Update ISP flashing guide with pre-compiled binary (#3217)

* update flashing guide with pre-compiled binary

* Add files via upload

* Update isp_flashing_guide.md

* update file and instructions

* update instructions

docs/isp_flashing_guide.md

@@ -19,58 +19,79 @@ If you're having trouble flashing/erasing your board, and running into cryptic e
     Memory write error, use debug for more info.
     commands.c:360: Error writing memory data. (err -4)
 
-You're likely going to need to ISP flash your board/device to get it working again. Luckily, this process is pretty straight-forward, provided you have any extra programmable keyboard, Arduino, or Teensy 2.0/Teensy 2.0++. There are also dedicated ISP flashers available for this, but most cost >$15, and it's assumed that if you are googling this error, this is the first you've heard about ISP flashing, and don't have one readily available (whereas you might have some other AVR board). __We'll be using a Teensy 2.0 with Windows 10 in this guide__ - if you are comfortable doing this on another system, please consider editing this guide and contributing those instructions!
+You're likely going to need to ISP flash your board/device to get it working again. Luckily, this process is pretty straight-forward, provided you have any extra programmable keyboard, Pro Micro, or Teensy 2.0/Teensy 2.0++. There are also dedicated ISP flashers available for this, but most cost >$15, and it's assumed that if you are googling this error, this is the first you've heard about ISP flashing, and don't have one readily available (whereas you might have some other AVR board). __We'll be using a Teensy 2.0 or Pro Micro with Windows 10 in this guide__ - if you are comfortable doing this on another system, please consider editing this guide and contributing those instructions!   
 
 ## Software Needed
 
-* [The Arduino IDE](https://www.arduino.cc/en/Main/Software)
-* [Teensyduino](https://www.pjrc.com/teensy/td_download.html) (if you're using a Teensy)
-* [WinAVR](http://www.ladyada.net/learn/avr/setup-win.html) (Windows)
+* [Teensy Loader](https://www.pjrc.com/teensy/loader.html) (if using a Teensy)
+* QMK Toolbox (flash as usual - be sure to select the correct MCU) or `avrdude` via [WinAVR](http://www.ladyada.net/learn/avr/setup-win.html) (for Teensy & Pro Micro)
 
 ## Wiring
 
 This is pretty straight-forward - we'll be connecting like-things to like-things in the following manner:
 
-    Flasher B0  <-> Keyboard RESET
-    Flasher B1  <-> Keyboard B1 (SCLK)
-    Flasher B2  <-> Keyboard B2 (MOSI)
-    Flasher B3  <-> Keyboard B3 (MISO)
-    Flasher VCC <-> Keyboard VCC
-    Flasher GND <-> Keyboard GND
+### Teensy 2.0
 
-## The ISP Firmware
+    Teensy B0  <-> Keyboard RESET
+    Teensy B1  <-> Keyboard B1 (SCLK)
+    Teensy B2  <-> Keyboard B2 (MOSI)
+    Teensy B3  <-> Keyboard B3 (MISO)
+    Teensy VCC <-> Keyboard VCC
+    Teensy GND <-> Keyboard GND
+    
+### Pro Micro
+
+    Pro Micro 10 (B6)  <-> Keyboard RESET
+    Pro Micro 15 (B1)  <-> Keyboard B1 (SCLK)
+    Pro Micro 16 (B2)  <-> Keyboard B2 (MOSI)
+    Pro Micro 14 (B3)  <-> Keyboard B3 (MISO)
+    Pro Micro VCC      <-> Keyboard VCC
+    Pro Micro GND      <-> Keyboard GND
+
+## The ISP Firmware (now pre-compiled)
+
+The only difference between the .hex files below is which pin is connected to RESET. You can use them on other boards as well, as long as you're aware of the pins being used. If for some reason neither of these pins are available, [create an issue](https://github.com/qmk/qmk_firmware/issues/new), and we can generate one for you!
+
+* Teensy 2.0: [`util/teensy_2.0_ISP_B0.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/teensy_2.0_ISP_B0.hex) (`B0`)
+* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_mico_ISP_B6_10.hex) (`B6/10`)
+
+**Flash your Teenys/Pro Micro with one of these and continue - you won't need the file after flashing your ISP device.**
+
+## Just the Bootloader File
+
+If you just want to get things back to normal, you can flash only a bootloader from [`util/` folder](https://github.com/qmk/qmk_firmware/tree/master/util), and use your normal process to flash the firmware afterwards. Be sure to flash the correct bootloader for your chip:
+
+* [`atmega32u4`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1_0_0.hex) - Most keyboards, Planck Rev 1-5, Preonic Rev 1-2
+* [`at90usb1286`](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128x_1_0_1.hex) - Planck Light Rev 1
+
+If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU =` line will have the value you need. It may differ between different versions of the board.
+
+### Advanced/Production Techniques
+
+If you'd like to flash both the bootloader **and** the regular firmware at the same time, you need to combine the files. 
+
+1. Open the original firmware .hex file in a text editor
+2. Remove the last line (which should be `:00000001FF` - this is an EOF message)
+3. Copy the entire bootloader's contents onto a new line (with no empty lines between) and paste it at the end of the original file
+4. Save it as a new file by naming it `<keyboard>_<keymap>_production.hex`
+
+It's possible to use other bootloaders here in the same way, but __you need a bootloader__, otherwise you'll have to use ISP again to write new firmware to your keyboard.
+
+## Flashing Your Bootloader/Production File
 
 Make sure your keyboard is unplugged from any device, and plug in your Teensy.
 
