for NDOF devices
I applied the patch but cant test so please
let me know if any problem.
the plugin itself can be found either
on Ettore site http://cubelogic/blender/
or on my site http://jlp.nerim.net/dev/6dof/
on my site there is also the source of
mac plugin
-----
Bugfix #6847: Boolean code was marking some valid faces as "PHANTOM" when the
three vertices were nearly co-linear (according to its tests). This
introduced holes into one or both meshes which could then result in either
holes in the final results and/or spurrious faces which should have been
split.
This commit removes the code in question until either an alternative test is
coded.
which caused faces of convex objects to be classified wrongly. Also removed
some dead code. For convex objects, the BSP trees would also be literally
orders of magnitude larger than they were supposed to be (one test with a
5000 face torus reduced the BSP tree size from 5.96 million nodes to just 72.1
thousand).
work only in non camera mode in 3D view
need the external plug-in to be compiled separately
line 894 of ghostwinlay.c must be replaced with
values adapted at your system
see mailing list for features planned and how
to use
notes :
it compiles but is non functional
lacks the platform specific changes in ghost ( i cant test windows)
lacks the code for plug-in.
the platform specific code will be added when we sync with Ettore work
the plug-in itself cannot be added here
- fix for 3DPlugin compile
- cleanup of bullet path
- removed PHY_ODE project from 3D plugin too, not used anymore
Now all configurations should build again, let me know of any problems!
Not been able to test if the 3DPlugin is actually working,is job for another day ;)
Also the 3DPlugin is compiled without OpenExr, this needs to be looked into once too.
- fixed WinTab locking positioning into absolute mode
- hopefully fixes [ #5586 ] Cursor control
Note: Setting the extent of the digitizing context causes Application to override
system settings for pen/mouse control. Removing this fixed the issue.
headers <al.h>, <alc.h>, and <alut.h> instead of <AL/al.h>, <AL/alc.h>,
and <AL/alut.h>
(cmake generated makefiles now work out of the box on my intel mac)
on OSX to have slow selection and mouse response.
Code from the previous commit is still there, but the #define that
triggers it has been commented out.
- GEdon't crash when attempting to add constraint on game objects without physics controller
- GEimproved some physics -> graphics synchronization issues
- small experiment with game engine timing to smooth framerate/reduce tearing
- removed warnings in attributes.cpp,
- and a first Klockwork bug fix: removed NULL returns in ntl_ray.h,
several other issues mentioned in the Klockwork report
are either hard to fix or not really errors...
I should have talked to joeedh before committing last time...
This is an another attempt to fix the mingw long commandline
issue on all versions of windows (I didn't realize that the
2k in Win2k refered to the length of the commandline).
In this version, I break libsrc.a up so that no archive has
more than 30 object files (adjustable with one line of
code). I also fudge the priority numbers to ensure correct
linking. This was done in a "guess the number" way until
it worked, so please test and please check for correctness.
WINDOWS CRASH EMULATION!
If you use the -d (debug) argument for starting blender, it will now:
- set all freed memory to 0xFFFFFFFF
- set all malloced memory to 0xFFFFFFFF
The first option will give nice crashers when you read from freed memory.
The second option is for OSX especially, it has the nasty habit to give
zeroed mallocs.
duplicate code. Also removed redundant files from the bsp module,
that where replaced by boolop last year, no sense in updating them
for these changes. On the user level things should still work the
same, this is only preparation work.
Not counting the removed files, -1501 lines of code, not too bad :)
Basic support for normal pressure sensitivity is implemented, adding other features like tilt etc. shouldn't be too difficult, now that basic support is there.
Tested with WACOM Volito on Windows XP using the pressure sensitivity with texture paint to change size of the brush .
Added additional include dir to scons, and MSVC 7 project files - other build systems might have to be updated.
#4742 exported normals are now correct
#4821 & 4956 for complex movements in/outflows can now also
use the animated mesh option
- new features
* isosurface subdivision: directly
creates a finer surface mesh from the simulation data.
this increases simulation time and harddisk usage, though, so
be careful - usually values of 2-4 should be enough.
* fluidsim particles: extended model for particle
simulation and generation. When isosurface subdivision is enabled,
the particles are now included in the surface generation,
giving a better impression of a single connected surface.
Note - the particles are only included in the final surface
mesh, so the preview surface shows none of the particle
effects.
* particle loading: different types of particles can now be selected for
display: drops, floats and tracers. This is a bit obsolete
due to the extensions mentioned above, but might still be useful.
Floats are just particles floating on the fluid surface, could
be used for e.g. foam.
* moving objects impact factor: this is another tweaking option,
as the handling of moving objects is still not conserving
mass. setting this to zero simply deletes the fluid, 1 is
the default, while larger values cause a stronger
impact. For tweaking the simulation: if fluid disappears, try
increasing this value, and if too much is appearing reduce it.
You can even use negative values for some strange results :)
- more code cleanup, e.g. removed config file writing in fluidsim.c,
added additional safety checks for particles & fluidsim domains (these
currently dont work together). I also removed the "build particles"
debug message in effects.c (seemed to be unnecessary?).
