misc: 21.10 Release Notes

Change-Id: I7aa0708d54156166f2dcdc8359e2450a3c4bf9af
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>

.clang-format

@@ -1,4 +1,4 @@
-# Minimal clang-format version is 11
+# Minimal clang-format version is 8
 
 BasedOnStyle: GNU
 UseTab: Always
@@ -13,36 +13,16 @@ ForEachMacros:
   - 'clib_bitmap_foreach'
   - 'pool_foreach'
   - 'pool_foreach_index'
-  - 'pool_foreach_pointer'
   - 'vec_foreach'
   - 'vec_foreach_backwards'
   - 'vec_foreach_index'
   - 'vec_foreach_index_backwards'
-  - 'vec_foreach_pointer'
   - 'vlib_foreach_rx_tx'
-  - 'foreach_int'
-  - 'foreach_pointer'
   - 'foreach_vlib_main'
-  - 'foreach_set_bit_index'
-  - 'foreach_vlib_frame_bitmap_set_bit_index'
-  - 'FOREACH_ARRAY_ELT'
-  - 'RTE_ETH_FOREACH_DEV'
-  - 'foreach_vnet_dev_rx_queue_runtime'
-  - 'foreach_vnet_dev_counter'
-  - 'foreach_vnet_dev_port_rx_queue'
-  - 'foreach_vnet_dev_port_tx_queue'
-  - 'foreach_vnet_dev_port'
-  - 'foreach_vnet_dev_args'
-  - 'foreach_vnet_dev_port_args'
 
 StatementMacros:
   - 'CLIB_MULTIARCH_FN'
   - 'VLIB_NODE_FN'
-  - 'VNET_DEV_NODE_FN'
   - 'VNET_DEVICE_CLASS_TX_FN'
   - '__clib_section'
   - '__clib_aligned'
-
-WhitespaceSensitiveMacros:
-  - 'WARN_ON'
-  - 'WARN_OFF'

.github/workflows/close_prs.yml

@@ -1,21 +0,0 @@
----
-name: Close Pull Request
-
-on:
-  pull_request_target:
-    types: [opened]
-
-jobs:
-  run:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: superbrothers/close-pull-request@v3
-      with:
-        # Optional. Post a issue comment just before closing a pull request.
-        comment: "Thank you so much for your interest!  VPP takes patches at https://gerrit.fd.io/
-
-```
-git clone https://gerrit.fd.io/r/vpp
-```
-
-Using [git review](https://www.mediawiki.org/wiki/Gerrit/git-review) to contribute patches is recommended"

.gitignore

@@ -10,19 +10,24 @@
 /build-root/path_setup
 /build-root/deb/debian/vpp-plugins/
 /build-root/deb/.pybuild/
-/build-root/*.buildinfo
 /build-root/*.deb
 /build-root/*.rpm
 /build-root/*.tar.xz
 /build-root/*.changes
 /build-root/rpmbuild/
-/build-root/test-coverage/
-/build-root/test/
+/build-root/test-doc/
+/build-root/test-cov/
+/test/run/
+/test/build/
+/test/coverage/
+/test/venv/
+/test/vapi_test/
+/test/doc/build/
 /build-config.mk
 /build/external/*.tar.gz
 /build/external/*.tar.xz
-/build/external/vpp-*
-/build/external/dpdk_mlx_default.sh
+/build/external/vpp-*.deb
+/build/external/vpp-*.changes
 /build/external/downloads/
 /path_setup
 /tools/
@@ -77,12 +82,14 @@ GTAGS
 /build-root/docs
 /build-root/.doxygen-bootstrap.ok
 /build-root/.doxygen-siphon.dep
-/docs/venv
+/docs/_build
+/docs/dynamic_includes
+/sphinx_venv
+!/docs/Makefile
 
 # language servers
 compile_commands.json
 .clangd
-.cache
 
 # indent backup files
 *.BAK
@@ -114,26 +121,3 @@ compile_commands.json
 
 # debian packaging
 .pc
-
-# No test log files
-**/test-run-*-*-*
-
-# host stack test framework
-/extras/hs-test/vpp-data
-/extras/hs-test/hs-test
-/extras/hs-test/http_server
-/extras/hs-test/.build.ok
-/extras/hs-test/summary/
-
-# ./configure
-/CMakeFiles
-/bin
-/lib
-/.ninja_deps
-/.ninja_log
-/.cmake
-/CMakeCache.txt
-/build.ninja
-/cmake_install.cmake
-/startup.conf
-/startup.vpp

.gitreview

@@ -2,4 +2,4 @@
 host=gerrit.fd.io
 port=29418
 project=vpp
-defaultbranch=stable/2406
+defaultbranch=stable/2110

INFO.yaml

@@ -86,10 +86,6 @@ committers:
       company: 'intel'
       email: 'roy.fan.zhang@intel.com'
       id: 'royzhang1980'
-    - name: 'Mohammed HAWARI'
-      company: 'cisco'
-      email: 'momohawari@gmail.com'
-      id: 'momohawari'
 tsc:
     # yamllint disable rule:line-length
     approval: 'https://wiki.fd.io/view/TSC/Meeting_Minutes'
@@ -100,6 +96,3 @@ tsc:
         - type: 'Addition'
           name: 'Fan Zhang'
           link: 'https://lists.fd.io/g/vpp-dev/message/19068'
-        - type: 'Approval'
-          name: 'Mohammed HAWARI'
-          link: 'https://ircbot.wl.linuxfoundation.org/meetings/fdio-meeting/2023/fd_io_tsc/fdio-meeting-fd_io_tsc.2023-06-01-15.00.html'

README.md

@@ -19,32 +19,32 @@ For more information on VPP and its features please visit the
 ## Changes
 
 Details of the changes leading up to this version of VPP can be found under
-doc/releasenotes.
+@ref release_notes.
 
 
 ## Directory layout
 
 | Directory name         | Description                                 |
 | ---------------------- | ------------------------------------------- |
-| build-data             | Build metadata                              |
-| build-root             | Build output directory                      |
-| docs                   | Sphinx Documentation                        |
-| dpdk                   | DPDK patches and build infrastructure       |
-| extras/libmemif        | Client library for memif                    |
-| src/examples           | VPP example code                            |
-| src/plugins            | VPP bundled plugins directory               |
-| src/svm                | Shared virtual memory allocation library    |
-| src/tests              | Standalone tests (not part of test harness) |
-| src/vat                | VPP API test program                        |
-| src/vlib               | VPP application library                     |
-| src/vlibapi            | VPP API library                             |
-| src/vlibmemory         | VPP Memory management                       |
-| src/vnet               | VPP networking                              |
-| src/vpp                | VPP application                             |
-| src/vpp-api            | VPP application API bindings                |
-| src/vppinfra           | VPP core library                            |
-| src/vpp/api            | Not-yet-relocated API bindings              |
-| test                   | Unit tests and Python test harness          |
+|      build-data        | Build metadata                              |
+|      build-root        | Build output directory                      |
+|      doxygen           | Documentation generator configuration       |
+|      dpdk              | DPDK patches and build infrastructure       |
+| @ref extras/libmemif   | Client library for memif                    |
+| @ref src/examples      | VPP example code                            |
+| @ref src/plugins       | VPP bundled plugins directory               |
+| @ref src/svm           | Shared virtual memory allocation library    |
+|      src/tests         | Standalone tests (not part of test harness) |
+|      src/vat           | VPP API test program                        |
+| @ref src/vlib          | VPP application library                     |
+| @ref src/vlibapi       | VPP API library                             |
+| @ref src/vlibmemory    | VPP Memory management                       |
+| @ref src/vnet          | VPP networking                              |
+| @ref src/vpp           | VPP application                             |
+| @ref src/vpp-api       | VPP application API bindings                |
+| @ref src/vppinfra      | VPP core library                            |
+| @ref src/vpp/api       | Not-yet-relocated API bindings              |
+|      test              | Unit tests and Python test harness          |
 
 ## Getting started
 
@@ -99,3 +99,8 @@ end-user-oriented information. Also see @subpage dev_doc for developer notes.
 Visit the [VPP wiki](https://wiki.fd.io/view/VPP) for details on more
 advanced building strategies and other development notes.
 
