Highlight .inc files as .c files (#8496)

* VIA Support: GH60 Rev C and GH60 Satan

* Corrected GH60 VIA default keymap

* Corrected GH60 VIA default keymap pt 2

* Copied default keymap over via default keymap

* Satan GH60 default corrected for VIA

* Satan GH60 default corrected for VIA pt 2

* Satan GH60 LTO enable for size

* Transparent 4th dynamic layer for GH60 Via support

* Update keyboards/gh60/revc/info.json

* Update keyboards/gh60/satan/info.json

* Update keyboards/gh60/satan/info.json

* Removed deprecated JSON keys gh60/revc/info.json

* Removed inline comment next to VID for GH60 Satan

.vscode/settings.json

@@ -11,6 +11,7 @@
     "files.associations": {
       "*.h": "c",
       "*.c": "c",
+      "*.inc": "c",
       "*.cpp": "cpp",
       "*.hpp": "cpp",
       "xstddef": "c",

docs/adc_driver.md

@@ -2,7 +2,7 @@
 
 QMK can leverage the Analog-to-Digital Converter (ADC) on supported MCUs to measure voltages on certain pins. This can be useful for implementing things such as battery level indicators for Bluetooth keyboards, or volume controls using a potentiometer, as opposed to a [rotary encoder](feature_encoders.md).
 
-This driver currently supports both AVR and a limited selection of ARM devices. On AVR devices, the values returned are 10-bit integers (0-1023) mapped between 0V and VCC (usually 5V or 3.3V). On supported ARM devices, there is more flexibility in control of operation through `#define`s, but by default the values returned are 12-bit integers (0-4095) mapped between 0V and VCC (usually 3.3V).
+This driver currently supports both AVR and a limited selection of ARM devices. The values returned are 10-bit integers (0-1023) mapped between 0V and VCC (usually 5V or 3.3V for AVR, 3.3V only for ARM), however on ARM there is more flexibility in control of operation through `#define`s if you need more precision.
 
 ## Usage
 

docs/cli.md

@@ -1,14 +1,14 @@
-# QMK CLI
+# QMK CLI :id=qmk-cli
 
-## Overview
+## Overview :id=overview
 
 The QMK CLI makes building and working with QMK keyboards easier. We have provided a number of commands to simplify and streamline tasks such as obtaining and compiling the QMK firmware, creating keymaps, and more.
 
-### Requirements
+### Requirements :id=requirements
 
 The CLI requires Python 3.5 or greater. We try to keep the number of requirements small but you will also need to install the packages listed in [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt). These are installed automatically when you install the QMK CLI.
 
-### Install Using Homebrew (macOS, some Linux)
+### Install Using Homebrew (macOS, some Linux) :id=install-using-homebrew
 
 If you have installed [Homebrew](https://brew.sh) you can tap and install QMK:
 
@@ -19,7 +19,7 @@ export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
 qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
 ```
 
-### Install Using easy_install or pip
+### Install Using easy_install or pip :id=install-using-easy_install-or-pip
 
 If your system is not listed above you can install QMK manually. First ensure that you have python 3.5 (or later) installed and have installed pip. Then install QMK with this command:
 
@@ -29,7 +29,7 @@ export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
 qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
 ```
 
-### Packaging For Other Operating Systems
+### Packaging For Other Operating Systems :id=packaging-for-other-operating-systems
 
 We are looking for people to create and maintain a `qmk` package for more operating systems. If you would like to create a package for your OS please follow these guidelines:
 

docs/cli_commands.md

@@ -57,6 +57,12 @@ Must be in keyboard directory with a default keymap, or in keymap directory for
 qmk compile
 ```
 
+**Usage for building all keyboards that support a specific keymap**:
+
+```
+qmk compile -kb all -km <keymap_name>
+```
+
 **Example**:
 ```
 $ qmk config compile.keymap=default

docs/feature_pointing_device.md

@@ -1,10 +1,10 @@
-## Pointing Device
+# Pointing Device :id=pointing-device
 
 Pointing Device is a generic name for a feature intended to be generic: moving the system pointer around.  There are certainly other options for it - like mousekeys - but this aims to be easily modifiable and lightweight.  You can implement custom keys to control functionality, or you can gather information from other peripherals and insert it directly here - let QMK handle the processing for you.
 
 To enable Pointing Device, uncomment the following line in your rules.mk:
 
-```
+```makefile
 POINTING_DEVICE_ENABLE = yes
 ```
 
@@ -25,7 +25,7 @@ When the mouse report is sent, the x, y, v, and h values are set to 0 (this is d
 
 In the following example, a custom key is used to click the mouse and scroll 127 units vertically and horizontally, then undo all of that when released - because that's a totally useful function.  Listen, this is an example:
 
-```
+```c
 case MS_SPECIAL:
 	report_mouse_t currentReport = pointing_device_get_report();
     if (record->event.pressed)

docs/feature_ps2_mouse.md

@@ -1,4 +1,4 @@
-## PS/2 Mouse Support
+# PS/2 Mouse Support :id=ps2-mouse-support
 
 Its possible to hook up a PS/2 mouse (for example touchpads or trackpoints) to your keyboard as a composite device.
 
@@ -6,7 +6,7 @@ To hook up a Trackpoint, you need to obtain a Trackpoint module (i.e. harvest fr
 
 There are three available modes for hooking up PS/2 devices: USART (best), interrupts (better) or busywait (not recommended).
 
-### The Cirtuitry between Trackpoint and Controller
+## The Circuitry between Trackpoint and Controller :id=the-circuitry-between-trackpoint-and-controller
 
 To get the things working, a 4.7K drag is needed between the two lines DATA and CLK and the line 5+. 
 
@@ -24,20 +24,20 @@ MODULE    5+  --------+--+--------- PWR   CONTROLLER
 ```
 
 
-### Busywait Version
+## Busywait Version :id=busywait-version
 
 Note: This is not recommended, you may encounter jerky movement or unsent inputs. Please use interrupt or USART version if possible.
 
 In rules.mk:
 
-```
+```makefile
 PS2_MOUSE_ENABLE = yes
 PS2_USE_BUSYWAIT = yes
 ```
 
 In your keyboard config.h:
 
-```
+```c
 #ifdef PS2_USE_BUSYWAIT
 #   define PS2_CLOCK_PORT  PORTD
 #   define PS2_CLOCK_PIN   PIND
@@ -50,20 +50,20 @@ In your keyboard config.h:
 #endif
 ```
 
-### Interrupt Version
+## Interrupt Version :id=interrupt-version
 
 The following example uses D2 for clock and D5 for data. You can use any INT or PCINT pin for clock, and any pin for data.
 
