[kle2info] Trim the code in kle2xy (#8955)

* [kle2jinfo] use min/max instead of if

This is a slight change.
Before, the key_skel would keep the invalid value for future keys.
I think this is what was actually intended.

* [kle2info] calculate x

x is the current_x * key_size + (key_size/2)
y is the current_y * key_size + (key_size/2)

no reason to track both

Makefile

@@ -29,6 +29,9 @@ $(info QMK Firmware $(QMK_VERSION))
 endif
 endif
 
+# avoid 'Entering|Leaving directory' messages
+MAKEFLAGS += --no-print-directory
+
 ON_ERROR := error_occurred=1
 
 BREAK_ON_ERRORS = no

docs/_summary.md

@@ -75,6 +75,7 @@
     * [Layers](feature_layers.md)
     * [One Shot Keys](one_shot_keys.md)
     * [Pointing Device](feature_pointing_device.md)
+    * [Raw HID](feature_rawhid.md)
     * [Swap Hands](feature_swap_hands.md)
     * [Tap Dance](feature_tap_dance.md)
     * [Tap-Hold Configuration](tap_hold.md)

docs/config_options.md

@@ -191,7 +191,12 @@ If you define these options you will enable the associated feature, which may in
 * `#define RGBLIGHT_ANIMATIONS`
   * run RGB animations
 * `#define RGBLIGHT_LAYERS`
-  * Lets you define [lighting layers](feature_rgblight.md) that can be toggled on or off. Great for showing the current keyboard layer or caps lock state.
+  * Lets you define [lighting layers](feature_rgblight.md?id=lighting-layers) that can be toggled on or off. Great for showing the current keyboard layer or caps lock state.
+* `#define RGBLIGHT_MAX_LAYERS`
+  * Defaults to 8. Can be expanded up to 32 if more [lighting layers](feature_rgblight.md?id=lighting-layers) are needed.
+  * Note: Increasing the maximum will increase the firmware size and slow sync on split keyboards.
+* `#define RGBLIGHT_LAYER_BLINK` 
+  * Adds ability to [blink](feature_rgblight.md?id=lighting-layer-blink) a lighting layer for a specified number of milliseconds (e.g. to acknowledge an action).
 * `#define RGBLED_NUM 12`
   * number of LEDs
 * `#define RGBLIGHT_SPLIT`

docs/feature_hd44780.md

@@ -1,6 +1,6 @@
 # HD44780 LCD Displays
 
-This is an integration of Peter Fleury's LCD library. This page will explain the basics. [For in depth documentation visit his page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
+This is an integration of Peter Fleury's LCD library. This page will explain the basics. [For in depth documentation visit his page.](http://www.peterfleury.epizy.com/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
 
 You can enable support for HD44780 Displays by setting the `HD44780_ENABLE` flag in your keyboards `rules.mk` to yes.
 