+
+## Test Framework
+
+There is PyDoc generated documentation available for the VPP test framework.
+See @ref test_framework_doc for details.

build-data/packages/external.mk

@@ -42,4 +42,4 @@ external_configure = echo
 
 external_build = echo
 
-external_install =  $(MAKE) $(DPDK_MAKE_ARGS) -C external ebuild-build ebuild-install
+external_install =  make $(DPDK_MAKE_ARGS) -C external ebuild-build ebuild-install

build-data/packages/vpp.mk

@@ -30,15 +30,6 @@ vpp_cmake_args += -DCMAKE_PREFIX_PATH:PATH="$(vpp_cmake_prefix_path)"
 ifeq ("$(V)","1")
 vpp_cmake_args += -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON
 endif
-ifneq ($(VPP_PLATFORM),)
-vpp_cmake_args += -DVPP_PLATFORM="$(VPP_PLATFORM)"
-endif
-ifneq ($(VPP_EXCLUDED_PLUGINS),)
-vpp_cmake_args += -DVPP_EXCLUDED_PLUGINS="$(VPP_EXCLUDED_PLUGINS)"
-endif
-ifneq (${SOURCE_DATE_EPOCH}),)
-vpp_cmake_args += -DVPP_SOURCE_DATE_EPOCH="$(SOURCE_DATE_EPOCH)"
-endif
 
 ifneq ($(VPP_EXTRA_CMAKE_ARGS),)
 vpp_cmake_args += $(VPP_EXTRA_CMAKE_ARGS)

build-root/Makefile

@@ -39,7 +39,7 @@
 ######################################################################
 
 # Scripts require non-POSIX parts of bash
-SHELL := $(shell which bash)
+SHELL := /bin/bash
 
 # Where this makefile lives
 MU_BUILD_ROOT_DIR = $(shell pwd)
@@ -365,7 +365,7 @@ NATIVE_TOOLS_$(IS_LINUX) += $(NATIVE_TOOLS_LINUX)
 CROSS_TOOLS_$(IS_LINUX) += glibc gcc
 
 # must be first for bootstrapping
-NATIVE_TOOLS = findutils $(MAKE)
+NATIVE_TOOLS = findutils make
 
 # basic tools needed for build system
 NATIVE_TOOLS += git automake autoconf libtool texinfo tar
@@ -614,7 +614,7 @@ check_platform =								\
        -a ! -x "`which 2> /dev/null $${target_gcc}`" ] ; then			\
     $(call build_msg_fn,							\
 	   No cross-compiler found for platform $(PLATFORM) target $(TARGET);	\
-	     try $(MAKE) PLATFORM=$(PLATFORM) install-tools) ;			\
+	     try make PLATFORM=$(PLATFORM) install-tools) ;			\
     exit 1 ;									\
   fi
 
@@ -650,18 +650,11 @@ configure_check_timestamp =						\
 # /proc/cpuinfo does not exist on platforms without a /proc and on some
 # platforms, notably inside containers, it has no content. In those cases
 # we assume there's 1 processor; we use 2*ncpu for the -j option.
-#
-# On FreeBSD we can call nproc to get the number of processors.
-#
 # NB: GNU Make 4.2 will let us use '$(file </proc/cpuinfo)' to both test
 # for file presence and content; for now this will have to do.
 ifndef MAKE_PARALLEL_JOBS
-ifeq ($(shell uname), FreeBSD)
-MAKE_PARALLEL_JOBS = $(shell nproc)
-else
 MAKE_PARALLEL_JOBS = $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo), \
 	$(shell grep -c ^processor /proc/cpuinfo), 2)
-endif	# FreeBSD
 endif
 MAKE_PARALLEL_FLAGS ?= $(if $($(PACKAGE)_make_parallel_fails),,-j $(MAKE_PARALLEL_JOBS))
 
@@ -807,7 +800,7 @@ pull-all:
 	$(call build_msg_fn,Git pull build tools) ;				\
 	$(call tool_make_target_fn,pull-all) ;					\
 	$(call build_msg_fn,Git pull packages for platform $(PLATFORM)) ;	\
-	$(MAKE) PLATFORM=$(PLATFORM) $(patsubst %,%-pull-all,$(ROOT_PACKAGES))
+	make PLATFORM=$(PLATFORM) $(patsubst %,%-pull-all,$(ROOT_PACKAGES))
 
 .PHONY: %-diff
 %-diff:
@@ -969,13 +962,13 @@ $(PLATFORM_IMAGE_DIR)/ro.img ro-image: $(patsubst %,%-find-source,$(ROOT_PACKAGE
 	chmod 0755 $${tmp_dir} ;					\
 	cd $${tmp_dir} ;						\
 	trap "rm -rf $${tmp_dir}" err ;					\
-	fakeroot $(SHELL) -c "{					\
+	fakeroot /bin/bash -c "{					\
 	  set -eu$(BUILD_DEBUG) ;					\
 	  $(MAKE) -C $(MU_BUILD_ROOT_DIR) IMAGE_INSTALL_DIR=$${tmp_dir}	\
 	    $(patsubst %,%-image_install,				\
 	      basic_system						\
 	      $(ROOT_PACKAGES)) ;					\
-	  : $(MAKE) dev directory ;					\
+	  : make dev directory ;					\
 	  $(linuxrc_makedev) ;						\
 	  echo @@@@ Relocating ELF executables to run in / @@@@ ;	\
 	  scripts/set-rpath /$(arch_lib_dir):/lib ;			\
@@ -1061,7 +1054,7 @@ rw-image: rw-image-check-type ro-image
 	chmod 0755 $${tmp_dir} ;				\
 	cd $${tmp_dir} ;					\
 	trap "rm -rf $${tmp_dir}" err ;				\
-	fakeroot $(SHELL) -c "{				\
+	fakeroot /bin/bash -c "{				\
 	  set -eu$(BUILD_DEBUG) ;				\
 	  $(linuxrc_makedev) ;					\
 	  $(call rw_image_embed_ro_image_fn,$${ro_image}) ;	\

build-root/scripts/set-rpath

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 # Copyright (c) 2015 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");

build/external/Makefile

@@ -12,21 +12,17 @@
 # limitations under the License.
 
 # Scripts require non-POSIX parts of bash
-SHELL := $(shell which bash)
+SHELL := /bin/bash
 
 DL_CACHE_DIR = $(HOME)/Downloads
+MAKE ?= make
 MAKE_ARGS ?= -j
 BUILD_DIR        ?= $(CURDIR)/_build
 INSTALL_DIR      ?= $(CURDIR)/_install
-PKG_VERSION ?= $(shell git describe --abbrev=0 --match 'v[0-9]*' | cut -d- -f1 | cut -dv -f2 | cut -d. -f1,2)
+PKG_VERSION ?= $(shell git describe --abbrev=0 | cut -d- -f1 | cut -dv -f2 | cut -d. -f1,2)
 PKG_SUFFIX ?= $(shell git log --oneline v$(PKG_VERSION)-rc0.. . | wc -l)
-SOURCE_DATE_EPOCH ?= $(shell git log -1 --pretty=%ct .)
-ifeq ($shell(uname), FreeBSD)
-JOBS := $(shell nproc)
-else
 JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\
 	$(shell grep -c ^processor /proc/cpuinfo), 2)
-endif	# FreeBSD
 
 B := $(BUILD_DIR)
 I := $(INSTALL_DIR)
@@ -38,35 +34,24 @@ CMAKE?=cmake
 endif
 
 ARCH_X86_64=$(filter x86_64,$(shell uname -m))
-AARCH64=$(filter aarch64,$(shell uname -m))
 
 include packages.mk
+include packages/nasm.mk
 include packages/ipsec-mb.mk
 include packages/quicly.mk
-ifneq ($(shell uname), FreeBSD)
-include packages/rdma-core.mk
 include packages/dpdk.mk
-include packages/xdp-tools.mk
-include packages/octeon-roc.mk
-endif	# FreeBSD
+include packages/rdma-core.mk
+include packages/libbpf.mk
 
 .PHONY: clean
 clean:
 	@rm -rf $(B) $(I)
 
 .PHONY: install
-ifeq ($(shell uname), FreeBSD)
-install: $(if $(ARCH_X86_64), ipsec-mb-install) quicly-install
-else
-install: $(if $(ARCH_X86_64), ipsec-mb-install) dpdk-install rdma-core-install quicly-install xdp-tools-install $(if $(AARCH64), octeon-roc-install)
-endif	# FreeBSD
+install: $(if $(ARCH_X86_64), nasm-install ipsec-mb-install) dpdk-install rdma-core-install quicly-install libbpf-install
 
