### Description of the change
Update default params of chart dependencies. Tested with multiple upgrades and fresh installations.
Using no password auth for redis simplifies things for basic installations. Production installations should properly configure auth as they need it.
### Benefits
To avoid/solve upgrading issues as in #407 and #472
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/473
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
# Changes
A big shoutout to @luhahn for all his work in #205 which served as the base for this PR.
## Documentation
- [x] After thinking for some time about it, I still prefer the distinct option (as started in #350), i.e. having a standalone "HA" doc under `docs/ha-setup.md` to not have a very long README (which is already quite long).
Most of the information below should go into it with more details and explanations behind all of the individual components.
## Chart deps
~~- Adds `meilisearch` as a chart dependency for a HA-ready issue indexer. Only works with >= Gitea 1.20~~
~~- Adds `redis` as a chart dependency for a HA-ready session and queue store.~~
- Adds `redis-cluster` as a chart dependency for a HA-ready session and queue store (alternative to `redis`). Only works with >= Gitea 1.19.2.
- Removes `memcached` instead of `redis-cluster`
- Add `postgresql-ha` as default DB dep in favor of `postgres`
## Adds smart HA chart logic
The goal is to set smart config values that result in a HA-ready Gitea deployment if `replicaCount` > 1.
- If `replicaCount` > 1,
- `gitea.config.session.PROVIDER` is automatically set to `redis-cluster`
- `gitea.config.indexer.REPO_INDEXER_ENABLED` is automatically set to `false` unless the value is `elasticsearch` or `meilisearch`
- `redis-cluster` is used for `[queue]` and `[cache]` and `[session]`mode or not
Configuration of external instances of `meilisearch` and `minio` are documented in a new markdown doc.
## Deployment vs Statefulset
Given all the discussions about this lately (#428), I think we could use both.
In the end, we do not have the requirement for a sequential pod scale up/scale down as it would happen in statefulsets.
On the other side, we do not have actual stateless pods as we are attaching a RWX to the deployment.
Yet I think because we do not have a leader-election requirement, spawning the pods as a deployment makes "Rolling Updates" easier and also signals users that there is no "leader election" logic and each pod can just be "destroyed" at anytime without causing interruption.
Hence I think we should be able to switch from a statefulset to a deployment, even in the single-replica case.
This change also brought up a templating/linting issue: the definition of `.Values.gitea.config.server.SSH_LISTEN_PORT` in `ssh-svc.yaml` just "luckily" worked so far due to naming-related lint processing. Due to the change from "statefulset" to "deployment", the processing queue changed and caused a failure complaining about `config.server.SSH_LISTEN_PORT` not being defined yet.
The only way I could see to fix this was to "properly" define the value in `values.yaml` instead of conditionally definining it in `helpers.tpl`. Maybe there's a better way?
## Chart PVC Creation
I've adapted the automated PVC creation from another chart to be able to provide the `storageClassName` as I couldn't get dynamic provisioning for EFS going with the current implementation.
In addition the naming and approach within the Gitea chart for PV creation is a bit unusual and aligning it might be beneficial.
A semi-unrelated change which will result in a breaking change for existing users but this PR includes a lot of breaking changes already, so including another one might not make it much worse...
- New `persistence.mount`: whether to mount an existing PVC (via `persistence.existingClaim`
- New `persistence.create`: whether to create a new PVC
## Testing
As this PR does a lot of things, we need proper testing.
The helm chart can be installed from the Git branch via `helm-git` as follows:
```
helm repo add gitea-charts git+https://gitea.com/gitea/helm-chart@/?ref=deployment
helm install gitea --version 0.0.0
```
It is **highly recommended** to test the chart in a dedicated namespace.
I've tested this myself with both `redis` and `redis-cluster` and it seemed to work fine.
I just did some basic operations though and we should do more niche testing before merging.
Examplary `values.yml` for testing (only needs a valid RWX storage class):
<details>
<summary>values.yaml</summary>
```yml
image:
tag: "dev"
PullPolicy: "Always"
rootless: true
replicaCount: 2
persistence:
enabled: true
accessModes:
- ReadWriteMany
storageClass: FIXME
redis-cluster:
enabled: false
global:
redis:
password: gitea
gitea:
config:
indexer:
ISSUE_INDEXER_ENABLED: true
REPO_INDEXER_ENABLED: false
```
</details>
## Preferred setup
The preferred HA setup with respect to performance and stability might currently be as follows:
- Repos: RWX (e.g. EFS or Azurefiles NFS)
- Issue indexer: Meilisearch (HA)
- Session and cache: Redis Cluster (HA)
- Attachments/Avatars: Minio (HA)
This will result in a ~ 10-pod HA setup overall.