 In rules.mk:
 
-```
+```makefile
 PS2_MOUSE_ENABLE = yes
 PS2_USE_INT = yes
 ```
 
 In your keyboard config.h:
 
-```
+```c
 #ifdef PS2_USE_INT
 #define PS2_CLOCK_PORT  PORTD
 #define PS2_CLOCK_PIN   PIND
@@ -88,20 +88,20 @@ In your keyboard config.h:
 #endif
 ```
 
-### USART Version
+## USART Version :id=usart-version
 
 To use USART on the ATMega32u4, you have to use PD5 for clock and PD2 for data. If one of those are unavailable, you need to use interrupt version.
 
 In rules.mk:
 
-```
+```makefile
 PS2_MOUSE_ENABLE = yes
 PS2_USE_USART = yes
 ```
 
 In your keyboard config.h:
 
-```
+```c
 #ifdef PS2_USE_USART
 #define PS2_CLOCK_PORT  PORTD
 #define PS2_CLOCK_PIN   PIND
@@ -145,13 +145,13 @@ In your keyboard config.h:
 #endif
 ```
 
-### Additional Settings
+## Additional Settings :id=additional-settings
 
-#### PS/2 Mouse Features
+### PS/2 Mouse Features :id=ps2-mouse-features
 
 These enable settings supported by the PS/2 mouse protocol.
 
-```
+```c
 /* Use remote mode instead of the default stream mode (see link) */
 #define PS2_MOUSE_USE_REMOTE_MODE
 
@@ -170,7 +170,7 @@ These enable settings supported by the PS/2 mouse protocol.
 
 You can also call the following functions from ps2_mouse.h
 
-```
+```c
 void ps2_mouse_disable_data_reporting(void);
 
 void ps2_mouse_enable_data_reporting(void);
@@ -188,36 +188,36 @@ void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution);
 void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate);
 ```
 
-#### Fine Control
+### Fine Control :id=fine-control
 
 Use the following defines to change the sensitivity and speed of the mouse.
 Note: you can also use `ps2_mouse_set_resolution` for the same effect (not supported on most touchpads).
 
-```
+```c
 #define PS2_MOUSE_X_MULTIPLIER 3
 #define PS2_MOUSE_Y_MULTIPLIER 3
 #define PS2_MOUSE_V_MULTIPLIER 1
 ```
 
-#### Scroll Button
+### Scroll Button :id=scroll-button
 
 If you're using a trackpoint, you will likely want to be able to use it for scrolling.
 It's possible to enable a "scroll button/s" that when pressed will cause the mouse to scroll instead of moving.
 To enable the feature, you must set a scroll button mask as follows:
 
-```
+```c
 #define PS2_MOUSE_SCROLL_BTN_MASK (1<<PS2_MOUSE_BUTTON_MIDDLE) /* Default */
 ```
 
 To disable the scroll button feature:
 
-```
+```c
 #define PS2_MOUSE_SCROLL_BTN_MASK 0
 ```
 
 The available buttons are:
 
-```
+```c
 #define PS2_MOUSE_BTN_LEFT      0
 #define PS2_MOUSE_BTN_RIGHT     1
 #define PS2_MOUSE_BTN_MIDDLE    2
@@ -229,27 +229,28 @@ Once you've configured your scroll button mask, you must configure the scroll bu
 This is the interval before which if the scroll buttons were released they would be sent to the host.
 After this interval, they will cause the mouse to scroll and will not be sent.
 
-```
+```c
 #define PS2_MOUSE_SCROLL_BTN_SEND 300 /* Default */
 ```
 
 To disable sending the scroll buttons:
-```
+
+```c
 #define PS2_MOUSE_SCROLL_BTN_SEND 0
 ```
 
 Fine control over the scrolling is supported with the following defines:
 
-```
+```c
 #define PS2_MOUSE_SCROLL_DIVISOR_H 2
 #define PS2_MOUSE_SCROLL_DIVISOR_V 2
 ```
 
-#### Invert Mouse and Scroll Axes
+### Invert Mouse and Scroll Axes :id=invert-mouse-and-scroll-axes
 
 To invert the X and Y axes you can put:
 
-```
+```c
 #define PS2_MOUSE_INVERT_X
 #define PS2_MOUSE_INVERT_Y
 ```
@@ -258,18 +259,18 @@ into config.h.
 
 To reverse the scroll axes you can put:
 
-```
+```c
 #define PS2_MOUSE_INVERT_H
 #define PS2_MOUSE_INVERT_V
 ```
 
 into config.h.
 
-#### Debug Settings
+### Debug Settings :id=debug-settings
 
 To debug the mouse, add `debug_mouse = true` or enable via bootmagic.
 
-```
+```c
 /* To debug the mouse reports */
 #define PS2_MOUSE_DEBUG_HID
 #define PS2_MOUSE_DEBUG_RAW

docs/feature_rgb_matrix.md

@@ -1,22 +1,22 @@
-# RGB Matrix Lighting
+# RGB Matrix Lighting :id=rgb-matrix-lighting
 
 This feature allows you to use RGB LED matrices driven by external drivers. It hooks into the RGBLIGHT system so you can use the same keycodes as RGBLIGHT to control it.
 
 If you want to use single color LED's you should use the [LED Matrix Subsystem](feature_led_matrix.md) instead.
 
-## Driver configuration
+## Driver configuration :id=driver-configuration
 ---
-### IS31FL3731
+### IS31FL3731 :id=is31fl3731
 
 There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
 
-```C
+```makefile
 RGB_MATRIX_ENABLE = IS31FL3731
 ```
 
 Configure the hardware via your `config.h`:
 
-```C
+```c
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
 // The address will vary depending on your wiring:
@@ -39,7 +39,7 @@ Currently only 2 drivers are supported, but it would be trivial to support all 4
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
-```C
+```c
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 /* Refer to IS31 manual for these locations
  *   driver
@@ -55,19 +55,19 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
 
 ---
-###  IS31FL3733/IS31FL3737
+### IS31FL3733/IS31FL3737 :id=is31fl3733is31fl3737
 
 !> For the IS31FL3737, replace all instances of `IS31FL3733` below with `IS31FL3737`.
 