 .PHONY: config
-ifeq ($(shell uname), FreeBSD)
-config: $(if $(ARCH_X86_64), ipsec-mb-config) quicly-build
-else
-config: $(if $(ARCH_X86_64), ipsec-mb-config) dpdk-config rdma-core-config quicly-build
-endif	# FreeBSD
+config: $(if $(ARCH_X86_64), nasm-config ipsec-mb-config) dpdk-config rdma-core-config quicly-build
 
 ##############################################################################
 # .deb packaging
@@ -84,7 +69,7 @@ deb/debian/changelog: Makefile
 	@echo "" >> $@
 	@echo "  * Version $(DEB_VER)" >> $@
 	@echo "" >> $@
-	@echo " -- VPP Dev <vpp-dev@lists.fd.io>  $(shell date -R --date=@${SOURCE_DATE_EPOCH})" >> $@
+	@echo " -- VPP Dev <vpp-dev@lists.fd.io>  $(shell date -R)" >> $@
 
 $(DEV_DEB): deb/debian/changelog
 	@cd deb && dpkg-buildpackage -b -uc -us
@@ -172,17 +157,17 @@ ifeq ($(INSTALLED_VER)$(INSTALLED_RPM_VER),)
 	@echo "development package by invoking 'make install-ext-deps'"
 	@echo "from the top level directory"
 	@echo "=========================================================="
-	$(MAKE) config
+	make config
 else
 ifneq ($(INSTALLED_VER),)
 	make check-deb
 endif
 ifneq ($(INSTALLED_RPM_VER),)
-	$(MAKE) check-rpm
+	make check-rpm
 endif
 endif
 
 ebuild-install:
 ifeq ($(INSTALLED_VER)$(INSTALLED_RPM_VER),)
-	$(MAKE) install
+	make install
 endif

build/external/deb/debian/rules

@@ -1,9 +1,6 @@
 #!/usr/bin/make -f
 DH_VERBOSE = 1
 DEB_BUILD_OPTIONS = noddebs
-DEB_CFLAGS_MAINT_STRIP = -flto=auto -ffat-lto-objects -flto=auto -ffat-lto-objects -O2
-DEB_LDFLAGS_MAINT_STRIP = -flto=auto -ffat-lto-objects -flto=auto -ffat-lto-objects
-DEB_CFLAGS_MAINT_APPEND = -O3
 PKG=vpp-ext-deps
 
 VERSION = $(shell dpkg-parsechangelog | sed -nr '/^Version:/s/Version: //p')
@@ -26,8 +23,5 @@ override_dh_auto_configure:
 
 override_dh_install:
 	make $(MAKE_ARGS) install
-	@mkdir -p $(INSTALL_DIR)
 	dh_install -p$(PKG) --autodest /opt
 
-override_dh_shlibdeps:
-	dh_shlibdeps -l$(INSTALL_DIR)lib/

build/external/mlx_rdma_dpdk_matrix.txt

@@ -1,2 +0,0 @@
-rdma=49.0 dpdk=23.11
-rdma=51.0 dpdk=24.03

build/external/packages.mk

@@ -101,18 +101,11 @@ define $1_config_cmds
 endef
 endif
 
-ifneq ($(filter $1,$(VPP_SKIP_EXTERNAL)), $1)
-$(B)/.$1.config.ok: $(B)/.$1.patch.ok $(addprefix $(B)/.,$(addsuffix .install.ok,$($1_depends)))
+$(B)/.$1.config.ok: $(B)/.$1.patch.ok $(addsuffix -install,$($1_depends))
 	$$(call h1,"configuring $1 $($1_version) - log: $$($1_config_log)")
 	@mkdir -p $$($1_build_dir)
 	$$(call $1_config_cmds)
 	@touch $$@
-else
-$(B)/.$1.config.ok:
-	$$(call h1,"Skipping $1 $($1_version)")
-	@mkdir -p $(B)
-	@touch $$@
-endif
 
 .PHONY: $1-config
 $1-config: $(B)/.$1.config.ok
@@ -127,17 +120,10 @@ define $1_build_cmds
 endef
 endif
 
-ifneq ($(filter $1,$(VPP_SKIP_EXTERNAL)), $1)
 $(B)/.$1.build.ok: $(B)/.$1.config.ok
 	$$(call h1,"building $1 $($1_version) - log: $$($1_build_log)")
 	$$(call $1_build_cmds)
 	@touch $$@
-else
-$(B)/.$1.build.ok:
-	$$(call h1,"Skipping $1 $($1_version)")
-	@mkdir -p $(B)
-	@touch $$@
-endif
 
 .PHONY: $1-build
 $1-build: $(B)/.$1.build.ok
@@ -152,24 +138,13 @@ define $1_install_cmds
 endef
 endif
 
-ifneq ($(filter $1,$(VPP_SKIP_EXTERNAL)), $1)
 $(B)/.$1.install.ok: $(B)/.$1.build.ok
 	$$(call h1,"installing $1 $($1_version) - log: $$($1_install_log)")
 	$$(call $1_install_cmds)
 	@touch $$@
-else
-$(B)/.$1.install.ok:
-	$$(call h1,"Skipping $1 $($1_version)")
-	@mkdir -p $(B)
-	@touch $$@
-endif
 
 .PHONY: $1-install
 $1-install: $(B)/.$1.install.ok
 
-.PHONY: $1-show-%
-$1-show-%:
-	@echo $$($$*)
-
 ALL_TARGETS += $1-install
 endef

build/external/packages/dpdk.mk

@@ -14,34 +14,23 @@
 DPDK_PKTMBUF_HEADROOM        ?= 128
 DPDK_USE_LIBBSD              ?= n
 DPDK_DEBUG                   ?= n
+DPDK_MLX4_PMD                ?= n
+DPDK_MLX5_PMD                ?= n
+DPDK_MLX5_COMMON_PMD         ?= n
 DPDK_TAP_PMD                 ?= n
 DPDK_FAILSAFE_PMD            ?= n
 DPDK_MACHINE                 ?= default
 DPDK_MLX_IBV_LINK            ?= static
 
-dpdk_version                 ?= 24.03
+dpdk_version                 ?= 21.08
 dpdk_base_url                ?= http://fast.dpdk.org/rel
 dpdk_tarball                 := dpdk-$(dpdk_version).tar.xz
-dpdk_tarball_md5sum_24.03    := a98da848d6ba09808ef00f9a26aaa49a
-dpdk_tarball_md5sum_23.11    := 896c09f5b45b452bd77287994650b916
-dpdk_tarball_md5sum_23.07    := 2b6d57f077585cb15b885482362fd47f
-dpdk_tarball_md5sum_23.03    := 3cf8ebbcd412d5726db230f2eeb90cc9
-dpdk_tarball_md5sum_22.11.1  := 0594708fe42ce186a55b0235c6e20cfe
-dpdk_tarball_md5sum_22.07    := fb73b58b80b1349cd05fe9cf6984afd4
-dpdk_tarball_md5sum_22.03    := a07ca8839f98062f46e1cc359735cce8
-dpdk_tarball_md5sum_21.11    := 58660bbbe9e95abce86e47692b196555
+dpdk_tarball_md5sum_21.08    := de33433a1806280996a0ecbe66e3642f
+dpdk_tarball_md5sum_21.05    := a78bba290b11d9717d1272cc6bfaf7c3
 dpdk_tarball_md5sum          := $(dpdk_tarball_md5sum_$(dpdk_version))
 dpdk_url                     := $(dpdk_base_url)/$(dpdk_tarball)
 dpdk_tarball_strip_dirs      := 1
-ifeq ($(shell uname), FreeBSD)
-dpdk_depends		     := $(if $(ARCH_X86_64), ipsec-mb)
-else
 dpdk_depends		     := rdma-core $(if $(ARCH_X86_64), ipsec-mb)
-endif
-DPDK_MLX_DEFAULT             := $(shell if grep -q "rdma=$(rdma-core_version) dpdk=$(dpdk_version)" mlx_rdma_dpdk_matrix.txt; then echo 'y'; else echo 'n'; fi)
-DPDK_MLX4_PMD                ?= $(DPDK_MLX_DEFAULT)
-DPDK_MLX5_PMD                ?= $(DPDK_MLX_DEFAULT)
-DPDK_MLX5_COMMON_PMD         ?= $(DPDK_MLX_DEFAULT)
 # Debug or release
 