All pods have very low resource requests.
fix#98
Co-authored-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/437
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
### Description of the change
Change env-to-ini prefix and remove custom prefix.
`GITEA` is the default prefix.
### Benefits
Compatibility wit v1.20 (`-p` got removed)
### Possible drawbacks
None
### Additional information
See https://github.com/go-gitea/gitea/pull/25799
Tested with Gitea < 1.20 and >= 1.20
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/464
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
<!--
Before you open the request please review the following guidelines and tips to help it be more easily integrated:
- Describe the scope of your change - i.e. what the change does.
- Describe any known limitations with your change.
- Please run any tests or examples that can exercise your modified code.
Thank you for contributing! We will try to review, test and integrate the change as soon as we can.
-->
### Description of the change
Add documentation how to add custom themes
### Benefits
<!-- What benefits will be realized by the code change? -->
### Possible drawbacks
<!-- Describe any known limitations with your change -->
### Applicable issues
<!-- Enter any applicable Issues here (You can reference an issue using #). Please remove this section if there is no referenced issue. -->
- fixes#301
### Additional information
<!-- If there's anything else that's important and relevant to your pull request, mention that information here. Please remove this section if it remains empty. -->
### Checklist
<!-- [Place an '[X]' (no spaces) in all applicable fields. Please remove unrelated fields.] -->
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
- [x] Breaking changes are documented in the `README.md`
- [x] Templating unittests are added
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/460
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
### Description of the change
- Add ToC to README for easier navigation (and add note to `contributing.md`)
- Fix some heading levels in README
- Put upgrading notes into collapsible blocks
- Format `contributing.md` according to MD rules
- Allow `details` and `summary` elements in README
- Allow for longer headings
### Benefits
Better documentation
### Possible drawbacks
None
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/461
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
Should help users with their move from PG 11 to 15. Thanks again @pi3ch!
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/458
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.com>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
### Description of the change
This adds a new values object `serviceAccount`, that allows creating a dedicated ServiceAccount with the Helm Release into the cluster. It supports all common options like labels, annotations, name override (or referring to an externally created ServiceAccount), auto-mount token, image pull secrets.
It supersedes the stale PR #357.
### Benefits
Users can deploy Gitea with more fine-tuned security settings.
### Applicable issues
- related to #448
### Additional information
I've bumped the helm-unittest plugin in the CI build, to be able to use the `exists` and `notExists` feature in the new tests.
### Checklist
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/451
Reviewed-by: pat-s <pat-s@noreply.gitea.com>
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Co-committed-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Signed-off-by: Cyril Jouve <jv.cyril@gmail.com>
<!--
Before you open the request please review the following guidelines and tips to help it be more easily integrated:
- Describe the scope of your change - i.e. what the change does.
- Describe any known limitations with your change.
- Please run any tests or examples that can exercise your modified code.
Thank you for contributing! We will try to review, test and integrate the change as soon as we can.
-->
### Description of the change
<!-- Describe the scope of your change - i.e. what the change does. -->
add a new value `extraDeploy` to add arbitrary resources
inspired by bitnami charts ([example](https://github.com/bitnami/charts/blob/main/bitnami/postgresql/values.yaml#L58)
### Benefits
<!-- What benefits will be realized by the code change? -->
with the change, I can deploy additional resources and keep them consistent with the chart (reuse macro, same labels, etc)., same workflow (helm upgrade), etc
### Possible drawbacks
<!-- Describe any known limitations with your change -->
### Additional information
<!-- If there's anything else that's important and relevant to your pull request, mention that information here. Please remove this section if it remains empty. -->
### Checklist
<!-- [Place an '[X]' (no spaces) in all applicable fields. Please remove unrelated fields.] -->
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
Co-authored-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/441
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: Cyril Jouve <jv.cyril@gmail.com>
Co-committed-by: Cyril Jouve <jv.cyril@gmail.com>
Fix#376
Editors should do the job of soft-wrapping in case a line get's too long.
One sentence per line simplifies reviews and diffs a lot as it let's one comment on a piece of text that is contextually sound and not split over multiple lines.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/440
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
Supersedes stalled #362
I opted for defining `requests` while leaving `limits` open. This might help for scheduling without restricting performance during init.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/423
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
And allow overriding the `image` section so users could possible also use other image tags.
fix#285
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/422
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
As discussed in Discord.
Supersedes #412 and #407.
