# Changes
A big shoutout to @luhahn for all his work in #205 which served as the base for this PR.
## Documentation
- [x] After thinking for some time about it, I still prefer the distinct option (as started in #350), i.e. having a standalone "HA" doc under `docs/ha-setup.md` to not have a very long README (which is already quite long).
Most of the information below should go into it with more details and explanations behind all of the individual components.
## Chart deps
~~- Adds `meilisearch` as a chart dependency for a HA-ready issue indexer. Only works with >= Gitea 1.20~~
~~- Adds `redis` as a chart dependency for a HA-ready session and queue store.~~
- Adds `redis-cluster` as a chart dependency for a HA-ready session and queue store (alternative to `redis`). Only works with >= Gitea 1.19.2.
- Removes `memcached` instead of `redis-cluster`
- Add `postgresql-ha` as default DB dep in favor of `postgres`
## Adds smart HA chart logic
The goal is to set smart config values that result in a HA-ready Gitea deployment if `replicaCount` > 1.
- If `replicaCount` > 1,
- `gitea.config.session.PROVIDER` is automatically set to `redis-cluster`
- `gitea.config.indexer.REPO_INDEXER_ENABLED` is automatically set to `false` unless the value is `elasticsearch` or `meilisearch`
- `redis-cluster` is used for `[queue]` and `[cache]` and `[session]`mode or not
Configuration of external instances of `meilisearch` and `minio` are documented in a new markdown doc.
## Deployment vs Statefulset
Given all the discussions about this lately (#428), I think we could use both.
In the end, we do not have the requirement for a sequential pod scale up/scale down as it would happen in statefulsets.
On the other side, we do not have actual stateless pods as we are attaching a RWX to the deployment.
Yet I think because we do not have a leader-election requirement, spawning the pods as a deployment makes "Rolling Updates" easier and also signals users that there is no "leader election" logic and each pod can just be "destroyed" at anytime without causing interruption.
Hence I think we should be able to switch from a statefulset to a deployment, even in the single-replica case.
This change also brought up a templating/linting issue: the definition of `.Values.gitea.config.server.SSH_LISTEN_PORT` in `ssh-svc.yaml` just "luckily" worked so far due to naming-related lint processing. Due to the change from "statefulset" to "deployment", the processing queue changed and caused a failure complaining about `config.server.SSH_LISTEN_PORT` not being defined yet.
The only way I could see to fix this was to "properly" define the value in `values.yaml` instead of conditionally definining it in `helpers.tpl`. Maybe there's a better way?
## Chart PVC Creation
I've adapted the automated PVC creation from another chart to be able to provide the `storageClassName` as I couldn't get dynamic provisioning for EFS going with the current implementation.
In addition the naming and approach within the Gitea chart for PV creation is a bit unusual and aligning it might be beneficial.
A semi-unrelated change which will result in a breaking change for existing users but this PR includes a lot of breaking changes already, so including another one might not make it much worse...
- New `persistence.mount`: whether to mount an existing PVC (via `persistence.existingClaim`
- New `persistence.create`: whether to create a new PVC
## Testing
As this PR does a lot of things, we need proper testing.
The helm chart can be installed from the Git branch via `helm-git` as follows:
```
helm repo add gitea-charts git+https://gitea.com/gitea/helm-chart@/?ref=deployment
helm install gitea --version 0.0.0
```
It is **highly recommended** to test the chart in a dedicated namespace.
I've tested this myself with both `redis` and `redis-cluster` and it seemed to work fine.
I just did some basic operations though and we should do more niche testing before merging.
Examplary `values.yml` for testing (only needs a valid RWX storage class):
<details>
<summary>values.yaml</summary>
```yml
image:
tag: "dev"
PullPolicy: "Always"
rootless: true
replicaCount: 2
persistence:
enabled: true
accessModes:
- ReadWriteMany
storageClass: FIXME
redis-cluster:
enabled: false
global:
redis:
password: gitea
gitea:
config:
indexer:
ISSUE_INDEXER_ENABLED: true
REPO_INDEXER_ENABLED: false
```
</details>
## Preferred setup
The preferred HA setup with respect to performance and stability might currently be as follows:
- Repos: RWX (e.g. EFS or Azurefiles NFS)
- Issue indexer: Meilisearch (HA)
- Session and cache: Redis Cluster (HA)
- Attachments/Avatars: Minio (HA)
This will result in a ~ 10-pod HA setup overall.
All pods have very low resource requests.
fix#98
Co-authored-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/437
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
### Description of the change
Change env-to-ini prefix and remove custom prefix.
`GITEA` is the default prefix.