 There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`:
 
-```C
+```makefile
 RGB_MATRIX_ENABLE = IS31FL3733
 ```
 
 Configure the hardware via your `config.h`:
 
-```C
+```c
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
 // The address will vary depending on your wiring:
@@ -90,7 +90,7 @@ Currently only a single drivers is supported, but it would be trivial to support
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
-```C
+```c
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 /* Refer to IS31 manual for these locations
  *   driver
@@ -107,17 +107,17 @@ Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](
 
 ---
 
-### WS2812
+### WS2812 :id=ws2812
 
 There is basic support for addressable RGB matrix lighting with a WS2811/WS2812{a,b,c} addressable LED strand. To enable it, add this to your `rules.mk`:
 
-```C
+```makefile
 RGB_MATRIX_ENABLE = WS2812
 ```
 
 Configure the hardware via your `config.h`:
 
-```C
+```c
 // The pin connected to the data pin of the LEDs
 #define RGB_DI_PIN D7
 // The number of LEDs connected
@@ -128,7 +128,7 @@ Configure the hardware via your `config.h`:
 
 From this point forward the configuration is the same for all the drivers. The `led_config_t` struct provides a key electrical matrix to led index lookup table, what the physical position of each LED is on the board, and what type of key or usage the LED if the LED represents. Here is a brief example:
 
-```C
+```c
 const led_config_t g_led_config = { {
   // Key Matrix to LED Index
   {   5, NO_LED, NO_LED,   0 },
@@ -146,7 +146,7 @@ const led_config_t g_led_config = { {
 
 The first part, `// Key Matrix to LED Index`, tells the system what key this LED represents by using the key's electrical matrix row & col. The second part, `// LED Index to Physical Position` represents the LED's physical `{ x, y }` position on the keyboard. The default expected range of values for `{ x, y }` is the inclusive range `{ 0..224, 0..64 }`. This default expected range is due to effects that calculate the center of the keyboard for their animations. The easiest way to calculate these positions is imagine your keyboard is a grid, and the top left of the keyboard represents `{ x, y }` coordinate `{ 0, 0 }` and the bottom right of your keyboard represents `{ 224, 64 }`. Using this as a basis, you can use the following formula to calculate the physical position:
 
-```C
+```c
 x = 224 / (NUMBER_OF_COLS - 1) * COL_POSITION
 y =  64 / (NUMBER_OF_ROWS - 1) * ROW_POSITION
 ```
@@ -157,7 +157,7 @@ As mentioned earlier, the center of the keyboard by default is expected to be `{
 
 `// LED Index to Flag` is a bitmask, whether or not a certain LEDs is of a certain type. It is recommended that LEDs are set to only 1 type.
 
-## Flags
+## Flags :id=flags
 
 |Define                              |Description                                |
 |------------------------------------|-------------------------------------------|
@@ -169,7 +169,7 @@ As mentioned earlier, the center of the keyboard by default is expected to be `{
 |`#define LED_FLAG_UNDERGLOW 0x02`   |If the LED is for underglow.               |
 |`#define LED_FLAG_KEYLIGHT  0x04`   |If the LED is for key backlight.           |
 
-## Keycodes
+## Keycodes :id=keycodes
 
 All RGB keycodes are currently shared with the RGBLIGHT system:
 
@@ -189,11 +189,11 @@ All RGB keycodes are currently shared with the RGBLIGHT system:
 
 * `RGB_MODE_*` keycodes will generally work, but are not currently mapped to the correct effects for the RGB Matrix system
 
-## RGB Matrix Effects
+## RGB Matrix Effects :id=rgb-matrix-effects
 
 All effects have been configured to support current configuration values (Hue, Saturation, Value, & Speed) unless otherwise noted below. These are the effects that are currently available:
 
-```C
+```c
 enum rgb_matrix_effects {
     RGB_MATRIX_NONE = 0,
     RGB_MATRIX_SOLID_COLOR = 1,     // Static single hue, no speed support
@@ -285,7 +285,7 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con
 |`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH`         |Disables `RGB_MATRIX_SOLID_MULTISPLASH`        |
 
 
-## Custom RGB Matrix Effects
+## Custom RGB Matrix Effects :id=custom-rgb-matrix-effects
 
 By setting `RGB_MATRIX_CUSTOM_USER` (and/or `RGB_MATRIX_CUSTOM_KB`) in `rules.mk`, new effects can be defined directly from userspace, without having to edit any QMK core files.
 
@@ -294,7 +294,7 @@ To declare new effects, create a new `rgb_matrix_user/kb.inc` that looks somethi
 `rgb_matrix_user.inc` should go in the root of the keymap directory.
 `rgb_matrix_kb.inc` should go in the root of the keyboard directory.
 
-```C
+```c
 // !!! DO NOT ADD #pragma once !!! //
 
 // Step 1.
@@ -341,7 +341,7 @@ static bool my_cool_effect2(effect_params_t* params) {
 For inspiration and examples, check out the built-in effects under `quantum/rgb_matrix_animation/`
 
 
-## Colors
+## Colors :id=colors
 
 These are shorthands to popular colors. The `RGB` ones can be passed to the `setrgb` functions, while the `HSV` ones to the `sethsv` functions.
 
@@ -369,9 +369,9 @@ These are shorthands to popular colors. The `RGB` ones can be passed to the `set
 These are defined in [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h). Feel free to add to this list!
 
 
-## Additional `config.h` Options
+## Additional `config.h` Options :id=additional-configh-options
 
-```C
+```c
 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
@@ -386,21 +386,21 @@ These are defined in [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blo
 #define RGB_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set
 ```
 
-## EEPROM storage
+## EEPROM storage :id=eeprom-storage
 
 The EEPROM for it is currently shared with the RGBLIGHT system (it's generally assumed only one RGB would be used at a time), but could be configured to use its own 32bit address with:
 
-```C
+```c
 #define EECONFIG_RGB_MATRIX (uint32_t *)28
 ```
 
 Where `28` is an unused index from `eeconfig.h`.
 
-## Suspended state
+## Suspended state :id=suspended-state
 
 To use the suspend feature, add this to your `<keyboard>.c`:
 
-```C
+```c
 void suspend_power_down_kb(void)
 {
     rgb_matrix_set_suspend_state(true);

docs/feature_rgblight.md

@@ -228,6 +228,8 @@ bool led_update_user(led_t led_state) {
 }
 ```
 
+Note: For split keyboards with two controllers, both sides need to be flashed when updating the contents of rgblight_layers.
+
 ## Functions
 
 If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight.h) for the full list, but the most commonly used functions include:

docs/feature_stenography.md

@@ -1,16 +1,16 @@
-# Stenography in QMK
+# Stenography in QMK :id=stenography-in-qmk
 
 [Stenography](https://en.wikipedia.org/wiki/Stenotype) is a method of writing most often used by court reports, closed-captioning, and real-time transcription for the deaf. In stenography words are chorded syllable by syllable with a mixture of spelling, phonetic, and shortcut (briefs) strokes. Professional stenographers can reach 200-300 WPM without any of the strain usually found in standard typing and with far fewer errors (>99.9% accuracy).
 