@@ -50,8 +50,8 @@ LCD_DISP_ON_CURSOR_BLINK : display on, cursor on flashing
 ````
 This is best done in your keyboards `matrix_init_kb` or your keymaps `matrix_init_user`.  
 It is advised to clear the display before use.  
-To do so call `lcd_clrsrc()`.
+To do so call `lcd_clrscr()`.
 
 To now print something to your Display you first call `lcd_gotoxy(column, line)`. To go to the start of the first line you would call `lcd_gotoxy(0, 0)` and then print a string with `lcd_puts("example string")`.
 
-There are more methods available to control the display. [For in depth documentation please visit the linked page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
+There are more methods available to control the display. [For in depth documentation please visit the linked page.](http://www.peterfleury.epizy.com/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)

docs/feature_rawhid.md

@@ -0,0 +1,65 @@
+# Raw HID
+
+Raw HID allows for bidirectional communication between QMK and the host computer over an HID interface. This has many potential use cases, such as switching keymaps on the fly or changing RGB LED colors and modes.
+
+There are two main components to getting raw HID working with your keyboard.
+
+## Keyboard firmware
+
+The implementation is fairly straightforward for the firmware.
+In your `rules.mk` add:
+
+```make
+RAW_ENABLE = yes
+```
+
+In your `keymap.c` include `"raw_hid.h"` and implement the following:
+
+```C
+void raw_hid_receive(uint8_t *data, uint8_t length) {
+    // Your code goes here. data is the packet received from host.
+}
+```
+
+The `"raw_hid.h"` header also declares `void raw_hid_send(uint8_t *data, uint8_t length);` which allows sending packets from keyboard to host. As an example, it can also be used for debugging when building your host application by returning all data back to the host.
+
+```C
+void raw_hid_receive(uint8_t *data, uint8_t length) {
+    raw_hid_send(data, length);
+}
+```
+
+`raw_hid_receive` can receive variable size packets from host with maximum length `RAW_EPSIZE`. `raw_hid_send` on the other hand can send packets to host of exactly `RAW_EPSIZE` length, therefore it should be used with data of length `RAW_EPSIZE`.
+
+Make sure to flash raw enabled firmware before proceeding with working on the host side.
+
+## Host (Windows/macOS/Linux)
+
+This is the more complicated part as it will require some digging.
+
+To connect your host computer to your keyboard with raw HID you need four pieces of information about your keyboard:
+
+1. Vendor ID
+2. Product ID
+3. Usage Page
+4. Usage
+
+The first two can easily be found in your keyboard's `config.h` in the keyboard's main directory under `VENDOR_ID` and `PRODUCT_ID`. **Usage Page** is **`0xFF60`** and **Usage** is **`0x0061`**.
+
+### Building your host
+
+You can build your host using any language that has an available HID implementation library if you don't wish to make your own. The ones we know of for popular languages are:
+
+* Node: [node-hid](https://github.com/node-hid/node-hid).
+* C: [hidapi](https://github.com/libusb/hidapi).
+* Java: [purejavahidapi](https://github.com/nyholku/purejavahidapi) and [hid4java](https://github.com/gary-rowe/hid4java).
+* Python: [pyhidapi](https://pypi.org/project/hid/).
+
+This is not an exhaustive cross-platform list but should get you started. There are no special requirements for using raw HID so any HID library should work.
+
+Now that you have all four pieces of information required to open HID interface to your keyboard. All you need to do is use your library's available functions to open the device with its ID parameters.
+
+Note that Vendor ID and Product ID are not actually required to open the device. They are used only to filter to a specific device out of the many HID devices you have plugged in. Many libraries will give you the option to open the device using Product Name or Manufacturer Name instead, `node-hid` being a prime example. This will create issues for devices with builtin USB Hub or any extra HID interfaces where you will have multiple interfaces with the same name or from the same manufacturer. The Vendor ID together with Product ID create a unique designation to a single interface and will not exhibit this problem. Therefore, even if your library doesn't require you to, it is best to use them to avoid issues.
+Unlike Vendor ID and Product ID though, Usage Page and Usage are necessary for successful communication.
+
+It should go without saying that regardless of the library you're using, you should always make sure to close the interface when finished. Depending on the operating system and your particular environment there may be issues connecting to it again afterwards with another client or another instance of the same client if it's not explicitly closed.

docs/feature_rgblight.md

@@ -94,6 +94,7 @@ if `RGBLIGHT_EFFECT_xxxx` or `RGBLIGHT_ANIMATIONS` is defined, you also have a n
 |`RGBLIGHT_MODE_STATIC_GRADIENT`| 0,1,..,9        |Static gradient                        |
 |`RGBLIGHT_MODE_RGB_TEST`     | *None*            |RGB Test                               |
 |`RGBLIGHT_MODE_ALTERNATING`  | *None*            |Alternating                            |
+|`RGBLIGHT_MODE_TWINKLE`      | 0,1,2,3,4,5       |Twinkle                                |
 
 Check out [this video](https://youtube.com/watch?v=VKrpPAHlisY) for a demonstration.
 
@@ -103,8 +104,8 @@ Note: For versions older than 0.6.117, The mode numbers were written directly. I
 
 Use these defines to add or remove animations from the firmware. When you are running low on flash space, it can be helpful to disable animations you are not using.
 
-|Define                              |Default      |Description                                                                          |
-|------------------------------------|-------------|-------------------------------------------------------------------------------------|
+|Define                              |Default      |Description                                                              |
+|------------------------------------|-------------|-------------------------------------------------------------------------|
 |`RGBLIGHT_ANIMATIONS`               |*Not defined*|Enable all additional animation modes.                                   |
 |`RGBLIGHT_EFFECT_ALTERNATING`       |*Not defined*|Enable alternating animation mode.                                       |
 |`RGBLIGHT_EFFECT_BREATHING`         |*Not defined*|Enable breathing animation mode.                                         |
@@ -115,6 +116,7 @@ Use these defines to add or remove animations from the firmware. When you are ru
 |`RGBLIGHT_EFFECT_RGB_TEST`          |*Not defined*|Enable RGB test animation mode.                                          |
 |`RGBLIGHT_EFFECT_SNAKE`             |*Not defined*|Enable snake animation mode.                                             |
 |`RGBLIGHT_EFFECT_STATIC_GRADIENT`   |*Not defined*|Enable static gradient mode.                                             |
+|`RGBLIGHT_EFFECT_TWINKLE`           |*Not defined*|Enable twinkle animation mode.                                           |
 
 ### Effect and Animation Settings
 
@@ -131,6 +133,8 @@ The following options are used to tweak the various animations:
 |`RGBLIGHT_EFFECT_KNIGHT_OFFSET`     |`0`          |The number of LEDs to start the "Knight" animation from the start of the strip by    |
 |`RGBLIGHT_RAINBOW_SWIRL_RANGE`      |`255`        |Range adjustment for the rainbow swirl effect to get different swirls                |
 |`RGBLIGHT_EFFECT_SNAKE_LENGTH`      |`4`          |The number of LEDs to light up for the "Snake" animation                             |
+|`RGBLIGHT_EFFECT_TWINKLE_LIFE`      |`75`         |Adjusts how quickly each LED brightens and dims when twinkling (in animation steps)  |
+|`RGBLIGHT_EFFECT_TWINKLE_PROBABILITY`|`1/127`     |Adjusts how likely each LED is to twinkle (on each animation step)                   |
 
 ### Example Usage to Reduce Memory Footprint
   1. Remove `RGBLIGHT_ANIMATIONS` from `config.h`.
@@ -168,6 +172,9 @@ const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
 // How long (in milliseconds) to wait between animation steps for each of the "Knight" animations
 const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31};
 
+// How long (in milliseconds) to wait between animation steps for each of the "Twinkle" animations
+const uint8_t RGBLED_TWINKLE_INTERVALS[] PROGMEM = {50, 25, 10};
+
 // These control which hues are selected for each of the "Static gradient" modes
 const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64};
 ```
@@ -177,6 +184,10 @@ const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64};
 By including `#define RGBLIGHT_LAYERS` in your `config.h` file you can enable lighting layers. These make
 it easy to use your underglow LEDs as status indicators to show which keyboard layer is currently active, or the state of caps lock, all without disrupting any animations. [Here's a video](https://youtu.be/uLGE1epbmdY) showing an example of what you can do.
 
+### Defining Lighting Layers :id=defining-lighting-layers
+
+By default, 8 layers are possible. This can be expanded to as many as 32 by overriding the definition of `RGBLIGHT_MAX_LAYERS` in `config.h` (e.g. `#define RGBLIGHT_MAX_LAYERS 32`). Please note, if you use a split keyboard, you will need to flash both sides of the split after changing this. Also, increasing the maximum will increase the firmware size, and will slow sync on split keyboards.
+
 To define a layer, we modify `keymap.c` to list out LED ranges and the colors we want to overlay on them using an array of `rgblight_segment_t` using the `RGBLIGHT_LAYER_SEGMENTS` macro. We can define multiple layers and enable/disable them independently:
 
 ```c
@@ -211,8 +222,12 @@ void keyboard_post_init_user(void) {
     rgblight_layers = my_rgb_layers;
 }
 ```
+Note: For split keyboards with two controllers, both sides need to be flashed when updating the contents of rgblight_layers.
 