### Benefits
Compatibility wit v1.20 (`-p` got removed)
### Possible drawbacks
None
### Additional information
See https://github.com/go-gitea/gitea/pull/25799
Tested with Gitea < 1.20 and >= 1.20
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/464
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
<!--
Before you open the request please review the following guidelines and tips to help it be more easily integrated:
- Describe the scope of your change - i.e. what the change does.
- Describe any known limitations with your change.
- Please run any tests or examples that can exercise your modified code.
Thank you for contributing! We will try to review, test and integrate the change as soon as we can.
-->
### Description of the change
Add documentation how to add custom themes
### Benefits
<!-- What benefits will be realized by the code change? -->
### Possible drawbacks
<!-- Describe any known limitations with your change -->
### Applicable issues
<!-- Enter any applicable Issues here (You can reference an issue using #). Please remove this section if there is no referenced issue. -->
- fixes#301
### Additional information
<!-- If there's anything else that's important and relevant to your pull request, mention that information here. Please remove this section if it remains empty. -->
### Checklist
<!-- [Place an '[X]' (no spaces) in all applicable fields. Please remove unrelated fields.] -->
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
- [x] Breaking changes are documented in the `README.md`
- [x] Templating unittests are added
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/460
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
### Description of the change
- Add ToC to README for easier navigation (and add note to `contributing.md`)
- Fix some heading levels in README
- Put upgrading notes into collapsible blocks
- Format `contributing.md` according to MD rules
- Allow `details` and `summary` elements in README
- Allow for longer headings
### Benefits
Better documentation
### Possible drawbacks
None
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/461
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
Should help users with their move from PG 11 to 15. Thanks again @pi3ch!
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/458
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.com>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
### Description of the change
This should clarify that we more and more rely on unittests for the templating behavior.
### Applicable issues
- fixes#199
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/455
Reviewed-by: pat-s <pat-s@noreply.gitea.com>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.com>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.com>
### Description of the change
This adds a new values object `serviceAccount`, that allows creating a dedicated ServiceAccount with the Helm Release into the cluster. It supports all common options like labels, annotations, name override (or referring to an externally created ServiceAccount), auto-mount token, image pull secrets.
It supersedes the stale PR #357.
### Benefits
Users can deploy Gitea with more fine-tuned security settings.
### Applicable issues
- related to #448
### Additional information
I've bumped the helm-unittest plugin in the CI build, to be able to use the `exists` and `notExists` feature in the new tests.
### Checklist
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/451
Reviewed-by: pat-s <pat-s@noreply.gitea.com>
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Co-committed-by: justusbunsi <sk.bunsenbrenner@gmail.com>
fix#396
Set the default of `$HOME` to `/data/gitea/git` for rootless images to make chart openshift compliant.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/447
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
fix#31
First stab, need to iterate most likely.
@techknowlogick @lunny Could one of you add the GPG secrets here so the signing can be tested?
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/427
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
Signed-off-by: Cyril Jouve <jv.cyril@gmail.com>
<!--
Before you open the request please review the following guidelines and tips to help it be more easily integrated:
- Describe the scope of your change - i.e. what the change does.
- Describe any known limitations with your change.
- Please run any tests or examples that can exercise your modified code.
Thank you for contributing! We will try to review, test and integrate the change as soon as we can.
-->
### Description of the change
<!-- Describe the scope of your change - i.e. what the change does. -->
add a new value `extraDeploy` to add arbitrary resources
inspired by bitnami charts ([example](https://github.com/bitnami/charts/blob/main/bitnami/postgresql/values.yaml#L58)
### Benefits
<!-- What benefits will be realized by the code change? -->
with the change, I can deploy additional resources and keep them consistent with the chart (reuse macro, same labels, etc)., same workflow (helm upgrade), etc
### Possible drawbacks
<!-- Describe any known limitations with your change -->
### Additional information
<!-- If there's anything else that's important and relevant to your pull request, mention that information here. Please remove this section if it remains empty. -->
### Checklist
<!-- [Place an '[X]' (no spaces) in all applicable fields. Please remove unrelated fields.] -->
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
Co-authored-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/441
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: Cyril Jouve <jv.cyril@gmail.com>
Co-committed-by: Cyril Jouve <jv.cyril@gmail.com>
Fix#376
Editors should do the job of soft-wrapping in case a line get's too long.
One sentence per line simplifies reviews and diffs a lot as it let's one comment on a piece of text that is contextually sound and not split over multiple lines.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/440
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
@lunny
It still looks like that the IAM user does not have enough permissions for the S3 sync operation.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/438
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
Unclear why it only appeared now and not earlier.
