plugin.mk

@@ -30,6 +30,11 @@ sample-plugin_cmake_args += -DCMAKE_C_FLAGS="$($(TAG)_TAG_CFLAGS)"
 sample-plugin_cmake_args += -DCMAKE_SHARED_LINKER_FLAGS="$($(TAG)_TAG_LDFLAGS)"
 sample-plugin_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(PACKAGE_INSTALL_DIR)/../vpp"
 
+# Use devtoolset on centos 7
+ifneq ($(wildcard /opt/rh/devtoolset-7/enable),)
+sample-plugin_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-7/root/bin"
+endif
+
 sample-plugin_configure = \
   cd $(PACKAGE_BUILD_DIR) && \
   $(CMAKE) -G Ninja $(sample-plugin_cmake_args) \

build-data/packages/vom.mk

@@ -28,8 +28,8 @@ vom_cmake_args += -DCMAKE_SHARED_LINKER_FLAGS="$($(TAG)_TAG_LDFLAGS)"
 vom_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(PACKAGE_INSTALL_DIR)/../vpp"
 
 # Use devtoolset on centos 7
-ifneq ($(wildcard /opt/rh/devtoolset-9/enable),)
-vom_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-9/root/bin"
+ifneq ($(wildcard /opt/rh/devtoolset-7/enable),)
+vom_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-7/root/bin"
 endif
 
 vom_configure = \
@@ -39,7 +39,3 @@ vom_configure = \
 vom_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- $(MAKE_PARALLEL_FLAGS)
 
 vom_install = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- install
-
-vom-package-deb: vom-install
-	@$(CMAKE) --build $(PACKAGE_BUILD_DIR)/vom -- package
-	@find $(PACKAGE_BUILD_DIR)/vom -name '*.deb' -exec mv {} $(CURDIR) \;

build-data/packages/vpp.mk

@@ -25,35 +25,22 @@ vpp_cmake_prefix_path := $(subst $() $(),;,$(vpp_cmake_prefix_path))
 
 vpp_cmake_args ?=
 vpp_cmake_args += -DCMAKE_INSTALL_PREFIX:PATH=$(PACKAGE_INSTALL_DIR)
-vpp_cmake_args += -DCMAKE_BUILD_TYPE="$($(TAG)_TAG_BUILD_TYPE)"
+vpp_cmake_args += -DCMAKE_C_FLAGS="$($(TAG)_TAG_CFLAGS)"
+vpp_cmake_args += -DCMAKE_LINKER_FLAGS="$($(TAG)_TAG_LDFLAGS)"
 vpp_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(vpp_cmake_prefix_path)"
 ifeq ("$(V)","1")
 vpp_cmake_args += -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON
 endif
-ifneq ($(VPP_PLATFORM),)
-vpp_cmake_args += -DVPP_PLATFORM="$(VPP_PLATFORM)"
-endif
-ifneq ($(VPP_EXCLUDED_PLUGINS),)
-vpp_cmake_args += -DVPP_EXCLUDED_PLUGINS="$(VPP_EXCLUDED_PLUGINS)"
-endif
-ifneq (${SOURCE_DATE_EPOCH}),)
-vpp_cmake_args += -DVPP_SOURCE_DATE_EPOCH="$(SOURCE_DATE_EPOCH)"
-endif
 
-ifneq ($(VPP_EXTRA_CMAKE_ARGS),)
-vpp_cmake_args += $(VPP_EXTRA_CMAKE_ARGS)
+# Use devtoolset on centos 7
+ifneq ($(wildcard /opt/rh/devtoolset-7/enable),)
+vpp_cmake_args += -DCMAKE_PROGRAM_PATH:PATH="/opt/rh/devtoolset-7/root/bin"
 endif
 
 vpp_configure_depend += external-install
 vpp_configure = \
   cd $(PACKAGE_BUILD_DIR) && \
   $(CMAKE) -G Ninja $(vpp_cmake_args) $(call find_source_fn,$(PACKAGE_SOURCE))
-vpp_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- $(MAKE_PARALLEL_FLAGS)
+#vpp_make_args = --no-print-directory
+vpp_build = $(CMAKE) --build $(PACKAGE_BUILD_DIR)
 vpp_install = $(CMAKE) --build $(PACKAGE_BUILD_DIR) -- install | grep -v 'Set runtime path'
-
-vpp-package-deb: vpp-install
-	@$(CMAKE) --build $(PACKAGE_BUILD_DIR)/vpp -- pkg-deb
-	@find $(PACKAGE_BUILD_DIR) \
-          -maxdepth 2 \
-          \( -name '*.changes' -o -name '*.deb' -o -name '*.buildinfo' \) \
-          -exec mv {} $(CURDIR) \;

build-data/platforms.mk

@@ -15,3 +15,86 @@
 $(foreach d,$(SOURCE_PATH_BUILD_DATA_DIRS),	\
   $(eval -include $(d)/platforms/*.mk))
 
