[kle2info] Trim the code in kle2xy (#8955)

* [kle2jinfo] use min/max instead of if

This is a slight change.
Before, the key_skel would keep the invalid value for future keys.
I think this is what was actually intended.

* [kle2info] calculate x

x is the current_x * key_size + (key_size/2)
y is the current_y * key_size + (key_size/2)

no reason to track both

Makefile

@@ -29,6 +29,9 @@ $(info QMK Firmware $(QMK_VERSION))
 endif
 endif
 
+# avoid 'Entering|Leaving directory' messages
+MAKEFLAGS += --no-print-directory
+
 ON_ERROR := error_occurred=1
 
 BREAK_ON_ERRORS = no

docs/config_options.md

@@ -191,7 +191,12 @@ If you define these options you will enable the associated feature, which may in
 * `#define RGBLIGHT_ANIMATIONS`
   * run RGB animations
 * `#define RGBLIGHT_LAYERS`
-  * Lets you define [lighting layers](feature_rgblight.md) that can be toggled on or off. Great for showing the current keyboard layer or caps lock state.
+  * Lets you define [lighting layers](feature_rgblight.md?id=lighting-layers) that can be toggled on or off. Great for showing the current keyboard layer or caps lock state.
+* `#define RGBLIGHT_MAX_LAYERS`
+  * Defaults to 8. Can be expanded up to 32 if more [lighting layers](feature_rgblight.md?id=lighting-layers) are needed.
+  * Note: Increasing the maximum will increase the firmware size and slow sync on split keyboards.
+* `#define RGBLIGHT_LAYER_BLINK` 
+  * Adds ability to [blink](feature_rgblight.md?id=lighting-layer-blink) a lighting layer for a specified number of milliseconds (e.g. to acknowledge an action).
 * `#define RGBLED_NUM 12`
   * number of LEDs
 * `#define RGBLIGHT_SPLIT`

docs/feature_hd44780.md

@@ -1,6 +1,6 @@
 # HD44780 LCD Displays
 
-This is an integration of Peter Fleury's LCD library. This page will explain the basics. [For in depth documentation visit his page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
+This is an integration of Peter Fleury's LCD library. This page will explain the basics. [For in depth documentation visit his page.](http://www.peterfleury.epizy.com/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
 
 You can enable support for HD44780 Displays by setting the `HD44780_ENABLE` flag in your keyboards `rules.mk` to yes.
 