 The [Open Steno Project](http://www.openstenoproject.org/) has built an open-source program called Plover that provides real-time translation of steno strokes into words and commands. It has an established dictionary and supports
 
-## Plover with QWERTY Keyboard
+## Plover with QWERTY Keyboard :id=plover-with-qwerty-keyboard
 
 Plover can work with any standard QWERTY keyboard, although it is more efficient if the keyboard supports NKRO (n-key rollover) to allow Plover to see all the pressed keys at once. An example keymap for Plover can be found in `planck/keymaps/default`. Switching to the `PLOVER` layer adjusts the position of the keyboard to support the number bar.
 
 To use Plover with QMK just enable NKRO and optionally adjust your layout if you have anything other than a standard layout. You may also want to purchase some steno-friendly keycaps to make it easier to hit multiple keys.
 
-## Plover with Steno Protocol
+## Plover with Steno Protocol :id=plover-with-steno-protocol
 
 Plover also understands the language of several steno machines. QMK can speak a couple of these languages, TX Bolt and GeminiPR. An example layout can be found in `planck/keymaps/steno`.
 
@@ -20,26 +20,26 @@ In this mode Plover expects to speak with a steno machine over a serial port so
 
 > Note: Due to hardware limitations you may not be able to run both a virtual serial port and mouse emulation at the same time.
 
-### TX Bolt
+### TX Bolt :id=tx-bolt
 
 TX Bolt communicates the status of 24 keys over a very simple protocol in variable-sized (1-5 byte) packets.
 
-### GeminiPR
+### GeminiPR :id=geminipr
 
 GeminiPR encodes 42 keys into a 6-byte packet. While TX Bolt contains everything that is necessary for standard stenography, GeminiPR opens up many more options, including supporting non-English theories.
 
-## Configuring QMK for Steno
+## Configuring QMK for Steno :id=configuring-qmk-for-steno
 
 Firstly, enable steno in your keymap's Makefile. You may also need disable mousekeys, extra keys, or another USB endpoint to prevent conflicts. The builtin USB stack for some processors only supports a certain number of USB endpoints and the virtual serial port needed for steno fills 3 of them.
 
-```Makefile
+```makefile
 STENO_ENABLE = yes
 MOUSEKEY_ENABLE = no
 ```
 
 In your keymap create a new layer for Plover. You will need to include `keymap_steno.h`. See `planck/keymaps/steno/keymap.c` for an example. Remember to create a key to switch to the layer as well as a key for exiting the layer. If you would like to switch modes on the fly you can use the keycodes `QK_STENO_BOLT` and `QK_STENO_GEMINI`. If you only want to use one of the protocols you may set it up in your initialization function:
 
-```C
+```c
 void matrix_init_user() {
   steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT
 }
@@ -49,37 +49,37 @@ Once you have your keyboard flashed launch Plover. Click the 'Configure...' butt
 
 On the display tab click 'Open stroke display'. With Plover disabled you should be able to hit keys on your keyboard and see them show up in the stroke display window. Use this to make sure you have set up your keymap correctly. You are now ready to steno!
 
-## Learning Stenography
+## Learning Stenography :id=learning-stenography
 
 * [Learn Plover!](https://sites.google.com/site/learnplover/)
 * [QWERTY Steno](http://qwertysteno.com/Home/)
 * [Steno Jig](https://joshuagrams.github.io/steno-jig/)
 * More resources at the Plover [Learning Stenography](https://github.com/openstenoproject/plover/wiki/Learning-Stenography) wiki
 
-## Interfacing with the code
+## Interfacing with the code :id=interfacing-with-the-code
 
 The steno code has three interceptible hooks. If you define these functions, they will be called at certain points in processing; if they return true, processing continues, otherwise it's assumed you handled things.
 
-```C
+```c
 bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]);
 ```
 
 This function is called when a chord is about to be sent. Mode will be one of `STENO_MODE_BOLT` or `STENO_MODE_GEMINI`. This represents the actual chord that would be sent via whichever protocol. You can modify the chord provided to alter what gets sent. Remember to return true if you want the regular sending process to happen.
 
-```C
+```c
 bool process_steno_user(uint16_t keycode, keyrecord_t *record) { return true; }
 ```
 
 This function is called when a keypress has come in, before it is processed. The keycode should be one of `QK_STENO_BOLT`, `QK_STENO_GEMINI`, or one of the `STN_*` key values.
 
-```C
+```c
 bool postprocess_steno_user(uint16_t keycode, keyrecord_t *record, steno_mode_t mode, uint8_t chord[6], int8_t pressed);
 ```
 
 This function is called after a key has been processed, but before any decision about whether or not to send a chord. If `IS_PRESSED(record->event)` is false, and `pressed` is 0 or 1, the chord will be sent shortly, but has not yet been sent. This is where to put hooks for things like, say, live displays of steno chords or keys.
 
 
-## Keycode Reference
+## Keycode Reference :id=keycode-reference
 
 As defined in `keymap_steno.h`.
 

docs/feature_userspace.md

@@ -97,13 +97,25 @@ You'd want to replace the year, name, email and github username with your info.
 
 Additionally, this is a good place to document your code, if you wish to share it with others. 
 
-# Examples
+## Build All Keyboards That Support a Specific Keymap
+
+Want to check all your keymaps build in a single command? You can run:
+
+    make all:<name>
+
+For example,
+
+    make all:jack
+
+This is ideal for when you want ensure everything compiles successfully when preparing a [_Pull request_](https://github.com/qmk/qmk_firmware/pulls).
+
+## Examples
 
 For a brief example, checkout [`/users/_example/`](https://github.com/qmk/qmk_firmware/tree/master/users/drashna).  
 For a more complicated example, checkout [`/users/drashna/`](https://github.com/qmk/qmk_firmware/tree/master/users/drashna)'s userspace.
 
 
-## Customized Functions
+### Customized Functions
 
 QMK has a bunch of [functions](custom_quantum_functions.md) that have [`_quantum`, `_kb`, and `_user` versions](custom_quantum_functions.md#a-word-on-core-vs-keyboards-vs-keymap) that you can use.  You will pretty much always want to use the user version of these functions.  But the problem is that if you use them in your userspace, then you don't have a version that you can use in your keymap. 
 
@@ -130,7 +142,7 @@ The `_keymap` part here doesn't matter, it just needs to be something other than
 
 You can see a list of this and other common functions in [`template.c`](https://github.com/qmk/qmk_firmware/blob/master/users/drashna/template.c) in [`users/drashna`](https://github.com/qmk/qmk_firmware/tree/master/users/drashna).
 
-## Custom Features
+### Custom Features
 
 Since the Userspace feature can support a staggering number of boards, you may have boards that you want to enable certain functionality for, but not for others. And you can actually create "features" that you can enable or disable in your own userspace.  
 