**⚠️ BREAKING**
Users depending on the built-in MySQL or MariaDB chart have to switch to an self-managed database, or Postgres
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/417
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: John Olheiser <john+gitea@jolheiser.com>
Reviewed-by: yardenshoham <yardenshoham@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
See discussion in #387
Upgrade notes to Chart v11.x and Postgres 14.x: https://docs.bitnami.com/kubernetes/infrastructure/postgresql/administration/upgrade/
The current version in Gitea is using `11.11.0-debian-10-r62` from 2021-04.
Bumping the chart to the latest (v12.x) would use the image `15.2.0-debian-11-r14` which would be a jump from postgres 11 to postgres 15. There are no specific notes for the v12.x chart release, hence we might be able to just go to 12.x directly.
There have been some param renamings which I've reflected in the README.
**⚠️ BREAKING**
Users have to migrate their Postgres DB by e.g. restoring a previously created database dump into a clean installation.
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/391
Reviewed-by: techknowlogick <techknowlogick@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
### Description of the change
Fix a wrong reference to `signing.existingKey`, `signing.existingSecret` was what was meant and what is used in the chart.
### Benefits
Less confusion when trying to use the Helm chart.
### Possible drawbacks
Evangelists of `existingKey` storming the barricades even though `existingKey` is long dead.
### Applicable issues
None, nobody noticed enough to care, apparently.
Co-authored-by: Tobias Wolter <towo@towo.eu>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/415
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: towo <towo@noreply.gitea.io>
Co-committed-by: towo <towo@noreply.gitea.io>
### Description of the change
Make the test-connection Pod optional and override the wget container's image.
### Benefits
Allows users to enable/disabled the test-connection Pod and override the wget container's image.
### Checklist
- [X] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
- [X] Breaking changes are documented in the `README.md`
Co-authored-by: Umer Anwar <umer.anwar@nuance.com>
Co-authored-by: ooms97 <anwarumer97@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/360
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: ooms97 <ooms97@noreply.gitea.io>
Co-committed-by: ooms97 <ooms97@noreply.gitea.io>
Some small formatting changes which are auto-applied by the markdown code styler in vscode (which I am using a lot).
These are also present in #407.
Merging this before/in general would help be a bit when tinkering with the README.
Mainly indentation related, plus some single quotes -> double quotes changes.
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/408
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: techknowlogick <techknowlogick@noreply.gitea.io>
Co-authored-by: pat-s <pat-s@noreply.gitea.io>
Co-committed-by: pat-s <pat-s@noreply.gitea.io>
### Description of the change
It is required to add custom mapping between hostnames and IP addresses for the gitea pods to be able to access external services like oauth providers or webhook servers.
It is common to take global variables for the entires and set them using hostAliases in the pod template.
### Benefits
Give us more flexibility when using gitea in various network environments.
### Applicable issues
- fixes#400
### Checklist
- [X] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
Co-authored-by: Taekyun Kim <tkq.kim@samsung.com>
Co-authored-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/401
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: podain77 <podain77@noreply.gitea.io>
Co-committed-by: podain77 <podain77@noreply.gitea.io>
This reverts d5ce1a47eaad935ea709b7a03bfdf6c69bac8f32 and therefore adds the GPG feature back into main.
As it is a breaking change, this PR now also contains the required upgrade notes.
Closes#107 again.
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/374
Reviewed-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-by: John Olheiser <john+gitea@jolheiser.com>
Feature #343 happens to be a breaking change when enabling `.Values.signing` but not specifying
any of the new private key properties. Tag `v6.0.2` is therefore not following semantic versioning.
This temporarily reverts commit b8f0310c43bd71dd48ac92b70d8ebdb94d43c29b and a fix-up commit 57a1cd27d9a6cc014f425fabeadb0db34f242b0e
to retag 6.0.2 as 6.0.3.
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/373
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
### Description of the change
This PR adds support for gpg key setup. It allows to pass the gpg private key content inline inside `values.yaml` or refer to an existing secret containing the key content data.
### Benefits
Administrators don't need to manually setup the gpg environment from inside a running container. It also eliminates the breaking change of Gitea 1.17 regarding `[git].HOME` as the `GNUPGHOME` environment variable is used consistently to relocate the `.gnupg` directory to its former location.
### Applicable issues
- fixes#107
### Additional information
This PR add the first unit tests to this Helm Chart, ensuring templating integrity for signing related configuration.
### Checklist
- [x] Parameters are documented in the `values.yaml` and added to the `README.md` using [readme-generator-for-helm](https://github.com/bitnami-labs/readme-generator-for-helm)
Co-authored-by: justusbunsi <sk.bunsenbrenner@gmail.com>
Co-authored-by: pat-s <pat-s@noreply.gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/343
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Description of the change
Mostly, this change just moves the changelog to the bottom of the README which helps new users to see the actual documentation. As the structure for the changes itself is slightly different, there are some changes in wording so that it still makes sense. But mostly structural changes.