@@ -50,8 +50,8 @@ LCD_DISP_ON_CURSOR_BLINK : display on, cursor on flashing
 ````
 This is best done in your keyboards `matrix_init_kb` or your keymaps `matrix_init_user`.  
 It is advised to clear the display before use.  
-To do so call `lcd_clrsrc()`.
+To do so call `lcd_clrscr()`.
 
 To now print something to your Display you first call `lcd_gotoxy(column, line)`. To go to the start of the first line you would call `lcd_gotoxy(0, 0)` and then print a string with `lcd_puts("example string")`.
 
-There are more methods available to control the display. [For in depth documentation please visit the linked page.](http://homepage.hispeed.ch/peterfleury/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)
+There are more methods available to control the display. [For in depth documentation please visit the linked page.](http://www.peterfleury.epizy.com/doxygen/avr-gcc-libraries/group__pfleury__lcd.html)

docs/feature_rgblight.md

@@ -94,6 +94,7 @@ if `RGBLIGHT_EFFECT_xxxx` or `RGBLIGHT_ANIMATIONS` is defined, you also have a n
 |`RGBLIGHT_MODE_STATIC_GRADIENT`| 0,1,..,9        |Static gradient                        |
 |`RGBLIGHT_MODE_RGB_TEST`     | *None*            |RGB Test                               |
 |`RGBLIGHT_MODE_ALTERNATING`  | *None*            |Alternating                            |
+|`RGBLIGHT_MODE_TWINKLE`      | 0,1,2,3,4,5       |Twinkle                                |
 
 Check out [this video](https://youtube.com/watch?v=VKrpPAHlisY) for a demonstration.
 
@@ -103,8 +104,8 @@ Note: For versions older than 0.6.117, The mode numbers were written directly. I
 
 Use these defines to add or remove animations from the firmware. When you are running low on flash space, it can be helpful to disable animations you are not using.
 
-|Define                              |Default      |Description                                                                          |
-|------------------------------------|-------------|-------------------------------------------------------------------------------------|
+|Define                              |Default      |Description                                                              |
+|------------------------------------|-------------|-------------------------------------------------------------------------|
 |`RGBLIGHT_ANIMATIONS`               |*Not defined*|Enable all additional animation modes.                                   |
 |`RGBLIGHT_EFFECT_ALTERNATING`       |*Not defined*|Enable alternating animation mode.                                       |
 |`RGBLIGHT_EFFECT_BREATHING`         |*Not defined*|Enable breathing animation mode.                                         |
@@ -115,6 +116,7 @@ Use these defines to add or remove animations from the firmware. When you are ru
 |`RGBLIGHT_EFFECT_RGB_TEST`          |*Not defined*|Enable RGB test animation mode.                                          |
 |`RGBLIGHT_EFFECT_SNAKE`             |*Not defined*|Enable snake animation mode.                                             |
 |`RGBLIGHT_EFFECT_STATIC_GRADIENT`   |*Not defined*|Enable static gradient mode.                                             |
+|`RGBLIGHT_EFFECT_TWINKLE`           |*Not defined*|Enable twinkle animation mode.                                           |
 
 ### Effect and Animation Settings
 
@@ -131,6 +133,8 @@ The following options are used to tweak the various animations:
 |`RGBLIGHT_EFFECT_KNIGHT_OFFSET`     |`0`          |The number of LEDs to start the "Knight" animation from the start of the strip by    |
 |`RGBLIGHT_RAINBOW_SWIRL_RANGE`      |`255`        |Range adjustment for the rainbow swirl effect to get different swirls                |
 |`RGBLIGHT_EFFECT_SNAKE_LENGTH`      |`4`          |The number of LEDs to light up for the "Snake" animation                             |
+|`RGBLIGHT_EFFECT_TWINKLE_LIFE`      |`75`         |Adjusts how quickly each LED brightens and dims when twinkling (in animation steps)  |
+|`RGBLIGHT_EFFECT_TWINKLE_PROBABILITY`|`1/127`     |Adjusts how likely each LED is to twinkle (on each animation step)                   |
 
 ### Example Usage to Reduce Memory Footprint
   1. Remove `RGBLIGHT_ANIMATIONS` from `config.h`.
@@ -168,6 +172,9 @@ const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
 // How long (in milliseconds) to wait between animation steps for each of the "Knight" animations
 const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31};
 
+// How long (in milliseconds) to wait between animation steps for each of the "Twinkle" animations
+const uint8_t RGBLED_TWINKLE_INTERVALS[] PROGMEM = {50, 25, 10};
+
 // These control which hues are selected for each of the "Static gradient" modes
 const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64};
 ```
@@ -177,6 +184,10 @@ const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64};
 By including `#define RGBLIGHT_LAYERS` in your `config.h` file you can enable lighting layers. These make
 it easy to use your underglow LEDs as status indicators to show which keyboard layer is currently active, or the state of caps lock, all without disrupting any animations. [Here's a video](https://youtu.be/uLGE1epbmdY) showing an example of what you can do.
 
+### Defining Lighting Layers :id=defining-lighting-layers
+
+By default, 8 layers are possible. This can be expanded to as many as 32 by overriding the definition of `RGBLIGHT_MAX_LAYERS` in `config.h` (e.g. `#define RGBLIGHT_MAX_LAYERS 32`). Please note, if you use a split keyboard, you will need to flash both sides of the split after changing this. Also, increasing the maximum will increase the firmware size, and will slow sync on split keyboards.
+
 To define a layer, we modify `keymap.c` to list out LED ranges and the colors we want to overlay on them using an array of `rgblight_segment_t` using the `RGBLIGHT_LAYER_SEGMENTS` macro. We can define multiple layers and enable/disable them independently:
 
 ```c
@@ -211,8 +222,12 @@ void keyboard_post_init_user(void) {
     rgblight_layers = my_rgb_layers;
 }
 ```
+Note: For split keyboards with two controllers, both sides need to be flashed when updating the contents of rgblight_layers.
 
-Finally, we enable and disable the lighting layers whenever the state of the keyboard changes:
+### Enabling and disabling lighting layers :id=enabling-lighting-layers
+
+Everything above just configured the definition of each lighting layer.
+We can now enable and disable the lighting layers whenever the state of the keyboard changes:
 
 ```c
 layer_state_t layer_state_set_user(layer_state_t state) {
@@ -228,7 +243,40 @@ bool led_update_user(led_t led_state) {
 }
 ```
 