 DPDK_BUILD_TYPE:=release
@@ -52,12 +41,10 @@ endif
 DPDK_DRIVERS_DISABLED := baseband/\*,	\
 	bus/dpaa,							\
 	bus/ifpga,							\
-	common/cnxk,						\
 	compress/isal,						\
 	compress/octeontx,					\
 	compress/zlib,						\
 	crypto/ccp,							\
-	crypto/cnxk,						\
 	crypto/dpaa_sec,					\
 	crypto/openssl,						\
 	crypto/aesni_mb,						\
@@ -67,11 +54,9 @@ DPDK_DRIVERS_DISABLED := baseband/\*,	\
 	crypto/zuc,						\
 	event/\*,							\
 	mempool/dpaa,						\
-	mempool/cnxk,						\
 	net/af_packet,						\
 	net/bnx2x,							\
 	net/bonding,						\
-	net/cnxk,							\
 	net/ipn3ke,							\
 	net/liquidio,						\
 	net/pcap,							\
@@ -87,7 +72,6 @@ DPDK_LIBS_DISABLED := acl,				\
 	bitratestats,						\
 	bpf,								\
 	cfgfile,							\
-	cnxk,							\
 	distributor,						\
 	efd,								\
 	fib,								\
@@ -137,19 +121,14 @@ endif
 DPDK_DRIVERS_DISABLED := $(shell echo $(DPDK_DRIVERS_DISABLED) | tr -d '\\\t ')
 DPDK_LIBS_DISABLED := $(shell echo $(DPDK_LIBS_DISABLED) | tr -d '\\\t ')
 
-SED=sed
-ifeq ($shell(uname), FreeBSD)
-SED=gsed
-endif
-
 HASH := \#
 # post-meson-setup snippet to alter rte_build_config.h
 define dpdk_config
 if grep -q RTE_$(1) $(dpdk_src_dir)/config/rte_config.h ; then	\
-$(SED) -i -e 's/$(HASH)define RTE_$(1).*/$(HASH)define RTE_$(1) $(DPDK_$(1))/' \
+sed -i -e 's/$(HASH)define RTE_$(1).*/$(HASH)define RTE_$(1) $(DPDK_$(1))/' \
 	$(dpdk_src_dir)/config/rte_config.h; \
 elif grep -q RTE_$(1) $(dpdk_build_dir)/rte_build_config.h ; then \
-$(SED) -i -e 's/$(HASH)define RTE_$(1).*/$(HASH)define RTE_$(1) $(DPDK_$(1))/' \
+sed -i -e 's/$(HASH)define RTE_$(1).*/$(HASH)define RTE_$(1) $(DPDK_$(1))/' \
 	$(dpdk_build_dir)/rte_build_config.h; \
 else \
 echo '$(HASH)define RTE_$(1) $(DPDK_$(1))' \
@@ -165,7 +144,7 @@ if [[ "$(DPDK_$(1))" == "y" ]]; then \
           >> $(dpdk_build_dir)/rte_build_config.h ; \
     fi; \
 elif [[ "$(DPDK_$(1))" == "n" ]]; then \
-    $(SED) -i '/$(HASH)define RTE_$(1) .*/d' $(dpdk_build_dir)/rte_build_config.h \
+    sed -i '/$(HASH)define RTE_$(1) .*/d' $(dpdk_build_dir)/rte_build_config.h \
       $(dpdk_src_dir)/config/rte_config.h ; \
 fi
 endef
@@ -175,26 +154,23 @@ DPDK_MESON_ARGS = \
 	--libdir lib \
 	--prefix $(dpdk_install_dir) \
 	-Dtests=false \
-	-Denable_driver_sdk=true \
 	"-Ddisable_drivers=$(DPDK_DRIVERS_DISABLED)" \
 	"-Ddisable_libs=$(DPDK_LIBS_DISABLED)" \
 	-Db_pie=true \
 	-Dmachine=$(DPDK_MACHINE) \
 	--buildtype=$(DPDK_BUILD_TYPE) \
-	-Denable_kmods=false \
 	${DPDK_MLX_CONFIG_FLAG}
 
 PIP_DOWNLOAD_DIR = $(CURDIR)/downloads/
 
 define dpdk_config_cmds
 	cd $(dpdk_build_dir) && \
-	echo "DPDK_MLX_DEFAULT=$(DPDK_MLX_DEFAULT)" > ../../../dpdk_mlx_default.sh && \
 	rm -rf ../dpdk-meson-venv && \
 	mkdir -p ../dpdk-meson-venv && \
 	python3 -m venv ../dpdk-meson-venv && \
 	source ../dpdk-meson-venv/bin/activate && \
-	(if ! ls $(PIP_DOWNLOAD_DIR)meson* ; then pip3 download -d $(PIP_DOWNLOAD_DIR) -f $(DL_CACHE_DIR) meson==0.55.3 setuptools wheel pyelftools; fi) && \
-	pip3 install --no-index --find-links=$(PIP_DOWNLOAD_DIR) meson==0.55.3 pyelftools && \
+	(if ! ls $(PIP_DOWNLOAD_DIR)meson* ; then pip3 download -d $(PIP_DOWNLOAD_DIR) -f $(DL_CACHE_DIR) meson==0.55 setuptools wheel pyelftools; fi) && \
+	pip3 install --no-index --find-links=$(PIP_DOWNLOAD_DIR) meson==0.55 pyelftools && \
 	PKG_CONFIG_PATH=$(dpdk_install_dir)/lib/pkgconfig meson setup $(dpdk_src_dir) \
 		$(dpdk_build_dir) \
 		$(DPDK_MESON_ARGS) \

build/external/packages/ipsec-mb.mk

@@ -11,21 +11,16 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-ipsec-mb_version             := 1.5
-ipsec-mb_patch_version       := 0
-ipsec-mb_version_str         := $(ipsec-mb_version).$(ipsec-mb_patch_version)
+ipsec-mb_version             := 1.0
 ipsec-mb_tarball             := v$(ipsec-mb_version).tar.gz
+ipsec-mb_tarball_md5sum_0.54 := 258941f7ba90c275fcf9d19c622d2d21
+ipsec-mb_tarball_md5sum_0.55 := deca674bca7ae2282890e1fa7f953609
 ipsec-mb_tarball_md5sum_1.0  := 906e701937751e761671dc83a41cff65
-ipsec-mb_tarball_md5sum_1.1  := 3916471d3713d27e42473cb6af9c65e5
-ipsec-mb_tarball_md5sum_1.2  := f551d9c208893a436c1f5c146a615bd6
-ipsec-mb_tarball_md5sum_1.3  := d8692db9efe32a263b61f12ac0dca950
-ipsec-mb_tarball_md5sum_1.4  := fddba2611f822296ddd82d1c31d22b24
-ipsec-mb_tarball_md5sum_1.5  := f18680f8dd43208a15a19a494423bdb9
 
 ipsec-mb_tarball_md5sum      := $(ipsec-mb_tarball_md5sum_$(ipsec-mb_version))
 ipsec-mb_tarball_strip_dirs  := 1
-ipsec-mb_url                 := http://github.com/intel/intel-ipsec-mb/archive/$(ipsec-mb_tarball)
-ipsec-mb_system_header       := $(wildcard /usr/include/intel-ipsec-mb.h)
+ipsec-mb_url                 := http://github.com/01org/intel-ipsec-mb/archive/$(ipsec-mb_tarball)
+ipsec-mb_depends             := nasm
 
 define  ipsec-mb_config_cmds
 	@true
@@ -38,25 +33,11 @@ define  ipsec-mb_build_cmds
 	  SAFE_LOOKUP=n \
 	  SAFE_DATA=n \
 	  PREFIX=$(ipsec-mb_install_dir) \
+	  NASM=$(ipsec-mb_install_dir)/bin/nasm \
 	  EXTRA_CFLAGS="-g -msse4.2" > $(ipsec-mb_build_log)
 endef
 