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/434
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
Broken since a long time and probably not used by anyone
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/435
Reviewed-by: techknowlogick <techknowlogick@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
Supersedes stalled #362
I opted for defining `requests` while leaving `limits` open. This might help for scheduling without restricting performance during init.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/423
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
This might hopefully help with the formatting issues around `Chart.lock`.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/424
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
@justusbunsi to end my formatting mess... ;)
I am not fully sure myself about the linebreaks in `values.yaml` but I don't think there's an easy way to change that behavior.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/413
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
and format YAML
(maybe we should also update the maintainers list if some are not active anymore?)
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/411
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
And allow overriding the `image` section so users could possible also use other image tags.
fix#285
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/422
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
### Description of the change
Removes checks for mariadb and mysql from _helpers.tpl
### Benefits
Fixes the helm-chart version 8.0.0 if using a external database
### Applicable issues
- fixes#420
- fixes#419
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/421
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: John Olheiser <john+gitea@jolheiser.com>
Reviewed-by: delvh <dev.lh@web.de>
Reviewed-by: yardenshoham <yardenshoham@noreply.gitea.io>
Co-authored-by: Maximilian Marschall <maximilian.marschall@3xm.at>
Co-committed-by: Maximilian Marschall <maximilian.marschall@3xm.at>
As discussed in Discord.
Supersedes #412 and #407.
**⚠️ BREAKING**
Users depending on the built-in MySQL or MariaDB chart have to switch to an self-managed database, or Postgres
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/417
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: John Olheiser <john+gitea@jolheiser.com>
Reviewed-by: yardenshoham <yardenshoham@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
See discussion in #387
Upgrade notes to Chart v11.x and Postgres 14.x: https://docs.bitnami.com/kubernetes/infrastructure/postgresql/administration/upgrade/
The current version in Gitea is using `11.11.0-debian-10-r62` from 2021-04.
Bumping the chart to the latest (v12.x) would use the image `15.2.0-debian-11-r14` which would be a jump from postgres 11 to postgres 15. There are no specific notes for the v12.x chart release, hence we might be able to just go to 12.x directly.
There have been some param renamings which I've reflected in the README.
**⚠️ BREAKING**
Users have to migrate their Postgres DB by e.g. restoring a previously created database dump into a clean installation.
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/391
Reviewed-by: techknowlogick <techknowlogick@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
### Description of the change
Switch to official `helm-unittest` which is now alive again at https://github.com/helm-unittest/helm-unittest
### Applicable issues
- ref #199
### Checklist
<!-- [Place an '[X]' (no spaces) in all applicable fields. Please remove unrelated fields.] -->
- [ ] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
- [ ] Breaking changes are documented in the `README.md`
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/410
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
Co-committed-by: Michael Kriese <michael.kriese@visualon.de>
### Description of the change
Fix a wrong reference to `signing.existingKey`, `signing.existingSecret` was what was meant and what is used in the chart.
### Benefits
Less confusion when trying to use the Helm chart.
### Possible drawbacks
Evangelists of `existingKey` storming the barricades even though `existingKey` is long dead.
### Applicable issues
None, nobody noticed enough to care, apparently.
Co-authored-by: Tobias Wolter <towo@towo.eu>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/415
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: towo <towo@noreply.gitea.io>
Co-committed-by: towo <towo@noreply.gitea.io>
### Description of the change
Make the test-connection Pod optional and override the wget container's image.
### Benefits
Allows users to enable/disabled the test-connection Pod and override the wget container's image.
### Checklist
- [X] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
- [X] Breaking changes are documented in the `README.md`
Co-authored-by: Umer Anwar <umer.anwar@nuance.com>
Co-authored-by: ooms97 <anwarumer97@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/360
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: ooms97 <ooms97@noreply.gitea.io>
Co-committed-by: ooms97 <ooms97@noreply.gitea.io>
Some small formatting changes which are auto-applied by the markdown code styler in vscode (which I am using a lot).
These are also present in #407.
Merging this before/in general would help be a bit when tinkering with the README.
Mainly indentation related, plus some single quotes -> double quotes changes.
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/408
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: techknowlogick <techknowlogick@noreply.gitea.io>
Co-authored-by: pat-s <pat-s@noreply.gitea.io>
Co-committed-by: pat-s <pat-s@noreply.gitea.io>
### Description of the change
It is required to add custom mapping between hostnames and IP addresses for the gitea pods to be able to access external services like oauth providers or webhook servers.
It is common to take global variables for the entires and set them using hostAliases in the pod template.
### Benefits
Give us more flexibility when using gitea in various network environments.
### Applicable issues
- fixes#400
### Checklist
- [X] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
Co-authored-by: Taekyun Kim <tkq.kim@samsung.com>
Co-authored-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/401
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: podain77 <podain77@noreply.gitea.io>
Co-committed-by: podain77 <podain77@noreply.gitea.io>
