The rev3 boards use RGBLIGHT_ENABLE now instead of BACKLIGHT_ENABLE.
This resolves the issue of flashing and losing functionality with the default keymap.
Added missing closing comment bit */
This seems to cause the QMK configurator to break when clicking the compile button:
Compiling: keyboards/handwired/split89/split89.c In file included from [K:
ent]
/* COL2ROW, ROW2COL */
[K
cc1: all warnings being treated as errors
|
|
|
make: *** ine/keyboards/handwired/split89/split89.o] Error 1
* Extensible split data sync capability through transactions.
- Split common transport has been split up between the transport layer
and data layer.
- Split "transactions" model used, with convergence between I2C and
serial data definitions.
- Slave matrix "generation count" is used to determine if the full slave
matrix needs to be retrieved.
- Encoders get the same "generation count" treatment.
- All other blocks of data are synchronised when a change is detected.
- All transmissions have a globally-configurable deadline before a
transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms).
- Added atomicity for all core-synced data, preventing partial updates
- Added retries to AVR i2c_master's i2c_start, to minimise the number of
failed transactions when interrupts are disabled on the slave due to
atomicity checks.
- Some keyboards have had slight modifications made in order to ensure
that they still build due to firmware size restrictions.
* Fixup LED_MATRIX compile.
* Parameterise ERROR_DISCONNECT_COUNT.
* Intended usage is data validation in split transport code.
* Default space efficient algorithm.
* Opt-in fast table based algorithmn with #define CRC8_USE_TABLE switch.
* Define switches for size and speed optimized versions, the default is size
optimized by using uint_least8_t as datatype for calculations.
* #define CRC8_OPTIMIZE_SPEED uses uint_fast8_t as datatype for
calculations, this only affects 32-bit Archs like ARM and RISC-V.
* Placeholder crc_init() function for hardware backed crc calculation,
not implemented yet.
This binary keymap for ANAVI Macro Pad 2 helps with 0 and 1:
left key: 0
right key: 1
Combo press both keys to control the backlit.
Suggested-by: Chris <christopher.walker@crowdsupply.com>
Signed-off-by: Leon Anavi <leon@anavi.org>
* Top level heading for common config
Prior to this, the some of the common config looks like a detail of the APA102 driver
* Change heading to Common Config (RGB Matrix)
This commit makes atmel-dfu and chibios-dfu bootloaders retry to detect the bootloader
every 0,5 seconds (now configurable via the BOOTLOADER_RETRY_TIME makefile variable),
and a period is printed after every try. This is a much more pleasant behaviour than
the 5s retry timeout.
* Set saturation limit to jellybean_raindrops_anim.h
* Use faster bit-shift maths and qadd8
* Remove extra parenthesis
* Single bitmask operation is sufficient.
Co-authored-by: filterpaper <filterpaper@localhost>
This keymap for ANAVI Macro Pad 2 contains a couple of Skype
shortcuts for MS Windows and GNU/Linux distributions:
- Ctrl+M: Mute/unmute microphone
- Ctrl+Shift+K: Start/stop camera
Signed-off-by: Leon Anavi <leon@anavi.org>
* Enable SPI1 for GMMK pro
* Setup initial boilerplate for new LED driver
* RGB matrix minimally functional
* Map full LED matrix
* Return keymap to default
* Fix printscreen LED mapping
* Reduce max brightness
* Default values for AW20216
* Add documentation for AW20216
* Disable console and warnings
* Run cformat
* Update drivers/awinic/aw20216.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* make aw struct match issi struct
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add led location defines
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Use led pin definitions in keyboard.c
* Add driver indices to led map
* Fix elif typo
* Run cformat
* Update docs
* Fix typo in docs
* Document global brightness limits
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add fast_timer_t that is 16-bit or 32-bit based on architecture
A 16-bit timer will overflow sooner but be faster to compare on AVR.
* Avoid 8-bit timer overflows in debounce algorithms
Count down remaining elapsed time instead of trying to do 8-bit timer
comparisons.
Add a "none" implementation that is automatically used if DEBOUNCE is
0 otherwise it will break the _pk/_pr count down.
* Avoid unnecessary polling of the entire matrix in sym_eager_pk
The matrix only needs to be updated when a debounce timer expires.
* Avoid unnecessary polling of the entire matrix in sym_eager_pr
The matrix only needs to be updated when a debounce timer expires.
The use of the "needed_update" variable is trying to do what
"matrix_need_update" was added to fix but didn't work because it only
applied when all keys finished debouncing.
* Fix sym_defer_g timing inconsistency compared to other debounce algorithms
DEBOUNCE=5 should process the key after 5ms, not 6ms
* Add debounce tests
* Use memcmp to determine if matrix changed.
* Firmware size issues.
* Add documentation for the lack of need of MATRIX_ROW_PINS/MATRIX_COL_PINS, when overriding low-level matrix functions.
* Set bootloader to stm32-dfu for STM32F303
* Set bootloader to stm32-dfu for STM32F0x2
* Set bootloader to stm32-dfu for STM32F4x1
* Set bootloader to stm32duino for sowbug
* Delete redundant bootloader_defs headers
* Add some missing MCU name comments
* Move APM32 dfu-suffix overrides underneath bootloader
* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
* add readPort() and some API to 'tmk_core/common/*/gpio.h'
The following macros have been added to gpio.h.
* readPort(port)
* setPortBitInput(port, bit)
* setPortBitInputHigh(port, bit)
* setPortBitOutput(port, bit)
* writePortBitLow(port, bit)
* writePortBitHigh(port, bit)
* add data type 'port_data_t' into gpio.h
* rename qmk_pin to pin
Debian bullseye (testing at the moment, but seems close to release) has
avr-libc 1:2.0.0+Atmel3.6.2-1.1 with some changes taken from the
Atmel-distributed toolchain. In particular, the <avr/io.h> header for
ATmega32A (avr/iom32a.h) now defines the FLASHEND constant as `0x7FFFU`,
and that `U` suffix breaks the firmware size check code, because the
shell arithmetic expansion that is used to calculate `MAX_SIZE` does not
support those C-specific suffixes.
As a workaround, add `-D__ASSEMBLER__` to the C preprocessor invocation
that is used to expand those macros; in this case avr/iom32a.h defines
`FLASHEND` without the `U` suffix, and everything works as it did before
with older avr-libc versions.
The exact same code is present in two places; they are both changed,
even though the code in `tmk_core/avr.mk` is actually never used for
ATmega32A (and the header for ATmega32U4 does not add that `U` suffix to
`FLASHEND` for some reason).
* [Keymap] merge jdelkins userspace and associated keymaps
* Add copyright & license info
* Change rgblight_config.enable to rgblight_is_enabled()
* Update keyboards/dz60/keymaps/jdelkins/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/dz60/keymaps/jdelkins/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/dz60/keymaps/jdelkins/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Remove superfluous includes
* Change EXTRAFLAGS+=-flto to LTO_ENABLE=yes
* Remove unnecessary jdelkins_ss symlink in users
* Add copyright and license notices
* Use preferred way to determine capslock / numlock state
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add #pragma once to a header
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Include QMK_KEYBOARD_H only once, in userspace header
* Remove unnecessary initialization in matrix_init_keymap
* Do process_record_keymap before cases handled in process_record_user
* Reorganize & simplify secrets feature enablement
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove superfluous break
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* include "print.h" instead of <print.h>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_cod16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* add #pragma once to a header
Co-authored-by: Ryan <fauxpark@gmail.com>
* include "print.h" instead of <print.h>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use :flash target where possible
* Remove special case flash target and use PROGRAM_CMD
* dz60/jdelkins_ss: use tap_code16
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update ChibiOS, ChibiOS-Contrib.
* Add instructions.
* Wrong remote name
* Explicit version tag.
* Add link to procedure on the breaking changes page.
The code using sprintf() did not fit into flash when `merge/um70:via`
was compiled with avr-gcc 5.4.0:
* The firmware is too large! 29756/28672 (1084 bytes over)
Replacing `sprintf(wpm_str, " %03d", current_wpm);` with custom
formatting code reduces the firmware size by 1504 bytes, which is enough
to make the `merge/um70:via` firmware fit:
* The firmware size is approaching the maximum - 28252/28672 (98%, 420 bytes free)
* Add Per Key functionality for AutoShift (#11536)
* LED Matrix: Reactive effect buffers & advanced indicators (#12588)
* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)
* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)
* LED Matrix: Split (#12633)
* [CI] Format code according to conventions (#12650)
* feat: infinite timeout for leader key (#6580)
* feat: implement leader_no_timeout logic
* docs(leader_key): infinite leader timeout docs
* Format code according to conventions (#12680)
* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)
* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)
Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).
* Update ADC docs to match the actually used resolution
ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly. Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).
* Fix pinToMux() for B12 and B13 on STM32F3xx
Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.
* Add support for all possible analog pins on STM32F1xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families). Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).
Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.
* Add support for all possible analog pins on STM32F4xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.
Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.
Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.
* Fix STM32F3xx ADC mux table in documentation
The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).
* Add STM32F1xx ADC pins to the documentation
* Add STM32F4xx ADC pins to the documentation
* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)
* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.
* Update flashing.md
* Update chconf.h
* Update config.h
* Update halconf.h
* Update mcuconf.h
* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)
* Add support for MCU = STM32F446 (#12619)
* Add support for MCU = STM32F446
* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h
* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64
* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.
* Format code according to conventions (#12682)
* Format code according to conventions (#12687)
* Add STM32L433 and L443 support (#12063)
* initial L433 commit
* change to XC
* fix L433
* disable all peripherals
* update system and peripheral clocks
* 433 change
* use its own board files
* revert its own board files
* l433 specific change
* fix stm32l432xx define
* remove duplicate #define
* fix bootloader jump
* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h
* move to L443
* move to L443
* fix sdmmc in mcuconf.h
* include STM32L443
* add L443
* Include L443 in compatible microcontrollers
* Include L443 in compatible microcontrollers
* Update config bootloader jump description
* Update ChibiOS define reasoning
* Update quantum/mcu_selection.mk
* fix git conflict
* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)
* Fix bad PR merge for #6580. (#12721)
* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)
* [CI] Format code according to conventions (#12731)
* Fixing transport's led/rgb matrix suspend state logic (#12770)
* [CI] Format code according to conventions (#12772)
* Fix comment parsing (#12750)
* Added OLED fade out support (#12086)
* fix some references to bin/qmk that slipped in (#12832)
* Resolve a number of warnings in `qmk generate-api` (#12833)
* New command: qmk console (#12828)
* stash poc
* stash
* tidy up implementation
* Tidy up slightly for review
* Tidy up slightly for review
* Bodge environment to make tests pass
* Refactor away from asyncio due to windows issues
* Filter devices
* align vid/pid printing
* Add hidapi to the installers
* start preparing for multiple hid_listeners
* udev rules for hid_listen
* refactor to move closer to end state
* very basic implementation of the threaded model
* refactor how vid/pid/index are supplied and parsed
* windows improvements
* read the report directly when usage page isn't available
* add per-device colors, the choice to show names or numbers, and refactor
* add timestamps
* Add support for showing bootloaders
* tweak the color for bootloaders
* Align bootloader disconnect with connect color
* add support for showing all bootloaders
* fix the pyusb check
* tweaks
* fix exception
* hide a stack trace behind -v
* add --no-bootloaders option
* add documentation for qmk console
* Apply suggestions from code review
* pyformat
* clean up and flesh out KNOWN_BOOTLOADERS
* Remove pointless SERIAL_LINK_ENABLE rules (#12846)
* Make Swap Hands use PROGMEM (#12284)
This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.
* Fix another bin/qmk reference (#12856)
* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)
* Fixup build errors on `develop` branch. (#12723)
* LED Matrix: Effects! (#12651)
* Fix syntax error when compiling for ARM (#12866)
* Remove KEYMAP and LAYOUT_kc (#12160)
* alias KEYMAP to LAYOUT
* remove KEYMAP and LAYOUT_kc
* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)
* Rename `point_t` -> `led_point_t` (#12864)
* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)
* Add missing LED Matrix suspend code to suspend.c (#12878)
* LED Matrix: Documentation (#12685)
* Deprecate `send_unicode_hex_string()` (#12602)
* Fix spelling mistake regarding LED Matrix in split_common. (#12888)
* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)
* Use milc.subcommand.config instead of qmk.cli.config (#12915)
* Use milc.subcommand.config instead
* pyformat
* remove the config test
* Add function to allow repeated blinking of one layer (#12237)
* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time
* Update doc
* Rework rgblight blinking according to requested change
* optimize storage
* Fixup housekeeping from being invoked twice per loop. (#12933)
* matrix: wait for row signal to go HIGH for every row (#12945)
I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/
Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.
After this commit, all keyboard matrix rows are interpreted correctly.
I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.
* ensure we do not conflict with existing keymap aliases (#12976)
* Add support for up to 4 IS31FL3733 drivers (#12342)
* Convert Encoder callbacks to be boolean functions (#12805)
* [Keyboard] Fix Terrazzo build failure (#12977)
* Do not hard set config in CPTC files (#11864)
* [Keyboard] Corne - Remove legacy revision support (#12226)
* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)
* Add Full-duplex serial driver for ARM boards (#9842)
* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)
* Backlight: add defines for default level and breathing state (#12560)
* Add dire message about LUFA mass storage bootloader (#13014)
* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)
Was causing compiler errors on some systems.
* Fix keyboards/keymaps for boolean encoder callback changes (#12985)
* `backlight.c`: include `eeprom.h` (#13024)
* Add changelog for 2021-05-29 Breaking Changes merge (#12939)
* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version
* Add recent develop changes
* Sort recent develop changes
* Remove sections for ChibiOS changes per tzarc
No ChibiOS changes this round.
* Add and sort recent develop changes
* add notes about keyboard moves/deletions
* import changelog for PR 12172
Documents the change to BOOTMAGIC_ENABLE.
* update section headings
* re-sort changelog
* add additional note regarding Bootmagic changes
* remove changelog timestamp
* update dates in main Breaking Changes docs
* fix broken section anchors in previous changelogs
* add link to backlight/eeprom patch to changelog
* highlight some more changes
* link PRs from section headers
* Restore standard readme
* run: qmk cformat --core-only
* Align our subprocess usage with current best practices.
* remove unused import
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* fix the cpp invocation for older python
* allow for unprompted installation
* make sure qmk new-keyboard works on windows
Co-authored-by: Ryan <fauxpark@gmail.com>
I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/
Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.
After this commit, all keyboard matrix rows are interpreted correctly.
I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.
* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time
* Update doc
* Rework rgblight blinking according to requested change
* optimize storage
This keymap contains the following shortcuts for Microsoft Teams
on MS Windows and GNU/Linux distributions:
- Ctrl+Shift+M: Toggle mute
- Ctrl+Shift+O: Toggle video (doesn't work in a web browser)
NOTE: Mac users should replace Ctrl with Command in all shortcuts
Signed-off-by: Leon Anavi <leon@anavi.org>
* Create piv3rt's keymap
* Use tabs's LED as a caps lock indicator
* Fix indentation (tabs -> spaces)
* Set inital LED matrix color & mode
* Rename layers and add an RGBRST keycode
* Disable unused RGB effects
* Add RGB profiles
* Use ESC's LED as a num lock indicator
* Light up the keypad when _NUM layer is active
* Realign layers
* Remove legacy layer
* Fix CAPS key macro
* Reduce TAPPING_TERM to 100
* Change the caps LED to red and display the numlock one on special layers
* Add french accentuated caps + minor improvements on layers
* Remove left numpad
* Add french quotation marks
* Add key KC_NUBS
* Add terminal copy/paste
* Disable led profile on wakeup
* Change the default color
* Add AMD replay and record keys
* Add a MacOS layer
* Move Numpad
* Add GPLv2 license information
* Optimise custom RGB matrix
* Move keypad toggle and disable MAC led indicator
* Remove unnecessary check for RGB matrix
* Initial configuration with led and three layers
+ First layer contains classic keys
+ Second layer contains F keys and media keys
+ Third layer contains numbers in the top portion of the letter keys
+ Default LEDs configuration
* RGB toggle
* Documentation and minor changes
* Added LGUI key and remapped layer 2 on layer 1
* Removed backlight and led keys
* Updated keymap graphical representation
* Switched LGui with Lalt to emulate macOS layout
* Updated keymap with GNU License
* Some fixes for the Bakeneko variant DB60s
* Add copyright to header
* Add .python-version to gitignore for people who use pyenv or similar
* update readme
* Add more readmes
* Add more readmes
* Update the versions to have different product IDs
* Update readme
* Add missing rules.mk
* Fix matrix on hotswap
* remove iso from hotswap
* Fix hotswap spacebar
* Revert gitignore changes
* Fix layouts
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add split configs
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add license to config
* or equivalent
Co-authored-by: Ryan <fauxpark@gmail.com>
* add custom keymaps for BM68rgb
* add user keymap for bm68rgb
* fix grammar
* add custom hub16 keymap
* Apply suggestions from code review
* fix errorenously included hub16 file
* add GPL headers
* revert defining dfa_state in keymap.h
* Update keyboards/bm68rgb/keymaps/peepeetee/keymap.h
* enable tap dance, add tap dance to left alt
* move the module checking and updating to lib/python
* make flake8 happy
* Update lib/python/qmk/cli/__init__.py
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* prompt the user to disable developer mode
* pyformat
* flake8
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* add a test and dry-run to qmk generate-api
* add a dry-run to qmk pyformat
* Add a --dry-run to qmk cformat
* reverse the order of nose2 and flake8 tests
* run CI test against cformat and pyformat
* fix programming errors
* tweak job name
* fix argument
* refine the files we select
* fix stack trace in --ci
* make cformat exit clean
* fix c file extensions
* decouple CI from pyformat
* remove --ci arg
* make ci happy
* use the environment var instead
* change output to text
* fix log message
* replace tabs
This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.
* stash poc
* stash
* tidy up implementation
* Tidy up slightly for review
* Tidy up slightly for review
* Bodge environment to make tests pass
* Refactor away from asyncio due to windows issues
* Filter devices
* align vid/pid printing
* Add hidapi to the installers
* start preparing for multiple hid_listeners
* udev rules for hid_listen
* refactor to move closer to end state
* very basic implementation of the threaded model
* refactor how vid/pid/index are supplied and parsed
* windows improvements
* read the report directly when usage page isn't available
* add per-device colors, the choice to show names or numbers, and refactor
* add timestamps
* Add support for showing bootloaders
* tweak the color for bootloaders
* Align bootloader disconnect with connect color
* add support for showing all bootloaders
* fix the pyusb check
* tweaks
* fix exception
* hide a stack trace behind -v
* add --no-bootloaders option
* add documentation for qmk console
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* pyformat
* clean up and flesh out KNOWN_BOOTLOADERS
Co-authored-by: zvecr <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* resynced with upstream, and adjusted keymap layout for planck
* updated keyboard layout
Signed-off-by: Sean Johnson <sean@ttys0.net>
* swapped out bspc for del on symb layer
Signed-off-by: Sean Johnson <sean@ttys0.net>
* fixed typo with brightness media keys
* turns out my brightness config was correct, it was macOS that had gone sideways
* updated to bring in line with requirements for merging into upstream
* removed redundant config from rules.mk
moved media controls to FUNC layer for Planck layout
* added GPL2+ compatible license header
Signed-off-by: Sean Johnson <sean@skj.dev>
* removed unused MIDI comment
Signed-off-by: Sean Johnson <sean@skj.dev>
* removed extraneous MIDI comments
* removed extraneous comments
* update for LTO and guard RGBLED_SPLIT
* Revert "update for LTO and guard RGBLED_SPLIT"
This reverts commit ce81177cbe.
* Revert "Revert "update for LTO and guard RGBLED_SPLIT""
This reverts commit 67da0ce9f3.
* update iris keymap for keymap_kc removal and overhaul userspace
* add licenses
* fix tap_dance error when rgblight is disabled and update/clean iris/sinc maps
The easiest way to install QMK CLI and all the necessary
dependencies on FreeBSD is to use the packages
from the official FreeBSD Ports Collection.