@@ -166,7 +178,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 ```
 
 
-## Consolidated Macros
+### Consolidated Macros
 
 If you wanted to consolidate macros and other functions into your userspace for all of your keymaps, you can do that.  This builds upon the [Customized Functions](#customized-functions) example above. This lets you maintain a bunch of macros that are shared between the different keyboards, and allow for keyboard specific macros, too. 
 

docs/i2c_driver.md

@@ -1,8 +1,8 @@
-# I2C Master Driver
+# I2C Master Driver :id=i2c-master-driver
 
 The I2C Master drivers used in QMK have a set of common functions to allow portability between MCUs.
 
-## An important note on I2C Addresses
+## An important note on I2C Addresses :id=note-on-i2c-addresses
 
 All of the addresses expected by this driver should be pushed to the upper 7 bits of the address byte.  Setting
 the lower bit (indicating read/write) will be done by the respective functions.  Almost all I2C addresses listed 
@@ -15,7 +15,7 @@ You can either do this on each call to the functions below, or once in your defi
 
 See https://www.robot-electronics.co.uk/i2c-tutorial for more information about I2C addressing and other technical details.
 
-## Available functions
+## Available functions :id=available-functions
 
 |Function                                                                                                          |Description                                                                                                                                                                  |
 |------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
@@ -27,7 +27,7 @@ See https://www.robot-electronics.co.uk/i2c-tutorial for more information about
 |`i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`        |Same as the `i2c_receive` function but `regaddr` sets from where in the slave the data will be read.                                                                         |
 |`i2c_status_t i2c_stop(void);`                                                                                         |Ends an I2C transaction.                                                                                                                                                     |
 
-### Function Return
+### Function Return :id=function-return
 
 All the above functions, except `void i2c_init(void);` return the following truth table:
 
@@ -38,9 +38,9 @@ All the above functions, except `void i2c_init(void);` return the following trut
 |`I2C_STATUS_TIMEOUT`|-2   |Operation timed out.            |
 
 
-## AVR
+## AVR :id=avr
 
-### Configuration
+### Configuration :id=avr-configuration
 
 The following defines can be used to configure the I2C master driver.
 
@@ -50,12 +50,12 @@ The following defines can be used to configure the I2C master driver.
 
 AVRs usually have set GPIO which turn into I2C pins, therefore no further configuration is required.
 
-## ARM
+## ARM :id=arm
 
 For ARM the Chibios I2C HAL driver is under the hood.
 This section assumes an STM32 MCU.
 
-### Configuration
+### Configuration :id=arm-configuration
 
 The configuration for ARM MCUs can be quite complex as often there are multiple I2C drivers which can be assigned to a variety of ports.
 
@@ -90,7 +90,7 @@ The ChibiOS I2C driver configuration depends on STM32 MCU:
     STM32F1xx, STM32F2xx, STM32F4xx, STM32L0xx and STM32L1xx use I2Cv1;
     STM32F0xx, STM32F3xx, STM32F7xx and STM32L4xx use I2Cv2;
 
-#### I2Cv1
+#### I2Cv1 :id=i2cv1
 STM32 MCUs allow for different clock and duty parameters when configuring I2Cv1. These can be modified using the following parameters, using <https://www.playembedded.org/blog/stm32-i2c-chibios/#I2Cv1_configuration_structure> as a reference:
 
 | Variable           | Default          |
@@ -99,7 +99,7 @@ STM32 MCUs allow for different clock and duty parameters when configuring I2Cv1.
 | `I2C1_CLOCK_SPEED` | `100000`         |
 | `I2C1_DUTY_CYCLE`  | `STD_DUTY_CYCLE` |
 
-#### I2Cv2
+#### I2Cv2 :id=i2cv2
 STM32 MCUs allow for different timing parameters when configuring I2Cv2. These can be modified using the following parameters, using <https://www.st.com/en/embedded-software/stsw-stm32126.html> as a reference:
 
 | Variable              | Default |
@@ -117,10 +117,10 @@ STM32 MCUs allow for different "alternate function" modes when configuring GPIO
 | `I2C1_SCL_PAL_MODE` | `4`     |
 | `I2C1_SDA_PAL_MODE` | `4`     |
 
-#### Other
+#### Other :id=other
 You can also overload the `void i2c_init(void)` function, which has a weak attribute. If you do this the configuration variables above will not be used. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function:
 
-```C
+```c
 void i2c_init(void)
 {
   setPinInput(B6); // Try releasing special pins for a short time

docs/internals_gpio_control.md

@@ -1,22 +1,22 @@
-# GPIO Control
+# GPIO Control :id=gpio-control
 
 QMK has a GPIO control abstraction layer which is microcontroller agnostic. This is done to allow easy access to pin control across different platforms.
 
-## Functions
+## Functions :id=functions
 
 The following functions can provide basic control of GPIOs and are found in `quantum/quantum.h`.
 
-|Function              |Description                                                       | Old AVR Examples                               | Old ChibiOS/ARM Examples                        |
-|----------------------|------------------------------------------------------------------|------------------------------------------------|-------------------------------------------------|
-|`setPinInput(pin)`    |Set pin as input with high impedance (High-Z)                     | `DDRB &= ~(1<<2)`                              | `palSetLineMode(pin, PAL_MODE_INPUT)`           |
-|`setPinInputHigh(pin)`|Set pin as input with builtin pull-up resistor                    | `DDRB &= ~(1<<2); PORTB \|= (1<<2)`             | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)`    |
-|`setPinInputLow(pin)` |Set pin as input with builtin pull-down resistor                  | N/A (Not supported on AVR)                     | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)`  |
-|`setPinOutput(pin)`   |Set pin as output                                                 | `DDRB \|= (1<<2)`                               | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
-|`writePinHigh(pin)`   |Set pin level as high, assuming it is an output                   | `PORTB \|= (1<<2)`                              | `palSetLine(pin)`                               |
-|`writePinLow(pin)`    |Set pin level as low, assuming it is an output                    | `PORTB &= ~(1<<2)`                             | `palClearLine(pin)`                             |
-|`writePin(pin, level)`|Set pin level, assuming it is an output                           | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` |
-|`readPin(pin)`        |Returns the level of the pin                                      | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)`          | `palReadLine(pin)`                              |
+|Function                |Description                                       | Old AVR Examples                                | Old ChibiOS/ARM Examples                        |
+|------------------------|--------------------------------------------------|-------------------------------------------------|-------------------------------------------------|
+| `setPinInput(pin)`     | Set pin as input with high impedance (High-Z)    | `DDRB &= ~(1<<2)`                               | `palSetLineMode(pin, PAL_MODE_INPUT)`           |
+| `setPinInputHigh(pin)` | Set pin as input with builtin pull-up resistor   | `DDRB &= ~(1<<2); PORTB \|= (1<<2)`             | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)`    |
+| `setPinInputLow(pin)`  | Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR)                      | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)`  |
+| `setPinOutput(pin)`    | Set pin as output                                | `DDRB \|= (1<<2)`                               | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
+| `writePinHigh(pin)`    | Set pin level as high, assuming it is an output  | `PORTB \|= (1<<2)`                              | `palSetLine(pin)`                               |
+| `writePinLow(pin)`     | Set pin level as low, assuming it is an output   | `PORTB &= ~(1<<2)`                              | `palClearLine(pin)`                             |
+| `writePin(pin, level)` | Set pin level, assuming it is an output          | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` |
+| `readPin(pin)`         | Returns the level of the pin                     | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)`           | `palReadLine(pin)`                              |
 