Some more info on the new features:
Here are two test animations showing the difference between
using the particle generation with isosurface subdivision.
This is how it would look with the old solver version:
http://www10.informatik.uni-erlangen.de/~sinithue/blender/fluid6_fl6manc4_1noparts.mpg
and this with the new one:
http://www10.informatik.uni-erlangen.de/~sinithue/blender/fluid6_fl6manc4_2wparts.mpg
Both simulations use a resolution of 64, however, the version with particles
takes significantly longer (almost twice as long).
The .blend file for a similar setup can be found here:
http://www10.informatik.uni-erlangen.de/~sinithue/blender/fluid6_testmanc4.blend
(Minor Tips for this file: dont enable subdivions of characters until rendering,
thus leave off for simulation, as it uses the rendering settings! For making
nice pictures switch on subdivion, and OSA.)
And here's a picture of old vs. new (for webpage or so):
http://www10.informatik.uni-erlangen.de/~sinithue/blender/fluid6_manc4compare.png
Boolean crashed when using vertexcolors or UVs. The fix is disputable... it
just always returns a valid char * for "face vertex material", whatever
that may be... this fix seems not to break anything.
Also moved the report to Todo tracker, with message:
-> Need new Boolean maintainer!
problems reported by klockwork.com who was very nice and has offered to
provide free source code analisys for us.
This one deals with freeing memory for an object when there is an
error. (The function allocated memory intending to return it but
then ran into problems, and was forgetting to free it before it returned
NULL)
Kent
* Add WITH_BF_YAFRAY, which per default is 'true', so no visible changes for developers (and users).
Set WITH_BF_YAFRAY to 'false', and you'll save some major compile time :) Also handy if you're strapped for memory and compilation fails on yafray compilation due
to this.
- this commit also has a few whitespace changes and
- made BF_NO_ELBEEM a proper BoolOption. This will be renamed to WITH_BF_ELBEEM in the near future...
maintenance work:
- added missing files in blenkernel
- updated Bullet in extern
- Python: SurfNurb.c
- removed compile and dependency of PHY_Ode
- made blenderplayer compile again (had to add pthreads lib)
Experimental boolean tool optimization: for very large meshes a significant
amount of time is spend performing linear searches of edges. This patch
implements a "hash" table (really more of a bucket table) to narrow the
search space.
If someone should need to disable this, just remove the "#define HASH" at
the beginning of BOP_Mesh.h
module itself, replacing the special MEM_mallocT/MEM_freeT functions.
Mutex locking is only enabled when threads are running.
There was no good reason to have these separate, it just led to ugly
hacks when calling functions with non-threadsafe malloc from threads.
of the fluidsim can now be disabled with the
flag: BF_NO_ELBEEM='true', e.g. for irix systems.
(The number of ifdefs from the original
patch was reduced, and the defines are now
only necessary when elbeem is switched off.)
- particle generation option is available again
open the tablet and friends up....
Basically the issue this fixes is this. On my linux machine at
work someone setup a generic xorg.conf file that defines all
kinds of devices (a tablet and other stuff) which are not on my
machine. So blender was exiting when it tried to open the tablet
and failed. Now it doesn't.... :)
I also did some very minor reformatting... (replaced parts that had spaces
with tabs)
Kent
This is 'ported' from Nicholas Bishop's sculpting GSoC tree. I'm bringing it
over now so a) it can be there for when lukep does his GHOST refactor b) it's
something that GHOST should have anyway, particularly now there's interest in
painting tools and c) it's missing support in Windows, so hopefully now some
enterprising Windows coder can add that more easily in the main bf tree.
Right now X11 and Mac OS X are supported. I added and can maintain the Mac OS X
part, but I'm not familiar with the Xinput stuff, which Nicholas wrote. Both
X11 and Mac are collecting active device and pressure, and Mac is also
collecting x and y tilt data. Up to coders how they want to use this info! :)
Although the data's coming in, I haven't actually made this do anything. I
thought it best to leave it to brecht to figure out what he wants to do with the
painting stuff, and I wonder what other interesting uses there could be for it
(proportional edit?). I'll write implementation details in a separate mail to
the committers list.
- patch from Douglas with endian fixes
- Makefile adds static libiconv.a from lib/
- this version will use OpenEXR libs from lib/ too, and is latest release
with threading support
- openAL is missing, added it as default to not include it
- Assert was causing blender to crash on non-manifold meshes with a decimation
modifier. Even in a debug build, there's no reason to crash blender then,
because the modifier handles this ok and displays a warning message.
Part of the problem is NDEBUG not being set in scons/linux for release builds,
but always enabled for makefiles even in debug builds.
"Swaps left and right bytes of small cursors for Carbon on Intel."
This fixes garbled cursors on Intel Mac builds. Tested on my G4 too and it works fine.
Adding back some code to booleans that got lost in the Orange merge.
I've also added back the code which checked that meshes were solid
("manifolds") but have the actual check in
intern/boolop/intern/BOP_Interface.cpp, since from my testing it was
not causing crashes or hangs. It *can* give odd results depending on
what you're trying to intersect, but seems useful. Additionally, since
existing bugs in the current code can create non-solid/non-manifold
meshes, seems hypocritical to create a mesh that can't later be used in
another boolean operation.