-Finally, we enable and disable the lighting layers whenever the state of the keyboard changes:
+### Enabling and disabling lighting layers :id=enabling-lighting-layers
+
+Everything above just configured the definition of each lighting layer.
+We can now enable and disable the lighting layers whenever the state of the keyboard changes:
 
 ```c
 layer_state_t layer_state_set_user(layer_state_t state) {
@@ -228,7 +243,40 @@ bool led_update_user(led_t led_state) {
 }
 ```
 
-Note: For split keyboards with two controllers, both sides need to be flashed when updating the contents of rgblight_layers.
+### Lighting layer blink :id=lighting-layer-blink
+
+By including `#define RGBLIGHT_LAYER_BLINK` in your `config.h` file you can turn a lighting
+layer on for a specified duration. Once the specified number of milliseconds has elapsed
+the layer will be turned off. This is useful, e.g., if you want to acknowledge some
+action (e.g. toggling some setting):
+
+```c
+const rgblight_segment_t PROGMEM _yes_layer[] = RGBLIGHT_LAYER_SEGMENTS( {9, 6, HSV_GREEN} );
+const rgblight_segment_t PROGMEM _no_layer[] = RGBLIGHT_LAYER_SEGMENTS( {9, 6, HSV_RED} );
+
+const rgblight_segment_t* const PROGMEM _rgb_layers[] =
+    RGBLIGHT_LAYERS_LIST( _yes_layer, _no_layer );
+
+void keyboard_post_init_user(void) {
+    rgblight_layers = _rgb_layers;
+}
+
+// Note we user post_process_record_user because we want the state
+// after the flag has been flipped...
+void post_process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case DEBUG:
+            rgblight_blink_layer(debug_enable ? 0 : 1, 500);
+            break;
+
+        case NK_TOGG:
+        case NK_ON:
+        case NK_OFF:
+            rgblight_blink_layer(keymap_config.nkro ? 0 : 1, 500);
+            break;
+    }
+}
+```
 
 ## Functions
 

docs/feature_swap_hands.md

@@ -28,3 +28,4 @@ Note that the array indices are reversed same as the matrix and the values are o
 |`SH_MOFF`  |Momentarily turns off swap.                                              |
 |`SH_TG`    |Toggles swap on and off with every key press.                            |
 |`SH_TT`    |Toggles with a tap; momentary when held.                                 |
+|`SH_OS`    |One shot swap hands: toggles while pressed or until next key press.      |

docs/index.html

@@ -32,7 +32,7 @@
 
         // Moved pages
         '/adding_a_keyboard_to_qmk': '/hardware_keyboard_guidelines',
-        '/build_environment_setup': '/getting_started_build_tools',
+        '/build_environment_setup': '/newbs_getting_started',
         '/cli_dev_configuration': '/cli_configuration',
         '/dynamic_macros': '/feature_dynamic_macros',
         '/feature_common_shortcuts': '/feature_advanced_keycodes',
@@ -45,6 +45,7 @@
         '/tap_dance': '/feature_tap_dance',
         '/unicode': '/feature_unicode',
         '/python_development': '/cli_development',
+        '/getting_started_build_tools':'/newbs_getting_started',
       },
       basePath: '/',
       name: 'QMK Firmware',

docs/internals_gpio_control.md

@@ -16,6 +16,7 @@ The following functions can provide basic control of GPIOs and are found in `qua
 | `writePinLow(pin)`     | Set pin level as low, assuming it is an output   | `PORTB &= ~(1<<2)`                              | `palClearLine(pin)`                             |
 | `writePin(pin, level)` | Set pin level, assuming it is an output          | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` |
 | `readPin(pin)`         | Returns the level of the pin                     | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)`           | `palReadLine(pin)`                              |
+| `togglePin(pin)`       | Invert pin level, assuming it is an output       | `PORTB ^= (1<<2)`                               | `palToggleLine(pin)`                            |
 
 ## Advanced Settings :id=advanced-settings
 

docs/isp_flashing_guide.md

@@ -115,12 +115,18 @@ The simplest and quickest way to get things back to normal is to flash only a bo
 
 You can find the stock bootloaders in the [`util/` folder](https://github.com/qmk/qmk_firmware/tree/master/util). Be sure to flash the correct bootloader for your chip:
 
-* [`atmega32u4`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1_0_0.hex) - Most keyboards, Planck Rev 1-5, Preonic Rev 1-2
-* [`Pro Micro`](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro16.hex) - The default bootloader for Pro Micro controllers
-* [`at90usb1286`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128x_1_0_1.hex) - Planck Light Rev 1
-* [`atmega32a`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32a_1_0_0.hex) - jj40, and other V-USB/ps2avrGB keyboards
+* **Atmel DFU**
+  * [ATmega16U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega16u4_1.0.1.hex)
+  * [ATmega32U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1.0.0.hex)
+  * [AT90USB64](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb64_1.0.0.hex)
+  * [AT90USB128](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128_1.0.1.hex)
+* **Caterina**
+  * [Pro Micro (5V/16MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro16.hex)
+  * [Pro Micro (3.3V/8MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro8.hex)
+* **BootloadHID (PS2AVRGB)**
+  * [ATmega32A](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_ps2avrgb_bootloadhid_1.0.1.hex)
 
-If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU =` line will have the value you need. It may differ between different versions of the board.
+If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU` and `BOOTLOADER` lines will have the value you need. It may differ between different versions of the board.
 