-## Advanced Settings
+## Advanced Settings :id=advanced-settings
 
 Each microcontroller can have multiple advanced settings regarding its GPIO. This abstraction layer does not limit the use of architecture-specific functions. Advanced users should consult the datasheet of their desired device and include any needed libraries. For AVR, the standard avr/io.h library is used; for STM32, the ChibiOS [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.

docs/ja/_summary.md

@@ -78,7 +78,7 @@
    * [キーロック](ja/feature_key_lock.md)
    * [レイアウト](ja/feature_layouts.md)
    * [リーダー キー](ja/feature_leader_key.md)
-   * [LED マトリクス](ja/feature_led_matrix.md)
+   * [LED マトリックス](ja/feature_led_matrix.md)
    * [マクロ](ja/feature_macros.md)
    * [マウスキー](ja/feature_mouse_keys.md)
    * [OLED ドライバ](ja/feature_oled_driver.md)
@@ -86,7 +86,7 @@
    * [ポインティング デバイス](ja/feature_pointing_device.md)
    * [PS/2 マウス](ja/feature_ps2_mouse.md)
    * [RGB ライト](ja/feature_rgblight.md)
-   * [RGB マトリクス](ja/feature_rgb_matrix.md)
+   * [RGB マトリックス](ja/feature_rgb_matrix.md)
    * [Space Cadet](ja/feature_space_cadet.md)
    * [分割キーボード](ja/feature_split_keyboard.md)
    * [Stenography](ja/feature_stenography.md)

docs/ja/custom_matrix.md

@@ -0,0 +1,114 @@
+# カスタムマトリックス
+
+<!---
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
+  original document: 0.8.46:docs/custom_matrix.md
+  git diff 0.8.46 HEAD -- docs/custom_matrix.md | cat
+-->
+
+QMKは、デフォルトのマトリックススキャンルーチンを独自のコードで部分的に入れ替えたり全部入れ替えたりしたりするメカニズムを提供します。
+
+この機能を使用する理由は次のとおりです:
+
+* キーボードのスイッチと MCU ピンの間に追加のハードウェアがある場合
+  * I/O マルチプレクサ
+  * ラインデコーダー
+* 一般的ではないキースイッチマトリックス
+  * `COL2ROW` と `ROW2COL` の同時使用
+
+## 前提条件
+
+カスタムマトリックスの実装には、通常、追加のソースファイルのコンパイルが含まれます。
+一貫性を保つために、このソースファイルのファイル名は `matrix.c` とすることをお勧めします。
+
+あなたのキーボードディレクトリに新しいファイルを追加します:
+```text
+keyboards/<keyboard>/matrix.c
+```
+
+そして、新しいファイルのコンパイルを指定するため、以下を `rules.mk` に追加します
+```make
+SRC += matrix.c
+```
+
+## マトリックスコードの部分置き換え
+
+カスタムマトリックスを実装する際、定型コードを書かなくてすむように、さまざまなスキャン関数のデフォルト実装を提供しています。
+
+設定するには、以下を `rules.mk` に追加します：
+```make
+CUSTOM_MATRIX = lite
+```
+
+そして、キーボードディレクトリの `matrix.c` ファイルに次の関数を実装します。
+
+```c
+void matrix_init_custom(void) {
+    // TODO: ここでハードウェアの初期化をする
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    bool matrix_has_changed = false;
+
+    // TODO: ここで、マトリックススキャンを行なう
+
+    return matrix_has_changed;
+}
+```
+
+## マトリックスコードの全面置き換え
+
+スキャンルーチンをさらに変更する必要がある場合は、完全なスキャンルーチンを実装することを選択できます。
+
+設定するには、以下を `rules.mk` に追加します：
+```make
+CUSTOM_MATRIX = yes
+```
+
+そして、キーボードディレクトリの `matrix.c` ファイルに次の関数を実装します。
+
+```c
+matrix_row_t matrix_get_row(uint8_t row) {
+    // TODO: 要求された行データを返します
+}
+
+void matrix_print(void) {
+    // TODO: printf() を使って現在のマトリックスの状態をコンソールにダンプします
+}
+
+void matrix_init(void) {
+    // TODO: ここでハードウェアとグローバルマトリックスの状態を初期化します
+
+    // ハードウェアによるデバウンスがない場合 - 設定されているデバウンスルーチンを初期化します
+    debounce_init(MATRIX_ROWS);
+
+    // 正しいキーボード動作のためにこれを呼び出す*必要があります*
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+    bool matrix_has_changed = false;
+
+    // TODO: ここにマトリックススキャンルーチンを追加します
+
+    // ハードウェアによるデバウンスがない場合 - 設定されているデバウンスルーチンを使用します
+    debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
+
+    // 正しいキーボード動作のためにこれを呼び出す*必要があります*
+    matrix_scan_quantum();
+
+    return matrix_has_changed;
+}
+```
+
+また、次のコールバックのデフォルトも提供します。
+
+```c
+__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
+
+__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
+
+__attribute__((weak)) void matrix_init_user(void) {}
+
+__attribute__((weak)) void matrix_scan_user(void) {}
+```

drivers/arm/analog.h

@@ -16,42 +16,26 @@
 
 #pragma once
 
+#include <stdint.h>
 #include "quantum.h"
-#include "ch.h"
-#include <hal.h>
 
-#if !defined(STM32F0XX) && !defined(STM32F3XX)
-#    error "Only STM23F0 and STM32F3 devices have ADC support in QMK at this time."
-#endif
-
-#if !HAL_USE_ADC
-#    error "You need to set HAL_USE_ADC to TRUE in your halconf.h to use the ADC."
-#endif
-
-#if !STM32_ADC_USE_ADC1 && !STM32_ADC_USE_ADC2 && !STM32_ADC_USE_ADC3 && !STM32_ADC_USE_ADC4
-#    error "You need to set one of the 'STM32_ADC_USE_ADCx' settings to TRUE in your mcuconf.h to use the ADC."
-#endif
-
-#if STM32_ADC_DUAL_MODE
-#    error "STM32 ADC Dual Mode is not supported at this time."
-#endif
-
-#if STM32_ADCV3_OVERSAMPLING
-#    error "STM32 ADCV3 Oversampling is not supported at this time."
+#ifdef __cplusplus
+extern "C" {
 #endif
 
 typedef struct {
-    pin_t   pin;
-    uint8_t adc;
-} pin_and_adc;
-#define PIN_AND_ADC(p, a) \
-    (pin_and_adc) { p, a }
+    uint16_t input;
+    uint8_t  adc;
+} adc_mux;
+#define TO_MUX(i, a) \
+    (adc_mux) { i, a }
 