-ifneq   ($(ipsec-mb_system_header), )
-	ipsec-mb_system_ver_str := $(shell awk '/^#define\s+IMB_VERSION_STR/ { print $$3 }' \
-	$(ipsec-mb_system_header))
-endif
-
 define  ipsec-mb_install_cmds
-	if [[ -n "$(ipsec-mb_system_header)" ]]; then \
-		if [[ "$(ipsec-mb_system_ver_str)" != "$(ipsec-mb_version_str)" ]]; then \
-		echo "Intel-ipsec-mb build Error: System installed Intel IPsec-mb lib \
-		version mismatch with target version, \
-		expecting $(ipsec-mb_version_str), \
-		but system has $(ipsec-mb_system_ver_str) \
-		please align/remove system installed $(ipsec-mb_system_header) before building."; \
-		exit 1; \
-		fi \
-	fi
 	@mkdir -p $(ipsec-mb_install_dir)/include
 	@mkdir -p $(ipsec-mb_install_dir)/lib
 	@cp $(ipsec-mb_src_dir)/lib/intel-ipsec-mb.h $(ipsec-mb_install_dir)/include

build/external/packages/libbpf.mk

@@ -0,0 +1,58 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+LIBBPF_DEBUG?=n
+
+libbpf_version             := 0.2
+libbpf_tarball             := v$(libbpf_version).tar.gz
+libbpf_tarball_md5sum_0.2  := cd0f82d76a9830c1e66b1a249393d5a8
+libbpf_tarball_md5sum_0.1.0 := 00b991a6e2d28d797a56ab1575ed40e1
+libbpf_tarball_md5sum      := $(libbpf_tarball_md5sum_$(libbpf_version))
+libbpf_tarball_strip_dirs  := 1
+libbpf_url                 := https://github.com/libbpf/libbpf/archive/$(libbpf_tarball)
+
+LIBBPF_CFLAGS:=-g -Werror -Wall -fPIC -fvisibility=hidden
+ifeq ($(LIBBPF_DEBUG),y)
+  LIBBPF_CFLAGS+= -O0
+else
+  LIBBPF_CFLAGS+= -O2
+endif
+
+# check for libelf, zlib and kernel if_xdp.h presence
+LIBBPF_DEPS_CHECK:="\#include <linux/if_xdp.h>\\n\#include <gelf.h>\\n\#include <zlib.h>\\nint main(void){return 0;}"
+LIBBPF_DEPS_CHECK:=$(shell echo -e $(LIBBPF_DEPS_CHECK) | $(CC) -xc -lelf -lz -o /dev/null - > /dev/null 2>&1)
+LIBBPF_DEPS_CHECK:=$(.SHELLSTATUS)
+
+define  libbpf_config_cmds
+	@true
+endef
+
+define  libbpf_build_cmds__
+	BUILD_STATIC_ONLY=y OBJDIR='$(libbpf_build_dir)' PREFIX='' DESTDIR='$(libbpf_install_dir)' CFLAGS='$(LIBBPF_CFLAGS)' make -C '$(libbpf_src_dir)/src' $(1) > $(2)
+endef
+
+define  libbpf_build_cmds
+	$(call libbpf_build_cmds__,,$(libbpf_build_log))
+endef
+
+define  libbpf_install_cmds
+	$(call libbpf_build_cmds__,install,$(libbpf_install_log))
+endef
+
+ifneq ($(LIBBPF_DEPS_CHECK),0)
+  $(warning "Missing libbpf dependencies. libbpf will be skipped.")
+libbpf-install:
+	@true
+else
+  $(eval $(call package,libbpf))
+endif

build/external/packages/nasm.mk

@@ -1,5 +1,4 @@
-
-# Copyright (c) 2022 Cisco and/or its affiliates.
+# Copyright (c) 2018 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -12,14 +11,11 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-add_vpp_plugin(fateshare
-  SOURCES
-  fateshare.c
-  fateshare.h
-)
-
-add_vpp_executable(vpp_fateshare_monitor
-  SOURCES vpp_fateshare_monitor.c
-  LINK_LIBRARIES vppinfra
-)
+nasm_version            := 2.14.02
+nasm_tarball            := nasm-$(nasm_version).tar.xz
+nasm_tarball_md5sum     := 6390bd67b07ff1df9fe628b6929c0353
+nasm_tarball_strip_dirs := 1
+nasm_url                := https://ftp.osuosl.org/pub/blfs/conglomeration/nasm/$(nasm_tarball)
+nasm_cflags             := -Wno-implicit-fallthrough -std=c11
 
+$(eval $(call package,nasm))

build/external/packages/octeon-roc.mk

@@ -1,26 +0,0 @@
-# Copyright (c) 2023 Marvell.
-# SPDX-License-Identifier: Apache-2.0
-# https://spdx.org/licenses/Apache-2.0.html
-
-octeon-roc_version             := 0.5
-octeon-roc_tarball             := v$(octeon-roc_version).tar.gz
-octeon-roc_tarball_md5sum      := 76bc56c84935da944bbf340fe5283ef0
-
-octeon-roc_tarball_strip_dirs  := 1
-octeon-roc_url                 := https://github.com/MarvellEmbeddedProcessors/marvell-octeon-roc/archive/refs/tags/$(octeon-roc_tarball)
-
-define  octeon-roc_config_cmds
-	@true
-endef
-
-define  octeon-roc_build_cmds
-	@cd ${octeon-roc_src_dir} && rm -f $(octeon-roc_build_log) && $(CMAKE) ${octeon-roc_src_dir} -DCMAKE_INSTALL_PREFIX='$(octeon-roc_install_dir)' >> $(octeon-roc_build_log)
-	@$(MAKE) -C ${octeon-roc_src_dir} >> $(octeon-roc_build_log)
-endef
-
-define  octeon-roc_install_cmds
-	@$(MAKE) -C ${octeon-roc_src_dir} install >> $(octeon-roc_install_log)
-endef
-
-$(eval $(call package,octeon-roc))
-

build/external/packages/quicly.mk

@@ -11,9 +11,9 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-quicly_version := 0.1.4-vpp
+quicly_version := 0.1.3-vpp
 quicly_tarball := quicly_$(quicly_version).tar.gz
-quicly_tarball_md5sum := 5419a0f340c5572bcf682c08acc84c77
+quicly_tarball_md5sum := 195f156f311458f1bd4540765e62dd27
 quicly_tarball_strip_dirs := 1
 quicly_url := https://github.com/vpp-quic/quicly/releases/download/v$(quicly_version)/quicly_$(quicly_version).tar.gz
 
@@ -21,17 +21,16 @@ picotls_build_dir := $(B)/build-picotls
 
 define  quicly_build_cmds
 	@cd $(quicly_build_dir) && \
-		rm -f $(quicly_build_log) && \
 		$(CMAKE) -DWITH_DTRACE=OFF \
 		         -DCMAKE_INSTALL_PREFIX:PATH=$(quicly_install_dir) \
-		$(quicly_src_dir) >> $(quicly_build_log)
-	@$(MAKE) quicly $(MAKE_ARGS) -C $(quicly_build_dir) >> $(quicly_build_log)
+		$(quicly_src_dir) > $(quicly_build_log)
+	@$(MAKE) quicly $(MAKE_ARGS) -C $(quicly_build_dir) > $(quicly_build_log)
 
 	@mkdir -p $(picotls_build_dir)
 	@cd $(picotls_build_dir) && \
 		$(CMAKE) -DWITH_DTRACE=OFF -DCMAKE_INSTALL_PREFIX:PATH=$(quicly_install_dir) \
-		$(quicly_src_dir)/deps/picotls >> $(quicly_build_log)
-	@$(MAKE) picotls-core picotls-openssl $(MAKE_ARGS) -C $(picotls_build_dir) >> $(quicly_build_log)
+		$(quicly_src_dir)/deps/picotls > $(quicly_build_log)
+	@$(MAKE) picotls-core picotls-openssl $(MAKE_ARGS) -C $(picotls_build_dir) > $(quicly_build_log)
 endef
 
 define  quicly_config_cmds
@@ -39,9 +38,8 @@ define  quicly_config_cmds
 endef
 
 define  quicly_install_cmds
-	@rm -f $(quicly_install_log)
-	@$(MAKE) $(MAKE_ARGS) -C $(quicly_build_dir) install >> $(quicly_install_log)
-	@$(MAKE) $(MAKE_ARGS) -C $(picotls_build_dir) install >> $(quicly_install_log)
+	@$(MAKE) $(MAKE_ARGS) -C $(quicly_build_dir) install > $(quicly_install_log)
+	@$(MAKE) $(MAKE_ARGS) -C $(picotls_build_dir) install > $(quicly_install_log)
 endef
 