The change within the dependency section is due to a broken link since auto-generating the parameters section. Now there are links to every dependency related parameters.
Benefits
It helps us to maintain a clear structure for the README of this project.
Possible drawbacks
Our users are currently trained to look at the top of the document to see the changes. They now have to scroll down or use the quick link from installation section.
Applicable issues
fixes#247
Additional information
Every version section starts with a disclaimer right now. This is duplicated and might hide important text due to its existence. A centralized intruduction at top of the upgrading section tells the reader what to expect from that whole section.
I've also noticed that on ArtifactHub the emotes are not rendered correctly. So I replaced them with the actual ones and reduced their usage. That way it better highlights those parts the reader must not miss.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/331
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Description of the change
Add support for a new value: dnsConfig, to be passed to the statefulset pod template configuration.
Default is {}, and does not change anything from current default pod configuration.
Benefits
Ability to fix some issues encountered with Alpine-based docker images, which may break DNS resolving on some clusters.
In particular, this allows to lower the ndots value, which fixes DNS resolving of FQDNs.
dnsConfig:
options:
- name: ndots
value: "1"
Also, with this setting, one can set other parameters to finely tune DNS configuration for Gitea pods, if needed:
https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/#pod-dns-config
Possible drawbacks
None.
Additional information
Some relevant links about the issue this setting allows to fix:
https://stackoverflow.com/questions/65181012/does-alpine-have-known-dns-issue-within-kuberneteshttps://gitlab.alpinelinux.org/alpine/aports/-/issues/9017
Checklist
Parameters are documented in the values.yaml and added to the README.md using readme-generator-for-helm
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/329
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Co-authored-by: dek <dek@noreply.gitea.io>
Co-committed-by: dek <dek@noreply.gitea.io>
To enable access to e.g. the SSH port by IPv6, the selection of ipFamilyPolicy and ipFamilies service attributes is necessary. Enable the possibility to configure these by helm values.
Co-authored-by: Sven Fischer <sven@leiderfischer.de>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/313
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Co-authored-by: svenihoney <svenihoney@noreply.gitea.io>
Co-committed-by: svenihoney <svenihoney@noreply.gitea.io>
Fixes#314
Right now, the gitea StatefulSet does not allow any annotations to be configured via the helmchart - see https://gitea.com/gitea/helm-chart/src/tag/v5.0.4/templates/gitea/statefulset.yaml#L4-L6
My use case:
I am trying to use Reloader (https://github.com/stakater/Reloader) so that I can configure my values.yaml such that i can set some annotations on the StatefulSet and thus Reloader can rollout a restart of gitea StatefulSet whenever a watched secret or configmap is updated.
Co-authored-by: Tarun Gupta Akirala <tarugupta.92@gmail.com>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/315
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: takirala <takirala@noreply.gitea.io>
Co-committed-by: takirala <takirala@noreply.gitea.io>
This PR improves the handling and injection into _app.ini_ of user defined environment variables via env-to-ini script.
Fixes#297
Co-authored-by: Lucas Hahn <lucas.hahn@novum-rgi.de>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/298
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: 6543 <6543@obermui.de>
- Drop super legacy `image.version` value (see #92 description)
- Always use `appVersion` from Chart.yaml as image tag if non specified
---
Don't know whether this is a breaking change regarding image.version
drop.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/250
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
This fixes my feature request (#275) to support hostPort to expose the ssh port.
Co-authored-by: alex <alex@zengers.de>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/276
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-authored-by: a-zen <a-zen@noreply.gitea.io>
Co-committed-by: a-zen <a-zen@noreply.gitea.io>
As discussed in #286, an example for using Kubernetes secrets as additional configuration source was missing. This adds it.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/294
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
I saw a few PRs including this. Maybe it's good to have this as fast as possible to prevent others providing this fix, too.
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/295
Reviewed-by: luhahn <luhahn@noreply.gitea.io>
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: justusbunsi <justusbunsi@noreply.gitea.io>
Co-committed-by: justusbunsi <justusbunsi@noreply.gitea.io>
We did not mention the multiple LDAP Sources as a breaking change.
Co-authored-by: Lucas Hahn <lucas.hahn@novum-rgi.de>
Reviewed-on: https://gitea.com/gitea/helm-chart/pulls/271
Reviewed-by: justusbunsi <justusbunsi@noreply.gitea.io>
Reviewed-by: Andrew Thornton <art27@cantab.net>