Previous patch for "problems with STL iterators/vectors that only show up under
Visual Studio 2005" could cause a crash when object used as a boolean modifier
was changed (for example, flipping all the normals). The problem is that result
of boolean operations (apparently) can result in empty meshes. Patched to
use the vector::size operator to check for empty vectors before trying to
check the iterator.
Bug "fix" for #3932, and possibly for #3799. Booleans can get into an endless loop (at least until memory runs out); through triangulation somehow a face is repeatedly added to the list of faces to triangulate. This patch checks the face list for duplicates prior to a list add and aborts if a dup is found.
The real issue is why the triangulation is creating the face in the first place, but that will take a more thorough (and longer) examination of the code. If I can fix that issue that prior to the 2.42 release, then this code can be removed.
Used F11 and friends for its special keys Stop,again etc..
So this little patch enables F11 and F12 to work as expected
following link has documentation on it:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4734408
also from /usr/include/X11/Sunkeysym.h
#define SunXK_F36 0x1005FF10 // Labeled F11
#define SunXK_F37 0x1005FF11 // Labeled F12
I also added a comment explaning why the heck its there...
What this means is XK_F11 and XK_F12 do not line up with the F11 and F12
keys on sun keyboards. So I've added special cases to correct the issue.
Doing a quick grep for XK_F shows there are some files in the
gameengine that use them when they probably shouldn't, but I'm not going to
attempt to fix them, Files that should be looked at are:
gameengine/BlenderRoutines/KX_BlenderInputDevice.h
gameengine/Converter/KX_ConvertSensors.cpp
gameengine/GameLogic/SCA_IInputDevice.h
gameengine/GamePlayer/common/unix/GPU_KeyboardDevice.cpp
gameengine/GamePlayer/common/windows/GPW_KeyboardDevice.cpp
gameengine/GamePlayer/ghost/GPG_KeyboardDevice.cpp
gameengine/Ketsji/KX_PythonInit.cpp
Kent
This should bring the projectfiles upto date for msvc7.
Moving these to version 7.1 so that the version 8 people don't have such a hard time importing into 2005.
Build intern.sln, extern.sln and then blender.sln. Enjoy. :p
variable blah at a higher scope is already defined...
(one of these was introduced by me when I moved a variable declaration
to the top of the function.)
Kent
Try to get the yy_wrap and yy_parse definitions for IRIX. Hoping
that it will also help Kent's multiply resolved warnings, I've done
this so that these symbols are defined only if they are currently
undefined. I'm not sure if it will work though, please test!
BOP_Mesh.h:45: warning: ‘class BOP_Mesh’ only defines private constructors and h
as no friends
drawimasel.c initalized a variable so it didn't give warnings about it.
(wasn't really needed but if the code changes could be potential issue)
Kent
- Added part of Austin's msvc8 fixes (vector::erase function
was "misused"), hopefully compiles better now.
- Ctrl-b now also bakes a selected fluidsim domain
similar to the softbodies.
- Added surface smoothing option for domains: default is
1, higher values result in a smoother surface (and probably
slightly higher comupation times), while 0 means the surface
is not modified at all.
- Added BLENDER_ELBEEMBOBJABORT environment variable in readBobj,
if >0 quits blender when a not yet existing fluidsim
frame should be loaded. Useful for rendering simulations
as far as possible from the command line.
- Surface normals pointer is now set to NULL in readfile.c
- Fixed win32 error string handling, now uses a function
to return the string from the solver.
- Fixed fluidsim particle halo scaling problem.
- Solver update
a string as an int and it was causing a warning.
I changed it to check to see if the string == 0
return 0 else return 1.
The only thing that called this function was memtest.c and it
had outdated code, so I fixed that...
was calling MEM_set_error_stream updated to
MEM_set_error_callback
Kent
* These changes bring cross-compiling Blender for Windows on Linux one step
closer to reality. The 'biggest' change is in makesdna SConscript to make
sure a linux native makesdna is built, that can be run, too. Next to that
proper checks for env['OURPLATFORM']=='linuxcross' are added in various
places.
Switch change in pluginapi.c was necessary, and AFAIK it should work like
that also on WIN32, if not, slap me.
Note: everything *compiles* now nicely, it is just that the final *linking*
doesn't work (yet). Anyone who fixes this will be the
hero of cross-compilers :)
no GE right now ( need to adapt to erwins file reshuffle
so may be i wait a bit until he has his mind made up )
elbeem is running when you remove the extra std:: at some places
well the msvc6 preprocessor is not very smart
--> std:: is not a member of std:: :)
so i guess there is a "using namespace std" somewhere
issues in parallel... So this commit contains: an update of
the solver (e.g. moving objects), integration of blender IPOs,
improved rendering (motion blur, smoothed normals) and a first particle
test. In more detail:
Solver update:
- Moving objects using a relatively simple model, and not yet fully optimized - ok
for box falling into water, water in a moving glass might cause trouble. Simulation
times are influenced by overall no. of triangles of the mesh, scaling meshes up a lot
might also cause slowdowns.
- Additional obstacle settings: noslip (as before), free slip (move along wall freely)
and part slip (mix of both).
- Obstacle settings also added for domain boundaries now, the six walls of the domain are
obstacles after all as well
- Got rid of templates, should make compiling for e.g. macs more convenient,
for linux there's not much difference. Finally got rid of parser (and some other code
parts), the simulation now uses the internal API to transfer data.
- Some unnecessary file were removed, the GUI now needs 3 settings buttons...
This should still be changed (maybe by adding a new panel for domain objects).
IPOs:
- Animated params: viscosity, time and gravity for domains. In contrast
to normal time IPO for Blender objects, the fluidsim one scales the time
step size - so a constant 1 has no effect, values towards 0 slow it down,
larger ones speed the simulation up (-> longer time steps, more compuations).
The viscosity IPO is also only a factor for the selected viscosity (again, 1=no effect).
- For objects that are enabled for fluidsim, a new IPO type shows up. Inflow
objects can use the velocity channels to animate the inflow. Obstacles, in/outflow
objects can be switched on (Active IPO>0) and off (<0) during the simulation.
- Movement, rotation and scaling of those 3 types is exported from the normal
Blender channels (Loc,dLoc,etc.).
Particles:
- This is still experimental, so it might be deactivated for a
release... It should at some point be used to model smaller splashes,
depending on the the realworld size and the particle generation
settings particles are generated during simulation (stored in _particles_X.gz
files).
- These are loaded by enabling the particle field for an arbitrary object,
which should be given a halo material. For each frame, similar to the mesh
loading, the particle system them loads the simulated particle positions.
- For rendering, I "abused" the part->rt field - I couldnt find any use
for it in the code and it seems to work fine. The fluidsim particles
store their size there.
Rendering:
- The fluidims particles use scaled sizes and alpha values to give a more varied
appearance. In convertblender.c fluidsim particle systems use the p->rt field
to scale up the size and down the alpha of "smaller particles". Setting the
influence fields in the fluidims settings to 0 gives equally sized particles
with same alpha everywhere. Higher values cause larger differences.
- Smoothed normals: for unmodified fluid meshes (e.g. no subdivision) the normals
computed by the solver are used. This is basically done by switching off the
normal recalculation in convertblender.c (the function calc_fluidsimnormals
handles other mesh inits instead of calc_vertexnormals).
This could also be used to e.g. modify mesh normals in a modifier...
- Another change is that fluidsim meshes load the velocities computed
during the simulation for image based motion blur. This is inited in
load_fluidsimspeedvectors for the vector pass (they're loaded during the
normal load in DerivedMesh readBobjgz). Generation and loading can be switched
off in the settings. Vector pass currently loads the fluidism meshes 3 times,
so this should still be optimized.
Examples:
- smoothed normals versus normals from subdividing once:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_1smoothnorms.pnghttp://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_2subdivnorms.png
- fluidsim particles, size/alpha influence 0:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_3particlesnorm.png
size influence 1:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_4particlessize.png
size & alpha influence 1:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/v060227_5particlesalpha.png
- the standard drop with motion blur and particles:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t2new.mpg
(here's how it looks without
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t1old.mpg)
- another inflow animation (moving, switched on/off) with a moving obstacle
(and strong mblur :)
http://www10.informatik.uni-erlangen.de/~sinithue/temp/elbeemupdate_t3ipos.mpg
Things still to fix:
- rotating & scaling domains causes wrong speed vectors
- get rid of SDL code for threading, use pthreads as well?
- update wiki documentation
- cool effects for rendering would be photon maps for caustics,
and motion blur for particles :)
+ the code in writemovie.c no longer compiles (since the renderer
refactor). I have #if 0-ed it.
+ OpenGL on Irix doesn't have GL_ARB_vertex_program
+ mmap on Irix doesn't like MAP_ANON.
+ If using the MipsPro 7.3 compiler, the variable MIPS73_ISOHEADERS
can be set to point to the directory with those weird C++ headers
that don't have .h in the name
In Orange we've been fighting the past weeks with memory usage a lot...
at the moment incredible huge scenes are being rendered, with multiple
layers and all compositing, stressing limits of memory a lot.
I had hoped that less frequently used blocks would be swapped away
nicely, so fragmented memory could survive. Unfortunately (in OSX) the
malloc range is limited to 2 GB only (upped half of address space).
Other OS's have a limit too, but typically larger afaik.
Now here's mmap to the rescue! It has a very nice feature to map to
a virtual (non existing) file, allowing to allocate disk-mapped memory
on the fly. For as long there's real memory it works nearly as fast as
a regular malloc, and when you go to the swap boundary, it knows nicely
what to swap first.
The upcoming commit will use mmap for all large memory blocks, like
the composit stack, render layers, lamp buffers and images. Tested here
on my 1 GB system, and compositing huge images with a total of 2.5 gig
still works acceptable here. :)
http://www.blender.org/bf/memory.jpg
This is a silly composit test, using 64 MB images with a load of nodes.
Check the header print... the (2323.33M) is the mmap disk-cache in use.
BTW: note that is still limited to the virtual address space of 4 GB.
The new call is:
MEM_mapalloc()
Per definition, mmap() returns zero'ed memory, so a calloc isn't required.
For Windows there's no mmap() available, but I'm pretty sure there's an
equivalent. Windows gurus here are invited to insert that here in code! At
the moment it's nicely ifdeffed, so for Windows the mmap defaults to a
regular alloc.
+ 'scons blenderplayer' builds blender AND blenderplayer now (tested on Linux
only, but was only linking issue, so should work on other platforms too).
NOTE: I noticed some compileflags for GE specific libs that were left out -
I re-enabled them in the SConscripts, but I'm going to do a test build my-
self now, so if there are problems with them on win32, I probably already
know about them :)
+ BF_BUILDINFO=1 (by default) for build info in splash
- remove redundant renderconverter include dir
* check for win32-vc instead of only win32, so MingW compile goes ok
* This commit is all of the rewrite work done on the SCons system. For
documentation see doc/blender-scons.txt and doc/blender-scons-dev.txt.
Also http://mediawiki.blender.org/index.php/BlenderDev/SconsRefactoring
contains valuable information, along with what still needs to be done.
- linux, os x and windows compile now.
- files are compiled to BF_INSTALLDIR (see config/(platform)-config.py)
- NOTE: Jean-Luc P will commit sometime during the weekend proper
appit() for OS X. For now, copy the resulting binary to an
existing .app bundle.
- features:
- cleaner structure for better maintenance
- cleaner output during compile
- better handling of build options
- general overall speed increase
- see the wiki for more info
Cygwin, FreeBSD and Solaris systems still need work. For these systems:
1) copy a config/(platform)-config.py to ie. config/cygwin-config.py
2) set the proper defaults for your platform
3) mail me at jesterking at letwory dot net with you configuration. if
you need any modifications to the system, do send a patch, too.
I'll be giving first-aid today and tomorrow, after that it'll be all
regular development work :)
/Nathan
extern/bullet/BulletDynamics/ConstraintSolver/SimpleConstraintSolver.h
added newline at end of file.
intern/boolop/intern/BOP_Face2Face.cpp
fixed indentation and had nested declarations of a varible i used
for multiple for loops, changed it to just one declaration.
source/blender/blenkernel/bad_level_call_stubs/stubs.c
added prototypes and a couple other fixes.
source/blender/include/BDR_drawobject.h
source/blender/include/BSE_node.h
source/blender/include/butspace.h
source/blender/render/extern/include/RE_shader_ext.h
added struct definitions
source/blender/src/editmesh_mods.c
source/gameengine/Ketsji/KX_BlenderMaterial.cpp
source/gameengine/Ketsji/KX_ConvertPhysicsObjects.cpp
source/gameengine/Ketsji/KX_RaySensor.cpp
removed unused variables;
source/gameengine/GameLogic/Joystick/SCA_Joystick.cpp
changed format of case statements to avoid warnings in gcc.
Kent
here is a quick summary...
Kent
intern/bsp/intern/BSP_CSGMesh_CFIterator.h
removed tri_index (unused variable)
intern/bsp/intern/CSG_BooleanOps.cpp
removed extra ;
intern/string/intern/STR_String.cpp
added <ctype.h>
source/blender/blenkernel/BKE_writeavi.h
moved things around so not doing forward declarations
source/blender/renderconverter/intern/convertBlenderScene.c
changed render.h to render_types.h
source/blender/src/blenderbuttons.c
source/blender/src/editgroup.c
source/blender/src/meshtools.c
added newline
source/gameengine/Ketsji/KX_KetsjiEngine.cpp
commented out include "PIL_time.h" code that requires it is commented out
reading blender/src/writeavicodec.c
(struct keyword to a couple of lines that needed it)
and added:
extern struct Render R;
blender/renderconverter/intern/convertBlenderScene.c
added extern Render R;
added #include "rendercore.h" to get rid of undeclared shade_material_loop
(Not sure if this is right but it fixes it.
Did not fix this problem, is it alright to just pass NULL here or should we chan
ge it to something else:
init_render_materials' : too few
gameengine/Physics/BlOde/OdePhysicsEnvironment.cpp
removed argument to dHashSpaceCreate
commented out dWorldQuickStep since it does not exist
NOTE to Ton and Hos
PLEASE do not try to merge any ot the MSVC6 project files (*.dsw ,*dsp)
I have a plan to get it done with a minimum of pain
thanks
ole
These should make it so that other people can compile with OpenEXR support.
(I also added the OPENAL fix erwin commited to bf-blender since I
need it for my machine, and this syncs up the file)
Kent
- There is now a (temporary) dropdown box in the image window header for
switching between the old an new unwrapper code. So to test the changes
described below you need to enable the new unwrapper code.
- Pinning is now more predictable, if one uv is pinned, the others belonging
to the same vertex are pinned also.
- Live LSCM is much faster, since the LU factorization, the most expensive
part of the computation, is now stored and reused (was Jens' idea).
- Packing multiple uv charts is slightly improved, by doing a binary search
over the texture width. This fixes the case where all the charts are
packed at the bottom of the image.
- LSCM now uses an angle based formulation, and the results seem somewhat
different (maybe slightly better?), didn't find out why yet.
This commit adds new underlying uv unwrapper code, intended to be
more extensible. At the moment this has a re-implementation of LSCM.
This has not been activated yet, since it doesn't add anything new.
What's new is the stretch minimize tool from tuhopuu. It works by
selecting some some uv's in the uv editor window, and then pressing
ctrl+V. The uv's on the boundary stay fixed.
More stuff will follow as I port it over & fix it.
and viscosity, an example can be found here:
http://www10.informatik.uni-erlangen.de/~sinithue/temp/fluid_timeanim.mpg
- for simulation time animation the time IPO of the object is currently used,
for all three there should probably be new ipos in the fluidsim struct
- started the API in elbeem.cpp, to get rid of parser & export
via HD (it's not yet used)
It appears that removing the 'int level' field from the
MemHead struct caused alignment issues for gcc builds of blender
on Irix (zr, who removed this field, commented that this problem
might occur, and sure enough it did happen). I've renamed the
field from 'level' to 'pad' to reflect that it has no meaning
beyond addressing alignment issues.
post build step for booleans --> copy boolop.lib to lib folder _foo_/lib/windows..
enabeling bullet for GE
wants to link with _foo_/lib/windows/bullet/lib/bullet3.lib
you have to build it with continuous.dsw in exten/bullet and copy it manually there
since bullet is exten i think no automagic in place here
On this subject (and thanks to GSR for research) on debian the
values.h has the following warning:
/* This interface is obsolete. New programs should use
<limits.h> and/or <float.h> instead of <values.h>. */
Should values.h be used at all?
so there will be more files following.
Anyway: NEW BOOLEANS from Google Summer of Code (Courtesy of Marc Freixas)
Known problems:
- Random freezes while using them as a modifier. This may not be directly
related to modifiers though - it's maybe just the huge number of
operations that leads to a higher probability of triggering a bug
- Static booleans (the first 3 entries in the WKEY menu) are borked
anyway, this is not due to this commit.
- Errors when exiting Blender (dupli_alloc stuff), is not related to this
commit, either.
Please test if everything works, and check the other build systems, I only
know that make works.
Also, compare the results of, say, cube-cylinder, in old and new booleans
:)
with a single file again (intern/elbeem/intern/solver_main.cpp
includes intern/elbeem/intern/solver_init.cpp and
intern/elbeem/intern/solver_util.cpp when __APPLE_CC__ is defined)
- minor cleanup of inlined functions
added #include <ieeefp.h> similar to where its included in
other files. (made an ifdef that matches other includes of the same
file)
solaris does a lot of type overloading so there is no expf its just exp
so I added a #define expf exp wrapped in an ifndef
Finally, I fixed a warning in cfglexer.cpp about multiply defined
yy_wrap functions.
Kent
in this case only the new blenderdummy.cpp and utilities.cpp have to be compiled
- restructured gui:
* domain options split up into 2 sections
* added compressibility and refinement settings
* added inflow/outflow object types
- increased progress bar by 1
added msvc6 project file for builing elbeem
NOTE: it won't build unless some spots in elbeem code are cangend
see -->
fixing elbeem to build on msvc6
http://projects.blender.org/pipermail/bf-committers/2005-September/011952.html
[quote]
And no.. i won't set up a msvc6 project for building blender_elbeem.lib
until things calmed down a bit.
[/quote]
well i did for me to continue work, why not share.
if you do *rebuild all* in this project (release mode) on success will do a
post build step which will copy blender_elbeem.lib to the lib/windows..blah folder
such that the msvc6 (blender) project will find it for happy linking.
it even #defines MSVC6 so all the above changes could be nicly hidden behind that
( my local tree does so ) but it is on Nils to decide if he wants his code to be *pested*.
- debug output now controlled globally by elbeem debug level
(BLENDER_ELBEEMDEBUG environment var), also for fluidsimBake
and read/writeBobj
- debug output is written to file for WIN32
- added "for" and "vector" etc. defines for MSVC6
(I couldnt get hold of the compiler itself, so not tested yet)
(fixed shadowed variables warnings, removed cfgparser.hpp,
added cfgparser.h, removed debugging output)
- added support for env. var BLENDER_ELBEEMDEBUG to enable
debugging output again
- fixed missing triangle display (marching cubes produced v3=0 triangles)
- fixed geometry init bug (nearest intersection check
for intersecting objects was messed up)
- changed position of derived mesh creation in DerivedMesh.c
(for some reason the useDeform code is necessary, without it or
with useDeform=0 nothing is displayed)
- 3dviews now update every 2 seconds to show simulation progress
- note: mesh_strip_loose_faces(me); in ./source/blender/blenkernel/intern/mesh.c:937
not necessary anymore?
IK: needed to change abs() to TNT::abs() (thanks brecht!)
Freetype: FT_ENCODING_UNICODE typecast to FT_CharMap (thanks intrr!)
header_image: missing include for liballoc stuff
Ketsji: needed to declare m_hitObject as public in KX_MouseFocusSensor.h.
This is probably the wrong thing to do, but KX_MouseFocusSensor.cpp
compilation fails on line 279 otherwise.
module -- the previous method could be off pretty far.
- Added drawing of transparent surface for it, instead of just the border.
- Added "stretch IK", allowing bones not only to rotate, but also scale.
The "Stretch" value below the DoF buttons is used to enabled this.
- Some code tweaking: slightly simplified computation of transform for IK,
renamed chain to tree, removed unused pchan->ik_mat, ..
Internal IK module work:
- Do damping per DoF also based on stiffness, hopefully makes it converge
faster with very stiff joints.
- Instead of having two joints types (translational and rotational), now
all 6 DoF's can be enabled for one joint.
- Added limits for translational joints.
- Z-axis rotation limits were not working, was using wrong flag.
- Don't allow min limit to go over max, or vice versa.
- Fix for jacobian getting overwritten with IK clamping.
Fix some warnings.
Merge with latest soc code.
What changed in IK lib:
Fully restructured, with components now as follows:
- IK_Solver: C <=> C++ interface
- IK_QSegment: base class for bone/segment with 0
to 3 DOF
- IK_QTask: base class for a task (currently there's
a position and a rotation task)
- IK_QJacobian: the Jacobian matrix, with SVD
decomposition, damping, etc
- IK_QJacobianSolver: the iterative solver
The exponential map parametrization is no longer used,
instead we have now:
- 3DOF and 2DOF XZ segments: directly update matrix
with Rodrigues' formula
- Other: Euler angles (no worries about singularities
here)
Computation of the Jacobian inverse has also changed:
- The SVD algorithm is now based on LAPACK code,
instead of NR, to avoid some problems with rounding
errors.
- When the problem is underconstrained (as is the case
most of the time), the SVD is computed for the transpose
of the Jacobian (faster).
- A new damping algorithm called the Selectively Damped
Least Squares is used, result in faster and more
stable convergence.
- Stiffness is implemented as if a weighted psuedo-inverse
was used.
Tree structure support.
Rotation limits:
- 3DOF and 2DOF XZ segments limits are based on a swing
(direct axis-angle over XZ) and twist/roll (rotation
over Y) decomposition. The swing region is an ellipse
on a sphere.
- Rotation limits are implemented using an inner clamping
loop: as long as there is a violation, a violating DOF
is clamped and removed from the Jacobian, and the solution
is recomputed.
Convergence checking is based now on the max norm of angle
change, or the maximum number of iterations.
64 bits systems... weird bug. :)
It now only does a unit-of-4 check, for all systems. This will work fine,
since the malloc code will return aligned anyway, and the guarded alloc
system only stores ints in the headers. Also, the sizeof() call will
correctly do padding, so there's no risk of allocating too small blocks.
- XCode project
- Scons :
scons stopped working for Os X in the last month (dont know when) :
* the '.' and '..' keywords in CCPPATH
are not recognized anymore for sconscripts compiling files at
a sub level
* when doing a scons clean, the 3 subdirs in build dir are removed
and scons then fail to recreate them (exten, intern, source)
this commit solve the first problem as a temp workaround
for the latter simply recreate the dirs manually
I will investigate that further when on vacations, which i should already
be.
;(
all 3 build systems are now working on Os X
errors, switched MEM_set_error_stream to MEM_set_error_callback
that calls a function to print result instead of just giving
a FILE *
Note: requires intern recompile
Code provided by Matthew Plough. Verified to run OK in OSX, Windows.
Solves bug #2598, which crashed blender on using non-manifold meshes with
decimator.
source/creator/creator.c
changed ifdef's around fpe_handler to match when its actually used.
intern/SoundSystem/intern/SND_AudioDevice.cpp
Changed: SND_SoundObject* oldobject = oldobject = pIdObject->GetSoundObject();
to: SND_SoundObject* oldobject = pIdObject->GetSoundObject();
intern/SoundSystem/openal/SND_OpenALDevice.cpp
removed unused var.
source/blender/blenkernel/intern/mball.c
initalized a couple of vars that might have been used uninitalized.
The rest were changing types to match, most of them were something like
was short * should have been unsigned short *.
Kent
Added the is_a_really_crappy_nvidia_card() call in BMF_DrawString(), this
to solve a bug in NVidia 6800 drivers of MacOSX G5. It is #ifdeffed for
OSX only, and queries for a NVidia 6800 card to activate the patch.
The issue is that these drivers forgot to correctly implement viewport()
offset for drawing bitmap fonts, causing text display in Blender to be
invisible, except for the leftmost/bottom sub window.
This hack will be removed when Apple releases a driver upgrade, which is
unknown when to happen. Has to be decided still if this is worth for a
release, or that we provide the hack as separate download.
Thanks Randall Rickert for all testing, and Daniel for code review! :)
I got rid of a few warnings about blah shadows a previous declaration.
In the gameengine files I fix the following:
removed some unused vars
removed dos style line breaks
added newlines to last line in a couple of files to remove warnings.
Kent
- Added correct .libs to be linked to GP_Ghost
- Fixed incorrect library extensions for the linker (*.lib and not unix *.a)
- Projects have been set to be multi-threaded - projects were being linked to different versions of the CRT
- All projects are now linking to python 2.3 (this fixes an error regarding struct sizes in python)
- Removed invalid source paths from inclusion for the compiler
- Fix dependency issues with the GP_Ghost module
- Proper .dll's are now being copied to their respective locations for debug and release version of blender/blenderplayer
- Warnings have been set to level 2
- Import paths have been updated and organized for the compiler
- Duplicate import paths for the compiler have been removed
- Removed silly silly silly silly unix path-separators from window paths
- Post-Build scripts have been updated where neccessary (XCOPY is retatined)
- Fixed the output of various .lib files (PHY_Sumo and Yafray)
- PHY_Sumo now uses a .pch
- Removed #undef _DEBUG from debug builds :p
- FTF_Font is now contains a debug build and is being set to it's correct output path
- Blender/Blenderplayer/3DPlugin all linkto Debug libs where appropriate (instead of static release libs to avoid conflicts with the CRT)
- Python23_d.dll is now loaded into a true debug output of both blenderplayer and blender debug builds
- msvcrtd.dll is now loaded into a true debug output of both blenderplayer and blender debug builds
- Post-builds now clean up their mess
- ActiveX controller now builds
- BlenderPlayer now builds
- Internal libs now using .pch
- Moved the build directory from /blender/obj to ../build/msvc_7/ to follow precedence with scons builds
- Builds are now organized to follow precedence with scons builds with a /libs and a /intern /extern /source obj folders
- Set the proper build path for opennl
- Forcing BLO_loader source files to follow project defaults
- Added an 'extern' project that mimics the /make build of the 'intern' project
- Extern build includes solid and it's associated builds, ftgl, and freetype
- Added .vcproj files to /extern directory
- Added new extern.sln file to /extern directory
- All project now link to the built solid.lib from the extern project instead of lib/windows
- Removed uneeded XCOPYs commands from post-builds
- Added conditional Directory building to post-builds
- Freetype2 source commit (this is need for the building of a correct MFC linked version of the activeX controller as well as a correct release and debug build of the blender project)
- Ftgl is built and linked by the 'extern' project
- Intern/Extern project are now exporting their proper header files
- PHY_Physics is now linking to the correct set of header files (in build path not source)
- Makesdna builds object files into build directory now
- Projects are now ignoring the CORRECT versions of the CRT's :)
- Renderconverter is now outputting it's obj file to it's own directory instead of /render
- Gen_system is now being built to ../kernel
- BL_src_cre is now being built to /creator
- *.exp and *.ilk are now being cleaned up from linkers
- Libpng.dll and zlib.dll are now being copied to the /bin
- MTDLL build are now available for the correct projects
- ActiveX 3D Plugin now links correctly to solid and freetype2
- Corrected the Preprocessor #define that was labeled incorrectly in FTF_Font and Blender that was causing the FTGL libs to export dll calling conventions.
- Changed the solution configurations to 3D Plugin Release, Debug and Blender Release, Debug for internal and external librarys
- Changed the solution configurations to 3D Plugin Release, Debug and Blender Release, Debug for blender and added 2 new solutions configurations BlenderPlayer Release, Debug
-
- set build_install_all as the default project (if you give me a quarter ill tell you how :)
- set SoundSystem to it's proper dependencies
- updated those silly silly unix path separators
- set project warning levels to something not so noisy
It will attempt to break into the debugger instead of aborting the program. On Windows you have a nice MessageBox function, so you can choose to break, ignore, or permanently ignore the assert.
Floating point imprecision made MT_Quaternion::angle return NaN, since acos(x) is NaN for |x| > 1.
Because of the way NaN's propagate through float math, the view pos would be set to [NaN, NaN, NaN] resulting in a grey screen.
behaves very unpredictable (ask google) and seems to clear pending events
as well (fly mode, shift event dissappears).
The now used call, CGWarpMouseCursorPosition, creates no event so it has
to be combined with updating mouse cursor location in ghostwinlay.c
under linux / x11 / KDE.
The new behaviour in 2.34, not recreating the render window on re-render,
revealed that raising windows did not work under some window managers. Now the
"net wm extensions" are used if available, otherwise it will work the same way
as before (e.g. Gtk+ does this as well).
More info:
http://www.freedesktop.org/Standards/wm-spec
Caught from the following warning:
In file included from IK_QChain.h:47,
from IK_QChain.cpp:44:
TNT/cmat.h: In function `void TNT::matmultdiag(TNT::Matrix<T>&, const TNT::Matri
x<T>&, const TNT::Vector<T>&)':
TNT/cmat.h:593: warning: left-hand operand of comma has no effect
Kent
those who work with visible dock where experimenting slowdown of UI when
blender window was overlapping dock.
now :
- check available space excluding dock
- create window with a 10 pixels border
- maximised mode is only 1 click away
This code is fixing only. Will review that when consensus will be found
about how we should create the window.
if video card is open GL accelerated and has 16 Mo or more
start window in maximized mode wich is a full screen mode
but keeping access to other windows and sytem menu items
older comps start as usual