-1. Run Arduino after you have everything installed
-2. Select `Tools > Board * > Teensy 2.0`
-3. Click `File > Examples > 11.ArduinoISP > ArduinoISP`
+### QMK Toolbox
 
-Then scroll down until you see something that looks like this block of code:
+1. `AVRISP device connected` will show up in yellow
+2. Select the correct bootloader/production .hex file with the `Open` dialog (spaces can't be in the path)
+3. Be sure the correct `Microcontroller` option is selected
+4. Hit `Flash`
+5. Wait, as nothing will output for a while, especially with production files
 
-    // Configure which pins to use:
+If the verification and fuse checks are ok, you're done! Your board may restart automatically, otherwise, unplug your Teensy and plug in your keyboard - you can leave your Teensy wired to your keyboard while testing things, but it's recommended that you desolder it/remove the wiring once you're sure everything works.
 
-    // The standard pin configuration.
-    #ifndef ARDUINO_HOODLOADER2
-
-    #define RESET     0  // Use 0 (B0) instead of 10
-    #define LED_HB    11 // Use 11 (LED on the Teensy 2.0)
-    #define LED_ERR   8  // This won't be used unless you have an LED hooked-up to 8 (D3)
-    #define LED_PMODE 7  // This won't be used unless you have an LED hooked-up to 7 (D2)
-
-And make the changes in the last four lines. If you're using something besides the Teensy 2.0, you'll want to choose something else that makes sense for `LED_HB`. We define `RESET` as `0`/`B0` because that's what's close - if you want to use another pin for some reason, [you can use the pinouts to choose something else](https://www.pjrc.com/teensy/pinout.html).
-
-Once you've made your changes, you can click the Upload button (right arrow), which will open up the Teensy flasher app - you'll need to press the reset button on the Teensy the first time, but after that, it's automatic (you shouldn't be flashing this more than once, though). Once flashed, the orange LED on the Teensy will flash on and off, indicating it's ready for some action.
-
-## The `.hex` File
-
-Before flashing your firmware, you're going to need to and do a little preparation. We'll be appending [this bootloader (also a .hex file)](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1_0_0.hex) to the end of our firmware by opening the original .hex file in a text editor, and removing the last line, which should be `:00000001FF` (this is an EOF message). After that's been removed, copy the entire bootloader's contents and paste it at the end of the original file, and save it.
-
-It's possible to use other bootloaders here in the same way, but __you need a bootloader__, otherwise you'll have to ISP to write new firmware to your keyboard.
-
-## Flashing Your Firmware
-
-Make sure your keyboard is unplugged from any device, and plug in your Teensy.
+### Command Line
 
 Open `cmd` and navigate to your where your modified .hex file is. We'll pretend this file is called `main.hex`, and that your Teensy 2.0 is on the `COM3` port - if you're unsure, you can open your Device Manager, and look for `Ports > USB Serial Device`. Use that COM port here. You can confirm it's the right port with:
 

keyboards/1up60rgb/readme.md

@@ -4,7 +4,7 @@ Firmware for custom keyboard PCB with 60% key layout.
 
 Keyboard Maintainer: [rempired](https://github.com/rempired)  
 Hardware Supported: 1upkeyboards 60% RGB  
-Hardware Availability: [1upkeyboards](https://1upkeyboards.com/rgb-underglow-1up-pcb.html)
+Hardware Availability: [1upkeyboards](https://www.1upkeyboards.com/shop/controllers/1up-rgb-underglow-pcb/)  
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/4x4/4x4.c

@@ -0,0 +1,29 @@
+
+#include "4x4.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/4x4/4x4.h

@@ -0,0 +1,62 @@
+
+#ifndef FOURX4_H
+#define FOURX4_H
+
+#include "quantum.h"
+#define ___ KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define LAYOUT_ortho_4x4( \
+    K00, K01, K02, K03, \
+    K10, K11, K12, K13, \
+    K20, K21, K22, K23, \
+    K30, K31, K32, K33 \
+) \
+{ \
+    { K00, K01, K02, K03, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K10, K11, K12, K13, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K20, K21, K22, K23, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K30, K31, K32, K33, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___} \
+}
+#define LAYOUT_ortho_4x8( \
+    K00, K01, K02, K03, K04, K05, K06, K07, \
+    K10, K11, K12, K13, K14, K15, K16, K17, \
+    K20, K21, K22, K23, K24, K25, K26, K27, \
+    K30, K31, K32, K33, K34, K35, K36, K37\
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, ___, ___, ___, ___, ___, ___, ___, ___}, \
+    { K30, K31, K32, K33, K34, K35, K35, K37, ___, ___, ___, ___, ___, ___, ___, ___} \
+}
+#define LAYOUT_ortho_4x12( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b  \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, ___, ___, ___, ___}, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, ___, ___, ___, ___}, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, ___, ___, ___, ___}, \
+    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, K3a, K3b, ___, ___, ___, ___} \
+}
+
+#define LAYOUT_ortho_4x16( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e, K0f, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e, K1f, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, K2f, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e, K3f \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e, K0f }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e, K1f }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, K2f }, \
+    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, K3a, K3b, K3c, K3d, K3e, K3f } \
+}
+
+#endif

keyboards/4x4/config.h

@@ -0,0 +1,202 @@
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x4444
+#define MANUFACTURER    di0ib
+#define PRODUCT         The 4x4 Keyboard
+#define DESCRIPTION     A modular compact keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B2, D1, D0, D4 }
+#define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 }
+#define UNUSED_PINS
+
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN C7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+