+.PHONY: install-deb
+install-deb: $(patsubst %,%-find-source,$(ROOT_PACKAGES))
+	@$(BUILD_ENV) ;							\
+	set -eu$(BUILD_DEBUG) ;						\
+	$(MAKE) -C $(MU_BUILD_ROOT_DIR)					\
+	    $(patsubst %,%-install,					\
+	      $(ROOT_PACKAGES))	|| exit 1;				\
+									\
+	: generate file manifests ;					\
+	find $(INSTALL_PREFIX)$(ARCH)/*/bin -type f -print		\
+	  | sed -e 's:.*:../& /usr/bin:' | grep -v vppapigen		\
+	    > deb/debian/vpp.install ;					\
+									\
+	: core api definitions ;					\
+	./scripts/find-api-core-contents $(INSTALL_PREFIX)$(ARCH)	\
+	 deb/debian/vpp.install ;					\
+									\
+	: need symbolic links in the lib pkg ; 				\
+	find $(INSTALL_PREFIX)$(ARCH)/*/lib* \( -type f -o  -type l \)  \
+	  -print | egrep -e '*\.so\.*\.*\.*'				\
+	  | grep -v plugins\/						\
+	  | sed -e 's:.*:../& /usr/lib/$(MACHINE)-linux-gnu:'		\
+	    > deb/debian/vpp-lib.install ;				\
+									\
+	: vnet api definitions ;					\
+	./scripts/find-api-lib-contents $(INSTALL_PREFIX)$(ARCH)	\
+	 deb/debian/vpp-lib.install ;					\
+									\
+	: dev package ;							\
+	./scripts/find-dev-contents $(INSTALL_PREFIX)$(ARCH)		\
+	 deb/debian/vpp-dev.install ;					\
+									\
+	: plugins package ;						\
+	./scripts/find-plugins-contents $(INSTALL_PREFIX)$(ARCH)	\
+	 deb/debian/vpp-plugins.install ;				\
+									\
+	: vpp-api-lua package ;						\
+	./scripts/find-vpp-api-lua-contents $(INSTALL_PREFIX)$(ARCH)	\
+	 deb/debian/vpp-api-lua.install ;				\
+									\
+	: vpp-api-java package ;					\
+	./scripts/find-vpp-api-java-contents $(INSTALL_PREFIX)$(ARCH)	\
+	 deb/debian/vpp-api-java.install ;				\
+									\
+	: bin package needs startup config ; 				\
+	echo ../../src/vpp/conf/startup.conf /etc/vpp 			\
+	   >> deb/debian/vpp.install ;					\
+									\
+	: and sysctl config ; 						\
+	echo ../../src/vpp/conf/80-vpp.conf /etc/sysctl.d 		\
+	   >> deb/debian/vpp.install ;					\
+									\
+	: bash completion for vppctl ;					\
+	echo ../../src/scripts/vppctl_completion /etc/bash_completion.d	\
+	   >> deb/debian/vpp.install ;					\
+									\
+	: add log directory ;						\
+	echo /var/log/vpp/						\
+	   >> deb/debian/vpp.dirs ;					\
+									\
+	: dev package needs a couple of additions ;			\
+	echo ../$(INSTALL_PREFIX)$(ARCH)/vpp/bin/vppapigen /usr/bin	\
+	   >> deb/debian/vpp-dev.install ;				\
+	echo ../$(INSTALL_PREFIX)$(ARCH)/vpp/share/vpp/vppapigen_c.py /usr/share/vpp  \
+	   >> deb/debian/vpp-dev.install ;				\
+	echo ../$(INSTALL_PREFIX)$(ARCH)/vpp/share/vpp/vppapigen_json.py /usr/share/vpp \
+	   >> deb/debian/vpp-dev.install ;				\
+	echo ../../extras/japi/java/jvpp/gen/jvpp_gen.py /usr/bin	\
+	   >> deb/debian/vpp-dev.install ;				\
+	for i in $$(ls ../src/vpp-api/java/jvpp/gen/jvppgen/*.py); do	\
+	   echo ../$${i} /usr/lib/python2.7/dist-packages/jvppgen	\
+	       >> deb/debian/vpp-dev.install;				\
+	done;								\
+									\
+	: generate changelog;						\
+	./scripts/generate-deb-changelog 				\
+									\
+	: Go fabricate the actual Debian packages ;			\
+	(								\
+	cd deb &&							\
+	dpkg-buildpackage -us -uc -b					\
+	)
+