 

build/external/packages/rdma-core.mk

@@ -13,20 +13,10 @@
 
 RDMA_CORE_DEBUG?=n
 
-# NOTE: When updating the rdma-core version in conjunction with an update of the
-#       dpdk version, please update ../mlx_rdma_dpdk_matrix.txt to include the
-#       updated version matrix with the dpdk and rdma-core version.
-#
-#       Also, please verify that the DPDK RDMA driver is built into the dpdk plugin
-#       as follows:
-#       	1. from workspace root directory, 'make -C build/external build-deb'
-#       	2. Verify that the file build/external/dpdk_mlx_default.sh was generated
-#              and contains 'DPDK_MLX_DEFAULT=y'
-#
-rdma-core_version             := 51.0
+rdma-core_version             := 35.0
 rdma-core_tarball             := rdma-core-$(rdma-core_version).tar.gz
-rdma-core_tarball_md5sum_49.0 := 9fe3909f19c7e0276c9e546411bbb49c
-rdma-core_tarball_md5sum_51.0 := ed95d79f782ea00bd7233d453abd60b3
+rdma-core_tarball_md5sum_31.1 := f14b3eba775c2eba0d9433bfb3bae637
+rdma-core_tarball_md5sum_35.0 := 85afb89ec536ef229c0fef6cb87e8665
 rdma-core_tarball_md5sum      := $(rdma-core_tarball_md5sum_$(rdma-core_version))
 rdma-core_tarball_strip_dirs  := 1
 rdma-core_url                 := http://github.com/linux-rdma/rdma-core/releases/download/v$(rdma-core_version)/$(rdma-core_tarball)
@@ -42,16 +32,27 @@ define  rdma-core_config_cmds
 	    -DENABLE_STATIC=1 -DENABLE_RESOLVE_NEIGH=0 -DNO_PYVERBS=1 -DENABLE_VALGRIND=0\
 	    -DCMAKE_BUILD_TYPE=$(RDMA_BUILD_TYPE) -DCMAKE_INSTALL_PREFIX=$(rdma-core_install_dir) \
 	    -DCMAKE_INSTALL_LIBDIR=lib \
-	    -DCMAKE_INSTALL_RUNDIR:PATH=/run \
-	    -DCMAKE_C_FLAGS='-fPIC' -DNO_MAN_PAGES=ON | tee $(rdma-core_config_log)
+	    -DCMAKE_C_FLAGS='-fPIC -fvisibility=hidden' > $(rdma-core_config_log)
 endef
 
 define  rdma-core_build_cmds
-	$(CMAKE) --build $(rdma-core_build_dir) | tee $(rdma-core_build_log)
+	$(CMAKE) --build $(rdma-core_build_dir) -- libccan.a libibverbs.a librdma_util.a libmlx5.a libmlx4.a > $(rdma-core_build_log)
+	sed 's/^Libs.private:.*/Libs.private: -lmlx4 -lmlx5 -libverbs -lrdma_util -lccan -lpthread/' -i $(rdma-core_build_dir)/lib/pkgconfig/libibverbs.pc >> $(rdma-core_build_log)
 endef
 
 define  rdma-core_install_cmds
-	$(CMAKE) --install $(rdma-core_build_dir) | tee $(rdma-core_install_log)
+	mkdir -p $(rdma-core_install_dir)/lib/pkgconfig
+	cp -av $(rdma-core_build_dir)/include $(rdma-core_install_dir) > $(rdma-core_install_log)
+	cp -v $(rdma-core_build_dir)/lib/pkgconfig/libibverbs.pc \
+	  $(rdma-core_build_dir)/lib/pkgconfig/libmlx5.pc \
+	  $(rdma-core_build_dir)/lib/pkgconfig/libmlx4.pc \
+	  $(rdma-core_install_dir)/lib/pkgconfig >> $(rdma-core_install_log)
+	cp -v $(rdma-core_build_dir)/lib/statics/libibverbs.a \
+	  $(rdma-core_build_dir)/lib/statics/libmlx5.a \
+	  $(rdma-core_build_dir)/lib/statics/libmlx4.a \
+	  $(rdma-core_build_dir)/util/librdma_util.a \
+	  $(rdma-core_build_dir)/ccan/libccan.a \
+	  $(rdma-core_install_dir)/lib >> $(rdma-core_install_log)
 endef
 
 $(eval $(call package,rdma-core))

build/external/packages/xdp-tools.mk

@@ -1,38 +0,0 @@
-# Copyright (c) 2023 Intel and/or its affiliates.
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-xdp-tools_version             := 1.2.9
-xdp-tools_tarball             := xdp-tools-$(xdp-tools_version).tar.gz
-xdp-tools_tarball_md5sum_1.2.9:= 6e4a49ceea8354bb7bb3b55990e9aed7
-xdp-tools_tarball_md5sum      := $(xdp-tools_tarball_md5sum_$(xdp-tools_version))
-xdp-tools_tarball_strip_dirs  := 1
-xdp-tools_url                 := https://github.com/xdp-project/xdp-tools/releases/download/v$(xdp-tools_version)/$(xdp-tools_tarball)
-
-define  xdp-tools_config_cmds
-	@true
-endef
-
-define  xdp-tools_build_cmds
-	@cd ${xdp-tools_src_dir} && make V=1 BUILD_STATIC_ONLY=y > $(xdp-tools_build_log)
-endef
-
-define  xdp-tools_install_cmds
-	@rm -f $(xdp-tools_install_log)
-	@cd ${xdp-tools_src_dir} && \
-		make -C lib/libbpf/src install V=1 BUILD_STATIC_ONLY=y PREFIX='' DESTDIR='$(xdp-tools_install_dir)' >> $(xdp-tools_install_log)
-	@cd ${xdp-tools_src_dir} && \
-		make libxdp_install V=1 BUILD_STATIC_ONLY=y PREFIX='' DESTDIR='$(xdp-tools_install_dir)' >> $(xdp-tools_install_log)
-endef
-
-$(eval $(call package,xdp-tools))

build/external/patches/dpdk_21.11/0001-common-qat-add-gen4-b-support.patch

@@ -1,35 +0,0 @@
-From 939eb3d245e794679abc3c90be035e073a756b78 Mon Sep 17 00:00:00 2001
-From: Fan Zhang <roy.fan.zhang@intel.com>
-Date: Thu, 13 Jan 2022 09:44:46 +0000
-Subject: [PATCH] common/qat: add gen4 b support
-
-Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
----
- drivers/common/qat/qat_device.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/drivers/common/qat/qat_device.c b/drivers/common/qat/qat_device.c
-index 437996f2e8..1f870d689a 100644
---- a/drivers/common/qat/qat_device.c
-+++ b/drivers/common/qat/qat_device.c
-@@ -47,6 +47,9 @@ static const struct rte_pci_id pci_id_qat_map[] = {
- 		{
- 			RTE_PCI_DEVICE(0x8086, 0x4941),
- 		},
-+		{
-+			RTE_PCI_DEVICE(0x8086, 0x4943),
-+		},
- 		{.device_id = 0},
- };
- 
-@@ -192,6 +195,7 @@ qat_pci_device_allocate(struct rte_pci_device *pci_dev,
- 		qat_dev_gen = QAT_GEN3;
- 		break;
- 	case 0x4941:
-+	case 0x4943:
- 		qat_dev_gen = QAT_GEN4;
- 		break;
- 	default:
--- 
-2.25.1
-