keyboards/4x4/keymaps/default/config.h

@@ -0,0 +1,5 @@
+
+
+#pragma once
+
+// place overrides here

keyboards/4x4/keymaps/default/keymap.c

@@ -0,0 +1,124 @@
+
+#include QMK_KEYBOARD_H
+
+#define PAD 0
+#define _QW 1
+#define NUM 2
+#define DIR 3
+
+// Readability keycodes
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Single 4x4 board only
+ * .-----------------------------------.
+ * |   7    |   8    |   9    |   /    |
+ * |--------+--------+--------+--------|
+ * |   4    |   5    |   6    |   *    |
+ * |--------+--------+--------+--------|
+ * |   1    |   2    |   3    |   -    |
+ * |--------+--------+--------+--------|
+ * |   0    | QWERTY |   .    |   +    |
+ * '-----------------------------------'
+ */
+
+  [PAD] = LAYOUT_ortho_4x4(
+  KC_KP_7, KC_KP_8, KC_KP_9,   KC_PSLS,
+  KC_KP_4, KC_KP_5, KC_KP_6,   KC_PAST,
+  KC_KP_1, KC_KP_2, KC_KP_3,   KC_PMNS,
+  KC_KP_0, DF(_QW), KC_KP_DOT, KC_PPLS
+  ),
+
+/* QWERTY
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | BACKSP |   7    |   8    |   9    |   /    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | TAB    | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      |   4    |   5    |   6    |   *    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | SHIFT  | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | ENT/SFT|   1    |   2    |   3    |   -    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | LCTRL  | LGUI   | ALT    | ALT    | NUM    | SHIFT  | SPACE  | DIR    | RGUI   | RALT   | DEL    | CTRL   |   0    |   0    |   .    |   +    |
+ * '-----------------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_QW] = LAYOUT_ortho_4x16(
+  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, KC_KP_7, KC_KP_8, KC_KP_9, KC_PSLS,
+  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_KP_4, KC_KP_5, KC_KP_6, KC_PAST,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_T(KC_ENT), KC_KP_1, KC_KP_2, KC_KP_3, KC_PMNS,
+  KC_LCTL, KC_LGUI, KC_LALT, KC_LALT, MO(NUM), KC_LSFT, KC_SPC,  MO(DIR), KC_RGUI, KC_RALT, KC_DEL,  KC_RCTL, KC_KP_0, KC_KP_0, KC_KP_DOT, KC_PPLS
+  ),
+
+/* NUMBERS
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------.
+ * |        | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | NUMLOCK|   /    |   *    |   -    |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |    `   | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      |        |        |        |   +    |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | F11    | F12    |        |        |        | ENTER  | SHIFT  | RGUI   | ./ALT  | BKSC   |        |        |        | ENTER  |        |
+ * |        |        |        |        |        |        |        |        |        |        |CTRLhold|		   |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|        |
+ * |        |        |        |        |        |        | ENTER  | SHIFT  |        |        |        |        |        |        |        |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [NUM] = LAYOUT_ortho_4x16(
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, _______,
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     _______, _______, _______, KC_PPLS, _______,
+  _______, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT, _______,
+  _______, _______, _______, _______, _______, _______, KC_ENT,  KC_RSFT, _______, _______, _______,  _______, _______, _______, _______, _______
+  ),
+
+/* DIRECTIONS
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------.
+ * | RESET  | TAB    |   up   |        | INS    | CTRL   | SHIFT  | PgUp   | Home   |   -    |   =    |  DEL   |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | CAPSLK | left   |  down  | right  | PrScr  | SHIFT  | CTRL   | PgDn   | End    |   [    |   ]    |   \    |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | P-Brk  |        |        |        |        |        |        | RGUI   | ALT    |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | KEYPAD |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * '-----------------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [DIR] = LAYOUT_ortho_4x16(
+  RESET,   KC_TAB,  KC_UP,   _______, KC_INS,  KC_LCTL, KC_LSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL,  KC_DEL,  _______, _______, _______, _______,
+  KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_LCTL, KC_PGDN, KC_END,  KC_LBRC, KC_RBRC, KC_BSLS, _______, _______, _______, _______,
+  _______, KC_PAUS, _______, _______, _______, _______, _______, _______, KC_RGUI, KC_RALT, _______, _______, _______, _______, _______, _______,
+  DF(PAD), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  ),
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  keyevent_t event = record->event;
+    (void)event;
+
+  switch (id) {
+
+  }
+  return MACRO_NONE;
+}
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/4x4/readme.md

@@ -0,0 +1,23 @@
+# 4x4
+
+![4x4](https://2.bp.blogspot.com/-xRZOpwlTT4c/WlOwRIVAecI/AAAAAAACKo4/d75juHTX2W0Nrch7NigssMbagvl3I4w_ACEwYBhgL/s1600/e.jpg)
+===
+
+**Modular keypad/keyboard**  
+The basic unit is a 4x4 matrix with 16 keys. Up to 4 of these can be connected to each other side by side.  
+4x4, 4x8, 4x12 and 4x16 are possible.  
+There are pads for header pins on each side that complete the circuits from board to board. These can be permanently connected with solder bridges or temporarily with pin headers and shunt jumpers.  
+**_All configurations are powered by a SINGLE Arduino Micro or clone (NOT a Pro Micro)._**  
+
+* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/4x4)
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: 4x4 PCB  
+Hardware Availability: [4x4x4x4x4 project on 40% Keyboards](http://www.40percent.club/2018/01/4x4x4x4x4.html)  
+
+Make example for this keyboard (after setting up your build environment):  
+
+    make 4x4:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.  
+First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development.  