-Note: For split keyboards with two controllers, both sides need to be flashed when updating the contents of rgblight_layers.
+### Lighting layer blink :id=lighting-layer-blink
+
+By including `#define RGBLIGHT_LAYER_BLINK` in your `config.h` file you can turn a lighting
+layer on for a specified duration. Once the specified number of milliseconds has elapsed
+the layer will be turned off. This is useful, e.g., if you want to acknowledge some
+action (e.g. toggling some setting):
+
+```c
+const rgblight_segment_t PROGMEM _yes_layer[] = RGBLIGHT_LAYER_SEGMENTS( {9, 6, HSV_GREEN} );
+const rgblight_segment_t PROGMEM _no_layer[] = RGBLIGHT_LAYER_SEGMENTS( {9, 6, HSV_RED} );
+
+const rgblight_segment_t* const PROGMEM _rgb_layers[] =
+    RGBLIGHT_LAYERS_LIST( _yes_layer, _no_layer );
+
+void keyboard_post_init_user(void) {
+    rgblight_layers = _rgb_layers;
+}
+
+// Note we user post_process_record_user because we want the state
+// after the flag has been flipped...
+void post_process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case DEBUG:
+            rgblight_blink_layer(debug_enable ? 0 : 1, 500);
+            break;
+
+        case NK_TOGG:
+        case NK_ON:
+        case NK_OFF:
+            rgblight_blink_layer(keymap_config.nkro ? 0 : 1, 500);
+            break;
+    }
+}
+```
 
 ## Functions
 

docs/feature_swap_hands.md

@@ -28,3 +28,4 @@ Note that the array indices are reversed same as the matrix and the values are o
 |`SH_MOFF`  |Momentarily turns off swap.                                              |
 |`SH_TG`    |Toggles swap on and off with every key press.                            |
 |`SH_TT`    |Toggles with a tap; momentary when held.                                 |
+|`SH_OS`    |One shot swap hands: toggles while pressed or until next key press.      |

docs/isp_flashing_guide.md

@@ -115,12 +115,18 @@ The simplest and quickest way to get things back to normal is to flash only a bo
 
 You can find the stock bootloaders in the [`util/` folder](https://github.com/qmk/qmk_firmware/tree/master/util). Be sure to flash the correct bootloader for your chip:
 
-* [`atmega32u4`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1_0_0.hex) - Most keyboards, Planck Rev 1-5, Preonic Rev 1-2
-* [`Pro Micro`](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro16.hex) - The default bootloader for Pro Micro controllers
-* [`at90usb1286`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128x_1_0_1.hex) - Planck Light Rev 1
-* [`atmega32a`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32a_1_0_0.hex) - jj40, and other V-USB/ps2avrGB keyboards
+* **Atmel DFU**
+  * [ATmega16U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega16u4_1.0.1.hex)
+  * [ATmega32U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1.0.0.hex)
+  * [AT90USB64](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb64_1.0.0.hex)
+  * [AT90USB128](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128_1.0.1.hex)
+* **Caterina**
+  * [Pro Micro (5V/16MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro16.hex)
+  * [Pro Micro (3.3V/8MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro8.hex)
+* **BootloadHID (PS2AVRGB)**
+  * [ATmega32A](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_ps2avrgb_bootloadhid_1.0.1.hex)
 
-If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU =` line will have the value you need. It may differ between different versions of the board.
+If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU` and `BOOTLOADER` lines will have the value you need. It may differ between different versions of the board.
 