build/external/patches/dpdk_21.11/0001-net-igc-Add-device-ID-for-i226v.patch

@@ -1,137 +0,0 @@
-From f4192afd7712a8d6be1e80af7478a12caaaa8917 Mon Sep 17 00:00:00 2001
-From: Matthew Smith <mgsmith@netgate.com>
-Date: Fri, 25 Feb 2022 16:15:40 -0600
-Subject: [PATCH] net/igc: Add device ID for i226v
-
-Add the device ID 0x125C in order to enable the i226v.
-Add phy ID for the i226 and allow that ID anywhere the phy ID for the
-i225 was allowed.
----
- drivers/net/igc/base/igc_api.c     |  1 +
- drivers/net/igc/base/igc_defines.h |  1 +
- drivers/net/igc/base/igc_hw.h      |  1 +
- drivers/net/igc/base/igc_i225.c    |  1 +
- drivers/net/igc/base/igc_phy.c     | 11 ++++++-----
- drivers/net/igc/igc_ethdev.c       |  1 +
- 6 files changed, 11 insertions(+), 5 deletions(-)
-
-diff --git a/drivers/net/igc/base/igc_api.c b/drivers/net/igc/base/igc_api.c
-index 2f8c0753cb..da51ef2d59 100644
---- a/drivers/net/igc/base/igc_api.c
-+++ b/drivers/net/igc/base/igc_api.c
-@@ -888,6 +888,7 @@ s32 igc_set_mac_type(struct igc_hw *hw)
- 	case IGC_DEV_ID_I225_I:
- 	case IGC_DEV_ID_I220_V:
- 	case IGC_DEV_ID_I225_BLANK_NVM:
-+	case IGC_DEV_ID_I226_V:
- 		mac->type = igc_i225;
- 		break;
- 	case IGC_DEV_ID_I350_VF:
-diff --git a/drivers/net/igc/base/igc_defines.h b/drivers/net/igc/base/igc_defines.h
-index 30a41300f5..767587a171 100644
---- a/drivers/net/igc/base/igc_defines.h
-+++ b/drivers/net/igc/base/igc_defines.h
-@@ -1351,6 +1351,7 @@
- #define IGP04IGC_E_PHY_ID	0x02A80391
- #define M88_VENDOR		0x0141
- #define I225_I_PHY_ID		0x67C9DC00
-+#define I226_I_PHY_ID		0x67C9DC10
- 
- /* M88E1000 Specific Registers */
- #define M88IGC_PHY_SPEC_CTRL		0x10  /* PHY Specific Control Reg */
-diff --git a/drivers/net/igc/base/igc_hw.h b/drivers/net/igc/base/igc_hw.h
-index be38fafa5f..686fb721af 100644
---- a/drivers/net/igc/base/igc_hw.h
-+++ b/drivers/net/igc/base/igc_hw.h
-@@ -164,6 +164,7 @@ struct igc_hw;
- #define IGC_DEV_ID_I225_V			0x15F3
- #define IGC_DEV_ID_I225_K			0x3100
- #define IGC_DEV_ID_I225_I			0x15F8
-+#define IGC_DEV_ID_I226_V			0x125C
- #define IGC_DEV_ID_I220_V			0x15F7
- #define IGC_DEV_ID_I225_BLANK_NVM		0x15FD
- #define IGC_DEV_ID_I354_BACKPLANE_1GBPS	0x1F40
-diff --git a/drivers/net/igc/base/igc_i225.c b/drivers/net/igc/base/igc_i225.c
-index 060b2f8f93..8c078029f7 100644
---- a/drivers/net/igc/base/igc_i225.c
-+++ b/drivers/net/igc/base/igc_i225.c
-@@ -176,6 +176,7 @@ static s32 igc_init_phy_params_i225(struct igc_hw *hw)
- 	/* Verify phy id and set remaining function pointers */
- 	switch (phy->id) {
- 	case I225_I_PHY_ID:
-+	case I226_I_PHY_ID:
- 		phy->type		= igc_phy_i225;
- 		phy->ops.set_d0_lplu_state = igc_set_d0_lplu_state_i225;
- 		phy->ops.set_d3_lplu_state = igc_set_d3_lplu_state_i225;
-diff --git a/drivers/net/igc/base/igc_phy.c b/drivers/net/igc/base/igc_phy.c
-index 43bbe69bca..d46a6b3555 100644
---- a/drivers/net/igc/base/igc_phy.c
-+++ b/drivers/net/igc/base/igc_phy.c
-@@ -1474,8 +1474,7 @@ s32 igc_phy_setup_autoneg(struct igc_hw *hw)
- 			return ret_val;
- 	}
- 
--	if ((phy->autoneg_mask & ADVERTISE_2500_FULL) &&
--	    hw->phy.id == I225_I_PHY_ID) {
-+	if (phy->autoneg_mask & ADVERTISE_2500_FULL) {
- 	/* Read the MULTI GBT AN Control Register - reg 7.32 */
- 		ret_val = phy->ops.read_reg(hw, (STANDARD_AN_REG_MASK <<
- 					    MMD_DEVADDR_SHIFT) |
-@@ -1615,8 +1614,7 @@ s32 igc_phy_setup_autoneg(struct igc_hw *hw)
- 		ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL,
- 					     mii_1000t_ctrl_reg);
- 
--	if ((phy->autoneg_mask & ADVERTISE_2500_FULL) &&
--	    hw->phy.id == I225_I_PHY_ID)
-+	if (phy->autoneg_mask & ADVERTISE_2500_FULL)
- 		ret_val = phy->ops.write_reg(hw,
- 					     (STANDARD_AN_REG_MASK <<
- 					     MMD_DEVADDR_SHIFT) |
-@@ -1882,6 +1880,7 @@ s32 igc_phy_force_speed_duplex_m88(struct igc_hw *hw)
- 			/* fall-through */
- 			case I225_I_PHY_ID:
- 			/* fall-through */
-+			case I226_I_PHY_ID:
- 				reset_dsp = false;
- 				break;
- 			default:
-@@ -1923,7 +1922,7 @@ s32 igc_phy_force_speed_duplex_m88(struct igc_hw *hw)
- 		return IGC_SUCCESS;
- 	if (hw->phy.id == I210_I_PHY_ID)
- 		return IGC_SUCCESS;
--	if (hw->phy.id == I225_I_PHY_ID)
-+	if (hw->phy.type == igc_phy_i225)
- 		return IGC_SUCCESS;
- 	if (hw->phy.id == M88E1543_E_PHY_ID || hw->phy.id == M88E1512_E_PHY_ID)
- 		return IGC_SUCCESS;
-@@ -2480,6 +2479,7 @@ s32 igc_get_cable_length_m88_gen2(struct igc_hw *hw)
- 		phy->cable_length = phy_data / (is_cm ? 100 : 1);
- 		break;
- 	case I225_I_PHY_ID:
-+	case I226_I_PHY_ID:
- 		if (ret_val)
- 			return ret_val;
- 		/* TODO - complete with Foxville data */
-@@ -3064,6 +3064,7 @@ enum igc_phy_type igc_get_phy_type_from_id(u32 phy_id)
- 		phy_type = igc_phy_i210;
- 		break;
- 	case I225_I_PHY_ID:
-+	case I226_I_PHY_ID:
- 		phy_type = igc_phy_i225;
- 		break;
- 	default:
-diff --git a/drivers/net/igc/igc_ethdev.c b/drivers/net/igc/igc_ethdev.c
-index a1f1a9772b..0dd3a212d7 100644
---- a/drivers/net/igc/igc_ethdev.c
-+++ b/drivers/net/igc/igc_ethdev.c
-@@ -97,6 +97,7 @@ static const struct rte_pci_id pci_id_igc_map[] = {
- 	{ RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I225_V)  },
- 	{ RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I225_I)  },
- 	{ RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I225_K)  },
-+	{ RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I226_V)  },
- 	{ .vendor_id = 0, /* sentinel */ },
- };
- 
--- 
-2.30.1 (Apple Git-130)
-