-// analogReference has been left un-defined for ARM devices.
-// void analogReference(uint8_t mode);
+int16_t analogReadPin(pin_t pin);
+int16_t analogReadPinAdc(pin_t pin, uint8_t adc);
+adc_mux pinToMux(pin_t pin);
 
-adcsample_t analogReadPin(pin_t pin);
-adcsample_t analogReadPinAdc(pin_t pin, uint8_t adc);
-pin_and_adc pinToMux(pin_t pin);
+int16_t adc_read(adc_mux mux);
 
-adcsample_t adc_read(pin_and_adc mux);
+#ifdef __cplusplus
+}
+#endif

keyboards/ai03/polaris/info.json

@@ -1,9 +1,9 @@
 {
-    "keyboard_name": "Polaris", 
-    "url": "https://kb.ai03.me/projects/polaris.html", 
-    "maintainer": "ai03", 
-    "width": 15, 
-    "height": 5, 
+    "keyboard_name": "Polaris",
+    "url": "https://kb.ai03.me/projects/polaris.html",
+    "maintainer": "ai03",
+    "width": 15,
+    "height": 5,
     "layouts": {
         "LAYOUT_all": {
             "layout": [
@@ -75,6 +75,138 @@
                 {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
             ]
         },
+        "LAYOUT_60_ansi": {
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0, "w":2},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":2.75},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_ansi_split_bs_rshift": {
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Delete", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"Print Screen", "x":14, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
+        },
         "LAYOUT_60_tsangan_hhkb": {
             "layout": [
                 {"label":"~", "x":0, "y":0},

keyboards/ai03/polaris/polaris.h

@@ -40,6 +40,36 @@
 	{ K400,  K401,  K402,  KC_NO, K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413 }  \
 }
 
+#define LAYOUT_60_ansi( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K013, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K213, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,             K312, \
+	K400, K401, K402,                   K406,                         K410, K411, K412, K413  \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, K213 }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO}, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413 }  \
+}
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K213, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K312, K313, \
+	K400, K401, K402,                   K406,                         K410, K411, K412, K413  \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213 }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313 }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413 }  \
+}
+
 #define LAYOUT_60_tsangan_hhkb( \
 	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113, \

keyboards/ai03/polaris/rules.mk

@@ -31,4 +31,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
-LAYOUTS = 60_tsangan_hhkb
+LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_tsangan_hhkb

keyboards/choco60/keymaps/default/keymap.c

@@ -25,17 +25,17 @@ enum layer_names {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_BASE] = LAYOUT(
-    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQUAL, KC_BSLASH, KC_GRAVE,
-    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRACKET, KC_RBRACKET, KC_BSPACE,
-    KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOTE, KC_ENTER,
-    KC_LSHIFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSHIFT, KC_FN,
-    KC_LALT,  KC_LGUI, KC_SPACE, KC_SPACE, KC_SPACE, KC_RGUI, KC_RALT
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,     KC_7,    KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,     KC_U,    KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,     KC_J,    KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,     KC_M,    KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_FN,
+    KC_LALT, KC_LGUI, KC_SPC,  KC_SPC,  KC_SPC,  KC_RGUI, KC_RALT
   ),
   [_FN] = LAYOUT(
-    _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INSERT, KC_DELETE,
-    _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCREEN, KC_SCROLLLOCK, KC_PAUSE, KC_UP, KC_RBRACKET, KC_BSPACE,
-    _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_LEFT, KC_RIGHT, KC_ENTER,
-    RESET, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDOWN, KC_DOWN, KC_RSHIFT, KC_FN,
-    _______, _______, _______, _______, _______, KC_STOP, _______
+    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+    KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_END,  KC_PGDN, KC_DOWN, _______, _______,
+    _______, _______, _______, _______, _______, KC_STOP, RESET
   )
 };

keyboards/converter/sun_usb/type5/keymaps/sigma/rules.mk

@@ -1 +1,2 @@
 BOOTLOADER = halfkay
+UNICODE_ENABLE = yes

keyboards/coseyfannitutti/romeo/config.h

@@ -0,0 +1,250 @@
+/*
+Copyright 2019 coseyfannitutti
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x4069
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    coseyfannitutti
+#define PRODUCT         ROMEO
+#define DESCRIPTION     staggered layout 40% keyboard assembled with only through hole components
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+
+/* A Custom matrix.c is used to poll the port expander C6 shows that the pins are hardwired there */
+/*                        0   1   2   3   4   5   6   7   8   9  10  11*/
+#define MATRIX_ROW_PINS { B1, B4, B3, B2 }
+#define MATRIX_COL_PINS { C5, C4, C3, D0, C2, D1, C1, C0, D4, B0, D7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define NO_UART 1
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+*/