build-data/platforms/arm32.mk

@@ -0,0 +1,45 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# vector packet processor
+arm32_arch = native
+arm32_native_tools = vppapigen
+
+arm32_uses_dpdk = yes
+arm32_uses_openssl = no
+
+arm32_root_packages = vpp vlib vlib-api vnet svm vpp-api-test \
+	jvpp gmod
+
+vlib_configure_args_arm32 = --with-pre-data=128
+vnet_configure_args_arm32 = --with-dpdk --without-libssl
+vpp_configure_args_arm32 = --with-dpdk --without-libssl
+
+arm32_dpdk_arch = "armv7a"
+arm32_dpdk_target = "arm-armv7a-linuxapp-gcc"
+arm32_dpdk_make_extra_args = "CPU_CFLAGS='-mfloat-abi=hard' \
+	CONFIG_RTE_EAL_IGB_UIO=y \
+	CONFIG_RTE_LIBRTE_E1000_PMD=y \
+	CONFIG_RTE_MAX_LCORE=4 \
+	CONFIG_RTE_MAX_NUMA_NODES=1"
+
+
+arm32_debug_TAG_CFLAGS = -g -O0 -DCLIB_DEBUG -DFORTIFY_SOURCE=2 -DVLIB_MAX_CPUS=4 -march=armv7-a \
+	-fstack-protector-all -fPIC -Werror
+arm32_debug_TAG_LDFLAGS = -g -O0 -DCLIB_DEBUG -DFORTIFY_SOURCE=2 -DVLIB_MAX_CPUS=4 -march=armv7-a \
+	-fstack-protector-all -fPIC -Werror
+
+arm32_TAG_CFLAGS = -g -O2 -DFORTIFY_SOURCE=2 -DVLIB_MAX_CPUS=4 -march=armv7-a \
+	-fstack-protector -fPIC -Werror
+arm32_TAG_LDFLAGS = -g -O2 -DFORTIFY_SOURCE=2 -DVLIB_MAX_CPUS=4 -march=armv7-a \
+	-fstack-protector -fPIC -Werror

build-data/platforms/dpaa.mk

@@ -0,0 +1,87 @@
+# Copyright 2018 NXP
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Configuration for NXP DPAA1/DPAA2 ARM64 based platform
+MACHINE=$(shell uname -m)
+
+dpaa_mtune = cortex-A72
+dpaa_march = "armv8-a+fp+simd+crc+crypto"
+
+ifeq ($(MACHINE),aarch64)
+dpaa_arch = native
+else
+dpaa_arch = aarch64
+dpaa_os = linux-gnu
+dpaa_target = aarch64-fsl-linux
+dpaa_cross_ldflags = \
+	-Wl,--dynamic-linker=/lib/ld-linux-aarch64.so.1 \
+	-Wl,-rpath=/usr/lib64 \
+	-Wl,-rpath=./.libs \
+	-Wl,-rpath=$(OPENSSL_PATH)/lib
+endif
+
+# Re-write Default configuration, if requied
+ifneq ($(CROSS_PREFIX),)
+# like: aarch64-linux-gnu
+dpaa_target = $(CROSS_PREFIX)
+endif
+
+ifneq ($(CPU_MTUNE),)
+# like: cortex-A53
+dpaa_mtune = $(CPU_MTUNE)
+endif
+
+dpaa_native_tools = vppapigen
+dpaa_root_packages = vpp
+
+# DPDK configuration parameters
+dpaa_uses_dpdk = yes
+
+# Compile with external DPDK only if "DPDK_PATH" variable is defined where we have
+# installed DPDK libraries and headers.
+ifeq ($(PLATFORM),dpaa)
+ifneq ($(DPDK_PATH),)
+#dpaa_dpdk_shared_lib = yes
+dpaa_uses_external_dpdk = yes
+dpaa_dpdk_inc_dir = $(DPDK_PATH)/include/dpdk
+dpaa_dpdk_lib_dir = $(DPDK_PATH)/lib
+else
+# compile using internal DPDK + NXP DPAA2 Driver patch
+dpaa_dpdk_arch = "armv8a"
+dpaa_dpdk_target = "arm64-dpaa-linuxapp-gcc"
+dpaa_dpdk_make_extra_args = "CONFIG_RTE_KNI_KMOD=n"
+endif
+endif
+
+# Disable the unused plugins in order to decrease the VPP pacakage size.
+vpp_configure_args_dpaa = --without-ipv6sr --with-pre-data=128 --without-libnuma
+
+# Other optional vpp_configure_args
+ifneq ($(VPP_CFG_ARGS),)
+vpp_configure_args_dpaa += $(VPP_CFG_ARGS)
+endif
+
+
+dpaa_debug_TAG_CFLAGS = -g -O0 -DCLIB_DEBUG -fPIC -fstack-protector-all -DFORTIFY_SOURCE=2 -mtls-dialect=trad \
+			-march=$(MARCH) -Werror -DCLIB_LOG2_CACHE_LINE_BYTES=6 -I$(OPENSSL_PATH)/include
+dpaa_debug_TAG_LDFLAGS = -g -O0 -DCLIB_DEBUG -fstack-protector-all -DFORTIFY_SOURCE=2 \
+			-march=$(MARCH) -Werror -DCLIB_LOG2_CACHE_LINE_BYTES=6 -L$(OPENSSL_PATH)/lib
+
+
+# Use -rdynamic is for stack tracing, O0 for debugging....default is O2
+# Use -DCLIB_LOG2_CACHE_LINE_BYTES to change cache line size
+dpaa_TAG_CFLAGS = -g -Ofast -fPIC -march=$(MARCH) -mcpu=$(dpaa_mtune) -mtls-dialect=trad \
+		-mtune=$(dpaa_mtune) -funroll-all-loops -DCLIB_LOG2_CACHE_LINE_BYTES=6 -I$(OPENSSL_PATH)/include
+dpaa_TAG_LDFLAGS = -g -Ofast -fPIC -march=$(MARCH) -mcpu=$(dpaa_mtune) \
+		-mtune=$(dpaa_mtune) -funroll-all-loops -DCLIB_LOG2_CACHE_LINE_BYTES=6 -L$(OPENSSL_PATH)/lib
+