build/external/patches/dpdk_21.11/0002-crypto-qat-fix-raw-data-path-aead.patch

@@ -1,47 +0,0 @@
-From 27c5c59aaf29236ba178ad18e399d3d6d9574739 Mon Sep 17 00:00:00 2001
-From: Fan Zhang <roy.fan.zhang@intel.com>
-Date: Mon, 17 Jan 2022 15:22:18 +0000
-Subject: [PATCH] crypto/qat: fix raw data path aead
-
-This patch fixes raw data path AEAD operation for 4th QAT
-generation.
-
-Fixes: 328d690d2f60 ("crypto/qat: update raw data path")
-
-Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
----
- drivers/crypto/qat/qat_sym_hw_dp.c | 11 +++++++++--
- 1 file changed, 9 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/crypto/qat/qat_sym_hw_dp.c b/drivers/crypto/qat/qat_sym_hw_dp.c
-index 12825e448b..02875b822e 100644
---- a/drivers/crypto/qat/qat_sym_hw_dp.c
-+++ b/drivers/crypto/qat/qat_sym_hw_dp.c
-@@ -520,6 +520,8 @@ enqueue_one_aead_job(struct qat_sym_session *ctx,
- {
- 	struct icp_qat_fw_la_cipher_req_params *cipher_param =
- 		(void *)&req->serv_specif_rqpars;
-+	struct icp_qat_fw_la_cipher_20_req_params *cipher_param20 =
-+		(void *)&req->serv_specif_rqpars;
- 	struct icp_qat_fw_la_auth_req_params *auth_param =
- 		(void *)((uint8_t *)&req->serv_specif_rqpars +
- 		ICP_QAT_FW_HASH_REQUEST_PARAMETERS_OFFSET);
-@@ -533,8 +535,13 @@ enqueue_one_aead_job(struct qat_sym_session *ctx,
- 	/* CPM 1.7 uses single pass to treat AEAD as cipher operation */
- 	if (ctx->is_single_pass) {
- 		enqueue_one_cipher_job(ctx, req, iv, ofs, data_len);
--		cipher_param->spc_aad_addr = aad->iova;
--		cipher_param->spc_auth_res_addr = digest->iova;
-+		if (ctx->is_ucs) {
-+			cipher_param20->spc_aad_addr = aad->iova;
-+			cipher_param20->spc_auth_res_addr = digest->iova;
-+		} else {
-+			cipher_param->spc_aad_addr = aad->iova;
-+			cipher_param->spc_auth_res_addr = digest->iova;
-+		}
- 		return;
- 	}
- 
--- 
-2.25.1
-

build/external/patches/dpdk_22.03/0001-bus-vmbus-add-support-allow-block-scan-mode.patch

@@ -1,76 +0,0 @@
-From 16449a64d38c7f4b880601ddf3d34087da5e8577 Mon Sep 17 00:00:00 2001
-From: Xiaoming Jiang <jiangxiaoming@outlook.com>
-Date: Thu, 9 Jun 2022 06:15:51 +0000
-Subject: [PATCH 1/1] bus/vmbus: add support allow/block scan mode
-
----
- drivers/bus/vmbus/vmbus_common.c | 32 +++++++++++++++++++++++++++++---
- 1 file changed, 29 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/bus/vmbus/vmbus_common.c b/drivers/bus/vmbus/vmbus_common.c
-index 3677273..47edacb 100644
---- a/drivers/bus/vmbus/vmbus_common.c
-+++ b/drivers/bus/vmbus/vmbus_common.c
-@@ -102,7 +102,12 @@ vmbus_probe_one_driver(struct rte_vmbus_driver *dr,
- 	VMBUS_LOG(INFO, "VMBUS device %s on NUMA socket %i",
- 		  guid, dev->device.numa_node);
- 
--	/* TODO add block/allow logic */
-+	/* no initialization when marked as blocked, return without error */
-+	if (dev->device.devargs != NULL &&
-+		dev->device.devargs->policy == RTE_DEV_BLOCKED) {
-+		RTE_LOG(INFO, EAL, "  Device is blocked, not initializing\n");
-+		return 1;
-+	}
- 
- 	/* map resources for device */
- 	ret = rte_vmbus_map_device(dev);
-@@ -134,7 +139,7 @@ vmbus_probe_one_driver(struct rte_vmbus_driver *dr,
- 
- /*
-  * If device class GUID matches, call the probe function of
-- * register drivers for the vmbus device.
-+ * registere drivers for the vmbus device.
-  * Return -1 if initialization failed,
-  * and 1 if no driver found for this device.
-  */
-@@ -163,6 +168,25 @@ vmbus_probe_all_drivers(struct rte_vmbus_device *dev)
- 	return 1;
- }
- 
-+static bool
-+rte_vmbus_ignore_device(struct rte_vmbus_device *dev)
-+{
-+	struct rte_devargs *devargs = vmbus_devargs_lookup(dev);
-+
-+	switch (rte_vmbus_bus.bus.conf.scan_mode) {
-+	case RTE_BUS_SCAN_ALLOWLIST:
-+		if (devargs && devargs->policy == RTE_DEV_ALLOWED)
-+			return false;
-+		break;
-+	case RTE_BUS_SCAN_UNDEFINED:
-+	case RTE_BUS_SCAN_BLOCKLIST:
-+		if (devargs == NULL || devargs->policy != RTE_DEV_BLOCKED)
-+			return false;
-+		break;
-+	}
-+	return true;
-+}
-+
- /*
-  * Scan the vmbus, and call the devinit() function for
-  * all registered drivers that have a matching entry in its id_table
-@@ -180,7 +204,9 @@ rte_vmbus_probe(void)
- 
- 		rte_uuid_unparse(dev->device_id, ubuf, sizeof(ubuf));
- 
--		/* TODO: add allowlist/blocklist */
-+		if (rte_vmbus_ignore_device(dev)) {
-+			continue;
-+		}
- 
- 		if (vmbus_probe_all_drivers(dev) < 0) {
- 			VMBUS_LOG(NOTICE,
--- 
-2.32.0
-

build/external/patches/dpdk_22.03/0001-crypto-qat-fix-of-cipher-offset-and-length-assignmen.patch

@@ -1,57 +0,0 @@
-From 013a095d6b348afddceaa5ea710ef6309566dc85 Mon Sep 17 00:00:00 2001
-From: Kai Ji <kai.ji@intel.com>
-Date: Fri, 25 Mar 2022 19:22:07 +0800
-Subject: [PATCH] crypto/qat: fix of cipher offset and length assignment
-
-This patch fix the cipher offset and length values when convert
-mbuf to vector chain for QAT build op.
-
-Fixes: a815a04cea05 ("crypto/qat: support symmetric build op request")
-
-Signed-off-by: Kai Ji <kai.ji@intel.com>
----
- drivers/crypto/qat/dev/qat_crypto_pmd_gens.h | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/drivers/crypto/qat/dev/qat_crypto_pmd_gens.h b/drivers/crypto/qat/dev/qat_crypto_pmd_gens.h
-index 50a9c5ad5b..dc473e0624 100644
---- a/drivers/crypto/qat/dev/qat_crypto_pmd_gens.h
-+++ b/drivers/crypto/qat/dev/qat_crypto_pmd_gens.h
-@@ -395,12 +395,12 @@ qat_sym_convert_op_to_vec_chain(struct rte_crypto_op *op,
- 	ret = qat_cipher_is_len_in_bits(ctx, op);
- 	switch (ret) {
- 	case 1:
--		cipher_len = op->sym->aead.data.length >> 3;
--		cipher_ofs = op->sym->aead.data.offset >> 3;
-+		cipher_len = op->sym->cipher.data.length >> 3;
-+		cipher_ofs = op->sym->cipher.data.offset >> 3;
- 		break;
- 	case 0:
--		cipher_len = op->sym->aead.data.length;
--		cipher_ofs = op->sym->aead.data.offset;
-+		cipher_len = op->sym->cipher.data.length;
-+		cipher_ofs = op->sym->cipher.data.offset;
- 		break;
- 	default:
- 		QAT_DP_LOG(ERR,
-@@ -426,7 +426,6 @@ qat_sym_convert_op_to_vec_chain(struct rte_crypto_op *op,
- 		return -EINVAL;
- 	}
- 
--	min_ofs = cipher_ofs < auth_ofs ? cipher_ofs : auth_ofs;
- 	max_len = RTE_MAX(cipher_ofs + cipher_len, auth_ofs + auth_len);
- 
- 	/* digest in buffer check. Needed only for wireless algos */
-@@ -463,7 +462,8 @@ qat_sym_convert_op_to_vec_chain(struct rte_crypto_op *op,
- 					ctx->digest_length);
- 	}
- 
--	n_src = rte_crypto_mbuf_to_vec(op->sym->m_src, min_ofs, max_len,
-+	/* Passing 0 as cipher & auth offsets are assigned into ofs later */
-+	n_src = rte_crypto_mbuf_to_vec(op->sym->m_src, 0, max_len,
- 			in_sgl->vec, QAT_SYM_SGL_MAX_NUMBER);
- 	if (unlikely(n_src < 0 || n_src > op->sym->m_src->nb_segs)) {
- 		op->status = RTE_CRYPTO_OP_STATUS_ERROR;
--- 
-2.25.1
-