This is possible since QMK CLI has been added to the Ports Collection:
https://www.freshports.org/sysutils/py-qmk/
When the USB device is connected, FreeBSD creates not one, but three
device nodes in /dev, e.g.: /dev/ttyU0, /dev/ttyU0.init, and
/dev/ttyU0.lock.
As a result, this leads to the USB variable containing 3 paths
(and therefore, whitespace) and messages like this one:
Device /dev/ttyU0
/dev/ttyU0.init
/dev/ttyU0.lock has appeared; assuming it is the controller.
This changes fixes the use of the -z flag of "[" (see test(1)). Also, it
removes undesired paths from the USB variable, leaving only
one path there (i.e., "/dev/ttyU0").
* Add andromeda to qmk
* Fix
* Another fix
* Fix via map
* Update andromeda
* Update confs for new qmk master
* Apply suggestions from code review
* Remove the ch hal and mcu conf as the andromeda does not need extra peripherals
* Update keyboards/ai03/andromeda/rules.mk
* Apply suggestions from code review
* Add bootloader note to readme
* [Keyboard] added Time 80 Reforged by Fox Lab
* added Time 80 Reforged by Fox Lab
* split to two sub directories for universal and hotswap pcb
* Apply suggestions from code review
* Modified codes as suggested
* update code as suggested
* rgb log light keymaps added
* update code as suggested
* enable rgblight right to TIME logo, and add keymaps for it's control
* Apply suggestions from code review
* enable built-in switch LED support
* Apply suggestions from code review
* Apply suggestions from code review
* Apply suggestions from code review
* Apply suggestions from code review
* Set Dvorak as the standard base layer
* Remove unneeded includes
* Remove custom handling for Quake 2
Have now rewritten my in-game configuration to use Dvorak mapping instead of QWERTY, which means I don't need any of this stuff.
* Clean up comments in KC60 keymap
* Allow <keyboard>.h to be optional when going data driven
* Remove stub files as no longer required
* Rename function
* Remove include of layouts.h for now
* Take advantage of type=keyboard_folder
* Take advantage of type=keyboard_folder - kb should still be mandatory
* add info.json file
* refactor keymaps for readability
* rework layout macro
Arranges the layout macro and keycodes to resemble the physical layout.
* readme touch-up
Corrections to capitalization and spelling, and removal of extra white space.
* Added WholesomeDucky keymap for GMMK Pro
* Finalized keymap & added 1000hz polling for GMMK Pro
* Corrected for RAlt and Fn being swapped
* Fixed RAlt and Fn being swapped in the layout definition. Updated personal keymap to reflect fixed layout.
* Removed an old comment from personal keymap for GMMK Pro
* added VIA support
* Defined bootmagic row and column for GMMK Pro Esc key
* Update keyboards/gmmk/pro/config.h
* Update keyboards/gmmk/pro/keymaps/via/keymap.c
* Update keyboards/gmmk/pro/keymaps/via/keymap.c
* Add support for MCU = STM32F446
* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64
* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.
Co-authored-by: Nick Brassel <nick@tzarc.org>
* peepeetee's bodged hub16 keymap
* add layer 3 lighting
* actually adds layer 3 lighting
* fixes layer 0; behavior is that layor 0 is unaltered from base pattern, while other states have distinct solid colors
Tap dance callbacks may register weak mods; one case when it happens
is when a tap dance registers a key with modifiers. When the tap
dance is interrupted by pressing another key, these weak mods could
affect the interrupting key (normally any stale weak mods are cleared
at the start of action_exec() when handling a keypress event, but the
tap dance interrupt check code is called later, and the weak mods left
by that code were not cleared). Add another clear_weak_mods() call to
preprocess_tap_dance() to make sure that the interrupting keypress is
not affected by unrelated weak mods from the previous tap dance.
Fixes#12445.
* Fix how USB queue overflow is handled in chibios.
This commit reverts PR 12472 (commit c823fe2d3f),
and it implements the original intent of the commit in a better way.
The original intent of the above mentioned commit was to not deadlock the
keyboard when console is enabled, and hid_listen is not started.
The above mentioned commit had a few drawbacks:
1) When a lot of data was printed to the console, the queue would get full,
and drop data, even if hid_listen was running. (For example having matrix debug
enabled just didn't work right at all)
2) I believe the function in which this was implemented is used by all other
USB endpoints, so with the above change, overflow, and data loss could
happen in other important functions of QMK as well.
This commit implements deadlock prevention in a slightly similar way to how
it's done on AVR. There is an additional static local variable, that memorizes
whether the console has timeouted before. If we are in the timeouted=false
state, then we send the character normally with a 5ms timeout. If it does
time out, then hid_listen is likely not running, and future characters should
not be sent with a timeout, but those characters should still be sent if there
is space in the queue. The difference between the AVR implementation and this
one is that the AVR implementation checks the queue state directly, but this
implementation instead attempts to write the character with a zero timeout.
If it fails, then we remain in the timeouted=true state, if it succeeds, then
hid_listen started removing data from the queue, so we can go out of the
timeouted=true state.
* Added comment explaining the timeouted logic to console flow control.
* Console flow control: refactor chibios flowcontrol code to make it more readable, and rename the timeouted variable to timed_out on both chibios and lufa. Changed comments to says timed_out is an approximation of listener_disconnected, to make it clear that it's not the same thing
* fix typo
* Add RGB matrix suspend wake function for Planck/rev6
* Update suggested definition to allow user override.
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: filterpaper <filterpaper@localhost>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)
Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).
* Update ADC docs to match the actually used resolution
ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly. Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).
* Fix pinToMux() for B12 and B13 on STM32F3xx
Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.
* Add support for all possible analog pins on STM32F1xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families). Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).
Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.
* Add support for all possible analog pins on STM32F4xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.
Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.
Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.
* Fix STM32F3xx ADC mux table in documentation
The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).
* Add STM32F1xx ADC pins to the documentation
* Add STM32F4xx ADC pins to the documentation
Git keymap for ANAVI Macro Pad 8 with the following shortcuts.
On the first row from left to right:
- git status
- git log
- git pull
- git push
On the second row from left to right:
- git diff
- git add
- git commit
- FN key to switch to the 2nd layout and control lights
Reduce the number of supported RGB animations and effects in
config.h to shrink the firmware size and fit it on the device.
Signed-off-by: Leon Anavi <leon@anavi.org>
The keymap for this PCB as of April 5, 2020 has a 4rth, largely superfluous layer, creating a total of 5 layers.
When ported to VIA, this results in a layer that users can access but cannot edit. I propose removing this layer completely along with it's access from the default.
The dac_basic driver did not work properly with `#define AUDIO_PIN A4`
(instead of configuring the A4 pin, the driver actually was switching
the A5 pin to analog mode, breaking any other usage of that pin in
addition to emitting a distorted signal on the improperly configured
A4 pin). Fix the code to configure the A4 pin as intended.
- Use normal ChibiOS I2C driver.
- Move drawing code to housekeeping -- previously it was during matrix
scan, which gets executed during bootmagic checks. However, bootmagic
is invoked before QWIIC subsystem is enabled, which means I2C isn't
configured yet. All I2C calls to the OLED fail with timeouts while
bootmagic is being checked. Housekeeping ensures this is executed once
the system has initialised and settled.
- QWIIC OLED driver: properly clear out OLED buffer when clearing screen.
This keymap for ANAVI Macro Pad 2 contains a couple of shortcuts
for Google Meet:
- left key: turn on/off the microphone (mute button)
- right key: turn on/off the camera
Signed-off-by: Leon Anavi <leon@anavi.org>
Clarify that the link to the github/forking instructions is a link to how to fork this project. Previous wording implied that the link was to a how-to-use github in general page.
Before this commit, attaching an ARM-based (i.e. ChibiOS-based) keyboard that
uses CONSOLE_ENABLE = yes and produces debug messages would deadlock the
keyboard unless one was running hid_listen.
With this commit, dead-locking writes to the queue are detected and prevented.
fixes#5631
* cleanup keyboards/helix/{rev2|rev3_5rows}/keymaps/five_rows
* Made the layout data easier to read.
* helix/rev2/keymaps/five_rows/keymap.c
* helix/rev3_5rows/keymaps/five_rows/keymap.c
* The following two were made the same.
* keymaps/five_rows/config.h
* keymaps/five_rows/oled_display.c
The binary of the compilation result has not changed.
* update keyboards/helix/rev2/keymaps/five_rows/rules.mk
KEYBOARD_LOCAL_FEATURES_MK was moved to the end.
* add '#define DISABLE_SYNC_TIMER' into helix/rev3_5rows/keymaps/five_rows/config.h
The sync timer features worsen the matrix scan rate of the Helix keyboard. I'm not sure if it makes sense to have sync timer features enabled on the Helix keyboard. So in my keymap I disable this.
This resolves to <https://pypi.org/project/Wave/>, but the places where
the `wave` module is imported make it clear that the standard library
module <https://docs.python.org/3/library/wave.html> was intended.
Was originally added in #11820 and used in the following files:
* `util/sample_parser.py`
* `util/wavetable_parser.py`
* [nix] Update nixpkgs to avoid issues with Big Sur
The older nixpkgs snapshot did not contain nix changes to the
compiler/linker hooks that are necessary for compatibility with MacOS
Big Sur. The fix is simply to update to a newer snapshot.
* [nix] Add a poetry manifest and use poetry to build the Python env
* [nix] Use niv to manage upstream sources like nixpkgs
* [nix] Update to newer nixpkgs snapshot
* [nix] Bump python package versions
The right-most top-most key on the Kinesis Advantage keyboard is labeled
“Progrm” and was meant to enter the Teensy bootloader as per the comment.
However, the keycode was set to KC_1, which just produces a “1”.
It should be RESET instead.
This commit fixes KC_1 to RESET in all files where the fix is needed.
The other files have already been fixed independently.
This moves the config_common.h into the files that include ../config.h,
so that the kint36/config.h does not include it (which would cause
compilation errors).
* Add IO Warning to WSL section of Getting Started
* FauxPark suggestion (thanks!)
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* In split keyboards fix connection issue when slave and OLED are connected via I2C. Fix#9335
* Revert "In split keyboards fix connection issue when slave and OLED are connected via I2C. Fix#9335"
This reverts commit 3ee639e1f3.
* In split keyboards fix connection issue when slave and OLED are connected via I2C. Fix#9335
* Update drivers/oled/oled_driver.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: osenchenko <osechenko@chiefmate.io>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* added adns5050 sensor code, as well as implementations for the Ploopy Mini and the Ploopy Nano
* fixed spurious scrolling issue
* recommended fixes for pr linting and cleanup
* Minor improvements to BM68RGB
* Add grave esc and LTO support
* Move comments to end of line
* Document the use of qmk script for compiling and flashing
* Revert arrow key flags back to mod
* Update keyboards/bm68rgb/bm68rgb.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/bm68rgb/bm68rgb.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove grave escape
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update tab spacing
Co-authored-by: Ryan <fauxpark@gmail.com>
* Reverted make default
Co-authored-by: Ryan <fauxpark@gmail.com>
* Reverted make flash
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: filterpaper <filterpaper@localhost>
Co-authored-by: Ryan <fauxpark@gmail.com>
* update keyboards/helix/pico/keymaps/mtei/keymap.c
Stopped using the LAYOUT_kc macro. (this is response to #12160)
There is no change in the generated binary.
* small update pico/keymaps/mtei/keymap.c
This keymap for ANAVI Macro Pad 2 contains popular git commands
typed out and executed with a single key:
- left key: git commit -s
- right key: git push
Signed-off-by: Leon Anavi <leon@anavi.org>
* Add suspend wake functions for RGB Matrix
* Add suspension RGB functions to Planck/rev6 and Preonic/rev3
* Add suspend wake to Mark 65
* Revert changes to planck and preonic
* Remove changes to The Mark65
Co-authored-by: filterpaper <filterpaper@localhost>
* Improve upon the 'Caveats' section of the Layers and Mod-Tap documentation
* Update docs/mod_tap.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update docs/feature_layers.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update docs/mod_tap.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added a line saying that remote desktop problems may also be mitigated by defining TAP_CODE_DELAY
* Update docs/mod_tap.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add a command to format json files
* change to work after rebase
* add test for qmk format-json
* add documentation for qmk format-json
* Update lib/python/qmk/cli/format/json.py
* initial rgb driver fix
* added underglow LEDs and fixed typo in RGB locations
* removed test code
* added my key maps
* updated rgb keymap to work with changes
* refactored my code to make it more maintainable and updated keymaps.
* added GPL licence
* Turned off matrix scan rate debug info
* added checks if RGB matrix is enabled to fix errors when building keymaps without RGB matrix enabled
* Apply suggestions from code review by fauxpark
Co-authored-by: Ryan <fauxpark@gmail.com>
* Renamed led driver file to be less ambiguous
* Renamed is31fl3733 driver files to is31fl3733-dual
Co-authored-by: Ryan <fauxpark@gmail.com>
* Fix USER_PRINT on avr/atsam
* Update tmk_core/common/arm_atsam/_print.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Format code according to conventions
* Update lib/python/qmk/cli/generate/api.py
* Update lib/python/qmk/cli/generate/api.py
Co-authored-by: QMK Bot <hello@qmk.fm>
Co-authored-by: Zach White <skullydazed@gmail.com>
* Add support for qmk_configurator style aliases
* add the keyboard aliases to the api data
* add support for a keyboard metadata file
* make flake8 happy
* [Keyboard] YMDK YM68
Converted from a KBFirmware JSON file provided via the vendor's product listing.
PCB supports Backlight on B6 and RGB Underglow on E2, but the LEDs are not pre-soldered according to the PCB photos.
* update VENDOR_ID and PRODUCT_ID
* Durgod keyboard refactor in preparation for adding additional durgod keyboards
* Moving Durgod board configuration into a common location
* Reformatting layout macro whitespace
* Moving TGUI key functionality to the keyboard level
* Replacing default keymap.c with keymap.json
* Changing default and default_toggle_mac_windows keymaps to LAYOUT_all
* Increasing EEPROM size to support more VIA layers
* Fixing media keys; KC_MRWD/KC_MFFD => KC_MPRV/KC_NXT
* Move ISO Enter key to the correct row in Durgod K320
* Minor whitespace and readme cleanup for K320
* Changing durgod/k320 debounce back to default
* Simplifying DURGOD_STM32_F070's chconf.h
Co-authored-by: Simon Arlott <sa.me.uk>
Co-authored-by: Tyler Tidman <tyler.tidman@draak.ca>
* added Vanana / Vaguette Lite / Waaffle
* changed extra GPIO allocations of Waaffle and Vanana
* Apply suggestions from code review
changed layout name of vaguette Lite / requested by drashna
* Apply suggestions from code review
Requested keymap changes have been made.
* all changes requested by collaborators are made
* RGB config updated / keymap updated
* fixed vaguette lite info.json
* fixed vaguette lite info.json
* fixed vaguette lite info.json
* Apply suggestions from code review
request changes are made
* pre rename h
* vaguettelite reanmed to lowercases
* fixed vanana keymap
* Apply suggestions from code review
* changed Bootmagic key of VaguetteLite as suggested
* Updated via keymap of Vaguette Lite as suggested
* add vaguette lite 6.25 layout
* added vaguette lite noclew keymap
* updated vaguette lite 6.25u keymap description
* updated vanana default keymap
* updated keymap spacing
* reabased from the official repo
* Update keymap.c
fixed vaguette lite keymap
* Apply suggestions from code review
All the requested changes by a collaborator were made.
* updated info.json of Vanana and readme files of Vanana and waffle
* rename LAYOUT_waaffle to LAYOUT_ortho_5x16
Also adjusts the info.json data to put a visual gap between the extension and main PCBs.
* make rules.mk and info.json specific to rev3
Removes nckiibs/waaffle as a build target, as it redirects to the only extant revision in the repository.
* add controller board build targets
Adds build targets for Pro Micro and Elite-C builds, with appropriate defaults for each.
Running `make nckiibs/waaffle/rev3` defaults to a Pro Micro-based build.
* fork rules.mk to be version-specific
* remove pimentoso/paddino02 as a keyboard target
This commit makes it so QMK API doesn't identify pimentoso/paddino02 as a build target on its own, because there's no actionable code here.
* add image to readme.md
* unify rules.mk files to QMK AVR template
- remove Bootloader selection comment block
- sort Build Option rules
- unify inline comments
Recent changes to QMK Configurator's API have made it so an info.json file is required for QMK Configurator to know how to render the keyboard in question.
This PR adds info.json files for keyboards that did not have them, with a few exceptions for boards whose layouts I was unable to determine.
* add info.json file for 2key2crawl
* add info.json file for 40percentclub/4x4
* add info.json file for 40percentclub/5x5
* add info.json file for 4pplet/aekiso60/rev_a
* add info.json file for 4pplet/steezy60/rev_a
* add info.json file for 6ball
* add info.json file for 7c8/framework
* add info.json file for aeboards/constellation
* add info.json file for alpine65
* add info.json file for aplyard/aplx6
* add info.json file for arch_36
* add info.json file for arisu
* add info.json file for box75
* add info.json file for butterstick
* add info.json file for four_banger
* add info.json file for geekboards/tester
* add info.json file for handwired/2x5keypad
* add info.json file for handwired/412_64
* add info.json file for handwired/42
* add info.json file for handwired/aplx2
* add info.json file for handwired/brain
* add info.json file for handwired/cans12er
* add info.json file for handwired/ck4x4
* add info.json file for handwired/d48
* add info.json file for handwired/dactyl_manuform/dmote/62key
* add info.json file for handwired/daishi
* add info.json file for handwired/hexon38
* add info.json file for handwired/jot50
* add info.json file for handwired/jotanck
* add info.json file for handwired/jotpad16
* add info.json file for handwired/k8split
* add info.json file for handwired/myskeeb
* add info.json file for handwired/nicekey
* add info.json file for handwired/onekey
* add info.json file for handwired/postageboard
* add info.json file for handwired/riblee_f401
* add info.json file for handwired/riblee_f411
* add info.json file for handwired/rs60
* add info.json file for handwired/splittest
* add info.json file for handwired/trackpoint
* add info.json file for handwired/traveller
* add info.json file for hhkb_lite_2
* add info.json file for honeycomb
* add info.json file for ivy/rev1
* add info.json file for keebio/viterbi
* add info.json file for laptreus
* add info.json file for latin47ble
* add info.json file for latin64ble
* add info.json file for launchpad/rev1
* add info.json file for lets_split_eh/eh
* add info.json file for mechmini/v1
* add info.json file for meira
* add info.json file for meishi
* add info.json file for merge/iso_macro
* add info.json file for mschwingen/modelm
* add info.json file for pabile/p20
* add info.json files for pimentoso/paddino02
rev1, rev2/left, and rev2/right
* add info.json file for rgbkb/pan
* add info.json files for runner3680
3x6, 3x7, 3x8, 4x6, 4x7, 4x8, 5x6, 5x7, and 5x8
* add info.json file for sck/gtm
* add info.json file for splitish
* add info.json file for standaside
* add info.json file for ungodly/launch_pad
* add info.json file for xelus/trinityxttkl
* Revert "add info.json file for rgbkb/pan"
This reverts commit 280b89bc61.
* correct maintainer for ivy/rev1
* Fix keycode mappings for via and ensure they don't change within protocol
* Update keycodes
* Fix broken keyboards
* added the missing keycodes found in via
* Remove invalid keycodes
Co-authored-by: David Hoelscher <infinityis@users.noreply.github.com>
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* Convert to config
* revert changes
The code was moved to the "ferris" directory.
Fixes the following commands:
```
qmk compile ~/qmk_firmware/keyboards/ferris/keymaps/default/keymap.json
qmk compile ~/qmk_firmware/keyboards/ferris/keymaps/pierrec83/keymap.json
```
Addresses this issue:
https://github.com/pierrechevalier83/ferris/issues/5
* add support for Bbm68rgb
* pull request changes filled
* pull request changes filled(this time for real)
* added new line to files that did not have new lines at end of file
* updated modifier keys for rgb effects
* Update keyboards/bm68rgb/readme.md
* Apply suggestions from code review
* Apply suggestions from code review
* add nkro suppport
* Update keyboards/bm68rgb/rules.mk
* modified keymap to better correspond to physical layout
* updated comment style
* Adding Files for Zodiark
* zodiark.h and keymap.c layout corrections
* Apply suggestions from code review
Applied all suggestions from zvecr.
Co-authored-by: Joel Challis <git@zvecr.com>
* Applied all suggestions from fauxpark
Co-authored-by: Ryan <fauxpark@gmail.com>
* Defined matrix driver
* Update keymap with GPL2
* Added GPL2+ to All keymap.c, cleaned up config.h, and removed the rgbmatrixwip keymap
* Apply suggestions from code review
Removed the two lines from the config.h and changed to the smaller resolution picture on the Readme.
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added VIA keymap
* Corrected VIA Keymap oled.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Because the matrix scanning is slower for splits, in general,
the frequent updating of the OLEDs can slow down the matrix scanning.
To help prevent that, set the update interval for the OLEDs to not
update as frequently.
* Added boston keyboard
* Added Boston keyboard
* Changed some keycodes, added layers, added encoder layer change, added RGB layer indicator
* Cleaned up whitespace
* Update config.h
Cleaned up whitespace
* Cleaned up whitespace
* Added keyboard_post_init_kb code for RGBLEDs so that they start on a defined color
* Modified layout so that split backspace right is at a more intuitive location for configurator
* Cleaned up whitespace, changed some labels
* Modified keymap to accommodate revised layout in boston.h
* Removed "on port C6" from Line 20 (committed suggestion)
* Removed "Encoder Enable" from Line 8 (committed suggestion)
* Removed empty #define DESCRIPTION as suggested
* Implemented lock LED changes as suggested by drashna
* Implemented lock LED changes as suggested by Drashna, changed WS2812 driver byte order
* Updated HSV color codes to reflect WS2812 byte order change
* Implemented suggestion from noroadsleft
* Implemented suggestion from noroadsleft
* Updated readm.md per suggestions from noroadsleft
* Update keyboards/boston/readme.md per noroadsleft's suggestion
* Removed empty layers from default keymap
* Stripped empty layers and much code from default keymap ; moved to RGB Light Layers keycap
* Support for XO87 solderable version
* cleanup
* Remove abandoned code
* replaced KEYMAP with LAYOUT and moved LAYOUT macro to solderable.h. deleted unneeded files.
* Update keyboards/monstargear/xo87/solderable/keymaps/via/keymap.c
* update info.json with missing keys
* Apply suggestions from code review
* Apply suggestions from code review
correct layout macro
Keymap Minivan: configurable dual layout, many symbols, speed/text-size measuring
* Made center led color follow last activated layer color. Some led code clean up
* Reordered the _RAR layer, also putting GUI on the _ACC layer.
* Some issue with _FUN (see keymap.c FIXME), removed _FUN nested 'go to layer' key on _FUN.
* markdown formatting
* Update readme about _FUN top row issue (see keymap.c at XXX)
* Sentence order final bit was wrong by topic. White space fiddles.
* Minor comment editing
* minor comment adjustments
* leds are not modifiers, moved
* _FUN persistance on base layer only (XXX)
* The up/left to go to _LTR layer, now always goes to BASE (_LTR or _DDL).
Led indicators refldect this. No _DRA hold on base layer but _ACC. No
one shot to _FUN layer (seemed to make things confusing), but a TO().
* Some chatter about how to configure this map to your needs.
* language fixing
* Tried to make sense explaining how to access the descramble.
* language fix
* Seems there was a stale CSET_LTR/.*DDL, should be BASE_LTR/.*DDL, fixed.
* language, blabla
* Corrected stale _LTR into BASE
* Some documentation finetuning and trying to make it simple to understand
* language fixing
* language fixing
* Doing the utmost to explain it in a way I understand it too.
* language fixing, going ultra-verbose
* language fixing and formatting
* language fixing
* language fixing, formatting
* attempt to simplify explanations as much as possible
* added License to keymap.c (GPL), noted that _ACC and _DRA need work to
function in 'descramble' mode
* fixes regarding layer order, adding two layers, started on descramble
layers for _ACC and _DRA Unicode
* Noted some coming changes about F-layer and more descramble.
* changed globals to type 'bool'
* Changed F-layer by removing pre-modifier F keys, moved BASE direction
switches, added new incomplete descramble layers
* _FUN layer changes (comment fix)
* Led color fixes. Changed order of layers in the source (no user consequence).
* Added copyright authors (hope that is correct in GPL style/requirements).
* Switched on BASE layers the keys to activate _MOV with leftside _NSY:
more harmoneous, and _MOV can also be held by right hand.
* Follow Quantum indentation style more (mostly).
* On _NSY & _DDN, Tab follows _LTR. '-' moved to LShift, '.' moved, ','
created, shift(tab) removed.
* Added Linux Unicode input mode Accented characters on layers _DDA, _DDD
* added to Todo
* Added ijIJ to _ACC and _DDA layers (2nd last letter of Dutch alphabet).
* add todo point about navigation, fix -> "8th key"
* added 「」《》 to _DRA and _DDA
* Added 〇, ƒƑ. Altered Nav clusters with paging on outside, added thumb Page up/down to _MOV, brought _REV in line with recent _NSY changes (tab,-,enter,dot,comma). Harmonized tab on _Mov with other layer tabs (also a move command, moving cells).
* Added super- and sub-script for numbers on _DRA, _DDD.
* Added quotation marks „ “ ” to layers _DRA and _DDD.
* Added °〇•· to _DRA, _DDA
* § as an enumeration grouped with • (bullet), · as possibly math (middot or multiply) grouped with ±.
* Changed numbers to be on home-rows both hands, because thumb layer key does
not interfere alternating between hands for longer numbers (previous
reason for one-handed numbers). The unshifted symbols went left 2nd row,
because then the shifted versions can be accessed with shift if the
layout is replicated on a Pok3r (which is non-programmable right hand 2nd row.)
The logic has been harmonized with layers _DDN, _DRA & _DDD, _FUN, which
have number(-like) keys. It seems better this way. The symbols are layed
out more spaciously, each finger now does two symbols (2nd row, 4th
row). The numbers are more like they normally are, which feels more
natural, and should even the load between both hands and help with
alternating between hands when typing numbers.
Reason to change was looking into pressing ;, q, j, with ring-, middle-,
index-finger (moved one to the right from default Dvorak), because the
stagger makes it easier to reach that way, less loss of home row contact,
bending fingers more straight up and down. Downside became that left
index type 5 numbers, and that the normal finger matching (0 is pinky,
etc) was lost. With the new layout these potential problems are also resolved.
* Made descramble _DDN, _DDL representation show both raw and resulting layouts.
layouts.
* Added arrows, fleur and heart on _DRA and _DDD.
* Changed _FUN layer switching to incorporate the 'descramble' system
seemlessly. The 4 layer with a descramble twin will switch to either
depending on the descramble mode.
* Descramble mode with normal Unicode layers mostly done, except costum LT() to share the key with Delete/Alt on _DDL.
* Changed descramble mode keys to be just one on a cycle. Added full set
of Alt/Control/Shift multimodifiers to `_FUN` layer.
* Changed descramble mode keys to be just one on a cycle. Added full set
of Alt/Control/Shift multimodifiers to `_FUN` layer.
* format fix
* Descramble cycle key moved from row 1 to row 4 far right, to avoid
accidental press,
* The 'descramble' mode with normal Unicode encoding finished. Fixed
mistaken non-transparent key on _DRA and _DDD, removed tab from _RAR.
* stale layer comment fix _LTR/_DDL
* New layer-tap timed keys proved unreliable, longer tap term fixed it.
* The _FUN layer is a one-shot layer for the F-keys, but that can be toggled by the FUN< key on the _FUN layer (top row, 3rd).
Some additions to the readme.
* Comment improvements (layout tables)
* minor
* Made #defines to allow a user to easily switch to a WASD arrow layout.
* Added keys to switch leds on/off, to _RAR layer. Fixed wrong comment on 'APP' key in _RAR.
* comments fix regarding MLed, SLeds
* Added BASE to same key as _FUN on base layer, except layers with numbers/symbols.
Removed capital ƒ, and moved ± to that key. Added … on old spot of ±.
Some readme language editing, adding something about other keyboards, etc.
* small language fix
* Config.h: Removed unused #defines.
Readme: minor edits.
* minor language edits.
* Minor comment edit.
* Minor language fix.
* Minor language style edit.
* Removed unnecessary section 'personal remarks'
* Changed the top row in _DRA and _DDD. Super-/sub-script parenthesis to that location on _NSY, added currency symbols, reduced emoticons.
* minor formatting
* Added LGUI and RGUI on the _DRA/_DDD layer(s).
* Put RGUI on the base layer, on the _FUN layer switch key. This probably causes side-effects on
systems without where RGUI is not merely a modifier.
* Changed _FUN toggle on BASE to Rshift, because RGUI on some systems has a consequence when tapped by itself.
* Changed LGUI and RGUI around because LGUI is mostly used and on BASE layer. Some edits to last part of readme.md.
* Minor language fixed (L/R-GUI, use-case).
* some more blabla on use case of the map generally
* Changed name KC__[LR]GUI to KC__[XY]GUI for clarity wrt switching them.
* Removed left-arrow on Alt on _ACC and _DRA, for faster use with pointer device.
* Added the same system as is on RShift, to LShift, pointed it to _MOV layer.
* Changed left shift layer toggle to _DRA, because it has uncluttered shift, alt, control, for using those with a pointer device (mouse, stylus).
* Changed base layer left-shift tap from _DRA to _MOV, because _MOV toggled can be convenient generally, and it is a less dangerous layer to accidentally press, and it makes more sense to activate the navigation layer when editing in 3D software.
* The Power keys on _RAR now require Shift to be activated (accident prevention).
* fiddled with title
* more title fiddles
* Added RGUI on _FUN for future proofing the layout, harmonizing layers.
* Added ',' on _REV (number fraction division). Minor fix to documentation format.
* title fiddle
* Added LGUI, RGUI to _RAR, to harmonize with other layers and for potential future uses.
* Changed unnecessary transparent keycode on _AcC and _DDA to be 'nop', minor comment fixes.
* Added on _DRA and _DDD: ─━┄┅.
Fixed a bug in led layer colors (forgotten 'else', causing wrong color for _DDD).
* Some changes to conform to QMK readme.md standards (more necessary).
* Changed _REV into a numbers pad layer called _PAD, put on Lshift in BASE.
_REV layer (not used anyway) replaced with a layer that is basically
a layer where symbols that exist on _NSY (mostly) and on _LTR (few)
are existing in the same locations, but in the number pad variant of
that symbol. The goal is to make it easy to find, it is not meant for
single hand access quickly. The use is to deal with special shortcuts
like Blender has, which differentiate normal and numpad numbers/symbols.
For quick access it was put on the left shift in BASE layer.
* Added navigation arrangements to _PAD. Changed location of shift on _RAR.
The numbers on numpad are easy to find, but when these keys are in their
navigation variant with numlock on it becomes almost impossible. There
was room on the map to add an arrow row, and a row for the remaining
navigation keys, hence they where added. They are in a left handed
order, because there already is a right handed order on _MOV.
It still proved possible to accidentally trigger Power, due to erroneous
hitting 'shift' in BASE and then messing around by accident. With shift
on (BASE) space in _RAR, accidents should be reduced further, since it
is a combination never used.
* Added Tab on _ACC and _PAD
To facilitate Control-Tab (a blender shortcut). On _ACC the Tab is in its
correct place. On _PAD it messy because not on its correct place. Leaving
it there for now: easier to access Tab+Control with left hand only on the
modifiers in _PAD, and other hand on a pointer device. Tab has a potential
use to jump input cells, which may be used in combination with a numpad.
* _MOV layer: switched default layout to trangle navigation layout.
This only required to set the already existing #defines. I found
the flat layout not intuitive, the triangle layout has no left/rigth hand problem.
The higher buttons for the mouse where not correctly ordered, so they where re-ordered.
* Triangle navigation by default. Added pictures of layout to readme.md
* Layer names on images.
* Changed image for layer _DRAW slightly.
The shifted symbol to the lower right.
* Image for _PAD corrected for no-action and Tab.
* Added a paragraph about why this layout is good to use.
* removed 'modifiers' paragraph
* Some text improvements in paragraph on what is good about this layout.
Fiddle on the title as well.
* Added Del on _DRAW layer.
Some minor text fiddles here and there.
* Removed word "descramble" in image layer _RAR.
* Improved key 'sticky' and altered image size (test).
* Rescaled image for layer FUN
* Unicode in its own file. Bug fix: _DDA 'ï' printed a capital.
Upon a suggestion from QMK Discord #programming, the macros and
unicode is put in a separate file, because keymap.c got large.
An erroneous numerical value for ï was fixed.
Author e-mail is updated to a new e-mail adres.
* Added an image to illustrate 'descramble' mode.
* Changed explicit e-mail to link, to reduce spam bot trolling.
* Added a Qwerty+Dvorak compile time version.
It seemed the overall design (accented, Unicode, stuff) could be useful
for Qwerty typers (of which there are so many). This was done by #if(n)def
out/in a fair amount of code here and there, and creating 4 replacement
layers in a new file qwerty_dvorak.c, also with its own readme in
qwerty_dvorak.md. The 'descramble' switch system is re-used here to
switch from Qwerty to Dvorak.
The new code is put in qwerty_dvorak.c, which starts with an extensive
comment about why and how it works.
Fix: Docs, a stale "_MOV" was replaced with "_PAD" in the readme.md for _DDL.
* Changed image hosting.
Downtime, problems registering: resorting to my own domain.
* minor text order changes
* Some text improvements.
* Added a compile option to easily change what layer is active on startup.
This layer can be plain Dvorak or 'descrambled' Dvorak, if
QWERTY_DVORAK is not set. It can be Qwerty or Dvorak if it is set.
Just some simple #define statements.
* Added graphics for Qwerty+Dvorak, and improved documentation.
Added the whole set of layers also to qwerty_dvorak.md, because
it seemed it would get even more confusing to have a user cross
reference it between the two files.
* Some simple text improvements
* Numbers/symbols layer keys on BASE to DRAW when both pressed.
The two keys besides the space bars go to DRAW layer when pressed
simultaneously. (This is inspired on the Planck's 'adjust' layer,
pressing both 'lower' and 'raise' together.) All layers can now
(relatively) comfortably be reached. This change was necessary
because it was cumbersome to reach the DRAW layer with the right
pinky and then type with the right hand. _RAR is now not super
easy, but it is a 'rare' layer anyway.
* Added compile + flash section in readme.
* Corrected documentation: 'mouse on ... hand'
* Removed up/down arrow ⮙⮛ on _DRA and _DDD, because the hex file was too large.
Due to pulling the master repository, changing nothing in this keymap, the
code compiled as 2 bytes too large, where before it had been 2 bytes left free.
Some compile options have been created, to make it easy to cut out up/down
arrow on the 'descramble' _DDD layer, and/or the normal _DRA layer, and/or
dashes ┄┅ on the 'descramble' _DDD layer. The 'normal' layer cut out of arrows
yields little benefit, but it keeps all layers exactly the same between 'descramble'
and normal mode. For Qwerty compilation, you will want to not cut out anything,
requiring to edit the user compile options in keymap.c (top).
* Resolved size issue with QMK #defines, re-instated ⮙⮛, removed RGUI on _FUN.
Various #defines tested to reduce space, NO_ACTION_MACRO NO_ACTION_FUNCTION
worked. Therefore the cutting out of the up/down arrows was no longer
needed. The #defines to easily remove them have been left in place.
RGUI made _FUN confusing with the multi-modifiers, thus taken out. Multi-
modifiers now logically cascade without skipping a key.
* Improved image files with led colors and some tweaks.
* Updated graphics file for Dvorak in QWERTY_DVORAK compile option.
The led colors where not correct because the graphics for standard
Dvorak was being re-used.
* Fixed for re-instating arrow up/down for space.
* Activation marker on _FUN layer in documentation altered.
It looked like it was a symbol.
* Made startup layer explicit in code.
Startup layer follows 'descramble' on/off user #define setting.
* Marker for BASE activation for _PAD, _MOV: fixed.
There was a stale marker in the documentation layouts for _MOV: removed.
The same marker for _PAD was improved.
* Code optimizations suggested on pull request #8066https://github.com/qmk/qmk_firmware/pull/8066
Some things moved to config.h, rules.mk
Changed layer_on/_off to layer_move(..)
Removed a global variable, changed literal type on a function.
Code is now a lot smaller, hence removed readme.md entry on that.
Removed "not shown" on 'descramble' leds in qwerty readme (mistake).
* Compile option to change ƒ into €.
Since it's a west european keymap, maybe someone likes the euro currency on it.
(It was not on it because I don't like ...)
* default to ƒ on keymap
* Removed print sheet for layout *.odt file.
Changing this to text/markdown seems to reduce the use of this file
to a point that it may be better to delete it. There is also the
graphics now, which might be better to print.
* Updated the seller/maintainer of the board to: The Key Dot Company LLC.
https://thekey.company/blogs/blog-updates/thekey-company-acquires-minivan
* Changed external links to website to plain text.
The markdown link is caught by the github cammo system.
* Last free spot on the map made easy to configure.
One spot was still free (Unicode _DRA/_DDD layer). This puts a #define
on top of unicode_macros.c, to make it easy for a user to put in their
own symbol.
Put placeholder 🛠 in there. That symbol is not represented in the
documentation (maybe it should, it is a nice symbol).
* Removed space saving #defines.
These became obsolete clutter, now that there is enough space thanks to
LINK_TIME_OPTIMIZATION_ENABLE.
* Added tokens to simplify compiling for 45/46 keys.
An attempt to make it easy to switch on a #define between
various hardware configurations (44, 45, 46 keys) failed.
This: #define J1 , KC_A // seems to have failed to be
recognized as a key definition.
error: error: macro "LAYOUT_command" requires 45 arguments, but only 44 given
Left in are some code tokens (J1-J4) and #defines that need
at least bulk replacement in keymap.c and optionally qwerty_dvorak.c,
to compile for such hardware configurations. It would be nice
if this could be done better.
* User can easily compile for 45, 46 hardware keys.
Added some #ifdefs around optional keys in the keymap, to allow
compiling for 45 and 46 keys. Left the earlier made code with the
J1_J2 etc. tokens, which could still be used to port the map to
a board with even more keys. This fixes earlier mentioned problem.
* Arrow cluster for 'arrow' hardware configuration.
This is a user configurations option in the keymap.c, to have
an arrow cluster around the additional key for 'arrow' hardware.
The arrow cluster is however not on the base layer (no room). The
additional key is used to switch to the _MOV layer. There it becomes
a down arrow in the arrow cluster.
To make this work with the default _MOV layer, the right hand
keys on the 2nd row where moved one spot to the left, for the 'triangle'
arrow configuration (mouse right). This is a trivial change.
There was a bunch of language improvements to the documentation,
including graphics.
The symbol 🛠 is now listed.
The program seems to be reliable, as far as used and tested.
* Correction of mark-down formatting.
_MOV layer 'arrow' cluster documentation rendered incorrectly
(attempt to add newline).
* Markdown formatting mistake correction.
Adding a newline at 'Layers (text)' chapter.
* Moving the graphics about 'arrow' to topic.
The graphic explaining what 'arrow' with arrow cluster means,
should be where that is mentioned under compile options.
* Editor token J3_J4 moved to avoid arrow cluster.
If one wants to insert a key by bulk replacing J3_J4, and has
activated the 'arrow' layout arrow cluster, this new key would
be inside the arrow cluster, hence it was moved to the left.
* Æstethics of image 'arrow' layout, arrow cluster.
Shading corrected/nicer.
* Corrected image link in readme.md
Illustration 'arrow' layout, arrow cluster.
* Fix: Toggle to BASE layer leaked. South-paw key.
When toggling to a non-BASE layer, either on the _FUN layer or
using the 'arrow' cluster for 'arrow' layout, on the BASE layer to
toggle to _MOV, the layer changed on the down-stroke, causing a
character to leak. These layer switch macros now alter layer on the
up stroke.
There seems to have been an accidental code deletion: #define MORE_key1.
This defines what the additional hardware key for 'South Paw' ('Command')
should be.
* User compile option comments easier to read.
The phrases "uncomment" and "comment out" are confusing.
Replaced by _activate_ and _remove_.
* Put user compile options back to default Minivan.
Accidentally left the compile options for number of Minivan keys
in the wrong state while git pushing.
* Rewording a comment in the user compile options.
Clearer language.
* Leds indicate Caps/Num-lock.
Leds green/blue switch depending on numlock for numbers-pad layer _PAD.
BASE layer led brightens when capslock is on.
* _PAD had the wrong period, fixed.
_PAD layer had the KC_DOT instead of KC_KP_DOT.
* Options for navigation keys arrow hardware key.
Compile options added to have a complete navigation cluster around
the additional hardware key for 'arrow' layout, both for triangle
left handed arrows and flat right handed arrows.
* Added _FUN layer in text Qwerty.
_FUN text layer was by mistake missing/deleted in the qwerty-dvorak readme.
* Added graphical visualization of all layers.
* Graphics: _RAR 'Capslock', _NSY '~' corrected.
Text representation of layers was correct, graphics corrected.
* Compile Option arrows in a vi(1) editor layout.
Vi(1) is a much loved editor, with its own peculiar arrow layout
on HJKL (as it appears in Qwerty). It seems possible some Qwerty
vi users might find it fun this way for regular arrows as well.
The 'arrow' hardware layout, compiled with arrow cluster, follows
the vi(1) arrow arrangement.
* More layer overview graphics files for the readmes.
Added a '40% x 400%' to the 3D layer overview image (top).
Added overview of all layers in a readable way (Dvorak² only).
Added a guide to show where what is similar on layers. This should help with learning.
Added a graphic showing what key activates what layer.
Added graphics that show what layer subsets are active in certain modes (Dvorak² and Qwerty/Dvorak).
Fixed mistake: _Tab_ missing in layer `_PAD` graphics file.
* 'Tab' inserted in overview graphics for _PAD layer.
* Corrected mistake in similar layer keys.
LGUI on _ACC
* Added overview graphics for Qwerty/Dvorak.
Overview of layers, similar keys on similar layers, activation.
* Compile option to change ⮘ ⮙ ⮚ ⮛ into ☐ ☒ ☑ 🗹
Layer _DRA, _DDD. Checkboxes seem handy for lists. Set default on in
keymap.c. Pointers seem rarely useful. Right arrow sometimes as a bullet
point marker. All affected graphics updated.
* First overview image correction.
Last layer is not 'symbols' due to its numbers.
Some art improvement.
* Minor tekst correction (author Minivan config).
* Short features overview and git lib fix.
* note⁴ as example
* Improvements all over the place.
The keymap is now modular dual layout. There is a common system,
and there can then be two letter/numbers layer pairs be compiled
with it, which are separately defined and documented in ./bases…
files.
Speed measuring and text size counting added.
There is an additional Unicode layer, for a total of three.
The “descramble Dvorak” layer is now just a function, as was
originally intended.
* Wrong link to Dvorak manual, stray ‛r’ character.
* Splitting the layouts so they are not pairs of 4.
The layers had been configurable only as a set of a BASE and letter
layer with another BASE and letter layer: Dvorak + Dvorak² and
Qwerty+Dvorak.
Now Dvorak, Dvorak² and Qwerty can be individually configured, to
be on either the Default or Alternate spots in the dual layout
(Dvorak² only supports Alternate, due to its “_HALF_ descramble” mode).
* Added Colemak layout.
Some tidying up of documentation wrt DEF/ALT base layer identifiers.
Fixed missing ‛:’ on the graphics for Qwerty.
* stale letter
* fix modified submodules
* removed redundant code
testing twice for non-zero
* Speed measuring precision fix.
The calculation of “int speed;” caused great loss of precision.
* Added overview of layers by key.
Makes it easier to see the associations of meanings per key.
* Dvorak descramble by key overview
Forgot to add.
* Minor readme format fiddle.
* Graphics: blank keys are grey, fix one mistake.
* Compilation as a single layout.
Layer definitions _ALT_BASE and _ALT_NSY (enum) are simply #redefined
as preprocessor numbers equal to _DEF_BASE and _DEF_NSY (see user_config.h,
lowest reference to MINIFAN_SINGLE_LAYOUT).
* Single layout compile option
See user_config.h lowest reference to MINIFAN_SINGLE_LAYOUT for the why of the how.
* RShift toggles to _RAR when held ≥ 500 ms.
“Qwerty with arrows on BASE”, will need a key to _RAR layer.
It mirrors the behavior of LShift. It is generally useful.
Removed useless user options regarding LShift layer toggle.
It will have to be _PAD.
* Layer switch graphic update per last push.
Forgot to update the default base layer switching graphic.
* Preconfigured optional ‛Command’ hold key to _RAR layer.
This is a third way to reach the _RAR layer, useful if the furthest
right key on row 1 is changed to an uncluttered BASE layer arrow.
This further prepares the way for a Qwerty layout with arrows on BASE.
* Changed ‛Command’ hardware key to TG(_RAR)
MO(_RAR) doesn't work, because it doesn't follow a change in base
layers, which happens on _RAR.
* Corrected wrong all-layers-by-key upload readme.md
* More graphics = more fun: keycap view in readme.
Preparing to integrate a number pad base layer.
Shortened hold time for right/left Shift layer toggles to 200 ms.
* Too light grey for “1470” on three layout graphics.
* Added a numbers pad Base layout option.
This numbers pad layer is in the format of a numbers pad keyboard/cluster.
It has a second layer, which is normal for all Base layers. In this case,
the second layer provides sub-/super-script versions of the numbers, in the
same layout.
* Keycap view numpad improvements.
* Graphics: forgot to cut off southpaw/arrow on two keycap views.
* Preprocessor identifier for “MIT” Planck spacebar.
Trans-minivan preprocessor statements augmented with an identifier
which might work for a Planck keyboard with two unit spacebar.
At this point, the “trans minivan” code only could make porting
to other keyboards less of a chore. It remains untested. Only
visual inspection of the preprocessing regarding the amount of
keys in the layout has been done.
* Tweak of common layout graphic impression.
This would also allow indication of a number pad.
* Improved dual numpad layer & graphics.
All numbers/symbols seem to get affected by NumLock, hence they
all needed to show that in the graphic documentation. Tab was
removed in favor of Numpad ‛=’, and comma replaced by numpad-comma.
* Committing partial job on numpad Base layers.
Hardware problem here, don't want to loose the data.
* Three issues: header file, numpad Base, Tab key.
This should complete previous unexpected commit.
① Documentation and precedent for a base layer with its own header file,
base_NAME.h. This allows someone writing a new Base layer pair, to
(un)set user configuration options in user_config.h.
② Numbers pad Base layer added, different variants.
The common numbers pad also has a new optional layout (square), and can be
removed by user configuration option (because one might already compile with
the Base layer numbers pad)..
③ It turns out there was an easy solution to the Tab key anomaly.
Uncluttered Tab is now located both on BON and ACC layers, on intuitive
locations opposing Control, which is also in the right spot. Basic
modifiers for Tab works well now.
* Graphics for Base numpad single square: correction.
Showed wrong insertion key for 'command' / 'south paw' hardware key.
…
* ‛South paw’ default GUI. Graphics. TOC user config.
Made ‛south paw’ be GUI by default.
Improved graphics appearance.
Ordered options in user_config.h, added table of contents.
* User config cleanup & added a compact alternate.
The normal user configuration, which is heavily documented and
therefore a bit unwieldy, can now optionally be done in another
file, without any documentation.
* Base graphics fix, _ACC/_NSY hold switch option
* Added a Qwerty with arrows on base.
Added a graphic in readme for Dvorak descramble (for documentation predictability).
* Put `~ on the _BON layer.
① There was no uncluttered `~ available. On Qwerty Base Arrow
the `~ key got even more sidelined.
② Improved Qwerty Base Arrow manual.
* Option to harmonize Qwerty with Qwerty Base Arrow
Key ‛/?’ is different on Qwerty Base Arrow, which will lead
to typing arrows for people who have both kinds of Qwerty
running. This option adds this key in the same spot as where
it is on Qwerty Base Arrow, but only if Qwerty Base Arrow is
being compiled.
* See previous commit (Qwerty harmonization)
* Efficiency fix. +Workman layout.
Workman layout added.
Serious efficiency mistakes discovered and fixed:
① There was no check on Delete on Base layer, to see if another
key had been pressed. Fixed.
② The Shifts on Base did not provide a Shift for the _BON layer
accented characters. Fixed.
Fixing was painless, proving the code is stable and maintainable.
* Changed Tab/CTL on _ACC/_DRA, μ, T.O.C. readme.md
μ was forgotten (French), added on _ACC.
This caused Tab to get displaced and stacked with Control, which
ends up being better anyway. This also meant _ACC needed Left-Control,
and therefore _DRA needed to switch Tab and Control, because it needs
to complement _ACC with Right-Control (to be able to type all modifiers
with Tab).
➡ Overview graphics are not yet updated. _DRA and _ACC are now out of sync
in the graphics documentation. To be fixed soon.
Chapter on language support added in readme.
Table of Contents added to readme.
* Updated all graphics (_BON/_DRA Tab/Control/μ).
Some fiddles with readme.
* Led on/off at startup, RAlt on Base option.
It is hard to believe, but the todo que seems empty!
* Minor changes in readme.
* Minor documentation improvement (RAlt/_RAR).
* Minor changes readme.
Removed “not tested yet …”, because that becomes wrong once it is tested.
* Added a blank keycaps graphic.
* Lower saturation letters Dvorak-descramble keycap.
;-]
* One key change in personal keycap graphic.
;-]
* Forgot _NSY layer in keycap qwerty basearrow
* Moved speed/count startup setting in user_config.h
Moved to chapter startup settings.
(These last commits are more like some loose ends with the last
ongoing topics. It isn't active development, nothing new gets
started. If QMK requests more changes, even if it is a typo,
just let me know.)
* Travis Cl: “The LINK_TIME_OPTIMIZATION_ENABLE flag…
… has been renamed to LTO_ENABLE.. Stop.”
Changed it.
* Adds a link to external resources in readme.
A place to put gimp .xcf files if someone wants to
modify/port the keymap. Perhaps links to varieties
of Minifan on github. Maybe a video about the keymap,
and such. Stuff that doesn't belong/fit on github,
and is easy to update without pull requests.
* RGBLIGHT_ENABLE rules.mk fixed, leds off for nop
rules.mk RGBLIGHT_ENABLE can now be set to “no” without issue.
Compile option to have leds off in Default Base layer.
* Transparency bug fixed.
Default layer was not set. This remained a hidden mistake, until Qwerty
Base Arrow had a different layer hold key in one place.
* Graphics doc correction, L/Rshift toggle config
Qwerty Base Arrow fix: Keycap view showed unneeded and empty ‛South Paw’ key.
All layers by key shows 45 Minivan version, title said “44”.
Added user configuration options to alter what is on the short and long
toggle on Left and Right Shift.
* Improved “why this layout” in readme.
Wanted to add that numbers & symbols layer can be reached by both
thumbs. It seems quite a drawback if that is not possible, to
constantly need to hold down the same thumb, especially for programming ?
It seemed worthwhile to mention.
* Reduced size of readme, dvorak-descramble, todo.
Stuff got a bit out of hand.
* one letter typo
* renumbered readme, _fun_stay initialization
Renumbered readme chapters to start from 1 not 0. Other minor edits.
Sticky on/off for _FUN layer seemed to be unpredictable on startup.
* Letter Ñ (capital) fix.
I seem to remember messing with this recently,
must have damaged this letter :-(. Capital was missing.
* Bare bones base numpad all layer by key.
I seemed to have forgotten to hide the common layers for this version.
Which doesn't matter a whole lot but this is a bit better and as it was meant.
* Fix triggering of adjust layer in default lily58 keymap
* Remove unused extern
* Swap raise/lower in update_tri_layer_state call to match recommendation in PR checklist
* Modified tmk_core/rules.mk to avoid linking errors
Added -fcommon flag to avoid linking errors due to multiple variable definitions. Though this is neither a definitive nor good solution, proper changes and use of extern keyword to avoid those multiple definitions must be made
* Comment updated
* Initial refactor of ARM SLEEP_LED to enable more platforms
* fix build issues
* Disable SLEEP_LED for boards with no caps lock code
* Enable GPT14 for boards with caps lock code and SLEEP_LED enabled
* Enable GPT for boards with caps lock code and SLEEP_LED enabled
* [Keyboard] spiderisland/split78: add MCP23018 reset code
Now, communication with the right side gets re-established
after unplugging it and plugging it back in.
* [Keyboard] spiderisland/split78: configure debouncing
I've been experiencing particularly bad bounce on the 'A' key.
Also, update maintainer github username
* concatenate config.h to 64key directory
* move rules.mk to 64key directory
This commit makes the firmware actually compile.
* insert complete rules.mk contents
Conforms the file to QMK's template.
* move info.json to 64key directory
* remove concertina.h
This file no longer serves a purpose now that everything is in the 64key directory.
* complete 64key readme.md
Conforms the file more to QMK's template.
* VEA Support
* Update LEDs to use QMK methods
* Enable Backlight
* Update Vendor ID
* Updates to enable split RGB
* Update readme
* Update to split RGB
* remove unnecessary reference
* Knight animation starts at the back
* remove hardcoded variable
Co-authored-by: Major Koos <MajorKoos@noreply.users.github.com>
* [Keyboard] Add 'LAYOUT_65_ansi_split_bs' support to KBDfans KBD67 rev2
This is already supported by VIA.
* [Keymap] Fix kbd67 catrielmuller_camilad keymap
* [Keyboard] Add my keymap for KBDfans KBD67 rev2 using 'LAYOUT_65_ansi_split_bs'
* Create Alter folder
* Revert "Create Alter folder"
This reverts commit 361103b821.
* Added n60_s folder
* Fixed the url of the image in the readme
* Updated readme
* Updated readme
* Updated readme
* Added new section to docs: Checking Modifier State
* Added id anchors to all headers in modifiers docs
* Added a Wikipedia link to bitwise operators and...
crosslinked to the QMK macro docs.
* Added an explanation on the format of mod bitmask
* Added .md extension to hyperlinks to macros docs
* Corrected mod mask order and changed notation
* Documented add_oneshot_mods and del_oneshot_mods
* Mentioned modifier checks in the macro docs
* Explained strict modifier checking
i.e. using `get_mods() & MOD_MASK == MOD_MASK` instead of simply
`get_mods() & MOD_MASK`
* Added (un)register_mods to the docs
* Put left term of comparison in parens
* initial rgb driver fix
* added underglow LEDs and fixed typo in RGB locations
* removed test code
* added my key maps
* updated rgb keymap to work with changes
* refactored my code to make it more maintainable and updated keymaps.
* added GPL licence
* add podman support to docker_build.sh script
* break out runtime into the RUNTIME variable
* allows RUNTIME to be set by the user
* decides on docker or podman if docker isn't avaible
* rewrote check for docker-machine to account only for docker runtime
* put --user arg into a variable only to be used with docker
this is not needed with podman as podman maps the containers root id
to the users id.
* add podman to getting_started_docker documentation
* Add suggestion for indirect unicode input on Linux
I have used this approach myself with great success, and it seems to be the only good solution that doesn't involve IBus.
* Elaborate on keyboard layout on Linux
This should be enough to allow people to figure out how to add custom characters to a Linux keyboard layout.
* restore main readme.md
* add ChangeLog entry for 2021-02-27 develop branch - initial version
* update Docs; consolidate sidebar entries to new Breaking Changes History doc
* Changelog update
- concatenate similar changes as one list item
- unify change formatting (remove [bracketed] headings and trailing periods)
- item sorting improvement
* update Changes Requiring User Action section
Detail the changes regarding keyboard relocations/additions/deletions.
* add entry for fauxpark's user keymap cleanup for config.h/rules.mk
* add link to Jacky Studio bugfix PR
* add link for "ChibiOS conf migrations... take 15"
* add links for "Make LAYOUT parsing more robust" and "Massdrop develop rgb fix"
* remove sort sequence numbers
* rename Breaking Changes History page
Renames the Breaking Changes History page to "Past Breaking Changes".
* update schedule in Breaking Changes Overview
* suggestions/changes per tzarc
* skully's changes
* add entry for "Fix develop" (PR 12039)
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Zach White <skullydazed@gmail.com>
Fixes file encoding errors on Windows, and layouts not correctly merging into info.json.
* force utf8 encoding
* correctly merge layouts and layout aliases
* show what aliases point to
PR 10528 was intended to move the source for the Bear 65 and S7 Elephant to the new `jacky_studio` vendor directory. Instead of moving the source files, that PR added the source as if they were newly-supported. The result is that the Bear 65 and both revisions of the S7 Elephant have working, identical firmware in two different directories.
This commit removes the source from the old directories.
* tmk_core/common/report.h: define `enum mouse_buttons` in terms of `#define MOUSE_BTN_MASK()`
* tmk_core/common/action.c: collapse multiple `case KC_MS_BTN[1-8]:` into single `MOUSE_BTN_MASK(action.key.code - KC_MS_BTN1)`
We all love tapping on our keyboards but this is taking the piss.
This saves ~134 bytes on my ATmega32.
ANAVI Macro Pad 2 is an open source mini mechanical keyboard with
2 keys and backlit. Powered by ATtiny 85 microcontroller and with
microUSB connector. Designed with KiCad.
Provides the following keymaps for ANAVI Macro Pad 2:
- Default (with a, b and combo to control the LEDs)
- Copy & paste
- Tap dance example with a, b and c
- Mute
- Volume
- Zoom
- Jitsi Meet
Co-authored-by: Drashna Jaelre <drashna@live.com>
Signed-off-by: Leon Anavi <leon@anavi.org>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Latam version of Helix/rev2/back
. Latam adaptation of keymap(whit "ñ")
. 3 layers (Qwerty, Lower, Raise)
. Underglow light changes while pressing Lower(BLUE) and Raise(RED), then it returns to prior mode.
(cherry picked from commit 974be350115b2d33b55edbc02e3b5281e1f856d7)
* Se añade Keymap.
* Agrego un pdf preliminar del mapeo y reubico el keymap a carpeta correspondiente.
* Ajustes en mapeo para simplificar.
Agrego Mark Down con mapeo.
Creo carpeta "layers mapping" para guardar lo correspondiente a mapeo.
* Update keymap.md
* Rename keymap.md to readme.md
* Organización en general y cambio de configuración de "back" a "under"(que era la que correspondía).
.Ahora los leds underglow responden mejor.
* -Se agrega indicador rgb para el bloq mayús.
-Se agrega manejo del rgb_tog.
-Se agrega botón para reset(del teclado).
-Ajustes de keymap varios.
-Limpieza de código.
* Update readme.md
* Update readme.md
* Update readme.md
* adding helix-keyboard.png
* Update readme.md
* -Se agregan Mouse Keys (para manejo del mouse con el teclado).
-Se hace fix en el modo "Bloq. Mayús" (Se persiste el cambio de RGB mode mientras el Bloq. Mayús está activado).
* Cambios en el Keymap para mayor comodidad del uso del mouse.
* Update readme.md
* Update readme.md
* -Fixeo de comportamiento del "Bloq. Mayús":
Cuando se presionaba una Layer mientras estaba activado Bloq. Mayús, quedaba el rgb_mode como el de la capa LOWER o RAISE.
-Ajuste en mapeo:
Cambié las mouse keys y las de teclas de brillo.
* Update readme.md
* Se borra carpeta /rev2_latam, para dejar todo enlatado y andando desde /rev2.
Esto para que el PR solo sea agregar el keymap "fraanrosi".
* Quito cambio de helix.h
Quito lo que ya no es necesario, para hacer el pull request limpio.
* Update Readme.mp
* Revert "Update Readme.mp"
This reverts commit eb9a2712b0.
* Update readme.md
* Clean up, organization, indent fixes
* Update readme.md
* Latam version of Helix/rev2/back
. Latam adaptation of keymap(whit "ñ")
. 3 layers (Qwerty, Lower, Raise)
. Underglow light changes while pressing Lower(BLUE) and Raise(RED), then it returns to prior mode.
(cherry picked from commit 974be350115b2d33b55edbc02e3b5281e1f856d7)
* Se añade Keymap.
* Agrego un pdf preliminar del mapeo y reubico el keymap a carpeta correspondiente.
* Ajustes en mapeo para simplificar.
Agrego Mark Down con mapeo.
Creo carpeta "layers mapping" para guardar lo correspondiente a mapeo.
* Update keymap.md
* Rename keymap.md to readme.md
* Organización en general y cambio de configuración de "back" a "under"(que era la que correspondía).
.Ahora los leds underglow responden mejor.
* -Se agrega indicador rgb para el bloq mayús.
-Se agrega manejo del rgb_tog.
-Se agrega botón para reset(del teclado).
-Ajustes de keymap varios.
-Limpieza de código.
* Update readme.md
* Update readme.md
* Update readme.md
* adding helix-keyboard.png
* Update readme.md
* -Se agregan Mouse Keys (para manejo del mouse con el teclado).
-Se hace fix en el modo "Bloq. Mayús" (Se persiste el cambio de RGB mode mientras el Bloq. Mayús está activado).
* Cambios en el Keymap para mayor comodidad del uso del mouse.
* Update readme.md
* Update readme.md
* -Fixeo de comportamiento del "Bloq. Mayús":
Cuando se presionaba una Layer mientras estaba activado Bloq. Mayús, quedaba el rgb_mode como el de la capa LOWER o RAISE.
-Ajuste en mapeo:
Cambié las mouse keys y las de teclas de brillo.
* Update readme.md
* Se borra carpeta /rev2_latam, para dejar todo enlatado y andando desde /rev2.
Esto para que el PR solo sea agregar el keymap "fraanrosi".
* Quito cambio de helix.h
Quito lo que ya no es necesario, para hacer el pull request limpio.
* Update Readme.mp
* Revert "Update Readme.mp"
This reverts commit eb9a2712b0.
* Update readme.md
* Update readme.md
* Clean up, organization, indent fixes
* Update readme.md
Latam version of Helix/rev2/back
. Latam adaptation of keymap(whit "ñ")
. 3 layers (Qwerty, Lower, Raise)
. Underglow light changes while pressing Lower(BLUE) and Raise(RED), then it returns to prior mode.
(cherry picked from commit 974be350115b2d33b55edbc02e3b5281e1f856d7)
Se añade Keymap.
Agrego un pdf preliminar del mapeo y reubico el keymap a carpeta correspondiente.
Ajustes en mapeo para simplificar.
Agrego Mark Down con mapeo.
Creo carpeta "layers mapping" para guardar lo correspondiente a mapeo.
Update keymap.md
Rename keymap.md to readme.md
Organización en general y cambio de configuración de "back" a "under"(que era la que correspondía).
.Ahora los leds underglow responden mejor.
-Se agrega indicador rgb para el bloq mayús.
-Se agrega manejo del rgb_tog.
-Se agrega botón para reset(del teclado).
-Ajustes de keymap varios.
-Limpieza de código.
Update readme.md
Update readme.md
Update readme.md
adding helix-keyboard.png
Update readme.md
-Se agregan Mouse Keys (para manejo del mouse con el teclado).
-Se hace fix en el modo "Bloq. Mayús" (Se persiste el cambio de RGB mode mientras el Bloq. Mayús está activado).
Cambios en el Keymap para mayor comodidad del uso del mouse.
Update readme.md
Update readme.md
-Fixeo de comportamiento del "Bloq. Mayús":
Cuando se presionaba una Layer mientras estaba activado Bloq. Mayús, quedaba el rgb_mode como el de la capa LOWER o RAISE.
-Ajuste en mapeo:
Cambié las mouse keys y las de teclas de brillo.
Update readme.md
Se borra carpeta /rev2_latam, para dejar todo enlatado y andando desde /rev2.
Esto para que el PR solo sea agregar el keymap "fraanrosi".
Quito cambio de helix.h
Quito lo que ya no es necesario, para hacer el pull request limpio.
Update Readme.mp
Revert "Update Readme.mp"
This reverts commit eb9a2712b0.
Update readme.md
Clean up, organization, indent fixes
Update readme.md
* Changes and corrections were made to Pull Request.
* Since the last change, readme.md and comment in keymap.c were to be updated.
The initialization of the submodules would succeed, but the result of the subsequent
check_submodules() run wasn't checked correctly.
Co-authored-by: Stefan Schulze <stefan.andre.schulze@posteo.de>
Current wording of IGNORE_MOD_TAP_INTERRUPT is incorrect, and very confusing when attempting to correct a somewhat common issue for quick typists that have Mod-Tap on a commonly used key. Research indicates this wording has been incorrect for some time, and has tripped up others attempting to solve the issue of Mod + Key being sent, when Tap + Key is expected after quickly pressing keys.
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback
changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms
this commits bundles the changes from the arm-dac-work branch focused on audio/audio_arm.* into one commit (leaving out the test-keyboard)
f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both
-> only the changes on audio_arm_.*, the keyboard related parts are split off to a separate commit
bfe468ef1 start morphing wavetable
474d100b5 refined a bit
208bee10f play_notes working
3e6478b0b start in-place documentation of dac settings
3e1826a33 fixed blip (rounding error), other waves, added key selection (left/right)
73853d651 5 voices at 44.1khz
dfb401b95 limit voices to working number
9632b3379 configuration for the ez
6241f3f3b notes working in a new way
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback
changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms
this commit splits off the plank example keymap from commit
f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both
* refactoring: rename audio_ to reflect their supported hardware-platform and audio-generation method: avr vs arm, and pwm vs dac
* refactoring: deducplicate ISR code to update the pwm duty-cycle and period in the avr-pwm-implementation
pulls three copies of the same code into one function
which should improve readability and maintainability :-)
* refactoring: move common code of arm and avr implementation into a separate/new file
* refactoring: audio_avr_pwm, renaming defines to decouple them from actually used timers, registers and ISRs
* refactoring: audio_avr_pwm - replacing function defines with plain register defines
aligns better with other existing qmk code (and the new audio_arm_pwm) doing similar pwm thing
* add audio-arm-pwm
since not all STM32 have a DAC onboard (STM32F2xx and STM32F3xx), pwm-audio is an alternative (STM32F1xx)
this code works on a "BluePill" clone, with an STM32F103C8B
* clang-format changes on quantum/audio/* only
* audio_arm_dac: stopping the notes caused screeching when using the DAC audio paths
* audio_arm_pwm: use pushpull on the pin; so that a piezzo can be hooked up direclty without additional components (opendrain would require an external pullup)
* refactoring: remove unused file from/for atmel-avr chips
* refactoring: remove unused (avr) wavetable file
* audio_arm_dac: adapt dac_end callback to changed chibios DAC api
the previous chibios (17.6.0) passed along a pointer into the buffer plus a sample_count (which are/already where included in the DACDrivre object) - the current chibios (19.1.0) only passes the driver object.
this patch ports more or less exactly what the previous chibios ISR code did: either have the user-callback work the first or second half of the buffer (dacsample_t pointer, with half the DAC_BUFFER_SIZE samples) by adjusting the pointer and sample count
* audio-arm-dac: show a compile-warning on undefined audio-pins
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* audio_arm_dac: switch from exemplary wavetable generation to sine only
sine+triangle+squrare is exemplary, and not realy fit for "production" use
'stairs' are usefull for debugging (hardware, with an oscilloscope)
* audio_arm_dac: enable output buffers in the STM32
to drive external loads without any additional ciruitry - external opamps and such
* audio: prevent out-of-bounds array access
* audio_arm_dac: add output-frequency correcting factor
* audio_arm_pwm: get both the alternate-function and pm-callback variants back into working condition
and do some code-cleanup, refine documentation, ...
* audio_arm_pwm: increase pwm frequency for "higher fidelity"
on the previous .frequency=100000 higher frequency musical notes came out wrong
(frequency measured on a Tektronix TDS2014B)
note | freq | arm-pwm
C2 | 65.4 | 65.491
C5 | 523.25 | 523.93
C6 | 1046.5 | 1053.38
C7 | 2093 | 2129
C8 | 4186 | 4350.91
with .frequency = 500000
C8 | 4186 | 4204.6
* audio refactoring: remove unused variables
* audio_arm_dac: calibrate note tempo: with a tempo of 60beats-per-second a whole-note should last for exactly one second
* audio: allow feature selection in rules.mk
so the user can switch the audio driver between DAC and PWM on STM32 boards which support both (STM32F2 and up)
or select the "pin alternate" pwm mode, for example on STM32F103
* audio-refactoring: move codeblocks in audio.[ch] into more coherent groups
and add some inline documentation
* audio-refactoring: cleanup and streamline common code between audio_arm_[dac|pwm]
untangeling the relation between audio.c and the two drivers
and adding more documenting comments :-)
* audio_avr_pwm: getting it back into working condition, and cleanup+refactor
* audio-refactoring: documentation and typo fixes
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* audio-refactoring: cleanup defines, inludes and remove debug-prints
* audio_chibios_dac: define&use a minimal sampling rate, based on the available tone-range
to ease up on the cpu-load, while still rendering the higher notes/tones sufficiently
also reenable the lower tones, since with the new implementation there is no evidence of them still beeing 'bugged'
* audio-refactoring: one common AUDIO_MAX_VOICES define for all audio-drivers
* audio-chibios-pwm: pwm-pin-allternate: make the the timer, timer-channel and alternate function user-#definable
* audio_chibios_dac: math.h has fmod for this
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback
update Jack Humberts dac-example keymaps for the slight changes in the audio-dac interface
* audio-refactoring: use a common AUDIO_PIN configuration switch instead of defines
have the user select a pin by configuration in rules.mk instead of a define in config.h
has the advantage of beeing in a common form/pattern across all audio-driver implementations
* audio-refactoring: switch backlight_avr.c to the new AUDIO_PIN defines
* audio-common: have advance_note return a boolean if the note changed, to the next one in the melody beeing played
* audio-chibios-pwm: fix issue with ~130ms silence between note/frequency changes while playing a SONG
through trial,error and a scope/logic analyzer figured out Chibios-PWMDriver (at least in the current version) misbehaves if the initial period is set to zero (or one; two seems to work); when thats the case subsequent calls to 'pwmChhangePeriod' + pwmEnableChannel took ~135ms of silence, before the PWM continued with the new frequency...
* audio-refactoring: get 'play_note' working again
with a limited number of available voices (say AUDIO_VOICES_MAX=1) allow new frequencies to be played, by discarding the oldest one in the 'frequencies' queue
* audio: set the fallback driver to DAC for chibios and PWM for all others (==avr at the moment)
* audio-refactoring: moore documentation
and some cleanup
* audio-avr-pwm: no fallback on unset AUDIO_PIN
this seems to be the expected behaviour by some keyboards (looking at ckeys/handwire_101:default) which otherwise fail to build because the firmware-image ends up beeing too large for the atmega... so we fail silently instead to keep travis happy
* audio-refactoring: untangling terminology: voice->tone
the code actually was working on tones (combination of pitch/frequency, duration, timbre, intensity/volume) and not voices (characteristic sound of an instrument; think piano vs guitar, which can be played together, each having its own "track" = voice on a music sheet)
* audio-pwm: allow freq=0 aka a pause/rest in a SONG
continue processing, but do not enable pwm units, since freq=0 wouldn't produce any sound anyway (and lead to division by zero on that occasion)
* audio-refactoring: audio_advance_note -> audio_advance_state
since it does not only affect 'one note', but the internally kept state as a whole
* audio-refactoring: untangling terminology: polyphony
the feature om the "inherited" avr code has little to do with polyphony (see wikipedia), but is more a time-multiplexing feature, to work around hardware limitations - like only having one pwm channel, that could on its own only reproduce one voice/instrument at a time
* audio-chibios-dac: add zero-crossing feature
have tones only change/stop when the waveform approaches zero - to avoid audible clicks
note that this also requires the samples to start at zero, since the internally kept index into the samples is reset to zero too
* audio-refactoring: feature: time-multiplexing of tones on a single output channel
this feature was in the original avr-pwm implementation misnomed as "polyphony"
with polyphony_rate and so on; did the same thing though: time-multiplexing multiple active notes so that a single output channel could reproduce more than one note at a time (which is not the same as a polyphony - see wikipedia :-) )
* audio-avr-pwm: get music-mode working (again) on AVRs
with both pwm channels, or either one of the two :-)
play_notes worked already - but music_mode uses play_note
* audio-refactoring: split define MAX_SIMULTANEOUS_TONES -> TONE_STACKSIZE
since the two cases are independant from one another, the hardware might impose limitations on the number of simultaneously reproducable tones, but the audio state should be able to track an unrelated number of notes recently started by play_note
* audio-arm-dac: per define selectable sample-luts
plus generation script in ./util
* audio-refactoring: heh, avr has a MIN...
* audio-refactoring: add basic dac audio-driver based on the current/master implementation
whereas current=d96380e65496912e0f68e6531565f4b45efd1623
which is the state of things before this whole audio-refactoring branch
boiled down to interface with the refactored audio system = removing all
redundant state-managing and frequency calculation
* audio-refactoring: rename audio-drivers to driver_$PLATFORM_$DRIVER
* audio-arm-pwm: split the software/hardware implementations into separate files
which saves us partially from a 'define hell', with the tradeoff that now two somewhat similar chibios_pwm implementations have to be maintained
* audio-refactoring: update documentation
* audio-arm-dac: apply AUDIO_PIN defines to driver_chibios_dac_basic
* audio-arm-dac: dac_additive: stop the hardware when the last sample completed
the audio system calls for a driver_stop, which is delayed until the current sample conversion finishes
* audio-refactoring: make function-namespace consistent
- all (public) audio functions start with audio_
- also refactoring play*_notes/tones to play*_melody, to visually distance it a bit from play*_tone/_note
* audio-refactoring: consistent define namespace: DAC_ -> AUDIO_DAC_
* audio-arm-dac: update (inline) documentation regarding MAX for sample values
* audio-chibios-dac: remove zero-crossing feature
didn't quite work as intended anyway, and stopping the hardware on close-to-zero seems to be enought anyway
* audio-arm-dac: dac_basic: respect the configured sample-rate
* audio-arm-pwm: have 'note_timbre' influence the pwm-duty cycle
like it already does in the avr implementation
* audio-refactoring: get VIBRATO working (again)
with all drivers (verified with chibios_[dac|pwm])
* audio-arm-dac: zero-crossing feature (Mk II)
wait for the generated waveform to approach 'zero' before either turning off the output+timer or switching to the current set of active_tones
* audio-refactoring: re-add note-resting -> introduce short_rest inbetween
- introduce a short pause/rest between two notes of the same frequency, to separate them audibly
- also updating the refactoring comments
* audio-refactoring: cleanup refactoring remnants
remove the former avr-isr code block - since all its features are now refactored into the different parts of the current system
also updates the TODOS
* audio-refactoring: reserve negative numbers as unitialized frequencies
to allow the valid tone/frequency f=0Hz == rest/pause
* audio-refactoring: FIX: first note of melody was missing
the first note was missing because 'goto_next_note'=false overrode a state_change=true of the initial play_tone
and some code-indentations/cleanup of related parts
* audio-arm-dac: fix hardware init-click
due to wron .init= value
* audio-refactoring: new conveniance function: audio_play_click
which can be used to further refactor/remove fauxclicky (avr only) and/or the 'clicky' features
* audio-refactoring: clang-format on quantum/audio/*
* audio-avr-pwm: consecutive notes of the same frequency get a pause inserted inbetween by audio.c
* audio-refactoring: use milliseconds instead of seconds for 'click' parameters
clicks are supposed to be short, seconds make little sense
* audio-refactoring: use timer ticks instead of counters
local counters were used in the original (avr)ISR to advance an index into the lookup tables (for vibrato), and something similar was used for the tone-multiplexing feature
decoupling these from the (possibly irregular) calls to advance_state made sesne, since those counters/lookups need to be in relation to a wall-time anyway
* audio-refactoring: voices.c: drop 'envelope_index' counter in favour of timer ticks
* audio-refactoring: move vibrato and timbre related parts from audio.c to voices.c
also drops the now (globally) unused AUDIO_VIBRATO/AUDIO_ENABLE_VIBRATO defines
* audio.c: use system-ticks instead of counters the drivers have to take care of for the internal state posision
since there already is a system-tick with ms resolution, keeping count separatly with each driver implementation makes little sense; especially since they had to take special care to call audio_advance_state with the correct step/end parameters for the audio state to advance regularly and with the correct pace
* audio.c: stop notes after new ones have been started
avoids brief states of with no notes playing that would otherwise stop the hardware and might lead to clicks
* audio.c: bugfix: actually play a pause
instead of just idling/stopping which lead the pwm drivers to stop entirely...
* audio-arm-pwm: pwm-software: add inverted output
new define AUDIO_PIN_ALT_AS_NEGATIVE will generate an inverted signal on the alternate pin, which boosts the volume if a piezo is connected to both AUDIO_PIN and AUDIO_PIN_ALT
* audio-arm-dac: basic: handle piezo configured&wired to both audio pins
* audio-refactoring: docs: update for AUDIO_PIN_ALT_AS_NEGATIVE and piezo wiring
* audio.c: bugfix: use timer_elapsed32 instad of keeping timestamps
avoids running into issues when the uint32 of the timer overflows
* audio-refactoring: add 'pragma once' and remove deprecated NOTE_REST
* audio_arm_dac: basic: add missing bracket
* audio.c: fix delta calculation
was in the wrong place, needs to use the 'last_timestamp' before it was reset
* audio-refactoring: buildfix: wrong legacy macro for set_timbre
* audio.c: 16bit timerstamps suffice
* audio-refactoring: separate includes for AVR and chibios
* audio-refactoring: timbre: use uint8 instead of float
* audio-refactoring: duration: use uint16 for internal per-tone/note state
* audio-refactoring: tonemultiplexing: use uint16 instead of float
* audio-arm-dac: additive: set second pin output-low
used when a piezo is connected to AUDIO_PIN and AUDIO_PIN_ALT, with PIN_ALT_AS_NEGATIVE
* audio-refactoring: move AUDIO_PIN selection from rules.mk to config.h
to be consistent with how other features are handled in QMK
* audio-refactoring: buildfix: wrong legacy macro for set_tempo
* audio-arm-dac: additive: set second pin output-low -- FIXUP
* audio.c: do duration<>ms conversion in uint instead of float
on AVR, to save a couple of bytes in the firmware size
* audio-refactoring: cleanup eeprom defines/usage
for ARM, avr is handled automagically through the avr libc and common_features.mk
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* audio.h: throw an error if OFF is larger than MAX
* audio-arm-dac: basic: actually stop the dac-conversion on a audio_driver_stop
to put the output pin in a known state == AUDIO_DAC_OFF_VALUE, instead of just leaving them where the last conversion was... with AUDIO_PIN_ALT_AS_NEGATIVE this meant one output was left HIGH while the other was left LOW
one CAVEAT: due to this change the opposing squarewave when using both A4 and A5 with AUDIO_PIN_ALT_AS_NEGATIVE
show extra pulses at the beginning/end on one of the outputs, the two waveforms are in sync otherwise.
the extra pusles probably matter little, since this is no high-fidelity sound generation :P
* audio-arm-dac: additive: move zero-crossing code out of dac_value_generate
which is/should be user-overridable == simple, and doing one thing: providing sample values
state-transitions necessary for the zero crossing are better handled in the surrounding loop in the dac_end callback
* audio-arm-dac: dac-additive: zero-crossing: ramping up or down
after a start trigger ramp up: generate values until zero=OFF_VALUE is reached, then continue normally
same in reverse for strop trigger: output values until zero is reached/crossed, then keep OFF_VALUE on the output
* audio-arm-dac: dac-additive: BUGFIX: return OFF_VALUE when a pause is playing
fixes a bug during SONG playback, which suddenly stopped when it encoutnered a pause
* audio-arm-dac: set a sensible default for AUDIO_DAC_VALUE_OFF
1/2 MAX was probably exemplary, can't think of a setup where that would make sense :-P
* audio-arm-dac: update synth_sample/_wavetable for new pin-defines
* audio-arm-dac: default for AUDIO_DAC_VALUE_OFF
turned out that zero or max are bad default choices:
when multiple tones are played (>>5) and released at the same time (!), due to the complex waveform never reaching 'zero' the output can take quite a while to reach zero, and hence the zero-crossing code only "releases" the output waaay to late
* audio-arm-dac: additive: use DAC for negative pin
instead of PAL, which only allows the pin to be configured as output; LOW or HIGH
* audio-arm-dac: more compile-time configuration checks
* audio-refactoring: typo fixed
* audio-refactoring: clang-format on quantum/audio/*
* audio-avr-pwm: add defines for B-pin as primary/only speaker
also updates documentation.
* audio-refactoring: update documentation with proton-c config.h example
* audio-refactoring: move glissando (TODO) to voices.c
refactored/saved from the original glissando implementation in then upstream-master:audio_avr.c
still needs some work though, as it is now the calculation *should* work, but the start-frequency needs to be tracked somewhere/somehow; not only during a SONG playback but also with user input?
* audio-refactoring: cleanup: one round of aspell -c
* audio-avr-pwm: back to AUDIO_PIN
since config_common.h expands them to plain integers, the AUDIO_PIN define can directly be compared to e.g. B5
so there is no need to deal with separate defines like AUDIO_PIN_B5
* audio-refactoring: add technical documentation audio_driver.md
which moves some in-code documentation there
* audio-arm-dac: move AUDIO_PIN checks into c-code
instead of doing everything with the preprocessor, since A4/A5 do not expand to simple integers, preprocessor int-comparison is not possible. but necessary to get a consistent configuration scheme going throughout the audio-code... solution: let c-code handle the different AUDIO_PIN configurations instead (and leave code/size optimizations to the compiler)
* audio-arm-dac: compile-fix: set AUDIO_PIN if unset
workaround to get the build going again, and be backwarts compatible to arm-keyboards which not yet set the AUDIO_PIN define. until the define is enforced through an '#error"
* audio-refactoring: document tone-multiplexing feature
* audio-refactoring: Apply suggestions from documentation review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* audio-refactoring: Update docs/audio_driver.md
* audio-refactoring: docs: fix markdown newlines
Terminating a line in Markdown with <space>-<space>-<linebreak> creates an HTML single-line break (<br>).
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* audio-arm-dac: additive: fix AUDIO_PIN_ALT handling
* audio-arm-pwm: align define naming with other drivers
Co-authored-by: Joel Challis <git@zvecr.com>
* audio-refactoring: set detault tempo to 120
and add documentation for the override
* audio-refactoring: update backlight define checks to new AUDIO_PIN names
* audio-refactoring: reworking PWM related defines
to be more consistent with other QMK code
Co-authored-by: Joel Challis <git@zvecr.com>
* audio-arm: have the state-update-timer user configurable
defaulting to GPTD6 or GPTD8 for stm32f2+ (=proton-c)
stm32f1 might need to set this to GPTD4, since 6 and 8 are not available
* audio-refactoring: PLAY_NOTE_ARRAY was already removed in master
* Add prototype for startup
* Update chibiOS dac basic to disable pins on stop
* Add defaults for Proton C
* avoid hanging audio if note is completely missed
* Don't redefine pins if they're already defined
* Define A4 and A5 for CTPC support
* Add license headers to keymap files
* Remove figlet? comments
* Add DAC config to audio driver docs
* Apply suggestions from code review
Co-authored-by: Jack Humbert <jack.humb@gmail.com>
* Add license header to py files
* correct license header
* Add JohSchneider's name to modified files
AKA credit where credit's due
* Set executable permission and change interpeter
* Add 'wave' to pip requirements
* Improve documentation
* Add some settings I missed
* Strip AUDIO_DRIVER to parse the name correctly
* fix depreciated
* Update util/audio_generate_dac_lut.py
Co-authored-by: Jack Humbert <jack.humb@gmail.com>
* Fix type in clueboard config
* Apply suggestions from tzarc
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Johannes <you@example.com>
Co-authored-by: JohSchneider <JohSchneider@googlemail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joshua Diamond <josh@windowoffire.com>
Co-authored-by: Jack Humbert <jack.humb@gmail.com>
* Fixed some comments in the defines file.
* Replaced the Git command layer with a Windows Terminal shortcut layer.
* Added numbered tab switching to the Windows Terminal layer.
* Added 'new tab' and 'command pane' commands to the Windows Terminal layer.
* Shortened the USB polling interval for the Iris to 1 millisecond.
* Disabled old style macros and functions for the Iris.
* add feature_unicode.md translation
* consolidate sentence end
* update based on comment
* update based on comment
* update based on comment
* update based on comment
* [Keyboard] YMDK YMD40 v2
* fork default keymap into default and factory
- factory keymap is as assigned by the extracted JSON provided by the vendor
- default keymap is based on the Planck
* add AUDIO_SUPPORTED rule per drashna
* modify factory keymap's readme
Recommend users copy the default keymap instead.
* Remove GCC check from debug
* Remove platform logic from common.mk
* Refactor platform logic within print.h
* restore debug.c format
* headers
* Rename function pointer type
* review comments
* Update tmk_core/common/printf.c
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Format
Co-authored-by: Nick Brassel <nick@tzarc.org>
* LED Matrix: add led_matrix_types.h and implement g_led_config
* Set correct flags for non-"modifier" LEDs
* Clean up docs a little
* Add license headers for [led,rgb]_matrix_types.h
* Add default ISO Windows layout for Durgod/K320
* Duplicate default_iso to default_iso_mac
Swap the L{GUI,ALT} keys to match the mac layout, and remove the
windows key lock functionality.
* Remove windows-key lock in default_iso
* Fixup wonky macro layout inherited from ansi keymap
* Add Z70Ultra which is a Hotsawp RGB 65% keyboard
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
* Update info.json
update the name of layout to consistent the keyboard.
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra
* Support Z70Ultra
[Modified] info.json to support two different layouts
[Add] rules.mk to support default folder
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* remove excessive arguments from LAYOUT_split_space
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Use macro replace with the literal for CS & SW
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add GPL for files
* Update keymaps/default/keymap.c
* Update keymaps/via/keymap.c
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] Update MOJO75 to support multi version and Update the LED's
ID of RGB Matrix
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* added default as a starting point
* added readme per guidelines
* made necessary changed to keymap to follow guidelines
* changed debounce mode for more smooth usage at the cost of mem
* increased polling interval
* Revert "made necessary changed to keymap to follow guidelines"
yikes! I modified the WRONG directory. reverted.
This reverts commit 8ba3d97af5.
* reverted commit that modified file in incorrect directory. modified intended file.
* added license tp config.h
* enable LTO for smaller firmware size
* delete since this was added to userspace rules.mk
* readme updates and new images
* Add -j to compile and flash commands in userpsace
* Enable NKRO
* Enable NKRO, VIA, LTO by default
* Stanrc85-ansi readme update
* Stanrc85-alice readme
* quick RGB layer indicator fix in keymap
* Simplify encoder code and clean up keymaps.
-Removed overly complex VIA encoder code. It wasn't adding any value and was confusing users who were trying to customize encoder functionality on VIA keymaps.
-Replaced KC_TILDE with KC_HOME in all keymaps, as KC_TILDE sends a left shift, which was confusing some folks as they tested their build.
-Move layer names to enum
* Change encoder_update_kb to encoder_update_user per PR feedback
* ws2812: Fix number of nops for AVR at 8 MHz
When trying to calculate the number of nops for AVR running at 8 MHz,
the value of `w3` is expected to be negative; however, because `F_CPU`
is defined in tmk_core/avr.mk with the `UL` suffix, the preprocessor
performs its calculations using `unsigned long`, getting a very large
positive number instead of the expected negative number; this then
results in generating code with a huge number of nops. Fix the broken
calculations by performing a comparison before subtraction, so that the
unsigned number wraparound does not occur.
The keyboard which triggers the problem is `handwired/promethium`; the
buggy code silently compiles, but the resulting timings would be
completely wrong.
* ws2812: Clean up the code after the 8 MHz fix
Remove old code which was unsuccessfully trying to clamp negative w1, w2
and w3 values to 0, and set w1_nops, w2_nops and w3_nops directly.
* Don't block keys during startup animation
* More refinements related to startup and debug state
* restore key logging
* some cleanup on scan rate reporting
* trim some fat
* better lighting to indicate jumped to bootloader
* use eeprom for state restoration
* a little reorganization
* report version immediately when turn on debug
* hold-to-adjust for hue, sat, val
* cformat
* reorg rules.mk settings, fix compile with CONSOLE_ENABLE=no
* simplify spidey3 userspace
* NULL in layer list caused buggy behavior
* more bugfix
* update numpad layout to match matt30 MT3 /dev/tty keycaps
* swap emdash and endash
* map shift+backspace to delete
* removing NO_ACTION_ONSHOT makes the firmware SMALLER ?!
* cformat
* improve spi_glow
* disable shift-backspace = delete by default
* update lck75 json
* Create info.json
* wrong json file extension
* updated layout height and width in json
* Update info.json
* reverted changes from last update to json
an error was made
* Update info.json
found an extra key in the kle raw data
* Changed product ID
* Update keyboards/lck75/info.json
understood
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Add Z70Ultra which is a Hotsawp RGB 65% keyboard
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
* Update info.json
update the name of layout to consistent the keyboard.
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra
* Support Z70Ultra
[Modified] info.json to support two different layouts
[Add] rules.mk to support default folder
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* remove excessive arguments from LAYOUT_split_space
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Use macro replace with the literal for CS & SW
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add GPL for files
* Update keymaps/default/keymap.c
* Update keymaps/via/keymap.c
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Fix the LED's ID of ISSI for MJ64 REV2
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add support VIA support to v60 Type R
* Update keyboards/v60_type_r/config.h
Revert combining product and manufacturer
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/v60_type_r/keymaps/via/keymap.c
Remove empty `led_set_user` function
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/v60_type_r/rules.mk
Don't enable bootmagic lite
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add missing empty layers for VIA
* Update keyboards/v60_type_r/rules.mk
Fix comment formatting
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update the VENDOR_ID
Co-authored-by: Ryan <fauxpark@gmail.com>
* added Pursuit40 PCB for Panc40
Pursuit40 is another PCB option for the Panc40 that was sold on Panc.co/store
* added via support
* Apply suggestions from code review
* Apply suggestions from code review
* deleted extra row in VIA keymap
sorry about that - extra row was a holdover from a copy-paste
* deleted commented extra row
extra row was a holdover from a copy-paste
* updated VIA keymap
empty layer added
* fixed bug
* Apply suggestions from code review
committed
* Improve Pointing Device report sending
* Hide old report behind preprocessors too
* put host_mouse_send() in curly brackets
* Remove POINTING_DEVICE_ALWAYS_SEND_REPORT functionality
* Fix typo
* fix function ref in docs
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add lck75 keyboard
A 75% THT keyboard with an OLED and rotary encoder
* added info.json
* fixed rules.mk
* changed vendor id
* Update keyboards/lck75/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/lck75/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/lck75/keymaps/default/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/lck75/keymaps/default/keymap.c
moved code to the rules.mk folder
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update rules.mk
moved oled driver enable to rules.mk code
* Update keyboards/lck75/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update oled.c
id like to keep the copyright there as it's my friend that helped me with the OLED specifically. also updated the old_task_user
* Update keyboards/lck75/oled.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/lck75/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/lck75/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/lck75/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update rules.mk
* merged oled.c code into keymap.c file
tested and works correctly on my board
* merged code from this file into the keymap.c file
this file is no longer needed
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Fix DEBUG_MATRIX_SCAN_RATE on chibiOS when console is enabled
* update type in dprintf
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* resolve race condition between suspend and wake in LUFA
* avoid multiple calls to suspend_power_down() / suspend_wakeup_init()
* Remove duplicate suspend_power_down_kb() call
* pause on wakeup to wait for USB state to settle
* need the repeated suspend_power_down() (that's where the sleep is)
* more efficient implementation
* fine tune the pause after sending wakeup
* speculative chibios version of pause-after-wake
* make wakeup delay configurable, and adjust value
* better location for wakeup delay
* Add SCRAMBLE
* Make requested changes to PR
* Add all layers to VIA keymap
Implement drashna's PR feedback in order to avoid random data within the layers in VIA.
* Make requested changes to PR
Implement fauxpark's PR feedback to clean up readme.md and rules.mk.
* Make changes based on PR feedback
-Changed VIA layers to enum
-Added info on how to enter the bootloader to readme
* generate rules.mk from a json mapping
* generate rules.mk from a json mapping
* support for config.h from json maps
* improve the mapping system
* document the mapping system
* move data/maps to data/mappings
* fix flake8 errors
* fixup LED_MATRIX_DRIVER
* remove product and description from the vision_division keymap level
* reduce the complexity of generate-rules-mk
* add tests for the generate commands
* fix qmk doctor when submodules are not clean
* Initial attempt at allowing keyboards to indicate what features they do not support
* try to use a for loop instead
* Update disable_features.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add a few more features
* remove my test fixture
* disable things that make all:all suggested"
Co-authored-by: Zach White <skullydazed@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* at90usb162 support
* fix missing bracket
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add support for 8 buttons to mouse report
This includes support for 8 buttons in mousekeys. However, this does move the keys around due to the fact that the last mousekey keycode is already 0xFF, so any past that would not work with register_code and the like, breaking them for tap hold keys, encoders, and other features.
* Update mouse key docs
* Add changes based on feedback
* Fix VUSB report size comment
Because drashna red gud
* Fix typo in action.c
* Fix IS_MOUSE_BUTTON check
* Change start range for mousekeys so that the end is 0xFF properly
* condense mousekeys check
* First version of keymap
* cleaned up code, made some tweaks, added readme
* extended oled timeout
* resolved final issues, all features functional
* added some leader-key combos
* added missing RGB keys to layout diagram
* removed lines for older elite-c v3
* make filename lowercase
* add old update interval
* fix spacing
* Initial support for Durgod K320 with BootMagic Lite
- Adding missing files
- Add Unicode Map Support & new user keymap
- Remove personalized features from Default keymap
- Added Unicode Map to both Default and kuenhlee keymap.c
- Updated readme.md
- Added additional Fn Shortcut keys
* Additional support for Durgod K320
- Simplifying default keymap
- Renaming durgod_k320 => durgod/k320
- Removing copy of ST_NUCLEO64_F070RB from K320. Replacing with local board.h
- Adding Mac keyboard layout for K320 as alternative via Fn+F12
- Implementing Windows Key lock on K320
- Cleaning up duplicated core functionality
- Adding default_toggle_mac_windows keymap with:
- Ability to toggle between Windows and MacOS layout
- Mac Media Lock functionality.
* Updating K320 keymap readme
Co-authored-by: kuenhlee <eos.camera.lee@gmail.com>
* Knobgoblin keyboard initial commit
New macropad initial commit. Keyboard and keymap
* corrected bracket and layout name
* attempting info file fix again
* info file line 33 hanging comma fix
* Update keyboards/knobgoblin/config.h
per fauxpark review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/knobgoblin/readme.md
per fauxpark review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/knobgoblin/readme.md
per fauxpark review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
The LED anodes of the pockettype are connected to the bus voltage when a
pro micro is used, but other controllers like the Elite-C (v4) connect this
pin to GPIO B0. This means that LEDs do not work by default for those
controllers.
This commit implements a fix for that by setting the B0 pin high.
* Add RGB Matrix support for Mark 65 keyboard
* Update drive LED count
* Removed unnecessary define line
* Corrected typo
Co-authored-by: filterpaper <filterpaper@localhost>
* initial commit Dawn keyboard
* fixing some matrix
* final tweaks to keymaps and info.json layout
* fix info.json missing delimiter
* missing elements in info.json layout, resolved through lint
* fixed missing link image in readme
* Update keyboards/mechstudio/dawn/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: David <david@tarpit.be>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Fix minor typo in "General FAQ"
"want to do brand it with QMK" -> "want to brand it with QMK"
* Reword some of "Debugging FAQ" & "Miscellaneous FAQ".
Mostly grammatical wording of some parts and missing capitalization
* Initial commit on new clean branch. Testing out functionality of oled and encoder for default features.
* Cleaned up the initial push and removed the fancy keymap until the extra features and functionality can be tested and made more user friendly.
* Cleaned up the readme some more, compiled and tested both default and via keymaps, and did another round of checks to prepare for starting the PR.
* Cleaning up the keymap to meet expected formatting in a couple places and also adding in the TAP_CODE_DELAY after newly encoutnered encoder issues and inconsistencies.
* Initial commit of branch specifically for implementing the more complicated fancy keymap as I expect the main PR to be approved first.
* testing bongo cat out
* Progress with intended OLED behavior. Needs to be cleaned up still.
* Cleaned up bongocat and added WPM display on it.
* Almost there. Need to rethink the layer checking in encoder.
* Fixing all the merge issues I didn't check before doing the last commit. Learn from my mistakes, check your commits.
* Fixed and updated fancy firmware and bongocat firmware.
* Updating license year since I will be doing a PR anyway.
* Update keyboards/mechwild/mercutio/keymaps/fancy/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* split config.h for each variant
* split rules.mk for each variant
* split source and header files for each variant
* move keymaps to the appropriate variant
* update keyboard readme
* update keymap readmes
* differentiate Staggered and Ortho USB Device Strings
* clean up formatting in info.json
* split info.json files for each variant
* break up the info.json for readability
* correct key positioning and board dimensions
* correct key object sequences
* add weak encoder function to keyboard level
Allows Configurator-compiled firmware to have encoder functionality.
* add variant-specific readme files and bootloader instructions
* QMK Configurator layout support for Pinky
3-row and 4-row versions
* refactor default keymaps
- use an enum for layer names
- remove redundant definitions
- qmk cformat pass
- modify pinky/4 via keymap to mirror pinky/4 default functionality
* remove LAYOUT_kc macros
This usage is not endorsed by QMK as it has been found to be confusing to novice users.
* add VIA support to pinky/3
* update config.h files
Removes unnecessary definitions for Backlight, RGB Underglow, Magic config and MIDI.
* update main rules.mk file
Updates the rules.mk file to match the formatting of the current QMK-provided template. Removes sample bootloader comments, feature rules that are no longer included in the template, and updates the in-line comments.
* update and split keyboard readme
Updates the main readme file's formatting, adds instructions to access bootloader mode, and adds more specific readmes for each version.
* add line breaks between rows in the info.json files
* rename layout macros for Community Layout forward compatibility
The layouts of the Pinky3 and Pinky4 aren't currently Community Layouts, but support for them could be added with a rules.mk edit should the layouts be added to QMK.
* Update other keyboards for rgb matrix changes
* Remove customized bootmagic code
* Fix corne layout compilation error
* Fix compiler errors with all keymaps
* Add Simple Visualizer for ergodox infinity
* Fix compile issue with Corne
* Fix keymap stuff
* Add alias for mouse layer
* Add Halmak Keyboard layout
* Updates for Kyria
* Add support for oled interval
* Change RGB stuff
[CHANGE] Fix coexistence issues
* Fix rgb_stuff
* Add custom ploopyco mouse keymap
* Decrease default dwell time
* Updates based on last breaking changes update
* Disable command on dactyl
* Update ergodox to use proper commands for rgb matrix indicators
* Update all rgb matrix indicator functions
* Update rules for dactyl-manuform
* Reduce wait time for mouse layer off event
* Add more info to logger
* Add wrappers for get_tapping term
* Move version.h include into only file that actually needs it
* Update rgb sleep stuff
* Update key print function
* Change DM keymap settings
* Change pin for DM Manuform
* Add Proton C stuff for Corne keymap
* more arm corne tinkering
* Even more arm stuff for corne
* Cleanup corne stuff
* redirect default keymap to drashna
because I am a very bad man
* change corne rgb priority
* Update tractyl manuform to not conflict
* Add more secret stuff
* more dactyl tweaks
* Add more options to split transport
* Changes of oled support
* Change split settings
* Improve keylogger formatting more
* tweak oled stuff
* Oled and such tweaks
* Reduce brightness due to leds
* Decrease brightness more
* Only run layer code if master
* info.json: human-friendly formatting
* info.json: update key object labels
Some of the characters in the original file don't play nicely with `qmk info -l` on Windows.
* info.json: correct key object order
* exclude 'helix/rev3_4rows' from CI
Since helix/rev3_4rows is almost the same as helix/rev3_5rows, there is no point in checking with travis-ci.
* include 'helix/pico/back' to CI
helix pico and helix rev2 are still available. I would like to check both by travis-ci, but here I will add a check only for helix pico.
* first pass
* firmware firmware?
* Split out debug + testing docs
* tidy up duplicate css
* Add extra info to debug example
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add support for bigknob
Add support for bigknob macropad
* corrected files
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* corrected tap dance
* Update config.h
* correct image link
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* added GPL headers
* Update readme.md
* update rules to disable tap dance
* remove tap dance
* Update rules.mk
trying to get to pass travis test
* Update rules.mk
remove tap dance
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
With MAJOR_MODE (= major scale), keys in one octave is not 12 but 7.
To solve this problem, change divisor number from 12 to 7 at %(Modulo) and /(Division).
NOTE:
The last 12 represents half step keys in one octave for pitch calculation.
* Add keyboard: Mesa TKL
* Fix image link in readme
* Update keyboards/mesa/mesa_tkl/mesa_tkl.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/mesa/mesa_tkl/rules.mk
White space changes
Co-authored-by: Ryan <fauxpark@gmail.com>
* Replace tabs with spaces per C coding conventions.
* Update keyboards/mesa/mesa_tkl/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* new repo: create cmm.studio folder, add saka qmk firmware
new folder for cmm.studio line up keyboard
added saka68 keyboard qmk and via firmware support
* Update keyboards/cmm.studio/saka68/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/cmm.studio/saka68/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/cmm.studio/saka68/keymaps/via/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/cmm.studio/saka68/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* fix on keymap, readme
fix on keymap, readme
* Update keyboards/cmm.studio/saka68/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/cmm.studio/saka68/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* update vendor name with _ instead of .
update vendor name with _ instead of .
* Update readme.md
change the make format
* Update keyboards/cmm_studio/saka68/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* deleted some files from cmm.studio, changes to cmm_studio
deleted some files from cmm.studio, changes to cmm_studio
* Update readme.md
make command changed
* Update keyboards/cmm_studio/saka68/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
added pic for pcb
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update keyboards/cmm_studio/saka68/config.h
tested and does work now. deleting these lines
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update keyboards/cmm_studio/saka68/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
added use physical reset button instruction
* change to the cmm saka folder
making the changes to cmm saka firmware
seperated solder version firmware and hotswap version firmware
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* change to the cmm saka hotswap folder
Co-authored-by: Ryan <fauxpark@gmail.com>
* feat(kyria): new keymaps with KC_LGUI on another key
add also possibility to scroll with encoder and finally play with olded
screen to replace default kyria logo by Magic the Gathering mana color
icon.
* Update keyboards/kyria/keymaps/benji/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add magic logo
* add mouse button
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add support for --clean to compile and flash
* compile standalone JSON keymaps without polluting the tree
* Add support for passing environment vars to make
* make flake8 happy
* document changes to qmk compile and flash
* add -e support to json export compiling
* Fix python 3.6
* honor $MAKE
* add support for parallel builds
* add byte order bgr for ws2812
* update docs for driver change
* Update ws2812_driver.md
* Update docs/ws2812_driver.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* WIP working on new keymap
* tweaking keymap
* updated keymap
* cleaned up a little bit
* New preonic keymap
* my preonic keymap
* added mac layout
* preonic map update
* cleaning up old repo
* cleaning up to match upstream
* more cleanup
* removing old keymaps
* cleaned up commit history for bm60poker via support
* cleaned up via keymap
* fixed copywrite
Co-authored-by: Peter Peterson <ppeterson@noao.edu>
* 1st trial on 1_2
* remove keymaps/default/km_default.c
* fix cool836A.h
* fix keymap.c into 3x12
* rename to cool836a (not 'A')
* remove cool836A (not a)
* remove backslashes at keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* update keymap.c (add licence)
* Update keyboards/cool836a/keymaps/default/readme.md
removed "<br>" in line 2
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/cool836a/keymaps/default/readme.md
remove "<br>" in line 4
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/cool836a/keymaps/default/readme.md
remove "<br>" in line 8
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/cool836a/cool836a.h
remove cool836a.h line 30:36
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initialize domnantas layout
* Update oled status display
* Layout and oled changes
* Updates to keymap
* Add F keys and page moves
* Add media keys, rearrange home and end
* Add instructions
* Swap backspace and enter
* Remove unnecesary Enter keymap
* - Change display timeout
- Update minus sign to work on both English and Lithuanian layouts
* Add copyright header
* Replace static strings with PSTR
* Update keyboards/lily58/keymaps/domnantas/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/lily58/keymaps/domnantas/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/lily58/keymaps/domnantas/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/lily58/keymaps/domnantas/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/lily58/keymaps/domnantas/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add VIA support
made changes to add VIA support for the CA66
- added VIA keymap.c, readme.md, rules.mk
- changes made to main rules.mk to keep firmware size down (mousekey_enable = no; backlight_enable = no)
- changed VENDOR_ID in config.h from 0xFEED to 0x504B (PK)
* Minor changes to CA66 for VIA support
edited keymap info
enabled backlight
* Update vendorID
Change to vendorID to remove conflict with previously chosen vendorID already in use
* Update keyboards/playkbtw/ca66/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/playkbtw/ca66/keymaps/via/readme.md
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/playkbtw/ca66/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* add Hub20 support
* Keymap formatting cleanup
Co-authored-by: Ryan <fauxpark@gmail.com>
* Delete bootloader_defs.h as no longer required
* Correct make / flashing example
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* new keymap
* Update keyboards/primekb/prime_e/keymaps/gwillad/keymap.c
use a more concise pin setting method
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Adam Gwilliam <agwilliam@yaharasoftware.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keymap] own Lily58 keymap
Signed-off-by: Christian Eiden <christian@eiden.ch>
* adjustments of personal keymap
Signed-off-by: Christian Eiden <christian@eiden.ch>
* added urbanvanilla keymap
Urbanvanilla's keymap for massdrop/alt keyboard
adds in an idle timer to turn off RGB after set amount of time.
poor unsuccessful attempt at replicating a velocikey like functionality.
Grave escape is enabled on ESC.
* Update readme.md
* updating documentation
* Create readme.md
* restoring default documentation
* update with review changes implemented
removed unnecessary lines and files.
increased wait_us() parameter to 40 as was still getting chatter at 20.
removed some code for the terrible rudimentary attempt at velocikey for rgb matrix
* Update matrix.c
* Revert "Merge pull request #3 from urbanvanilla/dev_branch"
This reverts commit deb55d797a4629965c990ab507251489c578573d, reversing
changes made to ba8817356f6c0881cf7f3214f7f1ebd31febceb5.
* Update keymap.c
* added urbanvanilla keymap
Urbanvanilla's keymap for massdrop/alt keyboard
adds in an idle timer to turn off RGB after set amount of time.
poor unsuccessful attempt at replicating a velocikey like functionality.
Grave escape is enabled on ESC.
* Update readme.md
* updating documentation
* Create readme.md
* restoring default documentation
* update with review changes implemented
removed unnecessary lines and files.
increased wait_us() parameter to 40 as was still getting chatter at 20.
removed some code for the terrible rudimentary attempt at velocikey for rgb matrix
* Update matrix.c
* Revert "Merge pull request #3 from urbanvanilla/dev_branch"
This reverts commit deb55d797a4629965c990ab507251489c578573d, reversing
changes made to ba8817356f6c0881cf7f3214f7f1ebd31febceb5.
* Delete matrix.c
* Update keyboards/massdrop/alt/keymaps/urbanvanilla/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keymap.c
* Update keymap.c
* Update keyboards/massdrop/alt/keymaps/urbanvanilla/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add bongo cat animation
* Map all keys on base layer
... to make it easier to test newly built keyboards. The encoders
are optional and can be placed in different locations.
* Fix Torn in QMK configurator
This removes additional variables defined in the keymap.c file, so
that the default firmware can be compiled by the configurator.
Co-authored-by: Richard Titmuss <richardt@spotify.com>
* init
init
* Update keyboards/hp69/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/hp69/keymaps/via/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/hp69/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* re-added audio support
re-added audio support
* Update keyboards/hp69/readme.md
reduced the size of the default image
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/hp69/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/hp69/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* initial commit- copy of default
* beginnings of ergodox layout conversion
* from scratch 2020 RJH ergodox layout!
* remove extra line in keymap
* only shift to layers, led work
* Fleshed out readme
* tweak alt placement
* updated readme
* PR feedback, updated default layer
* Update keyboards/ergodox_infinity/keymaps/rjhilgefort/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* fix matrix_io_delay() timing in quantum/matrix.c
* Updated comments explaining the need for matrix_io_delay() in quantum/matrix.c
* fix matrix_io_delay() timing in quantum/split_common/matrix.c
* Update quantum/matrix.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update quantum/split_common/matrix.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update quantum/matrix.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update quantum/split_common/matrix.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* add waitOutputPinValid() and wait_cpuclock() into quantum/quantum.h and tmk_core/common/wait.h
* add matrix_output_select_delay() and matrix_output_unselect_delay()
* fix quantum/matrix_common.c, tmk_core/common/matrix.h
* fix tmk_core/common/wait.h
* fix quantum/quantum.h, tmk_core/common/wait.h
* waitOutputPinValid() rename to waitInputPinDelay() in quantum/quantum.h.
* waitOutputPinValid() rename to waitInputPinDelay() in quantum/matrix_common.c
* update tmk_core/common/wait.h
* update comment in quantum/matrix.c, quantum/split_common/matrix.c
* update quantum/quantum.h: Make more margin in the GPIO_INPUT_PIN_DELAY default value.
Co-authored-by: Ryan <fauxpark@gmail.com>
* Acheron Lasgewloth: layout macro rework
Arrange the layout macro to match the assembled board.
* rename layout macro
The layout supported is equivalent to 60% ANSI with split Backspace and split Right Shift, and supports every extant switch position.
Adds community layout support.
* add LAYOUT_60_ansi support
* add Configurator data
* convert tabs to spaces in lasgweloth.h
* Allow recording of the last matrix activity time, to simplify implementation of display timeouts and the like.
* Add requested changes from code review.
* Simplify split matrix last changed.
The previous implementation generated accents in NFKD -- e.g., i
followed by fn+e would generate í, which is actually an ordinary i
followed by U+0301 COMBINING ACUTE ACCENT. Unfortunately, it turns
out that a bunch of websites and apps (especially European ones
written in languages that use these a lot) were very poorly written,
and will misparse and/or crash if presented with Unicode NFKD. They
require and expect NFKC, with characters like í (U+00ED LATIN SMALL
I WITH ACUTE) that look visually identical -- and are in fact
normalization-equivalent -- but have to be encoded differently.
The new accent implementation handles this in a very flexible way.
Many new comments added as well, as it's also clear that this is going
to need a bit more expansion before it becomes a true polyglot keymap.
Co-authored-by: Yonatan Zunger <zunger@desiderata.lan>
* rework layout macro
Rework the layout macro so it's arranged the way the hardware is.
* info.json: use debug linting
* info.json: rebuild to correct key sequence
* white-space formatting
Makes the keymap and layout macro a bit more representative of where everything is.
* Add Borsdorf
* Delete config.h
* Add basic VIA keymap
* Update default keymap
* Default now uses layout_all
* Default now has layer with reset key
* Fix missing comma in borsdorf keymap
* Update rules.mk to be less specific
* Update chibiOS files
* Update keymaps to swap GUI and Alt keys
* Delete unnecessary readme
* Update VIA keymap to match default
* Remove boilerplate from readme
* Udate Copyright message
* Remove unused key from LAYOUT_rshift
* Update borsdorf.c
Remove unnecessary boiler plate
Co-authored-by: Joel Challis <git@zvecr.com>
* Add copyright message to VIA keymap
Co-authored-by: Joel Challis <git@zvecr.com>
* Fix missing directory in readme
Co-authored-by: Joel Challis <git@zvecr.com>
* Fix incorrect rules.mk
* Update BOOTMAGIC_ENABLE to the preferred lite
Co-authored-by: Joel Challis <git@zvecr.com>
* Remove redundant description from config
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/cutie_club/borsdorf/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/cutie_club/borsdorf/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initial CK60i support
* Update README, add HAL_PWM and remove AUDIO and BLUETOOTH from rules.mk
* VIA support
* Fix VIA_ENABLE to 'yes'
* Remove CONSOLE_ENABLE from rules.mk
* attribute weak for encoder callback
* Remove KC_NO definition from default keymap
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
* Update feature_rgblight.md
The note is meant to let people know that this is specific to RGB Backlight and does not work with RGB Matrix based implementations.
* Update docs/feature_rgblight.md
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* chore: pulled the latest from master
Bring my redox layout from my latest redox branch
Bring my latest user stuff from my redox branch
* Update users/danielo515/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* chore: some more layouts
* feat: add gaming layer (has a bug)
* chore: more gaming layout
* chore: deactivate gaming layer when switching
* chore: simplify gaming toggle
* Update .vscode/settings.json
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add support for idobao id80 iso layout
* This change is required as there is a logic bug on the board that C7
(capslock) is inverted thus lowercase is with light on. Mind the ! in
the write to the pin.
* Apply suggestions from code review
All fine for me, thanks for the additional information!
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* move device information to separate config.h for id80 iso and ansi
* commit via keymap similar to default. There is a problem with mapping compiling vor via, resulting in KC_ENT residing on KC_PGDN. Switching off via support in rules.mk makes the keyboard behave fine
* change KC_BSLS to KC_NUHS as this is an iso board
Co-authored-by: Carsten <modebm@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
The pcb used for wheatfield/split75 supports ANSI and ISO layout. This
commit adds the ISO variant.
With suggestions from code review:
Co-authored-by: Drashna Jael're <drashna@live.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Create Alter folder
* Revert "Create Alter folder"
This reverts commit 361103b821.
* Added the n40_o folder
* Edited info.json, n40_o.h and rules.mk
* Edited readme as per comment
* Add Herringbone Pro, reorganize herringbone folder
* Finish encoder functionality
* Change image in readme
* Fix info.json
* Flip encoder direction
* Update keyboards/ramonimbao/herringbone/pro/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ramonimbao/herringbone/pro/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ramonimbao/herringbone/pro/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ramonimbao/herringbone/pro/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add OLED support, split space, default folder
* Fix LAYOUT_all in info.json
* Remove WPM feature
* Add readme to top level herringbone folder
* Re-add WPM because now the OLED won't turn back on lol
* Add missing timer_read32
* Add OLED wakeup on knob use
* Update keyboards/ramonimbao/herringbone/v1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ramonimbao/herringbone/v1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ramonimbao/herringbone/pro/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ramonimbao/herringbone/pro/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add small QoL improvments for tapping
* Update keyboards/ramonimbao/herringbone/readme.md
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* Add bootloader instructions and improve LAYOUT_all a bit
* Update keyboards/ramonimbao/herringbone/pro/pro.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/ramonimbao/herringbone/pro/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/ramonimbao/herringbone/pro/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/ramonimbao/herringbone/pro/keymaps/iso/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/ramonimbao/herringbone/v1/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* noop; indent and comment cleanup
* config for rogthefrog layout
* removed encoder function as there is no encoder on this pcb
* removed unnecessary declaration
* replaced individual constants with an enum for extensibility
* removed unused enum
* Added GPL license language
* added copyright for my changes, per GPL
* noop; removed unneeded line continuations; fixed indentation
* Add oddballl v2
- add CPI options
- add scroll support
- add click-and-drag support
- PMW3360 implementation
- ADNS9800 improvements
* Set default make directory
* Update readme with PMW config
* Change bootloader
* Update unused pins on v2
* Remove diode switch
* Move bootloader selection to keyboard version level
* Change default keyboard folder to v1
* Move sensor selection to keymap
* Remove PK debounce
* Change to only send mouse report on change
* Change CPI function cpi type
* Remove EEPROM state check
* Update CPI to only change on key down
* Fix incorrect F8 in keymap
* Add v2.1 with more convenient controller pinout
* Add keyboard readmes
* Update keyboards/oddball/pmw/pmw3360_srom_0x04.h
Remove direct AVR reference
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove direct AVR reference
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Alexander Tulloh <alex@riberry.io>
Co-authored-by: Ryan <fauxpark@gmail.com>
* add support for specifying BOARD in info.json
* move BOARD from rules.mk to info.json for clueboard
* fix keyboards that do not require board
* remove out of compliance values
* use the schema to eliminate custom code
* Update docs/reference_info_json.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* make flake8 happy
* bugfix
* do not overwrite make vars from json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initial commit for my Corne keyboard layout.
* Updates to Corne, etc.
Finished working on primary layout for Corne keyboard.
Cleaned up some comments for my 4x12 Ortho layout.
* Changes for crkbd layout
* Fixed the config.h to reflect using ee_hands
* Added RGB configs to crkbd/corne layout
Co-authored-by: Ian Sterling <503326@MC02YT9K9LVCF.tld>
* add support for bigknob
Add support for bigknob macropad
* corrected files
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* corrected tap dance
* Update config.h
* correct image link
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* added GPL headers
* Update readme.md
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* added my keymap
* Tidy up
Add readme, run clang-format, remove some comments
* Fixed some formatting issues
* Update after reading PR checklist
Add GPL header to keymap.c, remove backslash in LAYOUT macro
* Use integer constants for switch labels
* Remove unneeded code, remove F-keys from raise layer
* Use program memory for some text on OLED
* Fixed left over debug code
* tidy up config.h and rules.mk
Remove all unused defines from config.h, and remove options which are the same as the keyboard level make file. Enabled command to be able to toggle NKRO.
* Sagittarius keyboard
* Update Sagittarius keyboard
* fix
* remove info.json as it's very hard to make
* Add license and address PR comments
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add info json, update keymap
* Fix info json
* Update keymap
* Update keyboards/cannonkeys/sagittarius/info.json
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initial support for Evolv75
* Fix encoder directional and layer support
* Invert knob directions
* Remove info.json and updated README
* Update keyboards/evolv/evolv.c
Update encoder_update call
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/evolv/config.h
Remove description field from USB descriptors
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Remove KC_NO define from default keymap
* Update config.h
New USB descriptor ID numbers
* Update keyboards/evolv/rules.mk
Remove words from bluetooth and audio enable comments
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/evolv/rules.mk
Enable full bootmagic
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add info.json for QMK Configurator
* Edit copyright info, add VIA initial support
* Fix KC_NO seven underscores issue in keymap definitions
* Update info.json
* Update info.json
* ANSI and ISO layouts, info.json file with both
* Reorganized layouts to match info.json order
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add proper prototypes for Tap-Hold Per Key functions
* Fix handwired/tennie default keymap
* Remove unneeded references
* Fix tapping term per key check in space cadet
* Pre-emptive fix for tap dance
* Fix marksard/leftover30
* Replace hard coded tapping term with define
* Add GKB-M16 Macro Pad
Add GKB-M16 (gkb_m16) Macro Pad under gkeyboard
* Update keyboards/gkeyboard/gkb_m16/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/gkeyboard/gkb_m16/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/gkeyboard/gkb_m16/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/gkeyboard/gkb_m16/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initial commit on new clean branch. Testing out functionality of oled and encoder for default features.
* Cleaned up the initial push and removed the fancy keymap until the extra features and functionality can be tested and made more user friendly.
* Cleaned up the readme some more, compiled and tested both default and via keymaps, and did another round of checks to prepare for starting the PR.
* Cleaning up the keymap to meet expected formatting in a couple places and also adding in the TAP_CODE_DELAY after newly encoutnered encoder issues and inconsistencies.
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/mechwild/mercutio/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Fixing json syntax.
* Update keyboards/mechwild/mercutio/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Make parameters from info.json available to the build system
* move all clueboard settings to info.json
* code formatting
* make flake8 happy
* make flake8 happy
* make qmk lint happy
* Add support for specifying led indicators in json
* move led indicators to the clueboard info.json
* Apply suggestions from code review
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* add missing docstring
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* Update ADB impelmentation in tmk_core to recent version.
Pcked from tmk_keyboard repository revision: 48d696443857512d45f9a7329e0dd0a76345860f
* Restore convenient ADB functions used in QMK port.
* Do cformat.
* Rewrite APA102 support
The APA102 source was broken by commit 16a15c1cfc as it did not include the
quantum header. This commit addresses that, as well as other issues with
transferring bytes over the SPI interface, i.e. it was not setting the
clock pin back to low after sending a bit.
The deviation when sending the end frame is kept, but updated to the
latest from the referenced project.
Finally, these changes expose the global LED brightness parameter
of the APA102. Brightness values are configurable through
`APA102_DEFAULT_BRIGHTNESS` and `APA102_MAX_BRIGHTNESS`.
* Fix typo in led brightness extern
* Move driver out of AVR directory and add delay for ARM
* Experimental APA102 support on AVR and ARM
Co-authored-by: Alde Rojas <hello@alde.io>
* Refactor apa102_send_byte() calls to a loop
* Implement io_wait function for ARM
* Move APA102 drivers to own directory, fix copyright notice
* Add APA102 keymap to handwired/onekey
* Simplify RGBLIGHT_ENABLE/DRIVER option handling
Co-authored-by: Mikkel Jeppesen <2756925+Duckle29@users.noreply.github.com>
* Add modifier state to the split transport
This adds modifier state to the i2c and serial transport for split
keyboards. The purpose of this is to allow e.g. displaying modifier
state on the slave side of a split keyboard on an oled. This adds one
byte to the data transferred between halves.
This also fixes a missing ifdef guard for BLACKLIGHT_ENABLE.
Break modifiers into real/weak/oneshot
Fix incorrect slave serial mod setting
Fix typo in serial weal mod setter
Fix build errors for the I2C code that I introduced
Code cleanup and formatting per project preferences
Correctly get oneshot mods
Fix missing braces
Remove unneeded ifdef guard
Make the added state transport optional
Add documentation for the new define to enable this feature
Fix stray grave mark
* Fix error introduced in conflict resolution
* Split dmac_desc declaration and definition
According to the official documentation[1] gcc 10 is more strict about
correct extern usage.
I've had to move the definition of dmac_desc and dmac_desc_wb from
i2c_master.h to the corresponding .c file. This could be an issue if
anyone includes the i2c_master.h file without liking with the object
file.
[1]: https://gcc.gnu.org/gcc-10/porting_to.html
* Remove the keymap_config definition from keymaps
The keymap_config def was conflicting with the one found in
tmk_core/common/magic.c. Declaring it extern in magic.c breaks a bunch
of keyboard that rely on that declaration (like the ergodox). Instead
I've removed the one found in the keymap.c of the massdrop alt.
The same change will have to be made to other keyboards.
* Disable almost all ChibiOS subsystems.
* Modify ChibiOS config updater script to fixup mcuconf include, use develop as base instead of master.
* Add default early-init bootloader to F042/F072.
* Back to 100k freq.
- Set all other ChibiOS defaults to 'off', when not targeting Proton-C
- Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output
- Modified version.h generation so that SKIP_VERSION=yes generates the same output
# QMK Breaking Changes - 2021 February 27 Changelog
## Changes Requiring User Action
The following keyboards have had their source moved within QMK:
Old Keyboard Name | New Keyboard Name
:---------------- | :----------------
bear_65 | jacky_studio/bear_65
s7_elephant/rev1 | jacky_studio/s7_elephant/rev1
s7_elephant/rev2 | jacky_studio/s7_elephant/rev2
aplx6 | aplyard/aplx6/rev1
southpaw75 | fr4/southpaw75
The [Aplyard Aplx6 rev2](https://github.com/qmk/qmk_firmware/tree/0.12.0/keyboards/aplyard/aplx6/rev1) and the [FR4Boards Unix60](https://github.com/qmk/qmk_firmware/tree/0.12.0/keyboards/fr4/unix60) have also been added as part of these changes.
Additionally, the `handwired/bluepill/bluepill70` keyboard has been removed.
## Core Changes
### ChibiOS Update and Config Migration
QMK's ChibiOS and ChibiOS-Contrib submodules have been updated to version 20.3.2.
Along with this, QMK now provides default configuration files for all commonly-supported ARM microcontrollers running on ChibiOS. As such, keyboards are now only required to define settings which differ from the defaults, thereby reducing the size of pull requests for keyboards running atop ChibiOS.
### QMK Infrastructure and Internals
Python is now required to build QMK. The minimum Python version has been increased to 3.7.
The power of `info.json` has been massively expanded. Most keyboard parameters can now be expressed in `info.json` instead of `config.h`/`rules.mk`. This should make maintaining keyboards easier, and will enable tooling that can allow non-technical users to add and maintain QMK keyboards without writing any code.
To ease migration a new command has been provided, `qmk generate-info-json -kb <keyboard>`. You can use this command to generate a complete `info.json` file for a keyboard and then remove the duplicate information from `config.h` and `rules.mk`.
Detailed example showing how to generate a new info.json and identify duplicate keys:
* Fixed up build dependencies so that generated files are made available before compiling any object files ([#11435](https://github.com/qmk/qmk_firmware/pull/11435))
* Include `stdbool.h` in `uart.h` to fix compiler errors ([#11728](https://github.com/qmk/qmk_firmware/pull/11728))
* Decouple USB events from the USB interrupt handler in ChibiOS ([#10437](https://github.com/qmk/qmk_firmware/pull/10437))
* Fixes an issue while using Backlight and External EEPROM at the same time that would cause the MCU to lock up.
* Address wake from sleep instability ([#11450](https://github.com/qmk/qmk_firmware/pull/11450))
* Fix pressing media key on a momentarily activated layer may lead to missing key up events ([#11162](https://github.com/qmk/qmk_firmware/pull/11162))
* Fix an RGB initialisation bug on Massdrop keyboards ([#12022](https://github.com/qmk/qmk_firmware/pull/12022))
* Fix file encoding errors on Windows, and layouts not correctly merging into info.json ([#12039](https://github.com/qmk/qmk_firmware/pull/12039))
### Additions and Enhancements
* Allow configuration of serial USART timeout ([#11057](https://github.com/qmk/qmk_firmware/pull/11057))
* Added Sync Timer feature for Split Common keyboards ([#10997](https://github.com/qmk/qmk_firmware/pull/10997))
* Add modifier state to the Split Common transport ([#10400](https://github.com/qmk/qmk_firmware/pull/10400))
* Add Pix keyboard by sendz (`sendyyeah/pix`) ([#11154](https://github.com/qmk/qmk_firmware/pull/11154))
* Implement option for kinetic mouse movement algorithm for mouse keys ([#6739](https://github.com/qmk/qmk_firmware/pull/6739))
* Improved Language Specific Keycodes for US International and Extended Layouts ([#11307](https://github.com/qmk/qmk_firmware/pull/11307))
* Modified `QWIIC_ENABLE` in `rules.mk` to be yes/no choice, adding `QWIIC_DRIVERS` to allow for inclusion of specific drivers ([#11426](https://github.com/qmk/qmk_firmware/pull/11426))
* Allow AVR-based keyboards to override the `bootloader_jump` function ([#11418](https://github.com/qmk/qmk_firmware/pull/11418))
* Refine RGBLight Twinkle effect to be smoother (use breathing curve) ([#11350](https://github.com/qmk/qmk_firmware/pull/11350))
* Keep track of last matrix activity ([#10730](https://github.com/qmk/qmk_firmware/pull/10730), [`ab375d3`](https://github.com/qmk/qmk_firmware/commit/ab375d3d075c105f09a1ddd0e155f178225518bc), [#11552](https://github.com/qmk/qmk_firmware/pull/11552))
* fix `matrix_io_delay()` timing in `quantum/matrix.c` ([#9603](https://github.com/qmk/qmk_firmware/pull/9603))
* Keep track of encoder activity ([#11595](https://github.com/qmk/qmk_firmware/pull/11595))
* Backport ChibiOS Audio changes from ZSA ([#11687](https://github.com/qmk/qmk_firmware/pull/11687))
* Add support for 8 buttons to mouse report ([#10807](https://github.com/qmk/qmk_firmware/pull/10807))
* Allow `post_config.h` to be implemented in userspace ([#11519](https://github.com/qmk/qmk_firmware/pull/11519))
* Adds AT90USB162 support ([#11570](https://github.com/qmk/qmk_firmware/pull/11570))
* Stop sounds when suspended ([#11553](https://github.com/qmk/qmk_firmware/pull/11553))
* Revamp spidey3 userspace and keymaps ([#11768](https://github.com/qmk/qmk_firmware/pull/11768))
* Add support for analog USBPD on STM32G4xx ([#11824](https://github.com/qmk/qmk_firmware/pull/11824))
* Master matrix can now be transported to the slave side in Split Common keyboards ([#11046](https://github.com/qmk/qmk_firmware/pull/11046))
* Refactor platform logic within `print.h` ([#11863](https://github.com/qmk/qmk_firmware/pull/11863))
* Audio system overhaul ([#11820](https://github.com/qmk/qmk_firmware/pull/11820))
* Output selection: Remove "USB and BT" option for Bluetooth ([#11940](https://github.com/qmk/qmk_firmware/pull/11940))
*`tmk_core/common/action.c`: refactor for code size; merge multiple `case`s into one ([#11943](https://github.com/qmk/qmk_firmware/pull/11943))
* Remove rules and settings from user keymaps that are already defined at keyboard level ([#11966](https://github.com/qmk/qmk_firmware/pull/11966))
### QMK Infrastructure and Internals
* bump to python 3.7 ([#11408](https://github.com/qmk/qmk_firmware/pull/11408))
*`develop` branch is now formatted as part of CI tasks ([#11893](https://github.com/qmk/qmk_firmware/pull/11893), [#11905](https://github.com/qmk/qmk_firmware/pull/11905), [#11907](https://github.com/qmk/qmk_firmware/pull/11907), [#11928](https://github.com/qmk/qmk_firmware/pull/11928), [#11936](https://github.com/qmk/qmk_firmware/pull/11936))
* Configure keyboard matrix from info.json ([#10817](https://github.com/qmk/qmk_firmware/pull/10817))
* Validate our JSON data using json_schema ([#11101](https://github.com/qmk/qmk_firmware/pull/11101))
* Use the schema to eliminate custom code ([#11108](https://github.com/qmk/qmk_firmware/pull/11108))
* Add support for specifying BOARD in `info.json` ([#11492](https://github.com/qmk/qmk_firmware/pull/11492))
* Document how to add data driven configurations ([#11502](https://github.com/qmk/qmk_firmware/pull/11502))
* Process info.json rules ahead of userspace rules ([#11542](https://github.com/qmk/qmk_firmware/pull/11542))
### RGB Matrix support for split common ([#11055](https://github.com/qmk/qmk_firmware/pull/11055)) :id=rgb-matrix-split-common
Split boards can now use RGB Matrix without defining a custom matrix.
### Teensy 3.6 support ([#12258](https://github.com/qmk/qmk_firmware/pull/12258)) :id=teensy-3-6-support
Added support for MK66F18 (Teensy 3.6) microcontroller.
### New command: qmk console ([#12828](https://github.com/qmk/qmk_firmware/pull/12828)) :id=new-command-qmk-console
A new `qmk console` command has been added for attaching to your keyboard's console. It operates similiarly to QMK Toolbox by allowing you to connect to one or more keyboard consoles to display debugging messages.
We've updated the `qmk config` command to show only the configuration items you have actually set. You can now display (almost) all of the available configuration options, along with their default values, using `qmk config -a`.
The [Function96 V2](https://github.com/qmk/qmk_firmware/tree/0.13.0/keyboards/function96/v2) has also been added as part of these changes.
The codebase for the [Durgod K320](https://github.com/qmk/qmk_firmware/tree/0.13.0/keyboards/durgod/k320) has been reworked in anticipation of additional Durgod keyboards gaining QMK support.
Additionally, the `crkbd/rev1/legacy` keyboard has been removed.
### Bootmagic Deprecation and Refactor ([#12172](https://github.com/qmk/qmk_firmware/pull/12172)) :id=bootmagic-deprecation-and-refactor
QMK has decided to deprecate the full Bootmagic feature and leave Bootmagic Lite as the only remaining option.
This pull request changes the behavior of `BOOTMAGIC_ENABLE` such that specifying `BOOTMAGIC_ENABLE = yes` enables Bootmagic Lite instead of full Bootmagic.
If attempts to use Bootmagic functionality result in unexpected behavior, check your `rules.mk` file and change the `BOOTMAGIC_ENABLE` setting to specify either `lite` or `full`.
#### Tentative Deprecation Schedule
This is the current planned roadmap for the behavior of `BOOTMAGIC_ENABLE`:
- From 2021 May 29, setting `BOOTMAGIC_ENABLE = yes` will enable Bootmagic Lite instead of full Bootmagic.
- From 2021 Aug 28, `BOOTMAGIC_ENABLE` must be either `yes`, `lite`, or `no`– setting `BOOTMAGIC_ENABLE = full` will cause compilation to fail.
- From 2021 Nov 27, `BOOTMAGIC_ENABLE` must be either `yes` or `no`– setting `BOOTMAGIC_ENABLE = lite` will cause compilation to fail.
### Removal of LAYOUT_kc ([#12160](https://github.com/qmk/qmk_firmware/pull/12160)) :id=removal-of-layout-kc
We've removed support for `LAYOUT_kc` macros, if your keymap uses one you will need to update it use a regular `LAYOUT` macro.
### Encoder callbacks are now boolean ([#12805](https://github.com/qmk/qmk_firmware/pull/12805), [#12985](https://github.com/qmk/qmk_firmware/pull/12985)) :id=encoder-callback-boolean
To allow for keyboards to override (or not) keymap level code the `encoder_update_kb` function has been changed from `void` to `bool`. You will need to update your function definition to reflect this and ensure that you return a `true` or `false` value.
* Fix connection issue in split keyboards when slave and OLED display are connected via I2C (fixes #9335) ([#11487](https://github.com/qmk/qmk_firmware/pull/11487))
* Terrazzo: Fix wrong LED Matrix function names ([#12561](https://github.com/qmk/qmk_firmware/pull/12561))
* Apply the "NO_LIMITED_CONTROLLER_CONNECT" fix to atmega16u2 ([#12482](https://github.com/qmk/qmk_firmware/pull/12482))
* Enhancement of WPM feature ([#11727](https://github.com/qmk/qmk_firmware/pull/11727))
* Add Per Key functionality for AutoShift ([#11536](https://github.com/qmk/qmk_firmware/pull/11536))
* LED Matrix: Reactive effect buffers & advanced indicators ([#12588](https://github.com/qmk/qmk_firmware/pull/12588))
* LED Matrix: support for Split keyboards ([#12633](https://github.com/qmk/qmk_firmware/pull/12633))
* add setting to enable infinite timeout for leader key ([#6580](https://github.com/qmk/qmk_firmware/pull/6580), [#12721](https://github.com/qmk/qmk_firmware/pull/12721 "Fix bad PR merge for #6580"))
* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx ([#12403](https://github.com/qmk/qmk_firmware/pull/12403))
* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) ([#12600](https://github.com/qmk/qmk_firmware/pull/12600))
* Add support for STM32F446 MCU ([#12619](https://github.com/qmk/qmk_firmware/pull/12619))
* Add STM32L433 and L443 support ([#12063](https://github.com/qmk/qmk_firmware/pull/12063))
* Added OLED fade out support ([#12086](https://github.com/qmk/qmk_firmware/pull/12086))
* New command: `qmk console` ([#12828](https://github.com/qmk/qmk_firmware/pull/12828))
* LED Matrix: Effects! ([#12651](https://github.com/qmk/qmk_firmware/pull/12651))
* Add setup, clone, and env to the list of commands we allow even with broken modules ([#12868](https://github.com/qmk/qmk_firmware/pull/12868))
* LED Matrix: Documentation ([#12685](https://github.com/qmk/qmk_firmware/pull/12685))
* Add function to allow repeated blinking of one layer ([#12237](https://github.com/qmk/qmk_firmware/pull/12237))
* Add support for up to 4 IS31FL3733 drivers ([#12342](https://github.com/qmk/qmk_firmware/pull/12342))
* Convert Encoder callbacks to be boolean functions ([#12805](https://github.com/qmk/qmk_firmware/pull/12805), [#12985](https://github.com/qmk/qmk_firmware/pull/12985))
* [Keymap] Update to Drashna keymap and user code (based on develop) ([#12936](https://github.com/qmk/qmk_firmware/pull/12936))
* Add Full-duplex serial driver for ARM boards ([#9842](https://github.com/qmk/qmk_firmware/pull/9842))
* Backlight: add defines for default level and breathing state ([#12560](https://github.com/qmk/qmk_firmware/pull/12560), [#13024](https://github.com/qmk/qmk_firmware/pull/13024))
* Add dire message about LUFA mass storage bootloader ([#13014](https://github.com/qmk/qmk_firmware/pull/13014))
### Clean-ups and Optimizations :id=core-optimizations
* Overhaul bootmagic logic to have single entrypoint ([#8532](https://github.com/qmk/qmk_firmware/pull/8532))
* Refactor of USB code within split_common ([#11890](https://github.com/qmk/qmk_firmware/pull/11890))
* Begin the process of deprecating `bin/qmk` in favor of the global CLI ([#12109](https://github.com/qmk/qmk_firmware/pull/12109))
* LED Matrix: decouple from Backlight ([#12054](https://github.com/qmk/qmk_firmware/pull/12054))
* Move gpio wait logic to wait.h ([#12067](https://github.com/qmk/qmk_firmware/pull/12067))
* LED Matrix: Clean up includes ([#12197](https://github.com/qmk/qmk_firmware/pull/12197))
* Consistently use bin/qmk when that script is called ([#12286](https://github.com/qmk/qmk_firmware/pull/12286))
* LED Matrix: Additional common_features.mk tweaks ([#12187](https://github.com/qmk/qmk_firmware/pull/12187))
* LED Matrix: Fix up eeconfig code ([#12327](https://github.com/qmk/qmk_firmware/pull/12327))
* Big quantum_keycodes cleanup ([#12249](https://github.com/qmk/qmk_firmware/pull/12249))
* Fix up builds that are now too big for `develop` branch. ([#12495](https://github.com/qmk/qmk_firmware/pull/12495))
* [Keyboard] kint36: switch to sym_eager_pk debouncing ([#12626](https://github.com/qmk/qmk_firmware/pull/12626))
* [Keyboard] kint2pp: reduce input latency by ≈10ms ([#12625](https://github.com/qmk/qmk_firmware/pull/12625))
* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. ([#12671](https://github.com/qmk/qmk_firmware/pull/12671))
* Change RGB/LED Matrix to use a simple define for USB suspend ([#12697](https://github.com/qmk/qmk_firmware/pull/12697), [#12770](https://github.com/qmk/qmk_firmware/pull/12770 "Fixing transport's led/rgb matrix suspend state logic"))
QMK (*Quantum Mechanical Keyboard*) is an open source community centered around developing computer input devices. The community encompasses all sorts of input devices, such as keyboards, mice, and MIDI devices. A core group of collaborators maintains [QMK Firmware](https://github.com/qmk/qmk_firmware), [QMK Configurator](https://config.qmk.fm), [QMK Toolbox](https://github.com/qmk/qmk_toolbox), [qmk.fm](https://qmk.fm), and this documentation with the help of community members like you.
## Get Started
Totally new to QMK? There are two ways to get started:
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Zach White