keyboards/coseyfannitutti/romeo/info.json

@@ -0,0 +1,21 @@
+{
+    "keyboard_name": "ROMEO", 
+    "url": "https://github.com/coseyfannitutti/romeo", 
+    "maintainer": "coseyfannitutti", 
+    "width": 13, 
+    "height": 4, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"1.5u", "x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"label":"1.5u", "x":11.5, "y":0, "w":1.5}, {"label":"1.75u", "x":0, "y":1, "w":1.75}, {"x":1.75, "y":1}, {"x":2.75, "y":1}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"label":"2.25u", "x":10.75, "y":1, "w":2.25}, {"label":"1.25u", "x":0, "y":2, "w":1.25}, {"x":1.25, "y":2}, {"x":2.25, "y":2}, {"x":3.25, "y":2}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"label":"1.75u", "x":11.25, "y":2, "w":1.75}, {"label":"1.25u", "x":0, "y":3, "w":1.25}, {"label":"1u", "x":1.25, "y":3}, {"label":"1.25u", "x":2.25, "y":3, "w":1.25}, {"label":"2.25u", "x":3.5, "y":3, "w":2.25}, {"label":"1u", "x":5.75, "y":3}, {"label":"2.75u", "x":6.75, "y":3, "w":2.75}, {"label":"1.25u", "x":9.5, "y":3, "w":1.25}, {"label":"1u", "x":10.75, "y":3}, {"label":"1.25u", "x":11.75, "y":3, "w":1.25}]
+        },
+        "LAYOUT_ansi_split_lshift": {
+            "layout": [{"label":"1.5u", "x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"label":"1.5u", "x":11.5, "y":0, "w":1.5}, {"label":"1.75u", "x":0, "y":1, "w":1.75}, {"x":1.75, "y":1}, {"x":2.75, "y":1}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"label":"2.25u", "x":10.75, "y":1, "w":2.25}, {"label":"1.25u", "x":0, "y":2, "w":1.25}, {"x":1.25, "y":2}, {"x":2.25, "y":2}, {"x":3.25, "y":2}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"label":"1.75u", "x":11.25, "y":2, "w":1.75}, {"label":"1.25u", "x":0, "y":3, "w":1.25}, {"label":"1u", "x":1.25, "y":3}, {"label":"1u", "x":2.25, "y":3}, {"label":"6.25u", "x":3.25, "y":3, "w":6.25}, {"label":"1.25u", "x":9.5, "y":3, "w":1.25}, {"label":"1u", "x":10.75, "y":3}, {"label":"1.25u", "x":11.75, "y":3, "w":1.25}]
+        },
+        "LAYOUT_ansi_split_space": {
+            "layout": [{"label":"1.5u", "x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"label":"1.5u", "x":11.5, "y":0, "w":1.5}, {"label":"1.75u", "x":0, "y":1, "w":1.75}, {"x":1.75, "y":1}, {"x":2.75, "y":1}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"label":"2.25u", "x":10.75, "y":1, "w":2.25}, {"label":"2.25u", "x":0, "y":2, "w":2.25}, {"x":2.25, "y":2}, {"x":3.25, "y":2}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"label":"1.75u", "x":11.25, "y":2, "w":1.75}, {"label":"1.25u", "x":0, "y":3, "w":1.25}, {"label":"1u", "x":1.25, "y":3}, {"label":"1.25u", "x":2.25, "y":3, "w":1.25}, {"label":"2.25u", "x":3.5, "y":3, "w":2.25}, {"label":"1u", "x":5.75, "y":3}, {"label":"2.75u", "x":6.75, "y":3, "w":2.75}, {"label":"1.25u", "x":9.5, "y":3, "w":1.25}, {"label":"1u", "x":10.75, "y":3}, {"label":"1.25u", "x":11.75, "y":3, "w":1.25}]
+        },
+        "LAYOUT_ansi_40": {
+            "layout": [{"label":"1.5u", "x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"label":"1.5u", "x":11.5, "y":0, "w":1.5}, {"label":"1.75u", "x":0, "y":1, "w":1.75}, {"x":1.75, "y":1}, {"x":2.75, "y":1}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"label":"2.25u", "x":10.75, "y":1, "w":2.25}, {"label":"2.25u", "x":0, "y":2, "w":2.25}, {"x":2.25, "y":2}, {"x":3.25, "y":2}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"label":"1.75u", "x":11.25, "y":2, "w":1.75}, {"label":"1.25u", "x":0, "y":3, "w":1.25}, {"label":"1u", "x":1.25, "y":3}, {"label":"1u", "x":2.25, "y":3}, {"label":"6.25u", "x":3.25, "y":3, "w":6.25}, {"label":"1.25u", "x":9.5, "y":3, "w":1.25}, {"label":"1u", "x":10.75, "y":3}, {"label":"1.25u", "x":11.75, "y":3, "w":1.25}]        
+        }
+    }
+}

keyboards/coseyfannitutti/romeo/keymaps/default/keymap.c

@@ -0,0 +1,31 @@
+/* Copyright 2019 COSEYFANNITUTTI
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_all(
+      KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, 
+      KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT,
+      KC_LSFT, KC_SLSH, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT,
+      KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL ),
+
+  [1] = LAYOUT_all(
+  	  KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, RESET,
+  	  KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_ENT,
+  	  KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_SLSH, KC_TRNS,
+  	  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS )
+};

keyboards/coseyfannitutti/romeo/readme.md

@@ -0,0 +1,13 @@
+# ROMEO
+
+A staggered 40% that can be assembled with only through hole components, including usb type-c, and can also be completely covered with most GMK base kits
+
+* Keyboard Maintainer: [coseyfannitutti](https://github.com/coseyfannitutti)
+* Hardware Supported: ROMEO, ATmega328P
+* Hardware Availability: [cftkb.com](http://www.cftkb.com), [GitHub](https://github.com/coseyfannitutti/romeo)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make coseyfannitutti/romeo:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/coseyfannitutti/romeo/romeo.c

@@ -0,0 +1,16 @@
+/* Copyright 2019 coseyfannitutti
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "romeo.h"

keyboards/coseyfannitutti/romeo/romeo.h

@@ -0,0 +1,76 @@
+/* Copyright 2019 coseyfannitutti
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define _x_ KC_NO
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,      K1B, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+  K30, K31, K32,      K34,      K36, K37,      K39, K3A, K3B  \
+) { \
+{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, }, \
+{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, _x_, K1B, }, \
+{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, }, \
+{ K30, K31, K32, _x_, K34, _x_, K36, K37, _x_, K39, K3A, K3B, }  \
+}
+
+#define LAYOUT_ansi_40( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,      K1B, \
+  K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+  K30, K31, K32,                K36,           K39, K3A, K3B  \
+) { \
+{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, }, \
+{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, _x_, K1B, }, \
+{ K20, _x_, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, }, \
+{ K30, K31, K32, _x_, _x_, _x_, K36, _x_, _x_, K39, K3A, K3B, }  \
+}
+
+#define LAYOUT_ansi_split_lshift( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,      K1B, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+  K30, K31, K32,                K36,           K39, K3A, K3B  \
+) { \
+{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, }, \
+{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, _x_, K1B, }, \
+{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, }, \
+{ K30, K31, K32, _x_, _x_, _x_, K36, _x_, _x_, K39, K3A, K3B, }  \
+}
+
+#define LAYOUT_ansi_split_space( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,      K1B, \
+  K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+  K30, K31, K32,                K36,           K39, K3A, K3B  \
+) { \
+{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, }, \
+{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, _x_, K1B, }, \
+{ K20, _x_, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, }, \
+{ K30, K31, K32, _x_, K34, _x_, K36, K37, _x_, K39, K3A, K3B, }  \
+}

keyboards/coseyfannitutti/romeo/rules.mk

@@ -0,0 +1,37 @@
+# MCU name
+MCU = atmega328p
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = USBasp
+
+# disable debug code
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

keyboards/ergodash/rev1/keymaps/tw1t611/config.h

@@ -0,0 +1,33 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS