## Description
Issue described in #460
## Changes
- Edited `supervisord.conf` to exit if it detects any of the supervisored processes exiting.
- minor text fix
## Notes
Without this change (or something similar), if act_runner fails, then the container will stay up as a zombie container - it does nothing and does not restart. After this change, if act_runner fails (e.g. due to Gitea instance being down), then supervisord will exit and the container will be restarted.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/462
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: davidfrickert <david.frickert@protonmail.com>
Co-committed-by: davidfrickert <david.frickert@protonmail.com>
Added environment variable `RUNNER_STATE_FILE` to let users specify
where `run.sh` looks for the runner JSON file. Defaults to ``.runner``
to preserve the original behavior.
Addresses issue #368. It's not my preferred solution but it's the least invasive one I can think of.
I'm happy to make any changes you want.
I didn't see an appropriate place to reference the change in the documentation. I will add documentation wherever you think is appropriate.
To test this I did the following:
* Built an image with the `make docker` command and pushed it to my private registry.
* Added that private image as the image in my existing docker stack that was exhibiting the behavior described in #368.
* Added the RUNNER_STATE_FILE environment variable pointing to the runner JSON file set in my `config.yml` (``/data/runner.json`` in this case).
* Configured a new runner in gitea and added the token as an environment variable in the stack config.
* Deployed the stack and verified the new runner was recognized (in the idle state).
* Force updated the runner service to restart the container.
* Verified the same runner was still recognized in gitea (in the idle state) once it was back up and running.
Here is the relevant config. It's stored as a template so I've left the things that would normally be redacted as they are in the template.
```
runner:
image: hub.hax.in.net/haxwithaxe/act_runner:dev1
networks:
- swarm-net
environment:
RUNNER_STATE_FILE: /data/runner.json
CONFIG_FILE: /data/config.yml
GITEA_INSTANCE_URL: "https://git_gitea"
GITEA_RUNNER_REGISTRATION_TOKEN: "{{ git_runner_reg_token }}"
GITEA_RUNNER_NAME: "git_runner"
volumes:
- runner_data:/data
- /var/run/docker.sock:/var/run/docker.sock
```
`runner_data` is a glusterfs subvolume
Thanks for creating this gitea specific fork. Apart from the issue this pull request addresses it works so well I don't have to think about it once it's set up.
Co-authored-by: haxwithaxe <spam@haxwithaxe.net>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/377
Co-authored-by: haxwithaxe <haxwithaxe@noreply.gitea.com>
Co-committed-by: haxwithaxe <haxwithaxe@noreply.gitea.com>
Without this, actions fail when attempting to clone the repo:
```
2023-07-18 17:11:02 [Smoke Test/Run basic test suite] failed to attach to exec: http: invalid Host header
```
This appears to be the same as https://github.com/nektos/act/issues/1908, and only shows up with golang 1.20.6. Staying with golang 1.20.5 is a temporary solution to avoid the bug until it is fixed upstream.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/295
Co-authored-by: Thomas E Lackey <telackey@bozemanpass.com>
Co-committed-by: Thomas E Lackey <telackey@bozemanpass.com>
- Removed `deadcode`, `structcheck`, and `varcheck` linters from `.golangci.yml`
- Fixed a typo in a comment in `daemon.go`
- Renamed `defaultActionsUrl` to `defaultActionsURL` in `exec.go`
- Removed unnecessary else clause in `exec.go` and `runner.go`
- Simplified variable initialization in `exec.go`
- Changed function name from `getHttpClient` to `getHTTPClient` in `http.go`
- Removed unnecessary else clause in `labels_test.go`
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/289
Co-authored-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-committed-by: Bo-Yi Wu <appleboy.tw@gmail.com>
This PR
- adds the `cache-server` command so act_runner can run as a cache server. When running as a cache server, act_runner only processes the requests related to cache and does not run jobs.
- adds the `external_server` configuration for cache. If specified, act_runner will use this URL as the ACTIONS_CACHE_URL instead of starting a cache server itself.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/275
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
Follow #242, #244Fixes#258
Users could use `docker_host` configuration to specify which docker daemon will be used by act_runner.
- If `docker_host` is **empty**, act_runner will find an available docker host automatically.
- If `docker_host` is **"-"**, act_runner will find an available docker host automatically, but the docker host won't be mounted to the job containers and service containers.
- If `docker_host` is **not empty or "-"**, the specified docker host will be used. An error will be returned if it doesn't work.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/260
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
Follow #242.
Move `docker.host` to `container.docker_host`.
There are already some options for docker/container in `container`, so developers could get confused about where to add options.
It's breaking, but I think it's OK since `docker.host` was added just two days ago.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/244
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
- Import "path", "runtime", "strconv", and "strings" packages in daemon.go
- Move "Starting runner daemon" log message to a different location
- Refactor log formatter initialization and add debug level caller information
- Split Config struct into separate Log, Runner, Cache, and Container structs with comments in config.go
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/225
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-committed-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Close https://gitea.com/gitea/act_runner/issues/177
Related https://gitea.com/gitea/act/pulls/56
### ⚠️ Breaking
The `container.network_mode` is a deprecated configuration item. It may be removed after Gitea 1.20 released.
Previously, if the value of `container.network_mode` is `bridge`, it means that `act_runner` will create a new network for job.But `bridge` is easily confused with the bridge network created by Docker by default.
We recommand that using `container.network` to specify the network to which containers created by `act_runner` connect.
### 🆕 container.network
The configuration file of `act_runner` add a new item of `contianer.network`.
In `config.example.yaml`:
```yaml
container:
# Specifies the network to which the container will connect.
# Could be host, bridge or the name of a custom network.
# If it's empty, act_runner will create a network automatically.
network: ""
```
As the comment in the example above says, the purpose of the `container.network` is specifying the network to which containers created by `act_runner` will connect.
`container.network` accepts the following valid values:
- `host`: All of containers (including job containers and service contianers) created by `act_runner` will be connected to the network named `host` which is created automatically by Docker. Containers will share the host’s network stack and all interfaces from the host will be available to these containers.
- `bridge`: It is similar to `host`. All of containers created by `act_runner` will be connected to the network named `bridge` which is created automatically by Docker. All containers connected to the `bridge` (Perhaps there are containers that are not created by `act_runner`) are allowed to communicate with each other, while providing isolation from containers which are not connected to that `bridge` network.
- `<custom_network>`: Please make sure that the `<custom_network>` network already exists firstly (`act_runner` does not detect whether the specified network exists currently. If not exists yet, will return error in the stage of `docker create`). All of containers created by `act_runner` will be connected to `<custom_network>`. After the job is executed, containers are removed and automatically disconnected from the `<custom_network>`.
- empty: `act_runner` will create a new network for each job container and their service containers (if defined in workflow). So each job container and their service containers share a network environment, but are isolated from others container and the Docker host. Of course, these networks created by `act_runner` will be removed at last.
### Others
- If you do not have special needs, we highly recommend that setting `container.network` to empty string (and do not use `container.network_mode` any more). Because the containers created by `act_runner` will connect to the networks that are created by itself. This point will provide better isolation.
- If you set `contianer.network` to empty string or `<custom_network>`, we can be access to service containers by `<service-id>:<port>` in the steps of job. Because we added an alias to the service container when connecting to the network.
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/184
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
Fixes#145
At present, the working directory of a work flow is a path like `/<owner>/<repo>`, so the directory may conflict with system directory like `/usr/bin`. We need to add a parent directory for the working directory.
In this PR, the parent directory is `/workspace` by default and users could configure it by the `workdir_parent` option.
This change doesn't affect the host mode because in host mode the working directory will always be in `$HOME/.cache/act/` directory.
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/154
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
### Add secret
```
DOCKERHUB_TOKEN=xxx
```
### Tag
when tag like `v1.0.0`, it will build multi platform docker image `gitea/act_runner:1.0.0` and `gitea/act_runner:latest`, then push to docker hub
### Use
> volume `/data` save `.runner` config file
> volume `/root/.cache` save actcache and actions cache
```sh
docker run -e GITEA_INSTANCE_URL=*** \
-e GITEA_RUNNER_REGISTRATION_TOKEN=*** \
-e GITEA_RUNNER_NAME=*** \
-v /var/run/docker.sock:/var/run/docker.sock \
-v /root/act_runner/data:/data \
-v /root/act_runner/cache:/root/.cache \
gitea/act_runner
```
Test join runners success
Test run action success
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/118
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: seepine <seepine@noreply.gitea.io>
Co-committed-by: seepine <seepine@noreply.gitea.io>
This adds a very simple Dockerfile and run script for running `act_runner` as a container.
It also allows setting `Privileged` and `ContainerOptions` flags via the new config file when spawning task containers. The combination makes it possible to use Docker-in-Docker (which requires `privileged` mode) as well as pass any other options child Docker containers may require.
For example, if Gitea is running in Docker on the same machine, for the `checkout` action to behave as expected from a task container launched by `act_runner`, it might be necessary to map the hostname via something like:
```
container:
network_mode: bridge
privileged: true
options: --add-host=my.gitea.hostname:host-gateway
```
> NOTE: Description updated to reflect latest code.
> NOTE: Description updated to reflect latest code (again).
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/84
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Thomas E Lackey <telackey@bozemanpass.com>
Co-committed-by: Thomas E Lackey <telackey@bozemanpass.com>
Close#21.
Refactor environment variables to configuration file (config.yaml) and registration file (.runner).
The old environment variables are still supported, but warning logs will be printed.
Like:
```text
$ GITEA_DEBUG=true ./act_runner -c config.yaml daemon
INFO[0000] Starting runner daemon
WARN[0000] env GITEA_DEBUG has been ignored because config file is used
$ GITEA_DEBUG=true ./act_runner daemon
INFO[0000] Starting runner daemon
WARN[0000] env GITEA_DEBUG will be deprecated, please use config file instead
```
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/90
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Fix#64 (incompletely).
It's still not ideal. It makes more sense to use the gateway IP address of container network as outbound IP of cache server. However, this requires act to cooperate, some think like:
- act creates the network for new container, and returns the network to runner.
- runner extracts the gateway IP in the network.
- runner uses the gateway IP as outbound IP, and pass it to act as cache server endpoint.
- act It continues to create the container with the created network.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/74
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
The label will follow the format `label[:schema[:args]]`, and the schema will be `host` if it's omitted. So
- `ubuntu:docker://node:18`: Run jobs with label `ubuntu` via docker with image `node:18`
- `ubuntu:host`: Run jobs with label `ubuntu` on the host directly.
- `ubuntu`: Same as `ubuntu:host`.
- `ubuntu:vm:ubuntu-latest`: (Just a example, not Implemented) Run jobs with label `ubuntu` via virtual machine with iso `ubuntu-latest`.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/69
Reviewed-by: Zettat123 <zettat123@noreply.gitea.io>
Reviewed-by: wxiaoguang <wxiaoguang@noreply.gitea.io>
close#42
1. Inject runner version when `make build`
After building, executing command line: `./act_runner -v` or `./act_runner --version`, the version of runner is printed.
2. In `Actions` UI:
3. Set request header in http client interceptor.
Co-authored-by: sillyguodong <gedong_1994@163.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/43
Reviewed-by: delvh <dev.lh@web.de>
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <sillyguodong@noreply.gitea.io>
Co-committed-by: sillyguodong <sillyguodong@noreply.gitea.io>
This PR is to fix the wrong last step duration when job failed like shown in the screenshot.
The reason is because when job failed, `Fire` function did not pass in Time, and `r.state.StoppedAt` is by default set to `0001-01-01 08:05:43 +0805 LMT`, which is later on reported to gitea by `UpdateTask`, which calls `UpdateTaskByState` to update the `task.Stopped`, and `task.Stopped` is used in `FullSteps`, resulting in wrong calcaulation of last step duration.
Co-authored-by: nickname <test@123.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/41
Reviewed-by: Jason Song <i@wolfogre.com>
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: HesterG <hesterg@noreply.gitea.io>
Co-committed-by: HesterG <hesterg@noreply.gitea.io>
If the Workdir field doesn't ends with the filepath seperator,
bad things happen
Fixes#33
Sample for host mode on windows, needs be adjusted for linux e.g. replace pwsh with bash
Also fixes
```yaml
on: push
jobs:
_:
runs-on: self-hosted
steps:
- uses: actions/checkout@v3
with:
path: subdir/action
- uses: ./subdir/action
```
with an action.yml in the same repo
```yaml
runs:
using: composite
steps:
- run: |
echo "Hello World"
shell: pwsh
```
Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/34
Reviewed-by: Jason Song <i@wolfogre.com>
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: ChristopherHX <christopherhx@noreply.gitea.io>
Co-committed-by: ChristopherHX <christopherhx@noreply.gitea.io>
Act runner is a runner for Gitea based on [act](https://gitea.com/gitea/act).
Act runner is a runner for Gitea based on [Gitea fork](https://gitea.com/gitea/act) of [act](https://github.com/nektos/act).
## Prerequisites
## Installation
Docker Engine Community version is required. To install Docker CE, follow the official [install instructions](https://docs.docker.com/engine/install/).
### Prerequisites
## Quickstart
Docker Engine Community version is required for docker mode. To install Docker CE, follow the official [install instructions](https://docs.docker.com/engine/install/).
### Build
### Download pre-built binary
Visit [here](https://dl.gitea.com/act_runner/) and download the right version for your platform.
### Build from source
```bash
make build
```
### Build a docker image
```bash
make docker
```
## Quickstart
Actions are disabled by default, so you need to add the following to the configuration file of your Gitea instance to enable it:
```ini
[actions]
ENABLED=true
```
### Register
```bash
@@ -24,7 +43,7 @@ And you will be asked to input:
1. Gitea instance URL, like `http://192.168.8.8:3000/`. You should use your gitea instance ROOT_URL as the instance argument
and you should not use `localhost` or `127.0.0.1` as instance IP;
2. Runner token, you can get it from `http://192.168.8.8:3000/admin/runners`;
2. Runner token, you can get it from `http://192.168.8.8:3000/admin/actions/runners`;
3. Runner name, you can just leave it blank;
4. Runner labels, you can just leave it blank.
@@ -37,11 +56,11 @@ INFO Enter the Gitea instance URL (for example, https://gitea.com/):
http://192.168.8.8:3000/
INFO Enter the runner token:
fe884e8027dc292970d4e0303fe82b14xxxxxxxx
INFO Enter the runner name (if set empty, use hostname:Test.local):
INFO Enter the runner name (if set empty, use hostname:Test.local):
INFO Enter the runner labels, leave blank to use the default labels (comma-separated, for example, self-hosted,ubuntu-20.04:docker://node:16-bullseye,ubuntu-18.04:docker://node:16-buster):
INFO Enter the runner labels, leave blank to use the default labels (comma-separated, for example, ubuntu-latest:docker://gitea/runner-images:ubuntu-latest):
INFO Registering runner, name=Test.local, instance=http://192.168.8.8:3000/, labels=[ubuntu-latest:docker://node:16-bullseye ubuntu-22.04:docker://node:16-bullseye ubuntu-20.04:docker://node:16-bullseye ubuntu-18.04:docker://node:16-buster].
INFO Registering runner, name=Test.local, instance=http://192.168.8.8:3000/, labels=[ubuntu-latest:docker://gitea/runner-images:ubuntu-latest ubuntu-22.04:docker://gitea/runner-images:ubuntu-22.04 ubuntu-20.04:docker://gitea/runner-images:ubuntu-20.04].
DEBU Successfully pinged the Gitea instance server
INFO Runner registered successfully.
```
@@ -58,4 +77,32 @@ If the registry succeed, it will run immediately. Next time, you could run the r
Welcome to our collection of usage and deployment examples specifically designed for Gitea setups. Whether you're a beginner or an experienced user, you'll find practical resources here that you can directly apply to enhance your Gitea experience. We encourage you to contribute your own insights and knowledge to make this collection even more comprehensive and valuable.
| [`docker`](docker) | This section provides you with scripts and instructions tailored for running containers on a workstation or server where Docker is installed. It simplifies the process of setting up and managing your Gitea deployment using Docker. |
| [`docker-compose`](docker-compose) | In this section, you'll discover examples demonstrating how to utilize docker-compose to efficiently handle your Gitea deployments. It offers a straightforward approach to managing multiple containerized components of your Gitea setup. |
| [`kubernetes`](kubernetes) | If you're utilizing Kubernetes clusters for your infrastructure, this section is specifically designed for you. It presents examples and guidelines for configuring Gitea deployments within Kubernetes clusters, enabling you to leverage the scalability and flexibility of Kubernetes. |
| [`vm`](vm) | This section is dedicated to examples that assist you in setting up Gitea on virtual or physical servers. Whether you're working with virtual machines or physical hardware, you'll find helpful resources to guide you through the deployment process. |
We hope these resources provide you with valuable insights and solutions for your Gitea setup. Feel free to explore, contribute, and adapt these examples to suit your specific requirements.
## Kubernetes Docker in Docker Deployment with `act_runner`
NOTE: Docker in Docker (dind) requires elevated privileges on Kubernetes. The current way to achieve this is to set the pod `SecurityContext` to `privileged`. Keep in mind that this is a potential security issue that has the potential for a malicious application to break out of the container context.
Files in this directory:
- [`dind-docker.yaml`](dind-docker.yaml)
How to create a Deployment and Persistent Volume for Kubernetes to act as a runner. The Docker credentials are re-generated each time the pod connects and does not need to be persisted.
- [`rootless-docker.yaml`](rootless-docker.yaml)
How to create a rootless Deployment and Persistent Volume for Kubernetes to act as a runner. The Docker credentials are re-generated each time the pod connects and does not need to be persisted.
Here is a simple example of how to set up `act_runner` with rootless Docker. It has been created with Debian, but other Linux should work the same way.
Note: This procedure needs a real login shell -- using `sudo su` or other method of accessing the account will fail some of the steps below.
As `root`:
- Create a user to run both `docker` and `act_runner`. In this example, we use a non-privileged account called `rootless`.
After the system restarts, check that the`act_runner` is working and that the runner is connected to Gitea.
````bash
systemctl --user status act_runner
journalctl --user -xeu act_runner
Loaded 30 of 68 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Jason Song
Zettat123
ChristopherHXandlunny
andrewimeson
TheFox0x7
silverwind