build-data/platforms/qppc.mk

@@ -0,0 +1,47 @@
+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Qemu "p-series" powerpc64 
+
+qppc_os = linux-gnu
+
+qppc_cross_ldflags = \
+    -Wl,--dynamic-linker=/lib64/ld64.so.1
+
+qppc_arch = powerpc
+
+qppc_root_packages = vppinfra vlib vlib-api vnet svm \
+	vpp vpp-api-test
+
+vnet_configure_args_qppc = \
+	--without-libssl
+
+vpp_configure_args_qppc = \
+	--without-libssl
+
+vlib_configure_args_qppc = --with-pre-data=128
+
+qppc_march=powerpc64
+
+# native tool chain additions for this platform
+qppc_native_tools = vppapigen
+
+qppc_uses_dpdk = no
+
+qppc_debug_TAG_CFLAGS = -m64 -g -O0 -DCLIB_DEBUG -DCLIB_LOG2_CACHE_LINE_BYTES=6 -maltivec
+qppc_debug_TAG_LDFLAGS = -m64 -g -O0 -DCLIB_DEBUG -DCLIB_LOG2_CACHE_LINE_BYTES=6 -maltivec
+
+qppc_TAG_CFLAGS = -m64 -g -O2 -DCLIB_LOG2_CACHE_LINE_BYTES=6 -maltivec
+qppc_TAG_LDFLAGS = -m64 -g -O2 -DCLIB_LOG2_CACHE_LINE_BYTES=6 -maltivec
+
+

build-data/platforms/vpp.mk

@@ -16,11 +16,30 @@
 MACHINE=$(shell uname -m)
 
 vpp_arch = native
+ifeq ($(TARGET_PLATFORM),thunderx)
+vpp_dpdk_target = arm64-thunderx-linuxapp-gcc
+endif
 
-vpp_root_packages = vpp
+vpp_root_packages = vpp vom japi
+
+vpp_debug_TAG_CFLAGS = -g -O0 -DCLIB_DEBUG -DFORTIFY_SOURCE=2 \
+	-fstack-protector-all -fPIC -Werror
+vpp_debug_TAG_CXXFLAGS = -g -O0 -DCLIB_DEBUG -DFORTIFY_SOURCE=2 \
+	-fstack-protector-all -fPIC -Werror
+vpp_debug_TAG_LDFLAGS = -g -O0 -DCLIB_DEBUG -DFORTIFY_SOURCE=2 \
+	-fstack-protector-all -fPIC -Werror
+
+vpp_TAG_CFLAGS = -g -O2 -DFORTIFY_SOURCE=2 -fstack-protector -fPIC -Werror
+vpp_TAG_CXXFLAGS = -g -O2 -DFORTIFY_SOURCE=2 -fstack-protector -fPIC -Werror
+vpp_TAG_LDFLAGS = -g -O2 -DFORTIFY_SOURCE=2 -fstack-protector -fPIC -Werror -pie -Wl,-z,now
+
+vpp_clang_TAG_CFLAGS = -g -O2 -DFORTIFY_SOURCE=2 -fstack-protector -fPIC -Werror
+vpp_clang_TAG_CXXFLAGS = -g -O2 -DFORTIFY_SOURCE=2 -fstack-protector -fPIC -Werror
+vpp_clang_TAG_LDFLAGS = -g -O2 -DFORTIFY_SOURCE=2 -fstack-protector -fPIC -Werror
+
+vpp_gcov_TAG_CFLAGS = -g -O0 -DCLIB_DEBUG -fPIC -Werror -fprofile-arcs -ftest-coverage
+vpp_gcov_TAG_LDFLAGS = -g -O0 -DCLIB_DEBUG -fPIC -Werror -coverage
+
+vpp_coverity_TAG_CFLAGS = -g -O2 -fPIC -Werror -D__COVERITY__
+vpp_coverity_TAG_LDFLAGS = -g -O2 -fPIC -Werror -D__COVERITY__
 
-vpp_debug_TAG_BUILD_TYPE = debug
-vpp_TAG_BUILD_TYPE = release
-vpp_clang_TAG_BUILD_TYPE = release
-vpp_gcov_TAG_BUILD_TYPE = gcov
-vpp_coverity_TAG_BUILD_TYPE = coverity

build-root/Makefile

@@ -39,7 +39,7 @@
 ######################################################################
 
 # Scripts require non-POSIX parts of bash
-SHELL := $(shell which bash)
+SHELL := /bin/bash
 
 # Where this makefile lives
 MU_BUILD_ROOT_DIR = $(shell pwd)
@@ -190,7 +190,7 @@ ARCH_TARGET_tmp = $(call ifdef_fn,$(ARCH)_target,$(ARCH)-$(OS))
 TARGET = $(call ifdef_fn,$(PLATFORM)_target,$(ARCH_TARGET_tmp))
 TARGET_PREFIX = $(if $(not_native),$(TARGET)-,)
 
-# CPU microarchitecture detection.
+# CPU microarchitecture detection. 
 # Either set <platform>_march in build-data/platforms/<platform>.mk,
 # or detect and use the build-host instruction set
 
@@ -236,18 +236,18 @@ PACKAGE = $*
 # Build/install tags.  This lets you have different CFLAGS/CPPFLAGS/LDFLAGS
 # for e.g. debug versus optimized compiles.  Each tag has its own set of build/install
 # areas.
-TAG =
+TAG = 
 TAG_PREFIX = $(if $(TAG),$(TAG)-)
 
 # yes you need the space
 tag_var_with_added_space_fn = $(if $($(TAG)_TAG_$(1)),$($(TAG)_TAG_$(1)) )
 
 # TAG=debug for debugging
-debug_TAG_CFLAGS = -g -O0 -DCLIB_DEBUG -march=$(MARCH) \
+debug_TAG_CFLAGS = -g -O0 -DCLIB_DEBUG -DFORTIFY_SOURCE=2 -march=$(MARCH) \
 		   -fstack-protector-all -fPIC
-debug_TAG_CXXFLAGS = -g -O0 -DCLIB_DEBUG -march=$(MARCH) \
+debug_TAG_CXXFLAGS = -g -O0 -DCLIB_DEBUG -DFORTIFY_SOURCE=2 -march=$(MARCH) \
 		   -fstack-protector-all -fPIC
-debug_TAG_LDFLAGS = -g -O0 -DCLIB_DEBUG -march=$(MARCH) \
+debug_TAG_LDFLAGS = -g -O0 -DCLIB_DEBUG -DFORTIFY_SOURCE=2 -march=$(MARCH) \
 		   -fstack-protector-all -fPIC
 
 BUILD_PREFIX_package = build-$(TAG_PREFIX)
@@ -309,8 +309,8 @@ endif
 
 # Always prefer our own tools to those installed on system.
 # Note: ccache-bin must be before tool bin.
-#
-# Removed LD_LIBRARY_PATH from BUILD_ENV (drb, 10/31/17):
+# 
+# Removed LD_LIBRARY_PATH from BUILD_ENV (drb, 10/31/17):  
 # export LD_LIBRARY_PATH=$(TOOL_INSTALL_DIR)/lib64:$(TOOL_INSTALL_DIR)/lib
 #   Reported to cause trouble. Only of historical interest, since we no longer
 #   build a full tool chain from source.
@@ -365,7 +365,7 @@ NATIVE_TOOLS_$(IS_LINUX) += $(NATIVE_TOOLS_LINUX)
 CROSS_TOOLS_$(IS_LINUX) += glibc gcc
 
 # must be first for bootstrapping
-NATIVE_TOOLS = findutils $(MAKE)
+NATIVE_TOOLS = findutils make
 
 # basic tools needed for build system
 NATIVE_TOOLS += git automake autoconf libtool texinfo tar
@@ -416,7 +416,7 @@ find_filter += -and -not -path '*/.mu_build_*'
 find_newer_filtered_fn =			\
   (! -f $(1)					\
     || -n $(call find_newer_files_fn,$(1),$(3))	\
-    || -n "`find -L $(2) 			\
+    || -n "`find -H $(2)			\
 	      -type f				\
               -and -newer $(1)			\
 	      -and \( $(4) \)			\
@@ -614,10 +614,10 @@ check_platform =								\
        -a ! -x "`which 2> /dev/null $${target_gcc}`" ] ; then			\
     $(call build_msg_fn,							\
 	   No cross-compiler found for platform $(PLATFORM) target $(TARGET);	\
-	     try $(MAKE) PLATFORM=$(PLATFORM) install-tools) ;			\
+	     try make PLATFORM=$(PLATFORM) install-tools) ;			\
     exit 1 ;									\
   fi
-
+    
 configure_check_timestamp =						\
   @$(BUILD_ENV) ;							\
   $(check_platform) ;							\
@@ -625,10 +625,6 @@ configure_check_timestamp =						\
   mkdir -p $(PACKAGE_INSTALL_DIR) ;					\
   conf="$(TIMESTAMP_DIR)/$(CONFIGURE_TIMESTAMP)" ;			\
   dirs="$(call package_mk_fn,$(PACKAGE))				\
-	$(SOURCE_PATH_BUILD_DATA_DIRS)/platforms/$(PLATFORM).mk		\
-	$(wildcard $(call find_source_fn,$(PACKAGE_SOURCE))/cmake)	\
-	$(shell find $(call find_source_fn,$(PACKAGE_SOURCE))		\
-			-name CMakeLists.txt)				\
 	$(wildcard $(call find_source_fn,				\
 	             $(PACKAGE_SOURCE))$(PACKAGE_SUBDIR)/configure)	\
        $(MU_BUILD_ROOT_DIR)/config.site" ;				\
@@ -650,20 +646,15 @@ configure_check_timestamp =						\
 # /proc/cpuinfo does not exist on platforms without a /proc and on some
 # platforms, notably inside containers, it has no content. In those cases
 # we assume there's 1 processor; we use 2*ncpu for the -j option.
-#
-# On FreeBSD we can call nproc to get the number of processors.
-#
 # NB: GNU Make 4.2 will let us use '$(file </proc/cpuinfo)' to both test
 # for file presence and content; for now this will have to do.
 ifndef MAKE_PARALLEL_JOBS
-ifeq ($(shell uname), FreeBSD)
-MAKE_PARALLEL_JOBS = $(shell nproc)
-else
-MAKE_PARALLEL_JOBS = $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo), \
+MAKE_PARALLEL_JOBS = -j $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo), \
 	$(shell grep -c ^processor /proc/cpuinfo), 2)
-endif	# FreeBSD
+else
+MAKE_PARALLEL_JOBS := -j $(MAKE_PARALLEL_JOBS)
 endif
-MAKE_PARALLEL_FLAGS ?= $(if $($(PACKAGE)_make_parallel_fails),,-j $(MAKE_PARALLEL_JOBS))
+MAKE_PARALLEL_FLAGS ?= $(if $($(PACKAGE)_make_parallel_fails),,$(MAKE_PARALLEL_JOBS))
 
 # Make command shorthand for packages & tools.
 PACKAGE_MAKE =					\
@@ -772,7 +763,7 @@ find_source_for_package =									\
       exit 1;											\
     fi ;											\
     $(call build_msg_fn,Fix file dates in $${g}/$(PACKAGE_SOURCE)) ;					\
-    : the timestamp-adjustment script used to be invoked at this point ;			\
+    (cd $${s} ; $(MU_BUILD_ROOT_DIR)/autowank --touch) ;					\
   fi ;												\
   s=`cd $${s} && pwd` ;										\
   $(call build_msg_fn,Source found in $${s})
@@ -807,10 +798,10 @@ pull-all:
 	$(call build_msg_fn,Git pull build tools) ;				\
 	$(call tool_make_target_fn,pull-all) ;					\
 	$(call build_msg_fn,Git pull packages for platform $(PLATFORM)) ;	\
-	$(MAKE) PLATFORM=$(PLATFORM) $(patsubst %,%-pull-all,$(ROOT_PACKAGES))
+	make PLATFORM=$(PLATFORM) $(patsubst %,%-pull-all,$(ROOT_PACKAGES))
 
 .PHONY: %-diff
-%-diff:
+%-diff:									
 	@$(BUILD_ENV) ;							\
 	d=$(call find_source_fn,$(PACKAGE_SOURCE)) ;			\
 	$(call build_msg_fn,Git diff $(PACKAGE)) ;			\
@@ -819,12 +810,12 @@ pull-all:
         else								\
 	 $(call build_msg_fn, $(PACKAGE) not a git directory) ;		\
 	fi
-
+            
 
 
 # generate diffs for everything in source path
 .PHONY: diff-all
-diff-all:
+diff-all:								
 	@$(BUILD_ENV) ;							\
 	$(call build_msg_fn,Generate diffs) ;				\
 	for r in $(ABSOLUTE_SOURCE_PATH); do				\
@@ -922,7 +913,7 @@ basic_system_image_install =				\
   mkdir -p bin lib mnt proc root sbin sys tmp etc ;	\
   mkdir -p usr usr/{bin,sbin} usr/lib ;			\
   mkdir -p var var/{lib,lock,log,run,tmp} ;		\
-  mkdir -p var/lock/subsys var/lib/urandom
+  mkdir -p var/lock/subsys var/lib/urandom 
 
 .PHONY: basic_system-image_install
 basic_system-image_install: # linuxrc-install
@@ -932,7 +923,7 @@ basic_system-image_install: # linuxrc-install
 ROOT_PACKAGES = $(if $($(PLATFORM)_root_packages),$($(PLATFORM)_root_packages),$(default_root_packages))
 
 .PHONY: install-packages
-install-packages: $(patsubst %,%-find-source,$(ROOT_PACKAGES))
+install-packages: $(patsubst %,%-find-source,$(ROOT_PACKAGES))	
 	@$(BUILD_ENV) ;							        \
 	set -eu$(BUILD_DEBUG) ;							\
 	d=$(MU_BUILD_ROOT_DIR)/packages-$(PLATFORM) ;				\
@@ -954,7 +945,7 @@ install-packages: $(patsubst %,%-find-source,$(ROOT_PACKAGES))
 		    >& /dev/null ;						\
 	else									\
 	    $(call build_msg_fn, NOT stripping symbols) ;			\
-	fi
+	fi 
 
 # readonly root squashfs image
 # Note: $(call build_msg_fn) does not seem to work inside of fakeroot so we use echo
@@ -969,13 +960,13 @@ $(PLATFORM_IMAGE_DIR)/ro.img ro-image: $(patsubst %,%-find-source,$(ROOT_PACKAGE
 	chmod 0755 $${tmp_dir} ;					\
 	cd $${tmp_dir} ;						\
 	trap "rm -rf $${tmp_dir}" err ;					\
-	fakeroot $(SHELL) -c "{					\
+	fakeroot /bin/bash -c "{					\
 	  set -eu$(BUILD_DEBUG) ;					\
 	  $(MAKE) -C $(MU_BUILD_ROOT_DIR) IMAGE_INSTALL_DIR=$${tmp_dir}	\
 	    $(patsubst %,%-image_install,				\
 	      basic_system						\
 	      $(ROOT_PACKAGES)) ;					\
-	  : $(MAKE) dev directory ;					\
+	  : make dev directory ;					\
 	  $(linuxrc_makedev) ;						\
 	  echo @@@@ Relocating ELF executables to run in / @@@@ ;	\
 	  scripts/set-rpath /$(arch_lib_dir):/lib ;			\
@@ -1061,7 +1052,7 @@ rw-image: rw-image-check-type ro-image
 	chmod 0755 $${tmp_dir} ;				\
 	cd $${tmp_dir} ;					\
 	trap "rm -rf $${tmp_dir}" err ;				\
-	fakeroot $(SHELL) -c "{				\
+	fakeroot /bin/bash -c "{				\
 	  set -eu$(BUILD_DEBUG) ;				\
 	  $(linuxrc_makedev) ;					\
 	  $(call rw_image_embed_ro_image_fn,$${ro_image}) ;	\
@@ -1094,7 +1085,7 @@ ccache-install:
 	$(MAKE) -C $(MU_BUILD_ROOT_DIR)	ccache-build
 	mkdir -p $(TOOL_INSTALL_DIR)/ccache-bin
 	ln -sf $(MU_BUILD_ROOT_DIR)/build-tool-native/ccache/ccache \
-		$(TOOL_INSTALL_DIR)/ccache-bin/$(TARGET_PREFIX)gcc
+		$(TOOL_INSTALL_DIR)/ccache-bin/$(TARGET_PREFIX)gcc 
 
 TOOL_MAKE = $(MAKE) is_build_tool=yes
 
@@ -1158,4 +1149,7 @@ distclean:
 	rm -rf $(MU_BUILD_ROOT_DIR)/*.deb
 	rm -rf $(MU_BUILD_ROOT_DIR)/*.rpm
 	rm -rf $(MU_BUILD_ROOT_DIR)/*.changes
-	rm -rf $(MU_BUILD_ROOT_DIR)/*.buildinfo
+	rm -rf $(MU_BUILD_ROOT_DIR)/python
+	if [ -e /usr/bin/dh ];then (cd $(MU_BUILD_ROOT_DIR)/deb/;debian/rules clean); fi
+	rm -f $(MU_BUILD_ROOT_DIR)/deb/debian/*.install
+	rm -f $(MU_BUILD_ROOT_DIR)/deb/debian/changelog

build-root/config.site

@@ -0,0 +1,119 @@
+# Copyright (c) 2015 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+######################################################################
+# glibc
+######################################################################
+
+# glibc needs this for cross compiling 
+libc_cv_forced_unwind=yes
+libc_cv_c_cleanup=yes
+libc_cv_ssp=no
+# fixes gentoo build; not sure why?
+libc_cv_uname_release=""
+libc_cv_uname_version=""
+ac_cv_header_cpuid_h=yes
+######################################################################
+# bash
+######################################################################
+
+# Bash configure.in uses this to work around an autoconf 2.53 bug
+ac_cv_func_setvbuf_reversed=no
+ac_cv_rl_version=5.1
+bash_cv_termcap_lib=libncurses
+
+# These mostly come from debian bash-2.05b changes
+# They are needed to make a functioning bash.  Without these
+# settings gdbserver exiting would cause the invoking bash to
+# exit also.
+bash_cv_have_mbstate_t=yes
+bash_cv_dup2_broken=no
+bash_cv_pgrp_pipe=no
+bash_cv_sys_siglist=yes
+bash_cv_under_sys_siglist=yes
+bash_cv_opendir_not_robust=no
+bash_cv_printf_declared=yes
+bash_cv_ulimit_maxfds=yes
+bash_cv_getenv_redef=yes
+bash_cv_getcwd_calls_popen=no
+bash_cv_func_strcoll_broken=no
+bash_cv_must_reinstall_sighandlers=no
+bash_cv_type_quad_t=yes
+bash_cv_func_sigsetjmp=present
+bash_cv_job_control_missing=present
+bash_cv_sys_named_pipes=present
+bash_cv_type_rlimit=long
+bash_cv_printf_a_format=yes
+bash_cv_unusable_rtsigs=no
+
+######################################################################
+# Apache
+######################################################################
+ac_cv_func_setpgrp_void=yes
+apr_cv_process_shared_works=yes
+apr_cv_tcp_nodelay_with_cork=yes
+ap_void_ptr_lt_long=no
+
+case ${host_cpu} in
+x86_64 | alpha)
+  ac_cv_sizeof_ssize_t=8
+  ac_cv_sizeof_size_t=8
+  ac_cv_sizeof_pid_t=4
+  ;;
+*)
+  ac_cv_sizeof_ssize_t=4
+  ac_cv_sizeof_size_t=4
+  ac_cv_sizeof_pid_t=4
+  ;;
+esac
+
+######################################################################
+# gdb
+######################################################################
+gdb_cv_func_ptrace_args=int,int,long,long
+
+######################################################################
+# dpkg
+######################################################################
+dpkg_cv_va_copy=yes
+
+######################################################################
+# coreutils
+######################################################################
+ac_cv_search_clock_gettime=no
+gl_cv_fs_space=yes
+
+######################################################################
+# valgrind
+######################################################################
+ac_cv_file__proc_self_fd=yes
+ac_cv_file__proc_self_exe=yes
+ac_cv_file__proc_self_maps=yes
+
+######################################################################
+# tcpdump
+######################################################################
+ac_cv_linux_vers=2
+ac_cv_func_pcap_findalldevs=no
+
+######################################################################
+# flex
+######################################################################
+ac_cv_func_malloc_0_nonnull=yes
+ac_cv_func_realloc_0_nonnull=yes
+
+######################################################################
+# tar
+######################################################################
+tar_gl_cv_func_mknod_works=yes

build-root/deb/debian/.gitignore

@@ -0,0 +1,14 @@
+changelog
+files
+*debhelper*
+*.substvars
+*.install
+*.dirs
+vpp/
+vpp-dev/
+vpp-lib/
+vpp-dbg/
+vppctl/
+vpp-api-lua/
+vpp-api-java/
+vpp-api-python/

build-root/deb/debian/README.vpp

@@ -0,0 +1,56 @@
+Building DEB packages
+=====================
+
+REQUIREMENTS:
+    You will need a working Internet connection to execute the build, because
+    the build procedure for the included "dpdk" project attempts to contact the
+    Internet host "dpdk.org".
+
+There are three main parts to the process:
+    a) Stage the source tree so that dpkg-source will recognize its organization
+        and create a valid DSC source package for you;
+    b) Ensure that the tools required for building DEB packages are installed;
+        and
+    c) Launch the build.
+
+1) Create, or have on hand, a local clone of the git repository, with no
+untracked files or local modifications pending, up-to-date with the branch or
+commit reference from which you wish to construct the source release.
+
+The branch and repository origins will differ based on local conditions.
+
+Example:
+$ git clone -b master ssh://git@example.com:7999/~username/open-vpp
+
+("-b master" can be omitted since master is the default branch)
+
+2) Rename the checkout with a version number embedded in its name as is
+conventional for code releases.  Again, your version number may vary.
+
+Example:
+$ mv open-vpp open-vpp-0.0.0
+
+3) Ensure that the dpkg-buildpackage program is installed.
+
+E.g.,
+
+# apt-get install dpkg-dev
+
+4) From the PARENT directory of the debian/ directory, run:
+
+$ cd open-vpp-0.0.0
+$ dpkg-buildpackage -I .git -us -uc
+
+(The -us and -uc flags omit GPG signatures from the .dsc and .changes files,
+respectively.  You can add them later, or if you are preparing a signed release
+and have the signing key on hand, leave off the flags.)
+
+5) Get rid of the source directory; you now either have a source package with
+which you can re-create it at any time, or there were problems with the build,
+and you should go back to your git checkout to fix them.
+
+$ rm -r open-vpp-0.0.0
+
+END
+
+vim:set ai et sw=4 ts=4 tw=80:

build-root/deb/debian/compat

@@ -0,0 +1 @@
+9

build-root/deb/debian/control

@@ -0,0 +1,67 @@
+Source: vpp
+Section: net
+Priority: extra
+Maintainer: Cisco OpenVPP Packaging Team <bogus.address@cisco.com>
+Build-Depends: debhelper (>= 9), dh-systemd, dh-python, chrpath, python-all
+Standards-Version: 3.9.4
+
+Package: vpp
+Architecture: any
+Depends: vpp-lib (= ${source:Version}), ${shlibs:Depends}, ${misc:Depends}, ${python:Depends}
+Description: Vector Packet Processing--executables
+ This package provides VPP executables: vpp, vpp_api_test, vpp_json_test
+ vpp - the vector packet engine
+ vpp_api_test - vector packet engine API test tool
+ vpp_json_test - vector packet engine JSON test tool
+
+Package: vpp-dbg
+Architecture: any
+Depends: ${misc:Depends}
+Description: Vector Packet Processing--debug symbols
+
+Package: vpp-dev
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, ${python:Depends}
+Description: Vector Packet Processing--development support
+ This package contains development support files for the VPP libraries
+ .
+
+Package: vpp-lib
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Vector Packet Processing--runtime libraries
+ This package contains the VPP shared libraries, including:
+ .
+ vppinfra - foundation library supporting vectors, hashes, bitmaps, pools, and string formatting.
+ svm - vm library
+ vlib - vector processing library
+ vlib-api - binary API library
+ vnet -  network stack library
+
+Package: vpp-plugins
+Architecture: any
+Depends: vpp (= ${source:Version}), ${shlibs:Depends}, ${misc:Depends}
+Description: Vector Packet Processing--runtime plugins
+ This package contains VPP plugins
+ .
+
+Package: vpp-api-lua
+Architecture: any
+Depends: ${misc:Depends}, vpp (= ${source:Version})
+Description: VPP LUA API bindings
+  This package contains VPP lua api bindings
+  .
+
+Package: vpp-api-java
+Architecture: any
+Depends: ${misc:Depends}, vpp (= ${source:Version})
+Description: VPP Java API bindings
+  This package contains VPP java api bindings
+  .
+
+Package: vpp-api-python
+Architecture: any
+Depends: ${python:Depends}, ${misc:Depends}, vpp (= ${source:Version})
+Description: VPP Python API bindings
+  This package contains VPP python api bindings
+  .