 ### Production Techniques
 

docs/ja/feature_haptic_feedback.md

@@ -0,0 +1,163 @@
+# 触覚フィードバック
+
+<!---
+  original document: 0.8.123:docs/feature_haptic_feedback.md
+  git diff 0.8.123 HEAD -- docs/feature_haptic_feedback.md | cat
+-->
+
+## 触覚フィードバック の rules.mk オプション
+
+現在のところ、`rules.mk` で触覚フィードバック用に以下のオプションを利用可能です:
+
+`HAPTIC_ENABLE += DRV2605L`
+
+`HAPTIC_ENABLE += SOLENOID`
+
+## サポートされる既知のハードウェア
+
+| 名前 | 説明 |
+|--------------------|-------------------------------------------------|
+| [LV061228B-L65-A](https://www.digikey.com/product-detail/en/jinlong-machinery-electronics-inc/LV061228B-L65-A/1670-1050-ND/7732325) | z-axis 2v LRA |
+| [Mini Motor Disc](https://www.adafruit.com/product/1201) | small 2-5v ERM |
+
+## 触覚キーコード
+
+以下のキーコードは、選択した触覚メカニズムに依存して動作するかどうか決まります。
+
+| 名前 | 説明 |
+|-----------|-------------------------------------------------------|
+| `HPT_ON` | 触覚フィードバックをオン |
+| `HPT_OFF` | 触覚フィードバックをオフ |
+| `HPT_TOG` | 触覚フィードバックのオン/オフを切り替え |
+| `HPT_RST` | 触覚フィードバック設定をデフォルトに戻す |
+| `HPT_FBK` | キー押下またはリリースまたはその両方でフィードバックを切り替え |
+| `HPT_BUZ` | ソレノイドの振動のオン/オフを切り替え |
+| `HPT_MODI` | 次の DRV2605L 波形に移動 |
+| `HPT_MODD` | 前の DRV2605L 波形に移動 |
+| `HPT_CONT` | 連続触覚モードのオン/オフを切り替え |
+| `HPT_CONI` | DRV2605L の連続触覚強度を増加 |
+| `HPT_COND` | DRV2605L の連続触覚強度を減少 |
+| `HPT_DWLI` | ソレノイドの滞留時間を増加 |
+| `HPT_DWLD` | ソレノイドの滞留時間を減少 |
+
+### ソレノイド
+
+ほとんどの MCU はソレノイドのコイルを駆動するために必要な電流を供給できないため、最初に MOSFET を介してソレノイドを駆動する回路を構築する必要があります。
+
+[Adafruit が提供する配線図](https://playground.arduino.cc/uploads/Learning/solenoid_driver.pdf)
+
+
+| 設定 | デフォルト | 説明 |
+|--------------------------|---------------|-------------------------------------------------------|
+| `SOLENOID_PIN` | *定義なし* | ソレノイドが接続されているピンを設定する。 |
+| `SOLENOID_DEFAULT_DWELL` | `12` ms | ソレノイドのデフォルトの滞留時間を設定する。 |
+| `SOLENOID_MIN_DWELL` | `4` ms | 滞留時間の下限を設定する。 |
+| `SOLENOID_MAX_DWELL` | `100` ms | 滞留時間の上限を設定する。 |
+
+?> 滞留時間とは、「プランジャー」が作動したままになる時間です。滞留時間により、ソレノイドの音が変わります。
+
+ブートローダ実行中に一部のピンが給電されているかもしれず (例えば、STM32F303 チップ上の A13)、そうすると書き込みプロセスの間ずっとソレノイドがオン状態になることに注意してください。これはソレノイドを加熱し損傷を与えるかもしれません。ソレノイドが接続されているピンがブートローダ/DFU 実行中にソレノイドをオンにしていることが分かった場合は、他のピンを選択してください。
+
+### DRV2605L
+
+DRV2605Lは i2c プロトコルで制御され、SDA および SCL ピンに接続する必要があります。これらは使用する MCU によって異なります。
+
+#### フィードバックモータのセットアップ
+
+このドライバは2つの異なるフィードバックモータをサポートします。選択したモータに基づいて、`config.h` で以下を設定します。
+
+##### ERM
+
+偏心回転質量振動モータ (ERM) は偏りのある重りが取り付けられたモータで、駆動信号が取り付けられると偏りのある重りが回転し、正弦波が振動に変換されます。
+
+```
+#define FB_ERM_LRA 0
+#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+
+/* 特定のモータに最適な設定については、データシートを参照してください。*/
+#define RATED_VOLTAGE 3
+#define V_PEAK 5
+```
+##### LRA
+
+線形共振アクチュエータ (LRA、線形バイブレータとしても知られています)は、ERM と異なります。LRA は重りと磁石をバネで吊るしたものとボイスコイルで構成されています。駆動信号が印加されるとされると、重りは単一の軸で振動します (左右または上下)。重りはバネに取り付けられているため、特定の周波数で共振効果があります。この周波数は LRA が最も効率的に動作する箇所です。この周波数の推奨範囲については、モータのデータシートを参照してください。
+
+```
+#define FB_ERM_LRA 1
+#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+
+/* 特定のモータに最適な設定については、データシートを参照してください。*/
+#define RATED_VOLTAGE 2
+#define V_PEAK 2.8
+#define V_RMS 2.0 
+#define V_PEAK 2.1
+#define F_LRA 205 /* 共振周波数 */
+```
+
+#### DRV2605L 波形ライブラリ
+
+DRV2605L には呼び出して再生できる様々な波形シーケンスのプリロードライブラリが同梱されています。マクロを書く場合、これらの波形は `DRV_pulse(*sequence name or number*)` を使って再生することができます
+
+データシートの波形シーケンスのリスト
+
+| seq# | シーケンス名 | seq# | シーケンス名 | seq# | シーケンス名 |
+|-----|---------------------|-----|-----------------------------------|-----|--------------------------------------|
+| 1 | strong_click | 43 | lg_dblclick_med_60 | 85 | transition_rampup_med_smooth2 |
+| 2 | strong_click_60 | 44 | lg_dblsharp_tick | 86 | transition_rampup_short_smooth1 |
+| 3 | strong_click_30 | 45 | lg_dblsharp_tick_80 | 87 | transition_rampup_short_smooth2 |
+| 4 | sharp_click | 46 | lg_dblsharp_tick_60 | 88 | transition_rampup_long_sharp1 |
+| 5 | sharp_click_60 | 47 | buzz | 89 | transition_rampup_long_sharp2 |
+| 6 | sharp_click_30 | 48 | buzz_80 | 90 | transition_rampup_med_sharp1 |
+| 7 | soft_bump | 49 | buzz_60 | 91 | transition_rampup_med_sharp2 |
+| 8 | soft_bump_60 | 50 | buzz_40 | 92 | transition_rampup_short_sharp1 |
+| 9 | soft_bump_30 | 51 | buzz_20 | 93 | transition_rampup_short_sharp2 |
+| 10 | dbl_click | 52 | pulsing_strong | 94 | transition_rampdown_long_smooth1_50 |
+| 11 | dbl_click_60 | 53 | pulsing_strong_80 | 95 | transition_rampdown_long_smooth2_50 |
+| 12 | trp_click | 54 | pulsing_medium | 96 | transition_rampdown_med_smooth1_50 |
+| 13 | soft_fuzz | 55 | pulsing_medium_80 | 97 | transition_rampdown_med_smooth2_50 |
+| 14 | strong_buzz | 56 | pulsing_sharp | 98 | transition_rampdown_short_smooth1_50 |
+| 15 | alert_750ms | 57 | pulsing_sharp_80 | 99 | transition_rampdown_short_smooth2_50 |
+| 16 | alert_1000ms | 58 | transition_click | 100 | transition_rampdown_long_sharp1_50 |
+| 17 | strong_click1 | 59 | transition_click_80 | 101 | transition_rampdown_long_sharp2_50 |
+| 18 | strong_click2_80 | 60 | transition_click_60 | 102 | transition_rampdown_med_sharp1_50 |
+| 19 | strong_click3_60 | 61 | transition_click_40 | 103 | transition_rampdown_med_sharp2_50 |
+| 20 | strong_click4_30 | 62 | transition_click_20 | 104 | transition_rampdown_short_sharp1_50 |
+| 21 | medium_click1 | 63 | transition_click_10 | 105 | transition_rampdown_short_sharp2_50 |
+| 22 | medium_click2_80 | 64 | transition_hum | 106 | transition_rampup_long_smooth1_50 |
+| 23 | medium_click3_60 | 65 | transition_hum_80 | 107 | transition_rampup_long_smooth2_50 |
+| 24 | sharp_tick1 | 66 | transition_hum_60 | 108 | transition_rampup_med_smooth1_50 |
+| 25 | sharp_tick2_80 | 67 | transition_hum_40 | 109 | transition_rampup_med_smooth2_50 |
+| 26 | sharp_tick3_60 | 68 | transition_hum_20 | 110 | transition_rampup_short_smooth1_50 |
+| 27 | sh_dblclick_str | 69 | transition_hum_10 | 111 | transition_rampup_short_smooth2_50 |
+| 28 | sh_dblclick_str_80 | 70 | transition_rampdown_long_smooth1 | 112 | transition_rampup_long_sharp1_50 |
+| 29 | sh_dblclick_str_60 | 71 | transition_rampdown_long_smooth2 | 113 | transition_rampup_long_sharp2_50 |
+| 30 | sh_dblclick_str_30 | 72 | transition_rampdown_med_smooth1 | 114 | transition_rampup_med_sharp1_50 |
+| 31 | sh_dblclick_med | 73 | transition_rampdown_med_smooth2 | 115 | transition_rampup_med_sharp2_50 |
+| 32 | sh_dblclick_med_80 | 74 | transition_rampdown_short_smooth1 | 116 | transition_rampup_short_sharp1_50 |
+| 33 | sh_dblclick_med_60 | 75 | transition_rampdown_short_smooth2 | 117 | transition_rampup_short_sharp2_50 |
+| 34 | sh_dblsharp_tick | 76 | transition_rampdown_long_sharp1 | 118 | long_buzz_for_programmatic_stopping |
+| 35 | sh_dblsharp_tick_80 | 77 | transition_rampdown_long_sharp2 | 119 | smooth_hum1_50 |
+| 36 | sh_dblsharp_tick_60 | 78 | transition_rampdown_med_sharp1 | 120 | smooth_hum2_40 |
+| 37 | lg_dblclick_str | 79 | transition_rampdown_med_sharp2 | 121 | smooth_hum3_30 |
+| 38 | lg_dblclick_str_80 | 80 | transition_rampdown_short_sharp1 | 122 | smooth_hum4_20 |
+| 39 | lg_dblclick_str_60 | 81 | transition_rampdown_short_sharp2 | 123 | smooth_hum5_10 |
+| 40 | lg_dblclick_str_30 | 82 | transition_rampup_long_smooth1 |  |  |
+| 41 | lg_dblclick_med | 83 | transition_rampup_long_smooth2 |  |  |
+| 42 | lg_dblclick_med_80 | 84 | transition_rampup_med_smooth1 |  |  |
+### オプションの DRV2605L の定義
+
+```
+#define DRV_GREETING *sequence name or number*
+```
+触覚フィードバッグが有効な場合、キーボード起動時に特定のシーケンスに合わせて振動します。以下の定義を使って選択することができます:
+
+```
+#define DRV_MODE_DEFAULT *sequence name or number*
+```
+これにより HPT_RST がアクティブモードとして設定するシーケンスを設定します。未定義の場合、HPT_RST が押された時にモードが 1 に設定されます。
+
+### DRV2605L 連続触覚モード
+
+このモードは強さを増減するオプションを使って連続触覚フィードバッグを設定します。

docs/ja/feature_hd44780.md

@@ -55,7 +55,7 @@ LCD_DISP_ON_CURSOR_BLINK : ディスプレイオン、点滅カーソル
 ````
 これはキーボードの `matrix_init_kb` またはキーマップの `matrix_init_user` で行うのが最適です。
 使用前にディスプレイをクリアすることをお勧めします。
-そのためには、`lcd_clrsrc()` を呼びます。
+そのためには、`lcd_clrscr()` を呼びます。
 
 ディスプレイに何かを表示するには、最初に `lcd_gotoxy(column, line)` を呼びます。最初の行の先頭に移動するには、`lcd_gotoxy(0, 0)` を呼び出し、その後 `lcd_puts("example string")` を使って文字列を出力します。
 

docs/ja/feature_key_lock.md

@@ -0,0 +1,27 @@
+# キーロック
+
+<!---
+  original document: 0.8.134:docs/feature_key_lock.md
+  git diff 0.8.134 HEAD -- docs/feature_key_lock.md | cat
+-->
+
+特定のキーを長時間押すことが必要になる場合があります。キーロックは次に押すキーを押したままにします。もう一度押すと、リリースされます。
+
+いくつかの文を全て大文字で入力する必要があるとしましょう。`KC_LOCK` を押し、次にシフトを押します。これで、シフトは次にタップするまで押していると見なされます。キーロックを Caps Lock と考えることができますが、さらに強力です。
+
+## 使用法
+
+最初に `rules.mk` で `KEY_LOCK_ENABLE = yes` を設定することでキーロックを有効にします。次に、キーマップでキーを選択し、それをキーコード `KC_LOCK` に割り当てます。
+
+## キーコード
+
+| キーコード | 説明 |
+|---------|--------------------------------------------------------------|
+| `KC_LOCK` | キーが再び押されるまで次のキーを押したままにします。 |
+
+## 注意事項
+
+キーロックは、標準アクションキーと[ワンショットモディファイア](ja/one_shot_keys.md)キー (例えば、Shift を `OSM(KC_LSFT)` と定義した場合)のみを押し続けることができます。
+これは、QMK の特殊機能(ワンショットモディファイアを除く)、または `KC_LPRN` のような shift を押されたキーのバージョンは含みません。[基本的なキーコード](ja/keycodes_basic.md)リストにある場合、押したままにすることができます。
+
+レイヤーの切り替えは、キーロックを解除しません。

docs/keycodes.md

@@ -531,6 +531,7 @@ See also: [Swap Hands](feature_swap_hands.md)
 |`SH_MOFF`  |Momentarily turns off swap.                                              |
 |`SH_TG`    |Toggles swap on and off with every key press.                            |
 |`SH_TT`    |Toggles with a tap; momentary when held.                                 |
+|`SH_OS`    |One shot swap hands: toggle while pressed or until next key press.       |
 
 ## Unicode Support :id=unicode-support
 

doxygen-todo

@@ -1,5 +1,4 @@
 tmk_core/protocol
-tmk_core/protocol/bluefruit
 tmk_core/protocol/chibios
 tmk_core/protocol/iwrap
 tmk_core/protocol/lufa

drivers/avr/apa102.c

@@ -30,8 +30,8 @@
 void inline apa102_setleds(LED_TYPE *ledarray, uint16_t leds) { apa102_setleds_pin(ledarray, leds, _BV(RGB_DI_PIN & 0xF), _BV(RGB_CLK_PIN & 0xF)); }
 
 void static inline apa102_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask_DI, uint8_t pinmask_CLK) {
-    pinMode(RGB_DI_PIN, PinDirectionOutput);
-    pinMode(RGB_CLK_PIN, PinDirectionOutput);
+    setPinOutput(RGB_DI_PIN);
+    setPinOutput(RGB_CLK_PIN);
 
     apa102_send_array((uint8_t *)ledarray, leds)
 }
@@ -90,7 +90,7 @@ void apa102_end_frame(uint16_t leds) {
 void apa102_send_byte(uint8_t byte) {
     uint8_t i;
     for (i = 0; i < 8; i++) {
-    digitalWrite(RGB_DI_PIN, !!(byte & (1 << (7-i)));
-    digitalWrite(RGB_CLK_PIN, PinLevelHigh);
+        writePin(RGB_DI_PIN, !!(byte & (1 << (7 - i))));
+        writePinHigh(RGB_CLK_PIN);
     }
 }

drivers/avr/ssd1306.h

@@ -3,7 +3,6 @@
 
 #include <stdbool.h>
 #include <stdio.h>
-#include "pincontrol.h"
 #include "config.h"
 
 enum ssd1306_cmds {

drivers/oled/oled_driver.c

@@ -479,7 +479,7 @@ void oled_write_ln_P(const char *data, bool invert) {
 void oled_write_raw_P(const char *data, uint16_t size) {
     if (size > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE;
     for (uint16_t i = 0; i < size; i++) {
-        uint8_t c = pgm_read_byte(++data);
+        uint8_t c = pgm_read_byte(data++);
         if (oled_buffer[i] == c) continue;
         oled_buffer[i] = c;
         oled_dirty |= (1 << (i / OLED_BLOCK_SIZE));

keyboards/1upkeyboards/super16/keymaps/nblyumberg/config.h

@@ -0,0 +1,13 @@
+#pragma once
+
+// Time out one shot layers after 3 seconds
+#define ONESHOT_TIMEOUT 3000
+
+#define RGBLED_NUM 16
+
+
+// Undef and redefine default brightness to half of 255
+#undef RGBLIGHT_LIMIT_VAL
+#define RGBLIGHT_LIMIT_VAL 128
+
+#define TAPPING_TERM 200

keyboards/1upkeyboards/super16/keymaps/nblyumberg/keymap.c

@@ -0,0 +1,127 @@
+#include QMK_KEYBOARD_H
+
+uint16_t copy_paste_timer;
+uint16_t enter_timer;
+
+extern rgblight_config_t rgblight_config;
+
+// Define custom keycodes
+enum my_keycodes {
+	KC_CCCV = SAFE_RANGE,
+	KC_2ENTER
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+        //Layer 0 - Base Layer (F13 to F24, and One Shot Layer 1,2,3,4)
+        [0] = LAYOUT_ortho_4x4(
+                KC_F13, KC_F14, KC_F15, KC_F16,
+                KC_F17, KC_CCCV, KC_F19, KC_F20,
+                KC_F21, KC_F22, KC_F23, KC_2ENTER,
+                OSL(1), OSL(2), OSL(3), TG(4)    //Transparent to let you go between layers
+		),
+
+        [1] = LAYOUT_ortho_4x4(
+                LALT(KC_F13), LALT(KC_F14), LALT(KC_F15), LALT(KC_F16),
+                LALT(KC_F17), LALT(KC_F18), LALT(KC_F19), LALT(KC_F20),
+                LALT(KC_F21), LALT(KC_F22), LALT(KC_F23), LALT(KC_F24),
+                KC_TRNS,      KC_TRNS,      KC_TRNS,      KC_TRNS         //Transparent to let you go between layers
+        ),
+
+        //Layer 2 - Shift + Function Key Layer
+        [2] = LAYOUT_ortho_4x4(
+                LSFT(KC_F13), LSFT(KC_F14), LSFT(KC_F15), LSFT(KC_F16),
+                LSFT(KC_F17), LSFT(KC_F18), LSFT(KC_F19), LSFT(KC_F20),
+                LSFT(KC_F21), LSFT(KC_F22), LSFT(KC_F23), LSFT(KC_F24),
+                KC_TRNS,      KC_TRNS,      KC_TRNS,      KC_TRNS         //Transparent to let you go between layers
+        ),
+
+        //Layer 3 - Control + Function Key
+        [3] = LAYOUT_ortho_4x4(
+                LCTL(KC_F13), LCTL(KC_F14), LCTL(KC_F15), LCTL(KC_F16),
+                LCTL(KC_F17), LCTL(KC_F18), LCTL(KC_F19), LCTL(KC_F20),
+                LCTL(KC_F21), LCTL(KC_F22), LCTL(KC_F23), LCTL(KC_F24),
+                KC_TRNS,      KC_TRNS,      KC_TRNS,      KC_TRNS         //Transparent to let you go between layers
+        ),
+
+        //Layer 4 - Keyboard Lights. Programming and Special Functions
+        [4] = LAYOUT_ortho_4x4(
+                KC_MPRV, KC_MPLY, KC_MNXT,   KC_VOLU,
+                RGB_TOG, RGB_MOD, RGB_RMOD,  KC_MUTE,
+                TO(0),   RESET,   EEP_RST, KC_VOLD,
+                KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS         //Transparent to let you go between layers
+        ),
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case KC_CCCV:  // One key copy/paste
+            if (record->event.pressed) {
+                copy_paste_timer = timer_read();
+            } else {
+                if (timer_elapsed(copy_paste_timer) > TAPPING_TERM) {  // Hold, copy
+                    tap_code16(LCTL(KC_C));
+                } else {  // Tap, paste
+                    tap_code16(LCTL(KC_V));
+                }
+            } return true;
+		case KC_2ENTER:
+		    if (record->event.pressed) {
+                enter_timer = timer_read();
+            } else {
+                if (timer_elapsed(enter_timer) > TAPPING_TERM) {  // Hold, shift+enter
+                    tap_code16(LSFT(KC_ENTER));
+                } else {  // Tap, enter
+                    tap_code16(KC_F24);
+                }
+            } 
+			return true;
+        default:
+            return true;
+    }
+}
+
+
+void keyboard_post_init_user(void) {
+	//Enable the LED layers
+	layer_state_set_user(layer_state);
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  rgblight_sethsv_noeeprom(HSV_WHITE);
+  switch(get_highest_layer(state)) {
+  case 1:
+    // Green
+    rgblight_enable_noeeprom();
+    rgblight_sethsv_noeeprom(HSV_GREEN);
+    break;
+  case 2:
+    // Red
+    rgblight_enable_noeeprom();	
+    rgblight_sethsv_noeeprom(HSV_RED);
+    break;
+  case 3:
+    // Blue
+    rgblight_enable_noeeprom();
+    rgblight_sethsv_noeeprom(HSV_BLUE);
+    break;
+  case 4:
+    // Orange
+    rgblight_enable_noeeprom();
+//    rgblight_sethsv_noeeprom(HSV_PURPLE);
+    rgblight_sethsv_noeeprom(HSV_ORANGE);
+    break;
+  default:
+    // White
+    //Read RGB Light State
+    rgblight_config.raw = eeconfig_read_rgblight();
+    //If enabled, set white
+    if (rgblight_config.enable) {
+		rgblight_sethsv_noeeprom(HSV_WHITE);
+	} else { //Otherwise go back to disabled
+		rgblight_disable_noeeprom();
+	}
+    break;
+}
+return state;
+}

keyboards/1upkeyboards/super16/keymaps/nblyumberg/readme.md

@@ -0,0 +1,6 @@
+# Nick B's Super16 keymap
+
+A modification of the default keymap to include layer indicators with RGB
+* Added a time out of 3 seconds to 1 shot layers
+* Reduced brightness to half to reduce power draw
+* Added a one key copy/paste keycode  

keyboards/1upkeyboards/super16/keymaps/nblyumberg/rules.mk

@@ -0,0 +1,2 @@
+RGB_MATRIX_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/40percentclub/nano/keymaps/drashna/keymap.c

@@ -1,7 +1,6 @@
 #include "drashna.h"
 #include "analog.h"
 #include "pointing_device.h"
-#include "pincontrol.h"
 
 #define KC_X0 LT(_FN, KC_ESC)
 

keyboards/acheron/elongate/config.h

@@ -0,0 +1,250 @@
+/*
+Copyright 2020 Gondolindrim
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4150 //AP for AcheronProject
+#define PRODUCT_ID 0x454C // EL for Elongate
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Acheron Project
+#define PRODUCT Elongate
+#define DESCRIPTION Acheron Project Elongate
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 13
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D3, B7, D5, B5, D6 }
+#define MATRIX_COL_PINS { F5, F6, F4, F1, F0, B2, B1, C6, B0, B3, E6, D4, B4}
+//#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN D7
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 16
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//  #define RGBLIGHT_EFFECT_BREATHING
+//  #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//  #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//  #define RGBLIGHT_EFFECT_SNAKE
+//  #define RGBLIGHT_EFFECT_KNIGHT
+//  #define RGBLIGHT_EFFECT_CHRISTMAS
+//  #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//  #define RGBLIGHT_EFFECT_RGB_TEST
+//  #define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+  /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+  #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+  /*==== use exp() and sin() ====*/
+//  #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//  #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/acheron/elongate/elongate.c

@@ -0,0 +1,26 @@
+/* Copyright 2020 Gondolindrim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "elongate.h"
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res) {
+        writePin(D2, led_state.num_lock);
+        writePin(D1, led_state.caps_lock);
+        writePin(D0, led_state.scroll_lock);
+    }
+    return res;
+}

keyboards/acheron/elongate/elongate.h

@@ -0,0 +1,44 @@
+/* Copyright 2020 Gondolindrim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the Keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define KNO KC_NO
+
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K49, K41, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,      K1B, K1C, K4A, K42, \
+    K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K4B, K44, \
+    K30, K31, K32,      K34,           K37,      K3A, K3B, K3C, K3D, K4C, K47  \
+)\
+{\
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KNO, K1B, K1C }, \
+    { K20, KNO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \
+    { K30, K31, K32, KNO, K34, KNO, KNO, K37, KNO, K3A, K3B, K3C, K3D }, \
+    { KNO, K41, K42, KNO, K44, KNO, KNO, K47, KNO, K49, K4A, K4B, K4C }  \
+}

keyboards/acheron/elongate/info.json

@@ -0,0 +1,70 @@
+{
+    "keyboard_name": "Elongate",
+    "url": "http://gondolindrim.github.io/AcheronDocs/elongate/introduction.html",
+    "maintainer": "Gondolindrim",
+    "width": 15.5,
+    "height": 4.25,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"Tab", "x":0, "y":0},
+                {"label":"Q", "x":1, "y":0},
+                {"label":"W", "x":2, "y":0},
+                {"label":"E", "x":3, "y":0},
+                {"label":"R", "x":4, "y":0},
+                {"label":"T", "x":5, "y":0},
+                {"label":"Y", "x":6, "y":0},
+                {"label":"U", "x":7, "y":0},
+                {"label":"I", "x":8, "y":0},
+                {"label":"O", "x":9, "y":0},
+                {"label":"P", "x":10, "y":0},
+                {"label":"Backspace", "x":11, "y":0},
+                {"label":"7", "x":12.5, "y":0},
+                {"label":"8", "x":13.5, "y":0},
+                {"label":"9", "x":14.5, "y":0},
+
+                {"label":"Caps Lock", "x":0, "y":1, "w":1.25},
+                {"label":"A", "x":1.25, "y":1},
+                {"label":"S", "x":2.25, "y":1},
+                {"label":"D", "x":3.25, "y":1},
+                {"label":"F", "x":4.25, "y":1},
+                {"label":"G", "x":5.25, "y":1},
+                {"label":"H", "x":6.25, "y":1},
+                {"label":"J", "x":7.25, "y":1},
+                {"label":"K", "x":8.25, "y":1},
+                {"label":"L", "x":9.25, "y":1},
+                {"label":"Enter", "x":10.25, "y":1.75},
+                {"label":"4", "x":12.5, "y":1},
+                {"label":"5", "x":13.5, "y":1},
+                {"label":"6", "x":14.5, "y":1},
+                
+                {"label":"Shift", "x":0, "y":2, "w":1.75},
+                {"label":"Z", "x":1.75, "y":2},
+                {"label":"X", "x":2.75, "y":2},
+                {"label":"C", "x":3.75, "y":2},
+                {"label":"V", "x":4.75, "y":2},
+                {"label":"B", "x":5.75, "y":2},
+                {"label":"N", "x":6.75, "y":2},
+                {"label":"M", "x":7.75, "y":2},
+                {"label":"<", "x":8.75, "y":2},
+                {"label":"Fn1", "x":9.75, "y":2},
+                {"label":"Up", "x":11.25, "y":2.25},
+                {"label":"1", "x":12.5, "y":2},
+                {"label":"2", "x":13.5, "y":2},
+                {"label":"3", "x":14.5, "y":2},
+                
+                {"label":"Ctrl", "x":0, "y":3, "w":1.25},
+                {"label":"Win", "x":1.25, "y":3},
+                {"label":"Alt", "x":2.25, "y":3, "w":1.25},
+                {"label":"Space/Fn2", "x":3.5, "y":3, "w":2.25},
+                {"label":"Space", "x":6.25, "y":3, "w":2.75},
+                {"label":"Alt", "x":9, "y":3},
+                {"label":"Left", "x":10.25, "y":3.25},
+                {"label":"Down", "x":11.25, "y":3.25},
+                {"label":"Right", "x":12.25, "y":3.25},
+                {"label":"0", "x":13.5, "y":3},
+                {"label":".", "x":14.5, "y":3},
+            ]
+        }
+    }
+}

keyboards/acheron/elongate/keymaps/default/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2020 Gondolindrim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT( /* Base */
+    KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,            KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,    KC_P7,    KC_P8,   KC_P9,
+    KC_SLCK,  KC_A,    KC_S,    KC_D,    KC_F,            KC_G,    KC_H,    KC_J,    KC_K,    KC_L,             KC_ENTER,   KC_P4,    KC_P5,   KC_P6,
+    KC_LSHIFT,         KC_Z,    KC_X,    KC_C,            KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, MO(1)  , KC_UP,      KC_P1,    KC_P2,   KC_P3,
+    KC_LCTRL, KC_LWIN, KC_LALT,          LT(2, KC_SPACE),                   KC_SPC,           KC_RALT, KC_LEFT, KC_DOWN,    KC_RIGHT, KC_P0,   KC_DOT),
+[1] = LAYOUT( /* Base */
+    KC_F1,    KC_F2,   KC_F2,   KC_F4,   KC_F5,           KC_F6,   KC_F7,   KC_F8,   KC_LBRC, KC_RBRC, KC_MINS,  KC_EQL,    KC_NLCK, KC_SLCK, KC_CAPS,
+    KC_1,     KC_2,    KC_3,    KC_4,    KC_5,            KC_6,    KC_7,    KC_8,    KC_9,    KC_0,              KC_RSHIFT, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,           KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_TRNS,  KC_PGUP,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS,                           KC_SPC,           KC_TRNS, KC_HOME,  KC_PGDN,   KC_END , KC_TRNS, KC_TRNS),
+[2] = LAYOUT( /* Base */                                    
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS ,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS ,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,          RGB_TOG, RGB_MOD,  RGB_RMOD,        RGB_M_T, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS ,                          KC_SPC,           KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/acheron/elongate/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Elongate

keyboards/acheron/elongate/keymaps/via/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 3