 ### Production Techniques
 

docs/ja/feature_hd44780.md

@@ -55,7 +55,7 @@ LCD_DISP_ON_CURSOR_BLINK : ディスプレイオン、点滅カーソル
 ````
 これはキーボードの `matrix_init_kb` またはキーマップの `matrix_init_user` で行うのが最適です。
 使用前にディスプレイをクリアすることをお勧めします。
-そのためには、`lcd_clrsrc()` を呼びます。
+そのためには、`lcd_clrscr()` を呼びます。
 
 ディスプレイに何かを表示するには、最初に `lcd_gotoxy(column, line)` を呼びます。最初の行の先頭に移動するには、`lcd_gotoxy(0, 0)` を呼び出し、その後 `lcd_puts("example string")` を使って文字列を出力します。
 

docs/keycodes.md

@@ -531,6 +531,7 @@ See also: [Swap Hands](feature_swap_hands.md)
 |`SH_MOFF`  |Momentarily turns off swap.                                              |
 |`SH_TG`    |Toggles swap on and off with every key press.                            |
 |`SH_TT`    |Toggles with a tap; momentary when held.                                 |
+|`SH_OS`    |One shot swap hands: toggle while pressed or until next key press.       |
 
 ## Unicode Support :id=unicode-support
 

doxygen-todo

@@ -1,5 +1,4 @@
 tmk_core/protocol
-tmk_core/protocol/bluefruit
 tmk_core/protocol/chibios
 tmk_core/protocol/iwrap
 tmk_core/protocol/lufa

drivers/oled/oled_driver.c

@@ -479,7 +479,7 @@ void oled_write_ln_P(const char *data, bool invert) {
 void oled_write_raw_P(const char *data, uint16_t size) {
     if (size > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE;
     for (uint16_t i = 0; i < size; i++) {
-        uint8_t c = pgm_read_byte(++data);
+        uint8_t c = pgm_read_byte(data++);
         if (oled_buffer[i] == c) continue;
         oled_buffer[i] = c;
         oled_dirty |= (1 << (i / OLED_BLOCK_SIZE));

keyboards/1upkeyboards/super16/keymaps/nblyumberg/config.h

@@ -0,0 +1,13 @@
+#pragma once
+
+// Time out one shot layers after 3 seconds
+#define ONESHOT_TIMEOUT 3000
+
+#define RGBLED_NUM 16
+
+
+// Undef and redefine default brightness to half of 255
+#undef RGBLIGHT_LIMIT_VAL
+#define RGBLIGHT_LIMIT_VAL 128
+
+#define TAPPING_TERM 200

keyboards/1upkeyboards/super16/keymaps/nblyumberg/keymap.c

@@ -0,0 +1,127 @@
+#include QMK_KEYBOARD_H
+
+uint16_t copy_paste_timer;
+uint16_t enter_timer;
+
+extern rgblight_config_t rgblight_config;
+
+// Define custom keycodes
+enum my_keycodes {
+	KC_CCCV = SAFE_RANGE,
+	KC_2ENTER
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+        //Layer 0 - Base Layer (F13 to F24, and One Shot Layer 1,2,3,4)
+        [0] = LAYOUT_ortho_4x4(
+                KC_F13, KC_F14, KC_F15, KC_F16,
+                KC_F17, KC_CCCV, KC_F19, KC_F20,
+                KC_F21, KC_F22, KC_F23, KC_2ENTER,
+                OSL(1), OSL(2), OSL(3), TG(4)    //Transparent to let you go between layers
+		),
+
+        [1] = LAYOUT_ortho_4x4(
+                LALT(KC_F13), LALT(KC_F14), LALT(KC_F15), LALT(KC_F16),
+                LALT(KC_F17), LALT(KC_F18), LALT(KC_F19), LALT(KC_F20),
+                LALT(KC_F21), LALT(KC_F22), LALT(KC_F23), LALT(KC_F24),
+                KC_TRNS,      KC_TRNS,      KC_TRNS,      KC_TRNS         //Transparent to let you go between layers
+        ),
+
+        //Layer 2 - Shift + Function Key Layer
+        [2] = LAYOUT_ortho_4x4(
+                LSFT(KC_F13), LSFT(KC_F14), LSFT(KC_F15), LSFT(KC_F16),
+                LSFT(KC_F17), LSFT(KC_F18), LSFT(KC_F19), LSFT(KC_F20),
+                LSFT(KC_F21), LSFT(KC_F22), LSFT(KC_F23), LSFT(KC_F24),
+                KC_TRNS,      KC_TRNS,      KC_TRNS,      KC_TRNS         //Transparent to let you go between layers
+        ),
+
+        //Layer 3 - Control + Function Key
+        [3] = LAYOUT_ortho_4x4(
+                LCTL(KC_F13), LCTL(KC_F14), LCTL(KC_F15), LCTL(KC_F16),
+                LCTL(KC_F17), LCTL(KC_F18), LCTL(KC_F19), LCTL(KC_F20),
+                LCTL(KC_F21), LCTL(KC_F22), LCTL(KC_F23), LCTL(KC_F24),
+                KC_TRNS,      KC_TRNS,      KC_TRNS,      KC_TRNS         //Transparent to let you go between layers
+        ),
+
+        //Layer 4 - Keyboard Lights. Programming and Special Functions
+        [4] = LAYOUT_ortho_4x4(
+                KC_MPRV, KC_MPLY, KC_MNXT,   KC_VOLU,
+                RGB_TOG, RGB_MOD, RGB_RMOD,  KC_MUTE,
+                TO(0),   RESET,   EEP_RST, KC_VOLD,
+                KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS         //Transparent to let you go between layers
+        ),
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case KC_CCCV:  // One key copy/paste
+            if (record->event.pressed) {
+                copy_paste_timer = timer_read();
+            } else {
+                if (timer_elapsed(copy_paste_timer) > TAPPING_TERM) {  // Hold, copy
