remove some outdated changes

* Migrate some tmk_core files to quantum

* Fix build errors

.github/PULL_REQUEST_TEMPLATE.md

@@ -26,7 +26,8 @@
 
 <!--- Go over all the following points, and put an `x` in all the boxes that apply. -->
 <!--- If you're unsure about any of these, don't hesitate to ask. We're here to help! -->
-- [ ] My code follows the code style of this project.
+- [ ] My code follows the code style of this project: [**C**](https://docs.qmk.fm/#/coding_conventions_c), [**Python**](https://docs.qmk.fm/#/coding_conventions_python)
+- [ ] I have read the [**PR Checklist** document](https://docs.qmk.fm/#/pr_checklist) and have made the appropriate changes.
 - [ ] My change requires a change to the documentation.
 - [ ] I have updated the documentation accordingly.
 - [ ] I have read the [**CONTRIBUTING** document](https://docs.qmk.fm/#/contributing).

.github/labeler.yml

@@ -0,0 +1,42 @@
+core:
+  - quantum/**/*
+  - tmk_core/**/*
+  - drivers/**/*
+  - tests/**/*
+  - util/**/*
+  - platforms/**/*
+  - Makefile
+  - '*.mk'
+dependencies:
+  - any:
+    - 'lib/**/*'
+    - '!lib/python/**/*'
+keyboard:
+  - any:
+    - 'keyboards/**/*'
+    - '!keyboards/**/keymaps/**/*'
+keymap:
+  - users/**/*
+  - layouts/**/*
+  - keyboards/**/keymaps/**/*
+via:
+  - keyboards/**/keymaps/via/*
+cli:
+  - bin/qmk
+  - requirements.txt
+  - lib/python/**/*
+python:
+  - '**/*.py'
+documentation:
+  - docs/**/*
+translation:
+  - docs/fr-fr/**/*
+  - docs/es/**/*
+  - docs/ja/**/*
+  - docs/he-il/**/*
+  - docs/pt-br/**/*
+  - docs/zh-cn/**/*
+  - docs/de/**/*
+  - docs/ru-ru/**/*
+CI:
+  - .github/**/*

.github/workflows/api.yml

@@ -0,0 +1,42 @@
+name: Update API Data
+
+on:
+  push:
+    branches:
+    - master
+    paths:
+    - 'keyboards/**'
+    - 'layouts/community/**'
+
+jobs:
+  api_data:
+    runs-on: ubuntu-latest
+    container: qmkfm/base_container
+
+    # protect against those who develop with their fork on master
+    if: github.repository == 'qmk/qmk_firmware'
+
+    steps:
+    - uses: actions/checkout@v2
+      with:
+        fetch-depth: 1
+        persist-credentials: false
+
+    - name: Generate API Data
+      run: qmk generate-api
+
+    - name: Install rsync
+      run: |
+        apt-get update && apt-get install -y rsync
+
+    - name: Upload API Data
+      uses: JamesIves/github-pages-deploy-action@3.7.1
+      with:
+        ACCESS_TOKEN: ${{ secrets.API_TOKEN_GITHUB }}
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        BRANCH: main
+        FOLDER: api_data/v1
+        CLEAN: true
+        GIT_CONFIG_EMAIL: hello@qmk.fm
+        REPOSITORY_NAME: qmk/qmk_keyboards
+        TARGET_FOLDER: v1

.github/workflows/auto_tag.yaml

@@ -0,0 +1,33 @@
+name: Essential files modified
+
+on:
+  push:
+    branches:
+    - master
+    paths:
+    - quantum/**/*
+    - tmk_core/**/*
+    - drivers/**/*
+    - tests/**/*
+    - util/**/*
+    - platforms/**/*
+    - Makefile
+    - '*.mk'
+
+jobs:
+  tag:
+    runs-on: ubuntu-latest
+
+    # protect against those who develop with their fork on master
+    if: github.repository == 'qmk/qmk_firmware'
+
+    steps:
+    - uses: actions/checkout@v2
+      with:
+        fetch-depth: 0
+
+    - name: Bump version and push tag
+      uses: anothrNick/github-tag-action@1.26.0
+      env:
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        DEFAULT_BUMP: 'patch'

.github/workflows/develop_api.yml

@@ -0,0 +1,42 @@
+name: Update Develop API Data
+
+on:
+  push:
+    branches:
+    - develop
+    paths:
+    - 'keyboards/**'
+    - 'layouts/community/**'
+
+jobs:
+  api_data:
+    runs-on: ubuntu-latest
+    container: qmkfm/base_container
+
+    # protect against those who work in their fork on develop
+    if: github.repository == 'qmk/qmk_firmware'
+
+    steps:
+    - uses: actions/checkout@v2
+      with:
+        fetch-depth: 1
+        persist-credentials: false
+
+    - name: Generate API Data
+      run: qmk generate-api
+
+    - name: Install rsync
+      run: |
+        apt-get update && apt-get install -y rsync
+
+    - name: Upload API Data
+      uses: JamesIves/github-pages-deploy-action@3.7.1
+      with:
+        ACCESS_TOKEN: ${{ secrets.API_TOKEN_GITHUB }}
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        BRANCH: main
+        FOLDER: api_data/v1
+        CLEAN: true
+        GIT_CONFIG_EMAIL: hello@qmk.fm
+        REPOSITORY_NAME: qmk/qmk_keyboards_devel
+        TARGET_FOLDER: v1

.github/workflows/develop_update.yml

@@ -0,0 +1,37 @@
+name: Update develop after master merge
+
+on:
+  push:
+    branches:
+    - master
+
+
+jobs:
+  develop_update:
+    runs-on: ubuntu-latest
+
+    if: github.repository == 'qmk/qmk_firmware'
+
+    steps:
+    - uses: actions/checkout@v2
+      with:
+        fetch-depth: 0
+
+    - name: Checkout develop
+      run: |
+        git fetch origin master develop
+        git checkout develop
+
+    - name: Check if branch locked
+      id: check_locked
+      uses: andstor/file-existence-action@v1
+      with:
+        files: ".locked"
+
+    - name: Update develop from master
+      if: steps.check_locked.outputs.files_exists == 'false'
+      run: |
+        git config --global user.name "QMK Bot"
+        git config --global user.email "hello@qmk.fm"
+        git merge origin/master
+        git push origin develop

.github/workflows/docs.yml

@@ -0,0 +1,43 @@
+name: Generate Docs
+
+on:
+  push:
+    branches:
+    - master
+    paths:
+    - 'tmk_core/**'
+    - 'quantum/**'
+    - 'platforms/**'
+    - 'docs/**'
+    - '.github/workflows/docs.yml'
+
+jobs:
+  generate:
+    runs-on: ubuntu-latest
+    container: qmkfm/base_container
+
+    # protect against those who develop with their fork on master
+    if: github.repository == 'qmk/qmk_firmware'
+
+    steps:
+    - uses: actions/checkout@v2
+      with:
+        fetch-depth: 1
+
+    - name: Install dependencies
+      run: |
+        apt-get update && apt-get install -y rsync nodejs npm doxygen
+        npm install -g moxygen
+
+    - name: Build docs
+      run: |
+        qmk --verbose generate-docs
+
+    - name: Deploy
+      uses: JamesIves/github-pages-deploy-action@3.7.1
+      with:
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        BASE_BRANCH: master
+        BRANCH: gh-pages
+        FOLDER: .build/docs
+        GIT_CONFIG_EMAIL: hello@qmk.fm

.github/workflows/format.yaml

@@ -0,0 +1,43 @@
+name: Format Codebase
+
+on:
+  push:
+    branches:
+    - master
+
+jobs:
+  format:
+    runs-on: ubuntu-latest
+    container: qmkfm/base_container
+
+    # protect against those who develop with their fork on master
+    if: github.repository == 'qmk/qmk_firmware'
+
+    steps:
+    - uses: actions/checkout@v2
+      with:
+        token: ${{ secrets.API_TOKEN_GITHUB }}
+
+    - name: Install dependencies
+      run: |
+        apt-get update && apt-get install -y dos2unix
+
+    - name: Format files
+      run: |
+        bin/qmk cformat -a
+        bin/qmk pyformat
+        bin/qmk fileformat
+
+    - name: Become QMK Bot
+      run: |
+        git config user.name 'QMK Bot'
+        git config user.email 'hello@qmk.fm'
+
+    - name: Create Pull Request
+      uses: peter-evans/create-pull-request@v3
+      with:
+        delete-branch: true
+        author: QMK Bot <hello@qmk.fm>
+        committer: QMK Bot <hello@qmk.fm>
+        commit-message: Format code according to conventions
+        title: '[CI] Format code according to conventions'

.github/workflows/info.yml

@@ -1,49 +0,0 @@
-name: PR Lint keyboards
-
-on:
-  pull_request:
-    paths:
-    - 'keyboards/**'
-
-jobs:
-  info:
-    runs-on: ubuntu-latest
-
-    container: qmkfm/base_container
-
-    steps:
-    - uses: actions/checkout@v2
-      with:
-        fetch-depth: 0
-
-    - name: Print info
-      run: |
-        git rev-parse --short HEAD
-        echo ${{ github.event.pull_request.base.sha }}
-        git diff --name-only ${{ github.event.pull_request.base.sha }}...
-
-    - name: Run qmk info
-      shell: 'bash {0}'
-      run: |
-        QMK_CHANGES=$(git diff --name-only ${{ github.event.pull_request.base.sha }}...)
-        QMK_KEYBOARDS=$(qmk list-keyboards)
-
-        exit_code=0
-        for KB in $QMK_KEYBOARDS; do
-          KEYBOARD_CHANGES=$(echo "$QMK_CHANGES" | grep -E '^(keyboards/'${KB}'/)')
-          if [[ -z "$KEYBOARD_CHANGES" ]]; then
-            # skip as no changes for this keyboard
-            continue
-          fi
-
-          KEYMAP_ONLY=$(echo "$KEYBOARD_CHANGES" | grep -cv /keymaps/)
-          if [[ $KEYMAP_ONLY -gt 0 ]]; then
-            echo "linting ${KB}"
-
-            # TODO: info info always returns 0 - right now the only way to know failure is to inspect log lines
-            qmk info -kb ${KB} 2>&1 | tee /tmp/$$
-            !(grep -cq ☒ /tmp/$$)
-            : $((exit_code = $exit_code + $?))
-          fi
-        done
-        exit $exit_code

.github/workflows/labeler.yml

@@ -0,0 +1,14 @@
+name: "Pull Request Labeler"
+
+on:
+  pull_request_target:
+    types: [opened, synchronize, reopened, ready_for_review, locked]
+
+jobs:
+  triage:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/labeler@main
+      with:
+        repo-token: "${{ secrets.GITHUB_TOKEN }}"
+        configuration-path: '.github/labeler.yml'

.github/workflows/lint.yml

@@ -0,0 +1,55 @@
+name: PR Lint keyboards
+
+on:
+  pull_request:
+    paths:
+    - 'keyboards/**'
+
+jobs:
+  lint:
+    runs-on: ubuntu-latest
+
+    container: qmkfm/base_container
+
+    steps:
+    - uses: actions/checkout@v2
+      with:
+        fetch-depth: 0
+
+    - uses: trilom/file-changes-action@v1.2.4
+      id: file_changes
+      with:
+        output: '\n'
+
+    - name: Print info
+      run: |
+        git rev-parse --short HEAD
+        echo ${{ github.event.pull_request.base.sha }}
+        echo '${{ steps.file_changes.outputs.files}}'
+
+    - name: Run qmk lint
+      shell: 'bash {0}'
+      run: |
+        QMK_CHANGES=$(echo -e '${{ steps.file_changes.outputs.files}}')
+        QMK_KEYBOARDS=$(qmk list-keyboards)
+
+        exit_code=0
+        for KB in $QMK_KEYBOARDS; do
+          KEYBOARD_CHANGES=$(echo "$QMK_CHANGES" | grep -E '^(keyboards/'${KB}'/)')
+          if [[ -z "$KEYBOARD_CHANGES" ]]; then
+            # skip as no changes for this keyboard
+            continue
+          fi
+
+          KEYMAP_ONLY=$(echo "$KEYBOARD_CHANGES" | grep -cv /keymaps/)
+          if [[ $KEYMAP_ONLY -gt 0 ]]; then
+            echo "linting ${KB}"
+
+            qmk lint --keyboard ${KB} && qmk info -l --keyboard ${KB}
+            exit_code=$(($exit_code + $?))
+          fi
+        done
+        if [[ $exit_code -gt 255 ]]; then
+            exit 255
+        fi
+        exit $exit_code

.gitignore

@@ -16,6 +16,7 @@
 *.swp
 tags
 *~
+api_data/v1
 build/
 .build/
 *.bak

.travis.yml

@@ -18,20 +18,15 @@ addons:
       - ubuntu-toolchain-r-test
       - llvm-toolchain-trusty-7
     packages:
-    - pandoc
     - diffutils
-    - dos2unix
-    - doxygen
     - clang-format-7
     - libstdc++-7-dev
-install:
-  - npm install -g moxygen
 script:
+  - git fetch --depth=50 origin $TRAVIS_BRANCH:$TRAVIS_BRANCH
   - git rev-parse --short HEAD
   - git diff --name-only HEAD $TRAVIS_BRANCH
   - bash util/travis_test.sh
   - bash util/travis_build.sh
-  - bash util/travis_docs.sh
 after_script:
   bash util/travis_compiled_push.sh
 notifications:

.vscode/settings.json

@@ -16,7 +16,8 @@
         "*.hpp": "cpp",
         "xstddef": "c",
         "type_traits": "c",
-        "utility": "c"
+        "utility": "c",
+        "ranges": "c"
     },
     "[markdown]": {
         "editor.trimAutoWhitespace": false,

Makefile

@@ -68,71 +68,15 @@ PATH_ELEMENTS := $(subst /, ,$(STARTING_DIR))
 # Initialize the path elements list for further processing
 $(eval $(call NEXT_PATH_ELEMENT))
 
-# This function sets the KEYBOARD; KEYMAP and SUBPROJECT to the correct
-# variables depending on which directory you stand in.
-# It's really a very simple if else chain, if you squint enough,
-# but the makefile syntax makes it very verbose.
-# If we are in a subfolder of keyboards
-#
-# *** No longer needed **
-#
-# ifeq ($(CURRENT_PATH_ELEMENT),keyboards)
-#     $(eval $(call NEXT_PATH_ELEMENT))
-#     KEYBOARD := $(CURRENT_PATH_ELEMENT)
-#     $(eval $(call NEXT_PATH_ELEMENT))
-#     # If we are in a subfolder of keymaps, or in other words in a keymap
-#     # folder
-#     ifeq ($(CURRENT_PATH_ELEMENT),keymaps)
-#         $(eval $(call NEXT_PATH_ELEMENT))
-#         KEYMAP := $(CURRENT_PATH_ELEMENT)
-#      # else if we are not in the keyboard folder itself
-#     else ifneq ($(CURRENT_PATH_ELEMENT),)
-#         # the we can assume it's a subproject, as no other folders
-#         # should have make files in them
-#         SUBPROJECT := $(CURRENT_PATH_ELEMENT)
-#         $(eval $(call NEXT_PATH_ELEMENT))
-#         # if we are inside a keymap folder of a subproject
-#         ifeq ($(CURRENT_PATH_ELEMENT),keymaps)
-#             $(eval $(call NEXT_PATH_ELEMENT))
-#             KEYMAP := $(CURRENT_PATH_ELEMENT)
-#         endif
-#     endif
-# endif
-
-define GET_KEYBOARDS
-ifndef ALT_GET_KEYBOARDS
-    All_RULES_MK := $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/rules.mk))
-    All_RULES_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/rules.mk))
-    All_RULES_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/*/rules.mk))
-    All_RULES_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/*/*/rules.mk))
-
-    KEYMAPS_MK := $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/keymaps/*/rules.mk))
-    KEYMAPS_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/keymaps/*/rules.mk))
-    KEYMAPS_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/*/keymaps/*/rules.mk))
-    KEYMAPS_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/*/*/keymaps/*/rules.mk))
-
-    KEYBOARDS := $$(sort $$(filter-out $$(KEYMAPS_MK), $$(All_RULES_MK)))
-else
-    KEYBOARDS := $(shell find keyboards/ -type f -iname "rules.mk" | grep -v keymaps | sed 's!keyboards/\(.*\)/rules.mk!\1!' | sort | uniq)
-endif
-endef
-
-$(eval $(call GET_KEYBOARDS))
-
-# Only consider folders with makefiles, to prevent errors in case there are extra folders
-#KEYBOARDS += $(patsubst $(ROOD_DIR)/keyboards/%/rules.mk,%,$(wildcard $(ROOT_DIR)/keyboards/*/*/rules.mk))
 
+# Phony targets to enable a few simple make commands outside the main processing below.
 .PHONY: list-keyboards
 list-keyboards:
-	echo $(KEYBOARDS)
-
-define PRINT_KEYBOARD
-	$(info $(PRINTING_KEYBOARD))
-endef
+	util/list_keyboards.sh | sort -u | tr '\n' ' '
 
 .PHONY: generate-keyboards-file
 generate-keyboards-file:
-	$(foreach PRINTING_KEYBOARD,$(KEYBOARDS),$(eval $(call PRINT_KEYBOARD)))
+	util/list_keyboards.sh | sort -u
 
 .PHONY: clean
 clean:
@@ -158,8 +102,6 @@ endif
 # Uncomment these for debugging
 # $(info Keyboard: $(KEYBOARD))
 # $(info Keymap: $(KEYMAP))
-# $(info Subproject: $(SUBPROJECT))
-# $(info Keyboards: $(KEYBOARDS))
 
 
 # Set the default goal depending on where we are running make from
@@ -217,7 +159,6 @@ endef
 # A recursive helper function for finding the longest match
 # $1 The list to be checked
 # It works by always removing the currently matched item from the list
-# and call itself recursively, until a match is found
 define TRY_TO_MATCH_RULE_FROM_LIST_HELPER2
     # Stop the recursion when the list is empty
     ifneq ($1,)
@@ -272,16 +213,29 @@ endef
 define PARSE_RULE
     RULE := $1
     COMMANDS :=
+    REQUIRE_PLATFORM_KEY :=
     # If the rule starts with all, then continue the parsing from
     # PARSE_ALL_KEYBOARDS
     ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all),true)
         KEYBOARD_RULE=all
         $$(eval $$(call PARSE_ALL_KEYBOARDS))
+    else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all-avr),true)
+        KEYBOARD_RULE=all
+        REQUIRE_PLATFORM_KEY := avr
+        $$(eval $$(call PARSE_ALL_KEYBOARDS))
+    else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all-chibios),true)
+        KEYBOARD_RULE=all
+        REQUIRE_PLATFORM_KEY := chibios
+        $$(eval $$(call PARSE_ALL_KEYBOARDS))
+    else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all-arm_atsam),true)
+        KEYBOARD_RULE=all
+        REQUIRE_PLATFORM_KEY := arm_atsam
+        $$(eval $$(call PARSE_ALL_KEYBOARDS))
     else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,test),true)
         $$(eval $$(call PARSE_TEST))
     # If the rule starts with the name of a known keyboard, then continue
     # the parsing from PARSE_KEYBOARD
-    else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(KEYBOARDS)),true)
+    else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(shell util/list_keyboards.sh | sort -u)),true)
         KEYBOARD_RULE=$$(MATCHED_ITEM)
         $$(eval $$(call PARSE_KEYBOARD,$$(MATCHED_ITEM)))
     # Otherwise use the KEYBOARD variable, which is determined either by
@@ -398,26 +352,9 @@ endef
 # if we are going to compile all keyboards, match the rest of the rule
 # for each of them
 define PARSE_ALL_KEYBOARDS
-    $$(eval $$(call PARSE_ALL_IN_LIST,PARSE_KEYBOARD,$(KEYBOARDS)))
+    $$(eval $$(call PARSE_ALL_IN_LIST,PARSE_KEYBOARD,$(shell util/list_keyboards.sh noci | sort -u)))
 endef
 
-# $1 Subproject
-# When entering this, the keyboard and subproject are known, so now we need
-# to determine which keymaps are going to get compiled
-# define PARSE_SUBPROJECT
-
-# endef
-
-# If we want to parse all subprojects, but the keyboard doesn't have any,
-# then use defaultsp instead
-# define PARSE_ALL_SUBPROJECTS
-#     ifeq ($$(SUBPROJECTS),)
-#         $$(eval $$(call PARSE_SUBPROJECT,defaultsp))
-#     else
-#         $$(eval $$(call PARSE_ALL_IN_LIST,PARSE_SUBPROJECT,$$(SUBPROJECTS)))
-#     endif
-# endef
-
 # Prints a list of all known keymaps for the given keyboard
 define LIST_ALL_KEYMAPS
     COMMAND_true_LIST_KEYMAPS := \
@@ -447,7 +384,7 @@ define PARSE_KEYMAP
     # Format it in bold
     KB_SP := $(BOLD)$$(KB_SP)$(NO_COLOR)
     # Specify the variables that we are passing forward to submake
-    MAKE_VARS := KEYBOARD=$$(CURRENT_KB) KEYMAP=$$(CURRENT_KM)
+    MAKE_VARS := KEYBOARD=$$(CURRENT_KB) KEYMAP=$$(CURRENT_KM) REQUIRE_PLATFORM_KEY=$$(REQUIRE_PLATFORM_KEY)
     # And the first part of the make command
     MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f build_keyboard.mk $$(MAKE_TARGET)
     # The message to display
@@ -466,6 +403,8 @@ define BUILD
         LOG=$$$$($$(MAKE_CMD) $$(MAKE_VARS) SILENT=true 2>&1) ; \
         if [ $$$$? -gt 0 ]; \
             then $$(PRINT_ERROR_PLAIN); \
+        elif [ "$$$$LOG" = "skipped" ] ; \
+            then $$(PRINT_SKIPPED_PLAIN); \
         elif [ "$$$$LOG" != "" ] ; \
             then $$(PRINT_WARNING_PLAIN); \
         else \
@@ -557,12 +496,12 @@ if [ $$error_occurred -gt 0 ]; then $(HANDLE_ERROR); fi;
 
 endef
 
-# Let's match everything, we handle all the rule parsing ourselves
+# Catch everything and parse the command line ourselves.
 .PHONY: %
 %:
 	# Check if we have the CMP tool installed
 	cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
-	# Ensure that bin/qmk works. This will be a failing check after the next develop merge on 2020 Aug 29.
+	# Ensure that bin/qmk works. This will be a failing check after the next develop merge
 	if ! bin/qmk hello 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi
 	# Check if the submodules are dirty, and display a warning if they are
 ifndef SKIP_GIT
@@ -593,25 +532,6 @@ endif
 	$(foreach TEST,$(sort $(TESTS)),$(RUN_TEST))
 	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
 
-# These no longer work because of the colon system
-
-# All should compile everything
-# .PHONY: all
-# all: all-keyboards test-all
-
-# Define some shortcuts, mostly for compatibility with the old syntax
-# .PHONY: all-keyboards
-# all-keyboards: all\:all\:all
-
-# .PHONY: all-keyboards-defaults
-# all-keyboards-defaults: all\:default
-
-# .PHONY: test
-# test: test-all
-
-# .PHONY: test-clean
-# test-clean: test-all-clean
-
 lib/%:
 	git submodule sync $?
 	git submodule update --init $?
@@ -637,12 +557,13 @@ else
 endif
 ifndef SKIP_VERSION
 BUILD_DATE := $(shell date +"%Y-%m-%d-%H:%M:%S")
+else
+BUILD_DATE := 2020-01-01-00:00:00
+endif
+
 $(shell echo '#define QMK_VERSION "$(GIT_VERSION)"' > $(ROOT_DIR)/quantum/version.h)
 $(shell echo '#define QMK_BUILDDATE "$(BUILD_DATE)"' >> $(ROOT_DIR)/quantum/version.h)
 $(shell echo '#define CHIBIOS_VERSION "$(CHIBIOS_VERSION)"' >> $(ROOT_DIR)/quantum/version.h)
 $(shell echo '#define CHIBIOS_CONTRIB_VERSION "$(CHIBIOS_CONTRIB_VERSION)"' >> $(ROOT_DIR)/quantum/version.h)
-else
-BUILD_DATE := NA
-endif
 
 include $(ROOT_DIR)/testlist.mk

api_data/_config.yml

@@ -0,0 +1 @@
+theme: jekyll-theme-cayman

api_data/readme.md

@@ -0,0 +1,5 @@
+# QMK Keyboard Metadata
+
+This directory contains machine parsable data about keyboards supported by QMK. The latest version is always available online at <https://keyboards.qmk.fm>.
+
+Do not edit anything here by hand. It is generated with the `qmk generate-api` command.

bootloader.mk

@@ -20,13 +20,19 @@
 # Sets the bootloader defined in the keyboard's/keymap's rules.mk
 # Current options:
 #
-# halfkay        PJRC Teensy
-# caterina       Pro Micro (Sparkfun/generic)
-# atmel-dfu      Atmel factory DFU
-# lufa-dfu       LUFA DFU
-# qmk-dfu        QMK DFU (LUFA + blinkenlight)
-# bootloadHID    HIDBootFlash compatible (ATmega32A)
-# USBasp         USBaspLoader (ATmega328P)
+# AVR:
+#     halfkay     PJRC Teensy
+#     caterina    Pro Micro (Sparkfun/generic)
+#     atmel-dfu   Atmel factory DFU
+#     lufa-dfu    LUFA DFU
+#     qmk-dfu     QMK DFU (LUFA + blinkenlight)
+#     bootloadHID HIDBootFlash compatible (ATmega32A)
+#     USBasp      USBaspLoader (ATmega328P)
+# ARM:
+#     kiibohd     Input:Club Kiibohd bootloader (only used on their boards)
+#     stm32duino  STM32Duino (STM32F103x8)
+#     stm32-dfu   STM32 USB DFU in ROM
+#     apm32-dfu   APM32 USB DFU in ROM
 #
 # BOOTLOADER_SIZE can still be defined manually, but it's recommended
 # you add any possible configuration to this list
@@ -34,30 +40,30 @@
 ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
     OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
         BOOTLOADER_SIZE = 4096
     endif
-    ifeq ($(strip $(MCU)), at90usb1286)
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
         BOOTLOADER_SIZE = 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
     OPT_DEFS += -DBOOTLOADER_LUFA_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
         BOOTLOADER_SIZE = 4096
     endif
-    ifeq ($(strip $(MCU)), at90usb1286)
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
         BOOTLOADER_SIZE = 8192
     endif
 endif
 ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
     OPT_DEFS += -DBOOTLOADER_QMK_DFU
     OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
         BOOTLOADER_SIZE = 4096
     endif
-    ifeq ($(strip $(MCU)), at90usb1286)
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
         BOOTLOADER_SIZE = 8192
     endif
 endif
@@ -89,7 +95,45 @@ ifeq ($(strip $(BOOTLOADER)), lufa-ms)
     BOOTLOADER_SIZE = 6144
     FIRMWARE_FORMAT = bin
 endif
-
 ifdef BOOTLOADER_SIZE
     OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))
 endif
+
+ifeq ($(strip $(BOOTLOADER)), stm32-dfu)
+    OPT_DEFS += -DBOOTLOADER_STM32_DFU
+
+    # Options to pass to dfu-util when flashing
+    DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
+    DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
+endif
+ifeq ($(strip $(BOOTLOADER)), apm32-dfu)
+    OPT_DEFS += -DBOOTLOADER_APM32_DFU
+
+    # Options to pass to dfu-util when flashing
+    DFU_ARGS ?= -d 314B:0106 -a 0 -s 0x08000000:leave
+    DFU_SUFFIX_ARGS ?= -v 314B -p 0106
+endif
+ifeq ($(strip $(BOOTLOADER)), kiibohd)
+    OPT_DEFS += -DBOOTLOADER_KIIBOHD
+    ifeq ($(strip $(MCU_ORIG)), MK20DX128)
+        MCU_LDSCRIPT = MK20DX128BLDR4
+    endif
+    ifeq ($(strip $(MCU_ORIG)), MK20DX256)
+        MCU_LDSCRIPT = MK20DX256BLDR8
+    endif
+
+    # Options to pass to dfu-util when flashing
+    DFU_ARGS = -d 1C11:B007
+    DFU_SUFFIX_ARGS = -v 1C11 -p B007
+endif
+ifeq ($(strip $(BOOTLOADER)), stm32duino)
+    OPT_DEFS += -DBOOTLOADER_STM32DUINO
+    MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
+    BOARD = STM32_F103_STM32DUINO
+    # STM32F103 does NOT have an USB bootloader in ROM (only serial), so setting anything here does not make much sense
+    STM32_BOOTLOADER_ADDRESS = 0x80000000
+
+    # Options to pass to dfu-util when flashing
+    DFU_ARGS = -d 1EAF:0003 -a 2 -R
+    DFU_SUFFIX_ARGS = -v 1EAF -p 0003
+endif

build_full_test.mk

@@ -30,4 +30,4 @@ $(TEST)_SRC += $(patsubst $(ROOTDIR)/%,%,$(wildcard $(TEST_PATH)/*.cpp))
 
 $(TEST)_DEFS=$(TMK_COMMON_DEFS) $(OPT_DEFS)
 $(TEST)_CONFIG=$(TEST_PATH)/config.h
-VPATH+=$(TOP_DIR)/tests/test_common
+VPATH+=$(TOP_DIR)/tests/test_common

build_keyboard.mk

@@ -16,7 +16,6 @@ include common.mk
 KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
 TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
 KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
-STM32_PATH := quantum/stm32
 
 # Force expansion
 TARGET := $(TARGET)
@@ -138,7 +137,7 @@ endif
 
 ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
     TARGET := $(TARGET)_proton_c
-    include $(STM32_PATH)/proton_c.mk
+    include platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk
     OPT_DEFS += -DCONVERT_TO_PROTON_C
 endif
 
@@ -148,12 +147,6 @@ endif
 
 include quantum/mcu_selection.mk
 
-ifdef MCU_FAMILY
-    OPT_DEFS += -DQMK_STM32
-    KEYBOARD_PATHS += $(STM32_PATH)
-endif
-
-
 # Find all the C source files to be compiled in subfolders.
 KEYBOARD_SRC :=
 
@@ -290,6 +283,9 @@ ifneq ("$(wildcard $(USER_PATH)/config.h)","")
     CONFIG_H += $(USER_PATH)/config.h
 endif
 
+# Disable features that a keyboard doesn't support
+-include disable_features.mk
+
 # Object files directory
 #     To put object files in current directory, use a dot (.), do NOT make
 #     this an empty or blank macro!
@@ -324,6 +320,13 @@ SRC += $(TMK_COMMON_SRC)
 OPT_DEFS += $(TMK_COMMON_DEFS)
 EXTRALDFLAGS += $(TMK_COMMON_LDFLAGS)
 
+SKIP_COMPILE := no
+ifneq ($(REQUIRE_PLATFORM_KEY),)
+    ifneq ($(REQUIRE_PLATFORM_KEY),$(PLATFORM_KEY))
+        SKIP_COMPILE := yes
+    endif
+endif
+
 include $(TMK_PATH)/$(PLATFORM_KEY).mk
 ifneq ($(strip $(PROTOCOL)),)
     include $(TMK_PATH)/protocol/$(strip $(shell echo $(PROTOCOL) | tr '[:upper:]' '[:lower:]')).mk
@@ -359,9 +362,16 @@ $(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(GFXINC)
 $(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
 
 # Default target.
+ifeq ($(SKIP_COMPILE),no)
 all: build check-size
+else
+all:
+	echo "skipped" >&2
+endif
+
 build: elf cpfirmware
 check-size: build
+check-md5: build
 objs-size: build
 
 include show_options.mk

build_test.mk

@@ -17,7 +17,7 @@ OUTPUTS := $(TEST_OBJ)/$(TEST) $(GTEST_OUTPUT)
 GTEST_INC := \
 	$(LIB_PATH)/googletest/googletest/include\
 	$(LIB_PATH)/googletest/googlemock/include\
-	
+
 GTEST_INTERNAL_INC :=\
 	$(LIB_PATH)/googletest/googletest\
 	$(LIB_PATH)/googletest/googlemock
@@ -27,7 +27,7 @@ $(GTEST_OUTPUT)_SRC :=\
 	googletest/src/gtest_main.cc\
 	googlemock/src/gmock-all.cc
 
-$(GTEST_OUTPUT)_DEFS := 
+$(GTEST_OUTPUT)_DEFS :=
 $(GTEST_OUTPUT)_INC := $(GTEST_INC) $(GTEST_INTERNAL_INC)
 
 LDFLAGS += -lstdc++ -lpthread -shared-libgcc
@@ -49,6 +49,7 @@ endif
 
 include common_features.mk
 include $(TMK_PATH)/common.mk
+include $(QUANTUM_PATH)/sequencer/tests/rules.mk
 include $(QUANTUM_PATH)/serial_link/tests/rules.mk
 ifneq ($(filter $(FULL_TESTS),$(TEST)),)
 include build_full_test.mk
@@ -65,4 +66,3 @@ include $(TMK_PATH)/rules.mk
 
 $(shell mkdir -p $(BUILD_DIR)/test 2>/dev/null)
 $(shell mkdir -p $(TEST_OBJ) 2>/dev/null)
-

common.mk

@@ -21,4 +21,5 @@ COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
 COMMON_VPATH += $(QUANTUM_PATH)/audio
 COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
 COMMON_VPATH += $(QUANTUM_PATH)/api
+COMMON_VPATH += $(QUANTUM_PATH)/sequencer
 COMMON_VPATH += $(DRIVER_PATH)

disable_features.mk

@@ -0,0 +1,31 @@
+# Unconditionally disable features that a keyboard advertises it doesn't support
+
+FEATURE_NAMES :=
+FEATURE_NAMES += ADAFRUIT_BLE
+FEATURE_NAMES += AUDIO
+FEATURE_NAMES += BACKLIGHT
+FEATURE_NAMES += BLUETOOTH
+FEATURE_NAMES += DIP_SWITCH
+FEATURE_NAMES += DYNAMIC_KEYMAP
+FEATURE_NAMES += ENCODER
+FEATURE_NAMES += HAPTIC
+FEATURE_NAMES += HD44780
+FEATURE_NAMES += IOS_DEVICE
+FEATURE_NAMES += LCD_BACKLIGHT
+FEATURE_NAMES += LCD
+FEATURE_NAMES += OLED
+FEATURE_NAMES += POINTING_DEVICE
+FEATURE_NAMES += PRINTING
+FEATURE_NAMES += PS2_MOUSE
+FEATURE_NAMES += RGBLIGHT
+FEATURE_NAMES += RGB_MATRIX
+FEATURE_NAMES += SLEEP_LED
+FEATURE_NAMES += SERIAL_LINK
+FEATURE_NAMES += STENO
+FEATURE_NAMES += SWAP_HANDS
+FEATURE_NAMES += VISUALIZER
+FEATURE_NAMES += WATCHDOG
+FEATURE_NAMES += XT
+
+$(foreach AFEATURE,$(FEATURE_NAMES),\
+	 $(if $(filter $($(AFEATURE)_SUPPORTED),no),$(eval $(AFEATURE)_ENABLE=no)))

docs/ChangeLog/20190830.md

@@ -50,4 +50,3 @@ This document marks the inaugural Breaking Change merge. A list of changes follo
 * `KC_DELT` was a redundant, undocumented alias for `KC_DELETE`
 * It has been removed and all its uses replaced with the more common `KC_DEL` alias
 * Around 90 keymaps (mostly for ErgoDox boards) have been modified as a result
-

docs/ChangeLog/20200829.md

@@ -0,0 +1,148 @@
+# QMK Breaking Change - 2020 Aug 29 Changelog
+
+Four times a year QMK runs a process for merging Breaking Changes. A Breaking Change is any change which modifies how QMK behaves in a way that is incompatible or potentially dangerous. We limit these changes to 4 times per year so that users can have confidence that updating their QMK tree will not break their keymaps.
+
+
+## Changes Requiring User Action :id=changes-requiring-user-action
+
+### Relocated Keyboards :id-relocated-keyboards
+
+#### The Key Company project consolidation ([#9547](https://github.com/qmk/qmk_firmware/pull/9547))
+#### relocating boards by flehrad to flehrad/ folder ([#9635](https://github.com/qmk/qmk_firmware/pull/9635))
+
+Keyboards released by The Key Company and keyboards designed by flehrad have moved to vendor folders. If you own any of the keyboards listed below, please use the new names to compile your firmware moving forward.
+
+Old Name               | New Name
+:--------------------- | :------------------
+candybar/lefty         | tkc/candybar/lefty
+candybar/righty        | tkc/candybar/righty
+m0lly                  | tkc/m0lly
+tkc1800                | tkc/tkc1800
+bigswitch              | flehrad/bigswitch
+handwired/downbubble   | flehrad/downbubble
+handwired/numbrero     | flehrad/numbrero
+snagpad                | flehrad/snagpad
+handwired/tradestation | flehrad/tradestation
+
+### Updated Keyboard Codebases :id=keyboard-updates
+
+#### Keebio RGB wiring update ([#7754](https://github.com/qmk/qmk_firmware/pull/7754))
+
+This pull request changes the configuration for Keebio split boards to use the same RGB strip wiring for each half, which provides the following improvements:
+
+* Easier wiring due to one fewer wire needed (the wire between left DOut to extra data pin) and the fact that wiring is the same for both halves.
+* RGB LEDs can be controlled by each half now instead of just master half.
+* Extra data line is freed up to allow for I2C usage instead of serial.
+
+If you have customized the value of `RGBLED_SPLIT` for your keymap, you will need to undefine it using `#undef RGBLED_SPLIT` before defining it to your customized value.
+
+This change affects:
+
+* BFO-9000
+* Fourier
+* Iris rev2
+* Levinson, revs. 1 and 2
+* Nyquist, revs. 1 and 2
+* Quefrency rev1
+* Viterbi, revs. 1 and 2
+
+### Changes to Core Functionality :id=core-updates
+
+* Bigger Combo index ([#9318](https://github.com/qmk/qmk_firmware/pull/9318))
+
+Allows the Combo feature to support more than 256 combos.
+
+Any fork that uses `process_combo_event` needs to update the function's first argument to `uint16_t`:
+
+* Old function: `void process_combo_event(uint8_t combo_index, bool pressed)`
+* New function: `void process_combo_event(uint16_t combo_index, bool pressed)`
+
+
+## Core Changes :id=core-changes
+
+### Fixes :id=core-fixes
+
+* Mousekeys: scrolling acceleration is no longer coupled to mouse movement acceleration ([#9174](https://github.com/qmk/qmk_firmware/pull/9174))
+* Keymap Extras: correctly assign Question Mark in Czech layout ([#9987](https://github.com/qmk/qmk_firmware/pull/9987))
+
+### Additions and Enhancements :id=core-additions
+
+* allow for WS2812 PWM to work on DMAMUX-capable devices ([#9471](https://github.com/qmk/qmk_firmware/pull/9471))
+  * Newer STM32 MCUs have a DMAMUX peripheral, which allows mapping of DMAs to different DMA streams, rather than hard-defining the target streams in silicon.
+  * Affects STM32L4+ devices, as well as the soon-to-be-supported-by-QMK STM32G4/H7 families.
+  * Tested on F303/Proton C (ChibiOS v19, non-DMAMUX), G474 (ChibiOS v20, with DMAMUX).
+* dual-bank STM32 bootloader support ([#8778](https://github.com/qmk/qmk_firmware/pull/8778) and [#9738](https://github.com/qmk/qmk_firmware/pull/9738))
+  * Adds support for STM32 dual-bank flash bootloaders, by toggling a GPIO during early init in order to charge an RC circuit attached to `BOOT0`.
+  * The main rationale behind this is that dual-bank STM32 devices unconditionally execute user-mode code, regardless of whether or not the user-mode code jumps to the bootloader. If either flash bank is valid (and `BOOT0` is low), then the built-in bootloader will skip any sort of DFU.
+  * This PR allows for the initialisation sequencing to charge the RC circuit based on the example circuit posted on Discord, effectively pulling `BOOT0` high before issuing the system reset. As the RC circuit takes a while to discharge, the system reset executes the ROM bootloader which subsequently sees `BOOT0` high, and starts executing the DFU routines.
+  * Tested with STM32L082 (with current QMK+current ChibiOS), and STM32G474 (against ChibiOS 20.x).
+* update Space Cadet and Tap Dance features to use Custom Tapping Term when appropriate ([#6259](https://github.com/qmk/qmk_firmware/pull/6259))
+  * For the Tap Dance feature, this completely removes the need for the `ACTION_TAP_DANCE_FN_ADVANCED_TIME` dance.
+* HID Joystick Interface ([#4226](https://github.com/qmk/qmk_firmware/pull/4226) and [#9949](https://github.com/qmk/qmk_firmware/pull/9949 "Fix Joystick Compile Issues"))
+  * This implements a joystick feature, including a joystick_task function called from TMK, specific keycodes for joystick buttons and a USB HID interface.
+  * Tested on V-USB backend and Proton C; compiles but untested on LUFA.
+  * In order to test, you have to add `JOYSTICK_ENABLE = yes` to your `rules.mk` and
+    ```c
+    #define JOYSTICK_BUTTON_COUNT 8
+    #define JOYSTICK_AXES_COUNT 2
+    ```
+    in your config.h.
+* Christmas RGB Underglow animation now fades between green and red ([#7648](https://github.com/qmk/qmk_firmware/pull/7648))
+  * `RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL` has been greatly decreased; please check your animation if you have customized this value.
+* layer state now initializes on startup ([#8318](https://github.com/qmk/qmk_firmware/pull/8318))
+  * This should produce more consistent behavior between the two functions and layer masks.
+* added support for HSV->RGB conversion without using CIE curve ([#9856](https://github.com/qmk/qmk_firmware/pull/9856))
+* added NOEEPROM functions for RGB Matrix ([#9487](https://github.com/qmk/qmk_firmware/pull/9487))
+  * Added eeprom_helpers for toggle, mode, sethsv, speed, similar to rgblight versions.
+  * Added set_speed function.
+  * Added helper functions, similar to those in rgblight, in order to add NOEEPROM versions of toggle, step, hue, sat, val, and speed.
+  * Minor: spelling correction for EEPROM in a debug message.
+* flashing firmware using `st-flash` utility from [STLink Tools](https://github.com/stlink-org/stlink) is now supported ([#9964](https://github.com/qmk/qmk_firmware/pull/9964))
+* add ability to dump all makefile variables for the specified target ([#8256](https://github.com/qmk/qmk_firmware/pull/8256))
+  * Adds a new subtarget to builds, `dump_vars`, which allows for printing out all the variables that make knows about, after all substitutions occur.
+  * Example: `make handwired/onekey/proton_c:default:dump_vars`
+* add ability to change the Auto Shift timeout in real time ([#8441](https://github.com/qmk/qmk_firmware/pull/8441))
+* added a timer implementation for backlight on ChibiOS ([#8291](https://github.com/qmk/qmk_firmware/pull/8291))
+* added a third endpoint to V-USB keyboards ([#9020](https://github.com/qmk/qmk_firmware/pull/9020))
+* added a method to read the OLED display buffer from user space ([#8777](https://github.com/qmk/qmk_firmware/pull/8777))
+* K-Type refactor ([#9864](https://github.com/qmk/qmk_firmware/pull/9864))
+  * The K-Type has been refactored to use QMK's native matrix scanning routine, and now has partial support for the RGB Matrix feature.
+* Joysticks can now be used without defining analog pins ([#10169](https://github.com/qmk/qmk_firmware/pull/10169))
+
+### Clean-ups and Optimizations :id=core-optimizations
+
+* iWRAP protocol removed ([#9284](https://github.com/qmk/qmk_firmware/pull/9284))
+* work begun for consolidation of ChibiOS platform files ([#8327](https://github.com/qmk/qmk_firmware/pull/8327) and [#9315](https://github.com/qmk/qmk_firmware/pull/9315))
+  * Start of the consolidation work to move the ChibiOS board definitions as well as the default set of configuration files for existing board definitions used by keyboards.
+    * Uses `/platforms/chibios` as previously discussed on discord.
+    * Consolidates the Proton C configs into the generic F303 definitions.
+    * Allows for defining a default set of `chconf.h`, `halconf.h`, and `mcuconf.h` files within the platform definition, which is able to be overridden by the keyboard directly, though include path ordering.
+    * Adds template `chconf.h`, `halconf.h`, `mcuconf.h`, and `board.h` that can be dropped into a keyboard directory, in order to override rather than replace the entire contents of the respective files.
+    * Removed Proton C QMK board definitions, falling back to ChibiOS board definitions with QMK overrides.
+* Various tidy-ups for USB descriptor code ([#9005](https://github.com/qmk/qmk_firmware/pull/9005))
+  * Renamed `keyboard_led_stats` in lufa.c and ChibiOS usb_main.c to `keyboard_led_state`, as well as `vusb_keyboard_leds`, for consistency
+  * Formatted CDC and MIDI descriptors better
+  * Removed `ENDPOINT_CONFIG` macro, it seems pointless and removes the need for endpoint address defines in the middle of the endpoint numbering enum
+  * Fixed (possibly?) V-USB `GET_REPORT` request handling. Not sure about this one, but the existing code appears to always return an empty report - now `send_keyboard` sets this variable to the current report, matching what the LUFA code does.
+* converted `CONSUMER2BLUEFRUIT()` and `CONSUMER2RN42()` macros to static inline functions ([#9055](https://github.com/qmk/qmk_firmware/pull/9055))
+* Additional cleanups for V-USB code ([#9310](https://github.com/qmk/qmk_firmware/pull/9310))
+  * Removing the UART stuff entirely, now that we have Console support. Also fixing up various other things; switching some `debug()` calls to `dprintf()`, moved `raw_hid_report` out of the way so that we can implement the shared endpoint stuff.
+* removed inclusion of `adafruit_ble.h` from `ssd1306.c` ([#9355](https://github.com/qmk/qmk_firmware/pull/9355))
+* `outputselect.c` is no longer compiled if Bluetooth is disabled ([#9356](https://github.com/qmk/qmk_firmware/pull/9356))
+* `analogRead()` deprecated in favor of `analogReadPin()` ([#9023](https://github.com/qmk/qmk_firmware/pull/9023))
+* forcibly disable NKRO on V-USB controllers ([#9054](https://github.com/qmk/qmk_firmware/pull/9054))
+* removed warning if running backlight on STM32F072 ([#10040](https://github.com/qmk/qmk_firmware/pull/10040))
+* removed unused CORTEX_VTOR_INIT rules.mk option ([#10053](https://github.com/qmk/qmk_firmware/pull/10053))
+* improved handling for enabling Link Time Optimization ([#9832](https://github.com/qmk/qmk_firmware/pull/9832))
+* streamline rules for supporting Kiibohd bootloader ([#10129](https://github.com/qmk/qmk_firmware/pull/10129))
+* Define `STM32_DMA_REQUIRED` when using DMA-based WS2812 driver on STM32 ([#10127](https://github.com/qmk/qmk_firmware/pull/10127))
+* fix DMA stream ID calculation in ws2812_pwm ([#10008](https://github.com/qmk/qmk_firmware/pull/10008))
+* remove support for Adafruit EZ Key Bluetooth controller ([#10103](https://github.com/qmk/qmk_firmware/pull/10103))
+
+
+## QMK Infrastructure and Internals :id=qmk-internals
+
+* Attempt to fix CI for non-master branches. ([#9308](https://github.com/qmk/qmk_firmware/pull/9308))
+  * Actually fetch the branch we're attempting to compare against.
+* Run `qmk cformat` on `develop` branch ([#9501](https://github.com/qmk/qmk_firmware/pull/9501))
+* minor refactor of Bluetooth API ([#9905](https://github.com/qmk/qmk_firmware/pull/9905))

docs/ChangeLog/20201128.md

@@ -0,0 +1,150 @@
+# QMK Breaking Change - 2020 Nov 28 Changelog
+
+Four times a year QMK runs a process for merging Breaking Changes. A Breaking Change is any change which modifies how QMK behaves in a way that is incompatible or potentially dangerous. We limit these changes to 4 times per year so that users can have confidence that updating their QMK tree will not break their keymaps.
+
+
+## Changes Requiring User Action :id=changes-requiring-user-action
+
+### Relocated Keyboards :id-relocated-keyboards
+
+#### Reduce Helix keyboard build variation ([#8669](https://github.com/qmk/qmk_firmware/pull/8669))
+
+The build commands for the Helix keyboard are:
+
+```
+make <helix_build_name>:<keymap_name>
+```
+
+For `<helix_build_name>`, specify the one in the rightmost column of the table below, such as `helix`,` helix/pico`.
+
+| before Oct 17 2019   |  Oct 17 2019            | Mar 10 2020             | Nov 28 2020             |
+| ---------------------|-------------------------|-------------------------| ------------------------|
+| helix/rev1           | helix/rev1              | helix/rev1              | helix/rev1              |
+| helix/pico           | helix/pico              | helix/pico              | helix/pico              |
+|                      | helix/pico/back         | helix/pico/back         | helix/pico/back         |
+|                      | helix/pico/under        | helix/pico/under        | helix/pico/under        |
+|                      |                         | helix/pico/sc           | --                      |
+|                      |                         | helix/pico/sc/back      | helix/pico/sc           |
+|                      |                         | helix/pico/sc/under     | --                      |
+| helix/rev2 (=helix)  | helix/rev2 (=helix)     | helix/rev2 (=helix)     | --                      |
+|                      | helix/rev2/back         | helix/rev2/back         | --                      |
+|                      | helix/rev2/back/oled    | helix/rev2/back/oled    | ( --> helix/rev2/back)  |
+|                      | helix/rev2/oled         | helix/rev2/oled         | helix/rev2　(=helix)     |
+|                      | helix/rev2/oled/back    | helix/rev2/oled/back    | helix/rev2/back         |
+|                      | helix/rev2/oled/under   | helix/rev2/oled/under   | helix/rev2/under        |
+|                      |                         | helix/rev2/sc           | --                      |
+|                      |                         | helix/rev2/sc/back      | --                      |
+|                      |                         | helix/rev2/sc/oled      | --                      |
+|                      |                         | helix/rev2/sc/oledback  | helix/rev2/sc           |
+|                      |                         | helix/rev2/sc/oledunder | --                      |
+|                      |                         | helix/rev2/sc/under     | --                      |
+|                      | helix/rev2/under        | helix/rev2/under        | --                      |
+|                      | helix/rev2/under/oled   | helix/rev2/under/oled   | ( --> helix/rev2/under) |
+
+#### Update the Speedo firmware for v3.0 ([#10657](https://github.com/qmk/qmk_firmware/pull/10657))
+
+The Speedo keyboard has moved to `cozykeys/speedo/v2` as the designer prepares to release the Speedo v3.0.
+
+| Previous Name | New Name                   |
+| :------------ | :------------------------- |
+| speedo        | cozykeys/speedo/v2         |
+| --            | cozykeys/speedo/v3 **new** |
+
+#### Maartenwut/Maarten name change to evyd13/Evy ([#10274](https://github.com/qmk/qmk_firmware/pull/10274))
+
+Maartenwut has rebranded as @evyd13, and all released Maartenwut boards have moved.
+
+| Previous Name          | New Name           |
+| :--------------------- | :----------------- |
+| maartenwut/atom47/rev2 | evyd13/atom47/rev2 |
+| maartenwut/atom47/rev3 | evyd13/atom47/rev3 |
+| maartenwut/eon40       | evyd13/eon40       |
+| maartenwut/eon65       | evyd13/eon65       |
+| maartenwut/eon75       | evyd13/eon75       |
+| maartenwut/eon87       | evyd13/eon87       |
+| maartenwut/eon95       | evyd13/eon95       |
+| maartenwut/gh80_1800   | evyd13/gh80_1800   |
+| maartenwut/gh80_3700   | evyd13/gh80_3700   |
+| maartenwut/minitomic   | evyd13/minitomic   |
+| maartenwut/mx5160      | evyd13/mx5160      |
+| maartenwut/nt660       | evyd13/nt660       |
+| maartenwut/omrontkl    | evyd13/omrontkl    |
+| maartenwut/plain60     | evyd13/plain60     |
+| maartenwut/pockettype  | evyd13/pockettype  |
+| maartenwut/quackfire   | evyd13/quackfire   |
+| maartenwut/solheim68   | evyd13/solheim68   |
+| maartenwut/ta65        | evyd13/ta65        |
+| maartenwut/wasdat      | evyd13/wasdat      |
+| maartenwut/wasdat_code | evyd13/wasdat_code |
+| maartenwut/wonderland  | evyd13/wonderland  |
+
+#### Xelus Valor and Dawn60 Refactors ([#10512](https://github.com/qmk/qmk_firmware/pull/10512), [#10584](https://github.com/qmk/qmk_firmware/pull/10584))
+
+The Valor and Dawn60 keyboards by Xelus22 both now require their revisions to be specified when compiling.
+
+| Previous Name | New Name          |
+| :------------ | :---------------- |
+| xelus/dawn60  | xelus/dawn60/rev1 |
+| xelus/valor   | xelus/valor/rev1  |
+
+
+### Updated Keyboard Codebases :id=keyboard-updates
+
+#### AEboards EXT65 Refactor ([#10820](https://github.com/qmk/qmk_firmware/pull/10820))
+
+The EXT65 codebase has been reworked so keymaps can be used with either revision.
+
+
+## Core Changes :id=core-changes
+
+### Fixes :id=core-fixes
+
+* Reconnect the USB if users wake up a computer from the keyboard to restore the USB state ([#10088](https://github.com/qmk/qmk_firmware/pull/10088))
+* Fix cursor position bug in oled_write_raw functions ([#10800](https://github.com/qmk/qmk_firmware/pull/10800))
+
+### Additions and Enhancements :id=core-additions
+
+* Allow MATRIX_ROWS to be greater than 32 ([#10183](https://github.com/qmk/qmk_firmware/pull/10183))
+* Add support for soft serial to ATmega32U2 ([#10204](https://github.com/qmk/qmk_firmware/pull/10204))
+* Allow direct control of MIDI velocity value ([#9940](https://github.com/qmk/qmk_firmware/pull/9940))
+* Joystick 16-bit support ([#10439](https://github.com/qmk/qmk_firmware/pull/10439))
+* Allow encoder resolutions to be set per encoder ([#10259](https://github.com/qmk/qmk_firmware/pull/10259))
+* Share button state from mousekey to pointing_device ([#10179](https://github.com/qmk/qmk_firmware/pull/10179))
+* Add advanced/efficient RGB Matrix Indicators ([#8564](https://github.com/qmk/qmk_firmware/pull/8564))
+* OLED display update interval support ([#10388](https://github.com/qmk/qmk_firmware/pull/10388))
+* Per-Key Retro Tapping ([#10622](https://github.com/qmk/qmk_firmware/pull/10622))
+* Allow backlight duty cycle limit ([#10260](https://github.com/qmk/qmk_firmware/pull/10260))
+* Add step sequencer feature ([#9703](https://github.com/qmk/qmk_firmware/pull/9703))
+* Added `add_oneshot_mods` & `del_oneshot_mods` ([#10549](https://github.com/qmk/qmk_firmware/pull/10549))
+* Add AT90USB support for serial.c ([#10706](https://github.com/qmk/qmk_firmware/pull/10706))
+* Auto shift: support repeats and early registration (#9826)
+
+### Clean-ups and Optimizations :id=core-optimizations
+
+* Haptic and solenoid cleanup ([#9700](https://github.com/qmk/qmk_firmware/pull/9700))
+* XD75 cleanup ([#10524](https://github.com/qmk/qmk_firmware/pull/10524))
+* Minor change to behavior allowing display updates to continue between task ticks ([#10750](https://github.com/qmk/qmk_firmware/pull/10750))
+* Change some GPIO manipulations in matrix.c to be atomic ([#10491](https://github.com/qmk/qmk_firmware/pull/10491))
+* combine repeated lines of code for ATmega32U2, ATmega16U2, ATmega328 and ATmega328P ([#10837](https://github.com/qmk/qmk_firmware/pull/10837))
+* Remove references to HD44780 ([#10735](https://github.com/qmk/qmk_firmware/pull/10735))
+
+
+## QMK Infrastructure and Internals :id=qmk-internals
+
+* Add ability to build a subset of all keyboards based on platform. ([#10420](https://github.com/qmk/qmk_firmware/pull/10420))
+* Initialise EEPROM drivers at startup, instead of upon first execution ([#10438](https://github.com/qmk/qmk_firmware/pull/10438))
+* Make bootloader_jump weak for ChibiOS ([#10417](https://github.com/qmk/qmk_firmware/pull/10417))
+* Support for STM32 GPIOF,G,H,I,J,K ([#10206](https://github.com/qmk/qmk_firmware/pull/10206))
+* Add milc as a dependency and remove the installed milc ([#10563](https://github.com/qmk/qmk_firmware/pull/10563))
+* ChibiOS upgrade: early init conversions ([#10214](https://github.com/qmk/qmk_firmware/pull/10214))
+* ChibiOS upgrade: configuration file migrator ([#9952](https://github.com/qmk/qmk_firmware/pull/9952))
+* Add definition based on currently-selected serial driver. ([#10716](https://github.com/qmk/qmk_firmware/pull/10716))
+* Allow for modification of output RGB values when using rgblight/rgb_matrix. ([#10638](https://github.com/qmk/qmk_firmware/pull/10638))
+* Allow keyboards/keymaps to execute code at each main loop iteration ([#10530](https://github.com/qmk/qmk_firmware/pull/10530))
+* qmk cformat ([#10767](https://github.com/qmk/qmk_firmware/pull/10767))
+* Add a Make variable to easily enable DEBUG_MATRIX_SCAN_RATE on the command line ([#10824](https://github.com/qmk/qmk_firmware/pull/10824))
+* update Chibios OS USB for the OTG driver ([#8893](https://github.com/qmk/qmk_firmware/pull/8893))
+* Fixup version.h writing when using `SKIP_VERSION=yes` ([#10972](https://github.com/qmk/qmk_firmware/pull/10972), [#10974](https://github.com/qmk/qmk_firmware/pull/10974))
+* Rename ledmatrix.h to match .c file ([#7949](https://github.com/qmk/qmk_firmware/pull/7949))
+* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER ([#10231](https://github.com/qmk/qmk_firmware/pull/10231))
+* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER ([#10840](https://github.com/qmk/qmk_firmware/pull/10840))

docs/README.md

@@ -1,30 +1,24 @@
 # Quantum Mechanical Keyboard Firmware
 
-[![Current Version](https://img.shields.io/github/tag/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/tags)
-[![Build Status](https://travis-ci.org/qmk/qmk_firmware.svg?branch=master)](https://travis-ci.org/qmk/qmk_firmware)
-[![Discord](https://img.shields.io/discord/440868230475677696.svg)](https://discord.gg/Uq7gcHh)
-[![Docs Status](https://img.shields.io/badge/docs-ready-orange.svg)](https://docs.qmk.fm)
-[![GitHub contributors](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
-[![GitHub forks](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
-
 ## What is QMK Firmware?
 
 QMK (*Quantum Mechanical Keyboard*) is an open source community centered around developing computer input devices. The community encompasses all sorts of input devices, such as keyboards, mice, and MIDI devices. A core group of collaborators maintains [QMK Firmware](https://github.com/qmk/qmk_firmware), [QMK Configurator](https://config.qmk.fm), [QMK Toolbox](https://github.com/qmk/qmk_toolbox), [qmk.fm](https://qmk.fm), and this documentation with the help of community members like you.
 
 ## Get Started
 
-Totally new to QMK? There are two ways to get started:
+<div class="flex-container">
 
-* Basic: [QMK Configurator](https://config.qmk.fm)
-    * Just select your keyboard from the dropdown and program your keyboard.
-    * We have an [introductory video](https://www.youtube.com/watch?v=-imgglzDMdY) you can watch.
-    * There is also an overview [document you can read](newbs_building_firmware_configurator.md).
-* Advanced: [Use The Source](newbs.md)
-    * More powerful, but harder to use
+?> **Basic** [QMK Configurator](newbs_building_firmware_configurator.md) <br>
+User friendly graphical interfaces, no programming knowledge required.
+
+?> **Advanced** [Use The Source](newbs.md) <br> 
+More powerful, but harder to use.
+
+</div>
 
 ## Make It Yours
 
-QMK has lots of [features](features.md) to explore, and a good deal of reference documentation to dig through. Most features are taken advantage of by modifying your [keymap](keymap.md), and changing the [keycodes](keycodes.md).
+QMK has lots of features to explore, and a good deal of reference documentation to dig through. Most features are taken advantage of by modifying your [keymap](keymap.md), and changing the [keycodes](keycodes.md).
 
 ## Need help?
 

docs/_summary.md

@@ -3,7 +3,6 @@
   * [Setup](newbs_getting_started.md)
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
-  * [Testing and Debugging](newbs_testing_debugging.md)
   * [Getting Help/Support](support.md)
   * [Other Resources](newbs_learn_more_resources.md)
   * [Syllabus](syllabus.md)
@@ -11,7 +10,8 @@
 * FAQs
   * [General FAQ](faq_general.md)
   * [Build/Compile QMK](faq_build.md)
-  * [Debugging/Troubleshooting QMK](faq_debug.md)
+  * [Troubleshooting QMK](faq_misc.md)
+  * [Debugging QMK](faq_debug.md)
   * [Keymap FAQ](faq_keymap.md)
   * [Glossary](reference_glossary.md)
 
@@ -23,6 +23,7 @@
     * [Overview](api_overview.md)
     * [API Documentation](api_docs.md)
     * [Keyboard Support](reference_configurator_support.md)
+    * [Adding Default Keymaps](configurator_default_keymaps.md)
 
 * CLI
     * [Overview](cli.md)
@@ -79,6 +80,7 @@
     * [One Shot Keys](one_shot_keys.md)
     * [Pointing Device](feature_pointing_device.md)
     * [Raw HID](feature_rawhid.md)
+    * [Sequencer](feature_sequencer.md)
     * [Swap Hands](feature_swap_hands.md)
     * [Tap Dance](feature_tap_dance.md)
     * [Tap-Hold Configuration](tap_hold.md)
@@ -103,6 +105,8 @@
     * [DIP Switch](feature_dip_switch.md)
     * [Encoders](feature_encoders.md)
     * [Haptic Feedback](feature_haptic_feedback.md)
+    * [Joystick](feature_joystick.md)
+    * [LED Indicators](feature_led_indicators.md)
     * [Proton C Conversion](proton_c_conversion.md)
     * [PS/2 Mouse](feature_ps2_mouse.md)
     * [Split Keyboard](feature_split_keyboard.md)
@@ -111,10 +115,13 @@
     * [Velocikey](feature_velocikey.md)
 
 * Developing QMK
+  * [PR Checklist](pr_checklist.md)
   * Breaking Changes
     * [Overview](breaking_changes.md)
     * [My Pull Request Was Flagged](breaking_changes_instructions.md)
     * History
+      * [2020 Nov 28](ChangeLog/20201128.md)
+      * [2020 Aug 29](ChangeLog/20200829.md)
       * [2020 May 30](ChangeLog/20200530.md)
       * [2020 Feb 29](ChangeLog/20200229.md)
       * [2019 Aug 30](ChangeLog/20190830.md)

docs/adc_driver.md

@@ -45,9 +45,9 @@ Then place this include at the top of your code:
 
 Note that some of these pins are doubled-up on ADCs with the same channel. This is because the pins can be used for either ADC.
 
-Also note that the F0 and F3 use different numbering schemes. The F0 has a single ADC and the channels are 0-based, whereas the F3 has 4 ADCs and the channels are 1 based. This is because the F0 uses the `ADCv1` implementation of the ADC, whereas the F3 uses the `ADCv3` implementation.
+Also note that the F0 and F3 use different numbering schemes. The F0 has a single ADC and the channels are 0-indexed, whereas the F3 has 4 ADCs and the channels are 1-indexed. This is because the F0 uses the `ADCv1` implementation of the ADC, whereas the F3 uses the `ADCv3` implementation.
 
-|ADC|Channel|STM32F0XX|STM32F3XX|
+|ADC|Channel|STM32F0xx|STM32F3xx|
 |---|-------|---------|---------|
 |1  |0      |`A0`     |         |
 |1  |1      |`A1`     |`A0`     |
@@ -122,32 +122,29 @@ Also note that the F0 and F3 use different numbering schemes. The F0 has a singl
 |Function                    |Description                                                                                                        |
 |----------------------------|-------------------------------------------------------------------------------------------------------------------|
 |`analogReference(mode)`     |Sets the analog voltage reference source. Must be one of `ADC_REF_EXTERNAL`, `ADC_REF_POWER` or `ADC_REF_INTERNAL`.|
-|`analogRead(pin)`           |Reads the value from the specified Arduino pin, eg. `4` for ADC6 on the ATmega32U4.                                |
-|`analogReadPin(pin)`        |Reads the value from the specified QMK pin, eg. `F6` for ADC6 on the ATmega32U4.                                   |
-|`pinToMux(pin)`             |Translates a given QMK pin to a mux value. If an unsupported pin is given, returns the mux value for "0V (GND)".   |
+|`analogReadPin(pin)`        |Reads the value from the specified pin, eg. `F6` for ADC6 on the ATmega32U4.                                       |
+|`pinToMux(pin)`             |Translates a given pin to a mux value. If an unsupported pin is given, returns the mux value for "0V (GND)".       |
 |`adc_read(mux)`             |Reads the value from the ADC according to the specified mux. See your MCU's datasheet for more information.        |
 
 ### ARM
 
-Note that care was taken to match all of the functions used for AVR devices, however complications in the ARM platform prevent that from always being possible. For example, the `STM32` chips do not have assigned Arduino pins. We could use the default pin numbers, but those numbers change based on the package type of the device. For this reason, please specify your target pins with their identifiers (`A0`, `F3`, etc.). Also note that there are some variants of functions that accept the target ADC for the pin. Some pins can be used for multiple ADCs, and this specified can help you pick which ADC will be used to interact with that pin.
-
-|Function                    |Description                                                                                                         |
-|----------------------------|--------------------------------------------------------------------------------------------------------------------|
-|`analogReadPin(pin)`        |Reads the value from the specified QMK pin, eg. `A0` for channel 0 on the STM32F0 and ADC1 channel 1 on the STM32F3. Note that if a pin can be used for multiple ADCs, it will pick the lower numbered ADC for this function. eg. `C0` will be channel 6 of ADC 1 when it could be used for ADC 2 as well.|
-|`analogReadPinAdc(pin, adc)`|Reads the value from the specified QMK pin and ADC, eg. `C0, 1` will read from channel 6, ADC 2 instead of ADC 1. Note that the ADCs are 0-indexed for this function.|
-|`pinToMux(pin)`             |Translates a given QMK pin to a channel and ADC combination. If an unsupported pin is given, returns the mux value for "0V (GND)".|
-|`adc_read(mux)`             |Reads the value from the ADC according to the specified pin and adc combination. See your MCU's datasheet for more information.|
+|Function                    |Description                                                                                                                                                                                                                                                                                           |
+|----------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+|`analogReadPin(pin)`        |Reads the value from the specified pin, eg. `A0` for channel 0 on the STM32F0 and ADC1 channel 1 on the STM32F3. Note that if a pin can be used for multiple ADCs, it will pick the lower numbered ADC for this function. eg. `C0` will be channel 6 of ADC 1 when it could be used for ADC 2 as well.|
+|`analogReadPinAdc(pin, adc)`|Reads the value from the specified pin and ADC, eg. `C0, 1` will read from channel 6, ADC 2 instead of ADC 1. Note that the ADCs are 0-indexed for this function.                                                                                                                                     |
+|`pinToMux(pin)`             |Translates a given pin to a channel and ADC combination. If an unsupported pin is given, returns the mux value for "0V (GND)".                                                                                                                                                                        |
+|`adc_read(mux)`             |Reads the value from the ADC according to the specified pin and ADC combination. See your MCU's datasheet for more information.                                                                                                                                                                       |
 
 ## Configuration
 
 ## ARM
 
-The ARM implementation of the ADC has a few additional options that you can override in your own keyboards and keymaps to change how it operates.
+The ARM implementation of the ADC has a few additional options that you can override in your own keyboards and keymaps to change how it operates. Please consult the corresponding `hal_adc_lld.h` in ChibiOS for your specific microcontroller for further documentation on your available options.
 
-|`#define`          |Type  |Default              |Description|
-|-------------------|------|---------------------|-----------|
-|ADC_CIRCULAR_BUFFER|`bool`|`false`              |If `TRUE`, then the implementation will use a circular buffer.|
-|ADC_NUM_CHANNELS   |`int` |`1`                  |Sets the number of channels that will be scanned as part of an ADC operation. The current implementation only supports `1`.|
-|ADC_BUFFER_DEPTH   |`int` |`2`                  |Sets the depth of each result. Since we are only getting a 12-bit result by default, we set this to `2` bytes so we can contain our one value. This could be set to 1 if you opt for a 8-bit or lower result.|
-|ADC_SAMPLING_RATE  |`int` |`ADC_SMPR_SMP_1P5`   |Sets the sampling rate of the ADC. By default, it is set to the fastest setting. Please consult the corresponding `hal_adc_lld.h` in ChibiOS for your specific microcontroller for further documentation on your available options.|
-|ADC_RESOLUTION     |`int` |`ADC_CFGR1_RES_12BIT`|The resolution of your result. We choose 12 bit by default, but you can opt for 12, 10, 8, or 6 bit. Please consult the corresponding `hal_adc_lld.h` in ChibiOS for your specific microcontroller for further documentation on your available options.|
+|`#define`            |Type  |Default              |Description                                                                                                                                                                                                 |
+|---------------------|------|---------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+|`ADC_CIRCULAR_BUFFER`|`bool`|`false`              |If `true`, then the implementation will use a circular buffer.                                                                                                                                              |
+|`ADC_NUM_CHANNELS`   |`int` |`1`                  |Sets the number of channels that will be scanned as part of an ADC operation. The current implementation only supports `1`.                                                                                 |
+|`ADC_BUFFER_DEPTH`   |`int` |`2`                  |Sets the depth of each result. Since we are only getting a 12-bit result by default, we set this to 2 bytes so we can contain our one value. This could be set to 1 if you opt for an 8-bit or lower result.|
+|`ADC_SAMPLING_RATE`  |`int` |`ADC_SMPR_SMP_1P5`   |Sets the sampling rate of the ADC. By default, it is set to the fastest setting.                                                                                                                            |
+|`ADC_RESOLUTION`     |`int` |`ADC_CFGR1_RES_12BIT`|The resolution of your result. We choose 12 bit by default, but you can opt for 12, 10, 8, or 6 bit.                                                                                                        |