keyboards/4x4/rules.mk

@@ -0,0 +1,74 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUT = ortho_4x4  ortho_4x8  ortho_4x12  ortho_4x16 

keyboards/converter/m0110_usb/README.md

@@ -0,0 +1,51 @@
+M0110(A) keyboard converter
+======================================
+This is a port of the original M0110 converter from TMK to QMK. The original converter was designed to work with **ATmega32U2** and **ATmega32U4** based microcontrollers to convert Apple M0110/M0110A keyboards and M0120 numpads to USB. This port has been tested to be compatible with the [**Adafruit Feather 32U4 BLE**](https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le).
+
+
+### Enabling Bluetooth for the Adafruit Feather 32U4 BLE
+----------------------------------------------------
+Simply add `BLUETOOTH = AdafruitBLE` to your `rules.mk` file. This enables code specifically for the Adafruit Feather 32U4 BLE. If enabled, the device will use the `PRODUCT` and `DESCRIPTION` values from `config.h` for the device name displayed by the Feather on host devices. You can simply change these values to change the device name.
+
+
+### Pins
+----
+This port utilizes the same pins that the TMK converter used. `PD1` is used for `CLOCK` and `PD0` is used for the `DATA` from the keyboard. These pins can be changed in `config.h`.
+
+
+### Other important hardware notes from the original TMK converter Readme:
+>### Hardware
+>--------
+>You can buy preassembled [TMK converter] or make yourown with AVR dev board like PJRC [Teensy].
+>
+>Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`.
+>
+>[![M0110 Converter](http://i.imgur.com/yEp2eRim.jpg)](http://i.imgur.com/yEp2eRi.jpg)
+>
+>#### 4P4C phone handset cable
+>Note that original cable used with Mac is **straight** while phone handset cable is **crossover**.
+>
+><http://en.wikipedia.org/wiki/Modular_connector#4P4C>
+>
+>[Teensy]: http://www.pjrc.com/teensy/
+>[TMK converter]: https://geekhack.org/index.php?topic=72052.0
+>
+>
+>#### Socket Pinout
+>- <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml>
+>
+>![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png)
+>
+>
+>#### Pull-up Resistor
+>You may need pull-up resistors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK >for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors.
+>
+
+[**View the original TMK converter Readme**](https://github.com/tmk/tmk_keyboard/tree/master/converter/m0110_usb)\
+[**View the original TMK converter Repository**](https://github.com/tmk/tmk_keyboard/tree/master/converter/m0110_usb)
+
+
+### QMK Port Changelog
+---------
+- 2018/08/01 - Original Release
+

keyboards/converter/m0110_usb/config.h

@@ -0,0 +1,59 @@
+/*
+Copyright 2011,2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+--------------
+
+Ported to QMK by Techsock <info@techsock.com>
+*/
+
+#pragma once
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0110
+#define DEVICE_VER      0x0101
+#define MANUFACTURER    Apple
+#define PRODUCT         M0110(A)
+#define DESCRIPTION     Converts M0110(A) to USB and/or BT
+
+/* matrix size */
+#define MATRIX_ROWS 14
+#define MATRIX_COLS 8
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* magic key */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LGUI)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LCTL)) \
+)
+
+/* boot magic key */
+#define BOOTMAGIC_KEY_SALT                      KC_M
+
+/* ports */
+#define M0110_CLOCK_PORT        PORTD
+#define M0110_CLOCK_PIN         PIND
+#define M0110_CLOCK_DDR         DDRD
+#define M0110_CLOCK_BIT         1
+#define M0110_DATA_PORT         PORTD
+#define M0110_DATA_PIN          PIND
+#define M0110_DATA_DDR          DDRD
+#define M0110_DATA_BIT          0
+
+

keyboards/converter/m0110_usb/keymaps/default/keymap.c

@@ -0,0 +1,92 @@
+/*
+Copyright 2011,2012,2015 Jun Wako <wakojun@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+--------------
+
+Ported to QMK by Techsock <info@techsock.com>
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	/* Default:
+	 * M0110                                                       M0120
+	 * ,---------------------------------------------------------. ,---------------.
+	 * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Nlk|  =|  /|  *|
+	 * |---------------------------------------------------------| |---------------|
+	 * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \| |  7|  8|  9|  -|
+	 * |---------------------------------------------------------| |---------------|
+	 * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
+	 * |---------------------------------------------------------| |---------------|
+	 * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift   | |  1|  2|  3|   |
+	 * `---------------------------------------------------------' |-----------|Ent|
+	 *      |Opt|Mac |         Space               |Fn  |Opt|      |      0|  .|   |
+	 *      `-----------------------------------------------'      `---------------'
+	 * M0110A
+	 * ,---------------------------------------------------------. ,---------------.
+	 * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Nlk|  =|  /|  *|
+	 * |---------------------------------------------------------| |---------------|
+	 * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
+	 * |-----------------------------------------------------'   | |---------------|
+	 * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
+	 * |---------------------------------------------------------| |---------------|
+	 * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shft|Up | |  1|  2|  3|   |
+	 * |---------------------------------------------------------| |-----------|Ent|
+	 * |Opt  |Mac    |         Space             |  \|Lft|Rgt|Dn | |      0|  .|   |
+	 * `---------------------------------------------------------' `---------------'
+	 */
+
+	[0] = LAYOUT_ansi(
+	       KC_GRV,  KC_1,    KC_2, KC_3, KC_4, KC_5,   KC_6, KC_7, KC_8,    KC_9,   KC_0,             KC_MINS, KC_EQL,  KC_BSPC,  KC_NLCK, KC_EQL, KC_PSLS, KC_PAST, \
+	       KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T,   KC_Y, KC_U, KC_I,    KC_O,   KC_P,             KC_LBRC, KC_RBRC,           KC_P7,   KC_P8,  KC_P9,   KC_PMNS, \
+	       KC_LCAP, KC_A,    KC_S, KC_D, KC_F, KC_G,   KC_H, KC_J, KC_K,    KC_L,   KC_SCLN,          KC_QUOT,          KC_ENT,   KC_P4,   KC_P5,  KC_P6,   KC_PPLS, \
+	       KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B,   KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,                            KC_UP,    KC_P1,   KC_P2,  KC_P3,   KC_PENT, \
+	       KC_LALT, KC_LGUI,                   KC_SPC,                      MO(1),  LT(1, KC_BSLASH), KC_LEFT, KC_RGHT, KC_DOWN,  KC_P0,           KC_PDOT),
+		
+	
+	/* Cursor Layer:
+	 * M0110                                                       M0120
+	 * ,---------------------------------------------------------. ,---------------.
+	 * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|  =|  /|  *|
+	 * |---------------------------------------------------------| |---------------|
+	 * |Tab  |Hom| Up|PgU|Rst|   |   |   |Psc|Slk|Pau|Up |INS|   | |  7|  8|  9|  -|
+	 * |---------------------------------------------------------| |---------------|
+	 * |Ctrl  |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Return| |  4|  5|  6|  +|
+	 * |---------------------------------------------------------| |---------------|
+	 * |Shift   |End|   |PgD|   |   |   |   |End|PgD|Dow|Shift   | |  1|  2|  3|   |
+	 * `---------------------------------------------------------' |-----------|Ent|
+	 *      |Opt|Mac |         Space               |Fn  |Opt|      |      0|  .|   |
+	 *      `-----------------------------------------------'      `---------------'
+	 * M0110A
+	 * ,---------------------------------------------------------. ,---------------.
+	 * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|  =|  /|  *|
+	 * |---------------------------------------------------------| |---------------|
+	 * |Tab  |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |INS|   | |  7|  8|  9|  -|
+	 * |-----------------------------------------------------'   | |---------------|
+	 * |Caps  |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Return| |  4|  5|  6|  +|
+	 * |---------------------------------------------------------| |---------------|
+	 * |Ctrl    |End|   |PgD|   |   |   |   |End|PgD|Dow|Shft|PgU| |  1|  2|  3|   |
+	 * |---------------------------------------------------------| |-----------|Ent|
+	 * |Opt  |Mac    |         Space             |  \|Hom|End|PgD| |      0|  .|   |
+	 * `---------------------------------------------------------' `---------------'
+	 */
+	
+	[1] = LAYOUT_ansi(
+	       KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4, KC_F5, KC_F6, KC_F7, KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, KC_DEL,   KC_NLCK, KC_EQL, KC_PSLS, KC_PAST, \
+		   KC_TAB,  KC_HOME, KC_UP,   KC_PGUP, RESET, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   KC_INS,           KC_P7,   KC_P8,  KC_P9,   KC_PMNS, \
+		   KC_LCAP, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,         KC_ENT,   KC_P4,   KC_P5,  KC_P6,   KC_PPLS, \
+		   KC_LCTL, KC_END,  KC_NO,   KC_PGDN, KC_NO, KC_NO, KC_NO, KC_NO, KC_END,  KC_PGDN, KC_DOWN,                  KC_PGUP,  KC_P1,   KC_P2,  KC_P3,   KC_PENT, \
+	       KC_LALT, KC_LGUI,                          KC_SPC,                       KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_PGDN,  KC_P0,           KC_PDOT),
+
+};

keyboards/converter/m0110_usb/m0110_usb.c

@@ -0,0 +1,3 @@
+#include "m0110_usb.h"
+#include <avr/io.h>
+#include "quantum.h"

keyboards/converter/m0110_usb/m0110_usb.h

@@ -0,0 +1,131 @@
+/*
+Copyright 2011,2012,2014,2015 Jun Wako <wakojun@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+--------------
+
+Ported to QMK by Techsock <info@techsock.com>
+*/
+
+#ifndef M0110_USB_H
+#define M0110_USB_H
+#endif
+
+#include "quantum.h"
+
+/* Common layout for M0110 and M0110A
+ * This keymap works with both keyboards. As you can see, the M0110A is 
+ * a superset of M0110 keyboard, only one exception is 'Enter'(34) of M0110
+ * does not exist on the M0110A.
+ *
+ * ,---------------------------------------------------------. ,---------------.
+ * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  =|  /|  *|
+ * |---------------------------------------------------------| |---------------|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
+ * |-----------------------------------------------------'   | |---------------|
+ * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
+ * |---------------------------------------------------------| |---------------|
+ * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
+ * |---------------------------------------------------------| |-----------|Ent|
+ * |Opt  |Mac    |         Space         |Ent|  \|Lft|Rgt|Dn | |      0|  .|   |
+ * `---------------------------------------------------------' `---------------'
+ *
+ * M0110A scan codes
+ * ,---------------------------------------------------------. ,---------------.
+ * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18|   33| | 47| 68| 6D| 62|
+ * |---------------------------------------------------------| |---------------|
+ * |   30| 0C| 0D| 0E| 0F| 11| 10| 20| 22| 1F| 23| 21| 1E|   | | 59| 5B| 5C| 4E|
+ * |-----------------------------------------------------'   | |---------------|
+ * |    39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27|    24| | 56| 57| 58| 66|
+ * |---------------------------------------------------------| |---------------|
+ * |      38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C|  38| 4D| | 53| 54| 55|   |
+ * `---------------------------------------------------------' |-----------| 4C|
+ * |   3A|     37|             31            | 2A| 46| 42| 48| |     52| 41|   |
+ * `---------------------------------------------------------' `---------------'
+ *
+ * M0110 + M0120 scan codes
+ * ,---------------------------------------------------------. ,---------------.
+ * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18|   33| | 47| 68| 6D| 62|
+ * |---------------------------------------------------------| |---------------|
+ * |   30| 0C| 0D| 0E| 0F| 11| 10| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E|
+ * |---------------------------------------------------------| |---------------|
+ * |    39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27|    24| | 56| 57| 58| 66|
+ * |---------------------------------------------------------| |---------------|
+ * |      38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C|      38| | 53| 54| 55|   |
+ * `---------------------------------------------------------' |-----------| 4C|
+ *      | 3A|  37|             31              |   34| 3A|     |     52| 41|   |
+ *      `------------------------------------------------'     `---------------'
+ * Two right and left keys of 38 and 3A are identical, you cannot discriminate those two.
+ */
+#define LAYOUT_ansi( \
+    K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33,  K47,K68,K6D,K62, \
+    K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,      K59,K5B,K5C,K4E, \
+    K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,    K24,  K56,K57,K58,K66, \
+    K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,        K4D,  K53,K54,K55,K4C, \
+    K3A,K37,            K31,            K34,K2A,K46,K42,K48,  K52,    K41      \
+) { \
+    { K00,    K01,    K02,    K03,    K04,    K05,    K06,    K07   }, \
+    { K08,    K09,    KC_NO,  K0B,    K0C,    K0D,    K0E,    K0F   }, \
+    { K10,    K11,    K12,    K13,    K14,    K15,    K16,    K17   }, \
+    { K18,    K19,    K1A,    K1B,    K1C,    K1D,    K1E,    K1F   }, \
+    { K20,    K21,    K22,    K23,    K24,    K25,    K26,    K27   }, \
+    { K28,    K29,    K2A,    K2B,    K2C,    K2D,    K2E,    K2F   }, \
+    { K30,    K31,    K32,    K33,    K34,    KC_NO,  KC_NO,  K37   }, \
+    { K38,    K39,    K3A,    KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO }, \
+    { KC_NO,  K41,    K42,    KC_NO,  KC_NO,  KC_NO,  K46,    K47   }, \
+    { K48,    KC_NO,  KC_NO,  KC_NO,  K4C,    K4D,    K4E,    KC_NO }, \
+    { KC_NO,  KC_NO,  K52,    K53,    K54,    K55,    K56,    K57   }, \
+    { K58,    K59,    KC_NO,  K5B,    K5C,    KC_NO,  KC_NO,  KC_NO }, \
+    { KC_NO,  KC_NO,  K62,    KC_NO,  KC_NO,  KC_NO,  K66,    KC_NO }, \
+    { K68,    KC_NO,  KC_NO,  KC_NO,  KC_NO,  K6D,    KC_NO,  KC_NO }, \
+}
+
+/* International keyboard layout for M0110 + M0120
+ * https://en.wikipedia.org/wiki/File:Apple_Macintosh_Plus_Keyboard.jpg
+ * Probably International keyboard layout of M0110A doesn't exist.
+ *
+ * M0110 + M0120 scan codes
+ * ,---------------------------------------------------------. ,---------------.
+ * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18|   33| | 47| 68| 6D| 62|
+ * |---------------------------------------------------------| |---------------|
+ * |   30| 0C| 0D| 0E| 0F| 11| 10| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E|
+ * |------------------------------------------------------,  | |---------------|
+ * |    39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24|  | | 56| 57| 58| 66|
+ * |---------------------------------------------------------| |---------------|
+ * |  38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A|      38| | 53| 54| 55|   |
+ * `---------------------------------------------------------' |-----------| 4C|
+ *      | 3A|  37|             34              |   31| 3A|     |     52| 41|   |
+ *      `------------------------------------------------'     `---------------'
+ * Two right and left keys of 38 and 3A are identical, you cannot discriminate those two.
+ */
+#define LAYOUT_iso( \
+    K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33,  K47,K68,K6D,K62, \
+    K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A,  K59,K5B,K5C,K4E, \
+    K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,K24,      K56,K57,K58,K66, \
+    K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,K0A,          K53,K54,K55,K4C, \
+        K3A,K37,            K34,                K31,          K52,    K41      \
+) { \
+    { K00,    K01,    K02,    K03,    K04,    K05,    K06,    K07   }, \
+    { K08,    K09,    K0A,    K0B,    K0C,    K0D,    K0E,    K0F   }, \
+    { K10,    K11,    K12,    K13,    K14,    K15,    K16,    K17   }, \
+    { K18,    K19,    K1A,    K1B,    K1C,    K1D,    K1E,    K1F   }, \
+    { K20,    K21,    K22,    K23,    K24,    K25,    K26,    K27   }, \
+    { K28,    K29,    K2A,    K2B,    K2C,    K2D,    K2E,    K2F   }, \
+    { K30,    K31,    K32,    K33,    K34,    KC_NO,  KC_NO,  K37   }, \
+    { K38,    K39,    K3A,    KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO }, \
+    { KC_NO,  K41,    KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  K47   }, \
+    { KC_NO,  KC_NO,  KC_NO,  KC_NO,  K4C,    KC_NO,  K4E,    KC_NO }, \
+    { KC_NO,  KC_NO,  K52,    K53,    K54,    K55,    K56,    K57   }, \
+    { K58,    K59,    KC_NO,  K5B,    K5C,    KC_NO,  KC_NO,  KC_NO }, \
+    { KC_NO,  KC_NO,  K62,    KC_NO,  KC_NO,  KC_NO,  K66,    KC_NO }, \
+    { K68,    KC_NO,  KC_NO,  KC_NO,  KC_NO,  K6D,    KC_NO,  KC_NO }, \
+}

keyboards/converter/m0110_usb/matrix.c

@@ -0,0 +1,121 @@
+/*
+Copyright 2011,2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+--------------
+
+Ported to QMK by Techsock <info@techsock.com>
+*/
+
+#include <stdint.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "debug.h"
+#include "host.h"
+#include "m0110.h"
+#include "matrix.h"
+#include "report.h"
+#include "timer.h"
+
+
+#define CAPS        0x39
+#define CAPS_BREAK  (CAPS | 0x80)
+#define ROW(key)    ((key)>>3&0x0F)
+#define COL(key)    ((key)&0x07)
+
+
+static bool is_modified = false;
+
+// matrix state buffer(1:on, 0:off)
+static uint8_t *matrix;
+static uint8_t _matrix0[MATRIX_ROWS];
+
+static void register_key(uint8_t key);
+
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+void matrix_init(void)
+{
+    m0110_init();
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
+    matrix = _matrix0;
+
+	matrix_init_quantum();
+    return;
+}
+
+uint8_t matrix_scan(void)
+{
+    uint8_t key;
+
+    is_modified = false;
+    key = m0110_recv_key();
+
+    if (key == M0110_NULL) {
+        return 0;
+    } else if (key == M0110_ERROR) {
+        return 0;
+    } else {
+        is_modified = true;
+        register_key(key);
+    }
+
+    if (debug_enable) {
+        print("["); phex(key); print("]\n");
+    }
+    
+    matrix_scan_quantum();
+    return 1;
+}
+
+void matrix_print(void){
+
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+inline
+static void register_key(uint8_t key)
+{
+    if (key&0x80) {
+        matrix[ROW(key)] &= ~(1<<COL(key));
+    } else {
+        matrix[ROW(key)] |=  (1<<COL(key));
+    }
+}

keyboards/converter/m0110_usb/rules.mk

@@ -0,0 +1,73 @@
+# MCU name
+# atmega32u4 	Teensy2.0
+# atemga32u4	TMK Converter rev.1
+# atemga32u2	TMK Converter rev.2
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+#
+#F_CPU = 16000000
+F_CPU = 8000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096	for TMK Converter rev.1/rev.2
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE	= no			# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE		= no			# Mouse keys(+4700)
+CONSOLE_ENABLE		= yes			# Console for debug(+400)
+COMMAND_ENABLE		= no  			# Commands for debug and configuration
+SLEEP_LED_ENABLE 	= no  			# Breathing sleep LED during USB suspend
+NKRO_ENABLE 		= no			# USB Nkey Rollover - not yet supported in LUFA
+EXTRAKEY_ENABLE		= yes	
+USB_HID_ENABLE 		= yes
+BACKLIGHT_ENABLE 	= no
+#BLUETOOTH 			= AdafruitBLE   # For Adafruit Feather 32U4 BLE support, uncomment this line
+
+CUSTOM_MATRIX = yes
+SRC = matrix.c \
+      m0110.c

keyboards/dz60/dz60.h

@@ -49,6 +49,20 @@
 	{ KC_NO, K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, KC_NO, KC_NO }  \
 }
 
+#define LAYOUT_60_hhkb( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+	      K401,       K403,             K406,                         K411,       K413  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
+	{ KC_NO, K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, KC_NO, K411,  KC_NO, K413,  KC_NO }  \
+}
+
 #define LAYOUT_2_shifts( \
 	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
 	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \

keyboards/dz60/info.json

@@ -37,6 +37,10 @@
       "key_count": 62,
       "layout": [{"label":"¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
     },
+    "LAYOUT_60_hhkb": {
+      "key_count": 60,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"label":"\\", "x":13, "y":0}, {"label":"`", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
+    },
     "LAYOUT_directional_625_space": {
       "key_count": 65,
       "layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2, "y":0}, {"label":"K003", "x":3, "y":0}, {"label":"K004", "x":4, "y":0}, {"label":"K005", "x":5, "y":0}, {"label":"K006", "x":6, "y":0}, {"label":"K007", "x":7, "y":0}, {"label":"K008", "x":8, "y":0}, {"label":"K009", "x":9, "y":0}, {"label":"K010", "x":10, "y":0}, {"label":"K011", "x":11, "y":0}, {"label":"K012", "x":12, "y":0}, {"label":"K013", "x":13, "y":0}, {"label":"K014", "x":14, "y":0}, {"label":"K100", "x":0, "y":1, "w":1.5}, {"label":"K102", "x":1.5, "y":1}, {"label":"K103", "x":2.5, "y":1}, {"label":"K104", "x":3.5, "y":1}, {"label":"K105", "x":4.5, "y":1}, {"label":"K106", "x":5.5, "y":1}, {"label":"K107", "x":6.5, "y":1}, {"label":"K108", "x":7.5, "y":1}, {"label":"K109", "x":8.5, "y":1}, {"label":"K110", "x":9.5, "y":1}, {"label":"K111", "x":10.5, "y":1}, {"label":"K112", "x":11.5, "y":1}, {"label":"K113", "x":12.5, "y":1}, {"label":"K114", "x":13.5, "y":1, "w":1.5}, {"label":"K200", "x":0, "y":2, "w":1.75}, {"label":"K202", "x":1.75, "y":2}, {"label":"K203", "x":2.75, "y":2}, {"label":"K204", "x":3.75, "y":2}, {"label":"K205", "x":4.75, "y":2}, {"label":"K206", "x":5.75, "y":2}, {"label":"K207", "x":6.75, "y":2}, {"label":"K208", "x":7.75, "y":2}, {"label":"K209", "x":8.75, "y":2}, {"label":"K210", "x":9.75, "y":2}, {"label":"K211", "x":10.75, "y":2}, {"label":"K212", "x":11.75, "y":2}, {"label":"K213", "x":12.75, "y":2, "w":2.25}, {"label":"K300", "x":0, "y":3, "w":2}, {"label":"K301", "x":2, "y":3}, {"label":"K302", "x":3, "y":3}, {"label":"K303", "x":4, "y":3}, {"label":"K304", "x":5, "y":3}, {"label":"K305", "x":6, "y":3}, {"label":"K306", "x":7, "y":3}, {"label":"K307", "x":8, "y":3}, {"label":"K308", "x":9, "y":3}, {"label":"K309", "x":10, "y":3}, {"label":"K310", "x":11, "y":3}, {"label":"K312", "x":12, "y":3}, {"label":"K313", "x":13, "y":3}, {"label":"K314", "x":14, "y":3}, {"label":"K400", "x":0, "y":4, "w":1.25}, {"label":"K401", "x":1.25, "y":4, "w":1.25}, {"label":"K403", "x":2.5, "y":4, "w":1.25}, {"label":"K406", "x":3.75, "y":4, "w":6.25}, {"label":"K410", "x":10, "y":4}, {"label":"K411", "x":11, "y":4}, {"label":"K412", "x":12, "y":4}, {"label":"K413", "x":13, "y":4}, {"label":"K414", "x":14, "y":4}]

keyboards/dz60/rules.mk

@@ -55,4 +55,4 @@ BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes
 
-LAYOUTS = 60_ansi 60_iso
+LAYOUTS = 60_ansi 60_iso 60_hhkb

keyboards/h87a/info.json

@@ -5,7 +5,7 @@
     "width": 18.25, 
     "height": 6.5, 
     "layouts": {
-        "LAYOUT": {
+        "LAYOUT_all": {
             "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":3.5, "w":1.25}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
         }
     }

keyboards/helix/config.h

@@ -39,4 +39,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //     ./tmk_core
 //     ......
 
+#ifdef USE_Link_Time_Optimization
+  // LTO has issues with macros (action_get_macro) and "functions" (fn_actions),
+  //  so just disable them
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
+
+  #define DISABLE_LEADER
+#endif // USE_Link_Time_Optimization
+
 #endif /* CONFIG_H */

keyboards/helix/pico/keymaps/default/rules.mk

@@ -35,6 +35,7 @@ LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
 LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
 LED_ANIMATIONS = yes        # LED animations
 IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
+Link_Time_Optimization = no # if firmware size over limit, try this option
 
 ####  LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
 ####    Do not enable these with audio at the same time.
@@ -102,6 +103,19 @@ ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
     OPT_DEFS += -DLOCAL_GLCDFONT
 endif
 
+ifeq ($(strip $(AUDIO_ENABLE)),yes)
+  ifeq ($(strip $(RGBLIGHT_ENABLE)),yes)
+    Link_Time_Optimization = yes
+  endif
+  ifeq ($(strip $(OLED_ENABLE)),yes)
+    Link_Time_Optimization = yes
+  endif
+endif
+
+ifeq ($(strip $(Link_Time_Optimization)),yes)
+    EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
+endif
+
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/helix/rev2/keymaps/default/rules.mk

@@ -36,6 +36,7 @@ LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
 LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
 LED_ANIMATIONS = yes        # LED animations
 IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
+Link_Time_Optimization = no # if firmware size over limit, try this option
 
 ####  LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
 ####    Do not enable these with audio at the same time.
@@ -110,6 +111,10 @@ ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
     OPT_DEFS += -DLOCAL_GLCDFONT
 endif
 
+ifeq ($(strip $(Link_Time_Optimization)),yes)
+    EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
+endif
+
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/helix/rev2/keymaps/edvorakjp/rules.mk

@@ -35,6 +35,7 @@ LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
 LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
 LED_ANIMATIONS = yes        # LED animations
 IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
+Link_Time_Optimization = no # if firmware size over limit, try this option
 
 ####  LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
 ####    Do not enable these with audio at the same time.
@@ -113,6 +114,10 @@ ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
   OPT_DEFS += -DLOCAL_GLCDFONT
 endif
 
+ifeq ($(strip $(Link_Time_Optimization)),yes)
+    EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
+endif
+
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/helix/rev2/keymaps/five_rows/rules.mk

@@ -36,6 +36,7 @@ LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
 LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
 LED_ANIMATIONS = yes        # LED animations
 IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
+Link_Time_Optimization = no # if firmware size over limit, try this option
 
 ####  LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
 ####    Do not enable these with audio at the same time.
@@ -110,6 +111,10 @@ ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
     OPT_DEFS += -DLOCAL_GLCDFONT
 endif
 
+ifeq ($(strip $(Link_Time_Optimization)),yes)
+    EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
+endif
+
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/helix/rev2/keymaps/five_rows_jis/rules.mk

@@ -36,6 +36,7 @@ LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
 LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
 LED_ANIMATIONS = yes        # LED animations
 IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
+Link_Time_Optimization = no # if firmware size over limit, try this option
 
 ####  LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
 ####    Do not enable these with audio at the same time.
@@ -110,6 +111,10 @@ ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
     OPT_DEFS += -DLOCAL_GLCDFONT
 endif
 
+ifeq ($(strip $(Link_Time_Optimization)),yes)
+    EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
+endif
+
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/helix/rev2/keymaps/froggy/rules.mk

@@ -36,6 +36,7 @@ LED_BACK_ENABLE = yes        # LED backlight (Enable WS2812 RGB underlight.)
 LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
 LED_ANIMATIONS = yes        # LED animations
 IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
+Link_Time_Optimization = no # if firmware size over limit, try this option
 
 ####  LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
 ####    Do not enable these with audio at the same time.
@@ -110,6 +111,10 @@ ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
     OPT_DEFS += -DLOCAL_GLCDFONT
 endif
 
+ifeq ($(strip $(Link_Time_Optimization)),yes)
+    EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
+endif
+
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/helix/rev2/keymaps/led_test/rules.mk

@@ -36,6 +36,7 @@ LED_BACK_ENABLE = yes        # LED backlight (Enable WS2812 RGB underlight.)
 LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
 LED_ANIMATIONS = yes        # LED animations
 IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
+Link_Time_Optimization = no # if firmware size over limit, try this option
 
 ####  LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
 ####    Do not enable these with audio at the same time.
@@ -110,6 +111,10 @@ ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
     OPT_DEFS += -DLOCAL_GLCDFONT
 endif
 
+ifeq ($(strip $(Link_Time_Optimization)),yes)
+    EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
+endif
+
 SRC += led_test_init.c
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/iris/keymaps/default/config.h

@@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
+#pragma once
 
 /* Use I2C or Serial, not both */
 
@@ -37,5 +34,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
-
-#endif