+                    tap_code16(LCTL(KC_C));
+                } else {  // Tap, paste
+                    tap_code16(LCTL(KC_V));
+                }
+            } return true;
+		case KC_2ENTER:
+		    if (record->event.pressed) {
+                enter_timer = timer_read();
+            } else {
+                if (timer_elapsed(enter_timer) > TAPPING_TERM) {  // Hold, shift+enter
+                    tap_code16(LSFT(KC_ENTER));
+                } else {  // Tap, enter
+                    tap_code16(KC_F24);
+                }
+            } 
+			return true;
+        default:
+            return true;
+    }
+}
+
+
+void keyboard_post_init_user(void) {
+	//Enable the LED layers
+	layer_state_set_user(layer_state);
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  rgblight_sethsv_noeeprom(HSV_WHITE);
+  switch(get_highest_layer(state)) {
+  case 1:
+    // Green
+    rgblight_enable_noeeprom();
+    rgblight_sethsv_noeeprom(HSV_GREEN);
+    break;
+  case 2:
+    // Red
+    rgblight_enable_noeeprom();	
+    rgblight_sethsv_noeeprom(HSV_RED);
+    break;
+  case 3:
+    // Blue
+    rgblight_enable_noeeprom();
+    rgblight_sethsv_noeeprom(HSV_BLUE);
+    break;
+  case 4:
+    // Orange
+    rgblight_enable_noeeprom();
+//    rgblight_sethsv_noeeprom(HSV_PURPLE);
+    rgblight_sethsv_noeeprom(HSV_ORANGE);
+    break;
+  default:
+    // White
+    //Read RGB Light State
+    rgblight_config.raw = eeconfig_read_rgblight();
+    //If enabled, set white
+    if (rgblight_config.enable) {
+		rgblight_sethsv_noeeprom(HSV_WHITE);
+	} else { //Otherwise go back to disabled
+		rgblight_disable_noeeprom();
+	}
+    break;
+}
+return state;
+}

keyboards/1upkeyboards/super16/keymaps/nblyumberg/readme.md

@@ -0,0 +1,6 @@
+# Nick B's Super16 keymap
+
+A modification of the default keymap to include layer indicators with RGB
+* Added a time out of 3 seconds to 1 shot layers
+* Reduced brightness to half to reduce power draw
+* Added a one key copy/paste keycode  

keyboards/1upkeyboards/super16/keymaps/nblyumberg/rules.mk

@@ -0,0 +1,2 @@
+RGB_MATRIX_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/acheron/elongate/config.h

@@ -0,0 +1,250 @@
+/*
+Copyright 2020 Gondolindrim
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4150 //AP for AcheronProject
+#define PRODUCT_ID 0x454C // EL for Elongate
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Acheron Project
+#define PRODUCT Elongate
+#define DESCRIPTION Acheron Project Elongate
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 13
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D3, B7, D5, B5, D6 }
+#define MATRIX_COL_PINS { F5, F6, F4, F1, F0, B2, B1, C6, B0, B3, E6, D4, B4}
+//#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN D7
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 16
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//  #define RGBLIGHT_EFFECT_BREATHING
+//  #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//  #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//  #define RGBLIGHT_EFFECT_SNAKE
+//  #define RGBLIGHT_EFFECT_KNIGHT
+//  #define RGBLIGHT_EFFECT_CHRISTMAS
+//  #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//  #define RGBLIGHT_EFFECT_RGB_TEST
+//  #define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+  /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+  #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+  /*==== use exp() and sin() ====*/
+//  #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//  #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/acheron/elongate/elongate.c

@@ -0,0 +1,26 @@
+/* Copyright 2020 Gondolindrim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "elongate.h"
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res) {
+        writePin(D2, led_state.num_lock);
+        writePin(D1, led_state.caps_lock);
+        writePin(D0, led_state.scroll_lock);
+    }
+    return res;
+}

keyboards/acheron/elongate/elongate.h

@@ -0,0 +1,44 @@
+/* Copyright 2020 Gondolindrim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the Keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define KNO KC_NO
+
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K49, K41, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,      K1B, K1C, K4A, K42, \
+    K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K4B, K44, \
+    K30, K31, K32,      K34,           K37,      K3A, K3B, K3C, K3D, K4C, K47  \
+)\
+{\
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KNO, K1B, K1C }, \
+    { K20, KNO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \
+    { K30, K31, K32, KNO, K34, KNO, KNO, K37, KNO, K3A, K3B, K3C, K3D }, \
+    { KNO, K41, K42, KNO, K44, KNO, KNO, K47, KNO, K49, K4A, K4B, K4C }  \
+}

keyboards/acheron/elongate/info.json

@@ -0,0 +1,70 @@
+{
+    "keyboard_name": "Elongate",
+    "url": "http://gondolindrim.github.io/AcheronDocs/elongate/introduction.html",
+    "maintainer": "Gondolindrim",
+    "width": 15.5,
+    "height": 4.25,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"Tab", "x":0, "y":0},
+                {"label":"Q", "x":1, "y":0},
+                {"label":"W", "x":2, "y":0},
+                {"label":"E", "x":3, "y":0},
+                {"label":"R", "x":4, "y":0},
+                {"label":"T", "x":5, "y":0},
+                {"label":"Y", "x":6, "y":0},
+                {"label":"U", "x":7, "y":0},
+                {"label":"I", "x":8, "y":0},
+                {"label":"O", "x":9, "y":0},
+                {"label":"P", "x":10, "y":0},
+                {"label":"Backspace", "x":11, "y":0},
+                {"label":"7", "x":12.5, "y":0},
+                {"label":"8", "x":13.5, "y":0},
+                {"label":"9", "x":14.5, "y":0},
+
+                {"label":"Caps Lock", "x":0, "y":1, "w":1.25},
+                {"label":"A", "x":1.25, "y":1},
+                {"label":"S", "x":2.25, "y":1},
+                {"label":"D", "x":3.25, "y":1},
+                {"label":"F", "x":4.25, "y":1},
+                {"label":"G", "x":5.25, "y":1},
+                {"label":"H", "x":6.25, "y":1},
+                {"label":"J", "x":7.25, "y":1},
+                {"label":"K", "x":8.25, "y":1},
+                {"label":"L", "x":9.25, "y":1},
+                {"label":"Enter", "x":10.25, "y":1.75},
+                {"label":"4", "x":12.5, "y":1},
+                {"label":"5", "x":13.5, "y":1},
+                {"label":"6", "x":14.5, "y":1},
+                
+                {"label":"Shift", "x":0, "y":2, "w":1.75},
+                {"label":"Z", "x":1.75, "y":2},
+                {"label":"X", "x":2.75, "y":2},
+                {"label":"C", "x":3.75, "y":2},
+                {"label":"V", "x":4.75, "y":2},
+                {"label":"B", "x":5.75, "y":2},
+                {"label":"N", "x":6.75, "y":2},
+                {"label":"M", "x":7.75, "y":2},
+                {"label":"<", "x":8.75, "y":2},
+                {"label":"Fn1", "x":9.75, "y":2},
+                {"label":"Up", "x":11.25, "y":2.25},
+                {"label":"1", "x":12.5, "y":2},
+                {"label":"2", "x":13.5, "y":2},
+                {"label":"3", "x":14.5, "y":2},
+                
+                {"label":"Ctrl", "x":0, "y":3, "w":1.25},
+                {"label":"Win", "x":1.25, "y":3},
+                {"label":"Alt", "x":2.25, "y":3, "w":1.25},
+                {"label":"Space/Fn2", "x":3.5, "y":3, "w":2.25},
+                {"label":"Space", "x":6.25, "y":3, "w":2.75},
+                {"label":"Alt", "x":9, "y":3},
+                {"label":"Left", "x":10.25, "y":3.25},
+                {"label":"Down", "x":11.25, "y":3.25},
+                {"label":"Right", "x":12.25, "y":3.25},
+                {"label":"0", "x":13.5, "y":3},
+                {"label":".", "x":14.5, "y":3},
+            ]
+        }
+    }
+}

keyboards/acheron/elongate/keymaps/default/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2020 Gondolindrim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT( /* Base */
+    KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,            KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,    KC_P7,    KC_P8,   KC_P9,
+    KC_SLCK,  KC_A,    KC_S,    KC_D,    KC_F,            KC_G,    KC_H,    KC_J,    KC_K,    KC_L,             KC_ENTER,   KC_P4,    KC_P5,   KC_P6,
+    KC_LSHIFT,         KC_Z,    KC_X,    KC_C,            KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, MO(1)  , KC_UP,      KC_P1,    KC_P2,   KC_P3,
+    KC_LCTRL, KC_LWIN, KC_LALT,          LT(2, KC_SPACE),                   KC_SPC,           KC_RALT, KC_LEFT, KC_DOWN,    KC_RIGHT, KC_P0,   KC_DOT),
+[1] = LAYOUT( /* Base */
+    KC_F1,    KC_F2,   KC_F2,   KC_F4,   KC_F5,           KC_F6,   KC_F7,   KC_F8,   KC_LBRC, KC_RBRC, KC_MINS,  KC_EQL,    KC_NLCK, KC_SLCK, KC_CAPS,
+    KC_1,     KC_2,    KC_3,    KC_4,    KC_5,            KC_6,    KC_7,    KC_8,    KC_9,    KC_0,              KC_RSHIFT, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,           KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_TRNS,  KC_PGUP,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS,                           KC_SPC,           KC_TRNS, KC_HOME,  KC_PGDN,   KC_END , KC_TRNS, KC_TRNS),
+[2] = LAYOUT( /* Base */                                    
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS ,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS ,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,          RGB_TOG, RGB_MOD,  RGB_RMOD,        RGB_M_T, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS ,                          KC_SPC,           KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/acheron/elongate/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Elongate

keyboards/acheron/elongate/keymaps/via/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 3

keyboards/acheron/elongate/keymaps/via/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2020 Gondolindrim
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT( /* Base */
+    KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,            KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,    KC_P7,    KC_P8,   KC_P9,
+    KC_SLCK,  KC_A,    KC_S,    KC_D,    KC_F,            KC_G,    KC_H,    KC_J,    KC_K,    KC_L,             KC_ENTER,   KC_P4,    KC_P5,   KC_P6,
+    KC_LSHIFT,         KC_Z,    KC_X,    KC_C,            KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, MO(1)  , KC_UP,      KC_P1,    KC_P2,   KC_P3,
+    KC_LCTRL, KC_LWIN, KC_LALT,          LT(2, KC_SPACE),                   KC_SPC,           KC_RALT, KC_LEFT, KC_DOWN,    KC_RIGHT, KC_P0,   KC_DOT),
+[1] = LAYOUT( /* Base */
+    KC_F1,    KC_F2,   KC_F2,   KC_F4,   KC_F5,           KC_F6,   KC_F7,   KC_F8,   KC_LBRC, KC_RBRC, KC_MINS,  KC_EQL,    KC_NLCK, KC_SLCK, KC_CAPS,
+    KC_1,     KC_2,    KC_3,    KC_4,    KC_5,            KC_6,    KC_7,    KC_8,    KC_9,    KC_0,              KC_RSHIFT, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,           KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_TRNS,  KC_PGUP,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS,                           KC_SPC,           KC_TRNS, KC_HOME,  KC_PGDN,   KC_END , KC_TRNS, KC_TRNS),
+[2] = LAYOUT( /* Base */                                    
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS ,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS ,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS,          RGB_TOG, RGB_MOD,  RGB_RMOD,        RGB_M_T, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,           KC_TRNS ,                          KC_SPC,           KC_TRNS, KC_TRNS,  KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/acheron/elongate/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/acheron/elongate/readme.md

@@ -0,0 +1,25 @@
+# Acheron Aχξρων 45-S-ATMEGA-MX-TH-WI (codename "Elongate") QMK firmware
+
+<p align="center">
+  <img align="middle" src="https://raw.githubusercontent.com/Gondolindrim/acheronLibrary/master/graphics/acheronLong.png"  width="400"> 
+</p>
+
+## Introduction
+
+This is the QMK firmware repository for the ElongatePCN, compatible with revisions Beta and pre-Beta.
+
+The ElongatePCB is an Open-Hardware guidelines compliant PCB which files can be found at [this link](https://github.com/Gondolindrim/AElongate). Its designer and maintainer is [Gondolindrim](https://github.com/Gondolindrim).
+
+## PCB Documentation
+
+See the [AcheronDocs](https://gondolindrim.github.io/AcheronDocs/elongate/introduction.html) page for the ElongatePCB full documentation. You can also check the KiCad PCB files at the [Elongate GitHub repository](https://github.com/Gondolindrim/Elongate).
+
+Before using the files for personal or commercial use, please read the [Acheron Open-Hardware License V1.2](https://gondolindrim.github.io/AcheronDocs/license/license.html) under which the Austin PCB is published.
+
+## How to compile
+
+After setting up your build environment, you can compile the Austin default keymap by using:
+
+    make acheron/elongate:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/acheron/elongate/rules.mk

@@ -0,0 +1,34 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+LTO_ENABLE = yes

keyboards/atreus/keymaps/xyverz/config.h

@@ -0,0 +1,4 @@
+#pragma once
+
+#undef DEBOUNCE
+#define DEBOUNCE 6

keyboards/atreus/keymaps/xyverz/keymap.c

@@ -4,8 +4,6 @@
 
 #include QMK_KEYBOARD_H
 
-extern keymap_config_t keymap_config;
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -41,6 +39,7 @@ enum planck_keycodes {
 #define ADJUST MO(_ADJUST)
 #define LOWER MO(_LOWER)
 #define RAISE MO(_RAISE)
+#define MACLOCK LGUI(LCTL(KC_Q))
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Dvorak Layer
@@ -119,13 +118,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	|------+------+------+------+------|------.,------|------+------+------+------+------|
 	|      | Left | Down | Right| End  |      ||      | PgUp | Mute | Vol- | Vol+ |      |
 	|------+------+------+------+------|      ||      |------+------+------+------+------|
-	|   ~  |      |      |      | Del  |------'`------| Ins  |      |      |      |      |
+	|   ~  |      |      |      | Del  |------'`------| Ins  |      |      |      |MACLCK|
 	`----------------------------------'              `----------------------------------'*/
   [_LOWER] = LAYOUT(
     KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,
     KC_CAPS, _______, KC_UP,   _______, KC_HOME,                   KC_PGUP, _______, KC_PLUS, KC_LCBR, KC_RCBR,
     _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,                    KC_PGDN, KC_MUTE, KC_VOLD, KC_VOLU, _______,
-    KC_TILD, _______, _______, _______, KC_DEL,  _______, _______, KC_INS,  _______, _______, _______, _______
+    KC_TILD, _______, _______, _______, KC_DEL,  _______, _______, KC_INS,  _______, _______, _______, MACLOCK
   ),
 
   /* RAISE Layer
@@ -136,13 +135,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	|------+------+------+------+------|------.,------|------+------+------+------+------|
 	|      | Left | Down | Right| End  |      ||      | PgUp | Prev | Play | Next |      |
 	|------+------+------+------+------|      ||      |------+------+------+------+------|
-	|   `  |      |      |      | Del  |------'`------| Ins  |      |      |      |      |
+	|   `  |      |      |      | Del  |------'`------| Ins  |      |      |      |MACLCK|
 	`----------------------------------'              `----------------------------------'*/
   [_RAISE] = LAYOUT(
     KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0   ,
     KC_CAPS, _______, KC_UP,   _______, KC_HOME,                   KC_PGUP, _______, KC_EQL,  KC_LBRC, KC_RBRC,
     _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,                    KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, _______,
-    KC_GRV,  _______, _______, _______, KC_DEL,  _______, _______, KC_INS,  _______, _______, _______, _______
+    KC_GRV,  _______, _______, _______, KC_DEL,  _______, _______, KC_INS,  _______, _______, _______, MACLOCK
   ),
 
   /* ADJUST Layer
@@ -190,4 +189,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       return false;
   }
   return true;
-}
+}

keyboards/atreus/keymaps/xyverz/readme.md

@@ -77,7 +77,7 @@ Control.
 	|------+------+------+------+------|------.,------|------+------+------+------+------|
 	|      | Left | Down | Right| End  |      ||      | PgUp | Mute | Vol- | Vol+ |      |
 	|------+------+------+------+------|      ||      |------+------+------+------+------|
-	|   ~  |      |      |      | Del  |------'`------| Ins  |      |      |      |      |
+	|   ~  |      |      |      | Del  |------'`------| Ins  |      |      |      |MACLCK|
 	`----------------------------------'              `----------------------------------'
 
 
@@ -90,7 +90,7 @@ Control.
 	|------+------+------+------+------|------.,------|------+------+------+------+------|
 	|      | Left | Down | Right| End  |      ||      | PgUp | Prev | Play | Next |      |
 	|------+------+------+------+------|      ||      |------+------+------+------+------|
-	|   `  |      |      |      | Del  |------'`------| Ins  |      |      |      |      |
+	|   `  |      |      |      | Del  |------'`------| Ins  |      |      |      |MACLCK|
 	`----------------------------------'              `----------------------------------'
 
 ### Layer 6: ADJUST layer

keyboards/aves65/aves65.c

@@ -0,0 +1 @@
+#include "aves65.h"

keyboards/aves65/aves65.h

@@ -0,0 +1,19 @@
+#pragma once
+#include "quantum.h"
+
+// readability
+#define ___ KC_NO
+#define LAYOUT_65_iso_blocker( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,      k1e, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+    k40, k41, k42,                k46,                k4a, k4b, k4c, k4d, k4e  \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, ___, k1e }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e }, \
+    { k40, k41, k42, ___, ___, ___, k46, ___, ___, ___, k4a, k4b, k4c, k4d, k4e }  \
+}